Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless com...Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.展开更多
The primary synchronization signal and the secondary synchronization signal are respectively used to fulfill the subframe and frame synchronization in the long term evolution （LTE） systems. Based on the assumption t...The primary synchronization signal and the secondary synchronization signal are respectively used to fulfill the subframe and frame synchronization in the long term evolution （LTE） systems. Based on the assumption that the channel frequency response of the primary synchronization signal symbol is nearly the same as that of the secondary synchronization symbol in frequency division duplex-LTE （FDD-LTE）, a new synchronization method is proposed. The frame synchronization success probability is simulated in different wireless channel models and the Mento-Carlo method is used in the simulation. Simulation results show that if the LMMSE channel estimation is adopted, the proposed method is robust at a low signal noise ratio （SNR） scenario and works well when cartier frequency offset and fast Fourier transform （FFT） window timing offset are considered in practical applications. The frame synchronization success probability can still exceed 99% with an SNR of 0 dB when the maximum Doppler shift is very large, which means that this robust frame synchronization method can be applicable in most mobile situations. Simulation results also show that the success probability of the proposed frame synchronization method is higher than that of the method which fulfills the frame synchronization through correlating the received secondary synchronization symbol with local sequences in practical applications.展开更多
Frame and frequency synchronization are essential for orthogonal frequency division multiplexing （OFDM） systems. The frame offset owing to incorrect start point position of the fast Fourier transform （FFT） window,...Frame and frequency synchronization are essential for orthogonal frequency division multiplexing （OFDM） systems. The frame offset owing to incorrect start point position of the fast Fourier transform （FFT） window, and the carrier frequency offset （CFO） due to Doppler frequency shift or the frequency mismatch between the transmitter and receiver oscil ators, can bring severe inter-symbol interference （ISI） and inter-carrier interference （ICI） for the OFDM system. Relying on the relatively good correlation charac-teristic of the pseudo-noise （PN） sequence, a joint frame offset and normalