To generate a test set for a given circuit (including both combinational and sequential circuits), choice of an algorithm within a number of existing test generation algorithms to apply is bound to vary from circuit t...To generate a test set for a given circuit (including both combinational and sequential circuits), choice of an algorithm within a number of existing test generation algorithms to apply is bound to vary from circuit to circuit. In this paper, the genetic algorithms are used to construct the models of existing test generation algorithms in making such choice more easily. Therefore, we may forecast the testability parameters of a circuit before using the real test generation algorithm. The results also can be used to evaluate the efficiency of the existing test generation algorithms. Experimental results are given to convince the readers of the truth and the usefulness of this approach.展开更多
To study the diagnostic problem of Wire-OR （W-O） interconnect fault of PCB （Printed Circuit Board）, five modified boundary scan adaptive algorithms for interconnect test are put forward. These algorithms apply Glo...To study the diagnostic problem of Wire-OR （W-O） interconnect fault of PCB （Printed Circuit Board）, five modified boundary scan adaptive algorithms for interconnect test are put forward. These algorithms apply Global-diagnosis sequence algorithm to replace the equal weight algorithm of primary test, and the test time is shortened without changing the fault diagnostic capability. The descriptions of five modified adaptive test algorithms are presented, and the capability comparison between the modified algorithm and the original algorithm is made to prove the validity of these algorithms.展开更多
This paper deals with the target-fault-oriented test generation of sequential circuits using genetic algorithms. We adopted the concept of multiple phases and proposed four sub-procedures which consist of activation, ...This paper deals with the target-fault-oriented test generation of sequential circuits using genetic algorithms. We adopted the concept of multiple phases and proposed four sub-procedures which consist of activation, propagation and justification phases. The paper focuses on the design of genetic operators and construction of fitness functions which are based on the structure information of circuits. Using ISCAS89 benchmarks, the experiment results of GA were given.展开更多
The main objective of software testing is to have the highest likelihood of finding the most faults with a minimum amount of time and effort. Genetic Algorithm (GA) has been successfully used by researchers in softwar...The main objective of software testing is to have the highest likelihood of finding the most faults with a minimum amount of time and effort. Genetic Algorithm (GA) has been successfully used by researchers in software testing to automatically generate test data. In this paper, a GA is applied using branch coverage criterion to generate the least possible set of test data to test JSC applications. Results show that applying GA achieves better performance in terms of average number of test data?generations, execution time, and percentage of branch coverage.展开更多
A novel interoperability test sequences optimization scheme is proposed in which the genetic algorithm （GA） is used to obtain the minimal-length interoperability test sequences. During our work, the basic interopera...A novel interoperability test sequences optimization scheme is proposed in which the genetic algorithm （GA） is used to obtain the minimal-length interoperability test sequences. During our work, the basic interoperability test sequences are generated based on the minimal-complete-coverage criterion, which removes the redundancy from conformance test sequences. Then interoperability sequences minimization problem can be considered as an instance of the set covering problem, and the GA is applied to remove redundancy in interoperability transitions. The results show that compared to conventional algorithm, the proposed algorithm is more practical to avoid the state space explosion problem, for it can reduce the length of the test sequences and maintain the same transition coverage.展开更多
A novel multi-chip module(MCM) interconnect test generation scheme based on ant algorithm(AA) with mutation operator was presented.By combing the characteristics of MCM interconnect test generation,the pheromone updat...A novel multi-chip module(MCM) interconnect test generation scheme based on ant algorithm(AA) with mutation operator was presented.By combing the characteristics of MCM interconnect test generation,the pheromone updating rule and state transition rule of AA is designed.Using mutation operator,this scheme overcomes ordinary AA’s defects of slow convergence speed,easy to get stagnate,and low ability of full search.The international standard MCM benchmark circuit provided by the MCNC group was used to verify the approach.The results of simulation experiments,which compare to the results of standard ant algorithm,genetic algorithm(GA) and other deterministic interconnecting algorithms,show that the proposed scheme can achieve high fault coverage,compact test set and short CPU time,that it is a newer optimized method deserving research.展开更多
The dominant error source of mobile terminal location in wireless sensor networks （WSNs） is the non-line-of-sight （NLOS） propagation error. Among the algorithms proposed to mitigate the influence of NLOS propagati...The dominant error source of mobile terminal location in wireless sensor networks （WSNs） is the non-line-of-sight （NLOS） propagation error. Among the algorithms proposed to mitigate the influence of NLOS propagation error, residual test （RT） is an efficient one, however with high computational complexity （CC）. An improved algorithm that memorizes the light of sight （LOS） range measurements （RMs） identified memorize LOS range measurements identified residual test （MLSI-RT） is presented in this paper to address this problem. The MLSI-RT is based on the assumption that when all RMs are from LOS propagations, the normalized residual follows the central Chi-Square distribution while for NLOS cases it is non-central. This study can reduce the CC by more than 90%.展开更多
An approach to generating and optimizing test cases is proposed for Web application testing based on user sessions using genetic algorithm. A large volume of meaningful user sessions are obtained after purging their i...An approach to generating and optimizing test cases is proposed for Web application testing based on user sessions using genetic algorithm. A large volume of meaningful user sessions are obtained after purging their irrelevant information by analyzing user logs on the Web server. Most of the redundant user sessions are also removed by the reduction process. For test reuse and test concurrency, it divides the user sessions obtained into different groups, each of which is called a test suite, and then prioritizes the test suites and the test cases of each test suite. So, the initial test suites and test cases, and their initial executing sequences are achieved. However, the test scheme generated by the elementary prioritization is not much approximate to the best one. Therefore, genetic algorithm is employed to optimize the results of grouping and prioritization. Meanwhile, an approach to generating new test cases is presented using crossover. The new test cases can detect faults caused by the use of possible conflicting data shared by different users.展开更多
Based on the sequential probability ratio test(SPRT)developed by Wald,an improved method for successful probability test of missile flight is proposed.A recursive algorithm and its program in Matlab are designed to ca...Based on the sequential probability ratio test(SPRT)developed by Wald,an improved method for successful probability test of missile flight is proposed.A recursive algorithm and its program in Matlab are designed to calculate the real risk level of the sequential test decision and the average number of samples under various test conditions.A concept,that is "rejecting as soon as possible",is put forward and an alternate operation strategy is conducted.The simulation results show that it can reduce the test expenses.展开更多
Safety related accidents of buildings and civil engineering structures have been reported all over the world. With the increasing importance of securing the safety of social infrastructure and optimum performance leve...Safety related accidents of buildings and civil engineering structures have been reported all over the world. With the increasing importance of securing the safety of social infrastructure and optimum performance levels to prevent these accidents, a lot of attention has been concentrated on monitoring performance degradation due to structural defects and deterioration. In this study, the algorithm was developed to evaluate the safety of structures by analyzing signals of time domain and frequency domain, and the developed algorithm was verified through a forced vibration test. From the results of time-domain and frequency-domain data analysis, the damage detection results by each sensor location with a high degree of accuracy were derived in both methods.展开更多
PL/SQL is the most common language for ORACLE database application. It allows the developer to create stored program units (Procedures, Functions, and Packages) to improve software reusability and hide the complexity ...PL/SQL is the most common language for ORACLE database application. It allows the developer to create stored program units (Procedures, Functions, and Packages) to improve software reusability and hide the complexity of the execution of a specific operation behind a name. Also, it acts as an interface between SQL database and DEVELOPER. Therefore, it is important to test these modules that consist of procedures and functions. In this paper, a new genetic algorithm (GA), as search technique, is used in order to find the required test data according to branch criteria to test stored PL/SQL program units. The experimental results show that this was not fully achieved, such that the test target in some branches is not reached and the coverage percentage is 98%. A problem rises when target branch is depending on data retrieved from tables;in this case, GA is not able to generate test cases for this branch.展开更多
A new approach to select anoptimal set of test points is proposed. The described method uses fault-wise table and multi-objective genetic algorithm to find the optimal set of test points. First, the fault-wise table i...A new approach to select anoptimal set of test points is proposed. The described method uses fault-wise table and multi-objective genetic algorithm to find the optimal set of test points. First, the fault-wise table is constructed whose entries are measurements associated with faults and test points. The selection of optimal test points is transformed to the selection of the columns that isolate the rows of the table. Then, four objectives are described according to practical test requirements. The multi-objective genetic algorithm is explained. Finally, the presented approach is illustrated by a practical example. The results indicate that the proposed method can efficiently and accurately find the optimal set of test points and is practical for large scale systems.展开更多
Two new regularization algorithms for solving the first-kind Volterra integral equation, which describes the pressure-rate deconvolution problem in well test data interpretation, are developed in this paper. The main ...Two new regularization algorithms for solving the first-kind Volterra integral equation, which describes the pressure-rate deconvolution problem in well test data interpretation, are developed in this paper. The main features of the problem are the strong nonuniform scale of the solution and large errors (up to 15%) in the input data. In both algorithms, the solution is represented as decomposition on special basic functions, which satisfy given a priori information on solution, and this idea allow us significantly to improve the quality of approximate solution and simplify solving the minimization problem. The theoretical details of the algorithms, as well as the results of numerical experiments for proving robustness of the algorithms, are presented.展开更多
The methods and strategies used to screen for syp-hilis and to confirm initially reactive results can vary significantly across clinical laboratories. While the performance characteristics of these different appro-ach...The methods and strategies used to screen for syp-hilis and to confirm initially reactive results can vary significantly across clinical laboratories. While the performance characteristics of these different appro-aches have been evaluated by multiple studies, there is not, as of yet, a single, universally recommendedalgorithm for syphilis testing. To clarify the currently available options for syphilis testing, this update will summarize the clinical challenges to diagnosis, review the specific performance characteristics of treponemal and non-treponemal tests, and fnally, summarize select studies published over the past decade which have evaluated these approaches. Specifcally, this review will discuss the traditional and reverse sequence syphilis screening algorithms commonly used in the United States, alongside a discussion of the European Centre for Disease Prevention and Control syphilis algorithm. Ultimately, in the United States, the decision of which algorithm to use is largely dependent on laboratory resources, the local incidence of syphilis and patient demographics. Key words： Syphilis; Treponemal infection; Immuno-assay; Reverse sequence screening; Rapid plasma regain; Treponema pallidum particle agglutination test; Automation; Algorithm; Primary infection; Late latent infection展开更多
基金This work was supported by National Natural Science Foundation of China (NSFC) under the grant !No. 69873030
文摘To generate a test set for a given circuit (including both combinational and sequential circuits), choice of an algorithm within a number of existing test generation algorithms to apply is bound to vary from circuit to circuit. In this paper, the genetic algorithms are used to construct the models of existing test generation algorithms in making such choice more easily. Therefore, we may forecast the testability parameters of a circuit before using the real test generation algorithm. The results also can be used to evaluate the efficiency of the existing test generation algorithms. Experimental results are given to convince the readers of the truth and the usefulness of this approach.
文摘To study the diagnostic problem of Wire-OR （W-O） interconnect fault of PCB （Printed Circuit Board）, five modified boundary scan adaptive algorithms for interconnect test are put forward. These algorithms apply Global-diagnosis sequence algorithm to replace the equal weight algorithm of primary test, and the test time is shortened without changing the fault diagnostic capability. The descriptions of five modified adaptive test algorithms are presented, and the capability comparison between the modified algorithm and the original algorithm is made to prove the validity of these algorithms.
文摘This paper deals with the target-fault-oriented test generation of sequential circuits using genetic algorithms. We adopted the concept of multiple phases and proposed four sub-procedures which consist of activation, propagation and justification phases. The paper focuses on the design of genetic operators and construction of fitness functions which are based on the structure information of circuits. Using ISCAS89 benchmarks, the experiment results of GA were given.
文摘The main objective of software testing is to have the highest likelihood of finding the most faults with a minimum amount of time and effort. Genetic Algorithm (GA) has been successfully used by researchers in software testing to automatically generate test data. In this paper, a GA is applied using branch coverage criterion to generate the least possible set of test data to test JSC applications. Results show that applying GA achieves better performance in terms of average number of test data?generations, execution time, and percentage of branch coverage.
文摘A novel interoperability test sequences optimization scheme is proposed in which the genetic algorithm （GA） is used to obtain the minimal-length interoperability test sequences. During our work, the basic interoperability test sequences are generated based on the minimal-complete-coverage criterion, which removes the redundancy from conformance test sequences. Then interoperability sequences minimization problem can be considered as an instance of the set covering problem, and the GA is applied to remove redundancy in interoperability transitions. The results show that compared to conventional algorithm, the proposed algorithm is more practical to avoid the state space explosion problem, for it can reduce the length of the test sequences and maintain the same transition coverage.
文摘A novel multi-chip module(MCM) interconnect test generation scheme based on ant algorithm(AA) with mutation operator was presented.By combing the characteristics of MCM interconnect test generation,the pheromone updating rule and state transition rule of AA is designed.Using mutation operator,this scheme overcomes ordinary AA’s defects of slow convergence speed,easy to get stagnate,and low ability of full search.The international standard MCM benchmark circuit provided by the MCNC group was used to verify the approach.The results of simulation experiments,which compare to the results of standard ant algorithm,genetic algorithm(GA) and other deterministic interconnecting algorithms,show that the proposed scheme can achieve high fault coverage,compact test set and short CPU time,that it is a newer optimized method deserving research.
基金supported by the State Key Program of National Natural Science of China (Grant No.60532030)the New Century Excellent Talents in University (Grant No.NCET-08-0333)the Natural Science Foundation of Shandong Province (Grant No.Y2007G10)
文摘The dominant error source of mobile terminal location in wireless sensor networks （WSNs） is the non-line-of-sight （NLOS） propagation error. Among the algorithms proposed to mitigate the influence of NLOS propagation error, residual test （RT） is an efficient one, however with high computational complexity （CC）. An improved algorithm that memorizes the light of sight （LOS） range measurements （RMs） identified memorize LOS range measurements identified residual test （MLSI-RT） is presented in this paper to address this problem. The MLSI-RT is based on the assumption that when all RMs are from LOS propagations, the normalized residual follows the central Chi-Square distribution while for NLOS cases it is non-central. This study can reduce the CC by more than 90%.
文摘An approach to generating and optimizing test cases is proposed for Web application testing based on user sessions using genetic algorithm. A large volume of meaningful user sessions are obtained after purging their irrelevant information by analyzing user logs on the Web server. Most of the redundant user sessions are also removed by the reduction process. For test reuse and test concurrency, it divides the user sessions obtained into different groups, each of which is called a test suite, and then prioritizes the test suites and the test cases of each test suite. So, the initial test suites and test cases, and their initial executing sequences are achieved. However, the test scheme generated by the elementary prioritization is not much approximate to the best one. Therefore, genetic algorithm is employed to optimize the results of grouping and prioritization. Meanwhile, an approach to generating new test cases is presented using crossover. The new test cases can detect faults caused by the use of possible conflicting data shared by different users.
文摘Based on the sequential probability ratio test(SPRT)developed by Wald,an improved method for successful probability test of missile flight is proposed.A recursive algorithm and its program in Matlab are designed to calculate the real risk level of the sequential test decision and the average number of samples under various test conditions.A concept,that is "rejecting as soon as possible",is put forward and an alternate operation strategy is conducted.The simulation results show that it can reduce the test expenses.
文摘Safety related accidents of buildings and civil engineering structures have been reported all over the world. With the increasing importance of securing the safety of social infrastructure and optimum performance levels to prevent these accidents, a lot of attention has been concentrated on monitoring performance degradation due to structural defects and deterioration. In this study, the algorithm was developed to evaluate the safety of structures by analyzing signals of time domain and frequency domain, and the developed algorithm was verified through a forced vibration test. From the results of time-domain and frequency-domain data analysis, the damage detection results by each sensor location with a high degree of accuracy were derived in both methods.
文摘PL/SQL is the most common language for ORACLE database application. It allows the developer to create stored program units (Procedures, Functions, and Packages) to improve software reusability and hide the complexity of the execution of a specific operation behind a name. Also, it acts as an interface between SQL database and DEVELOPER. Therefore, it is important to test these modules that consist of procedures and functions. In this paper, a new genetic algorithm (GA), as search technique, is used in order to find the required test data according to branch criteria to test stored PL/SQL program units. The experimental results show that this was not fully achieved, such that the test target in some branches is not reached and the coverage percentage is 98%. A problem rises when target branch is depending on data retrieved from tables;in this case, GA is not able to generate test cases for this branch.
基金supported by the Advanced Research Project of a National Department of China under Grant No.51317040102
文摘A new approach to select anoptimal set of test points is proposed. The described method uses fault-wise table and multi-objective genetic algorithm to find the optimal set of test points. First, the fault-wise table is constructed whose entries are measurements associated with faults and test points. The selection of optimal test points is transformed to the selection of the columns that isolate the rows of the table. Then, four objectives are described according to practical test requirements. The multi-objective genetic algorithm is explained. Finally, the presented approach is illustrated by a practical example. The results indicate that the proposed method can efficiently and accurately find the optimal set of test points and is practical for large scale systems.
文摘Two new regularization algorithms for solving the first-kind Volterra integral equation, which describes the pressure-rate deconvolution problem in well test data interpretation, are developed in this paper. The main features of the problem are the strong nonuniform scale of the solution and large errors (up to 15%) in the input data. In both algorithms, the solution is represented as decomposition on special basic functions, which satisfy given a priori information on solution, and this idea allow us significantly to improve the quality of approximate solution and simplify solving the minimization problem. The theoretical details of the algorithms, as well as the results of numerical experiments for proving robustness of the algorithms, are presented.
文摘The methods and strategies used to screen for syp-hilis and to confirm initially reactive results can vary significantly across clinical laboratories. While the performance characteristics of these different appro-aches have been evaluated by multiple studies, there is not, as of yet, a single, universally recommendedalgorithm for syphilis testing. To clarify the currently available options for syphilis testing, this update will summarize the clinical challenges to diagnosis, review the specific performance characteristics of treponemal and non-treponemal tests, and fnally, summarize select studies published over the past decade which have evaluated these approaches. Specifcally, this review will discuss the traditional and reverse sequence syphilis screening algorithms commonly used in the United States, alongside a discussion of the European Centre for Disease Prevention and Control syphilis algorithm. Ultimately, in the United States, the decision of which algorithm to use is largely dependent on laboratory resources, the local incidence of syphilis and patient demographics. Key words： Syphilis; Treponemal infection; Immuno-assay; Reverse sequence screening; Rapid plasma regain; Treponema pallidum particle agglutination test; Automation; Algorithm; Primary infection; Late latent infection
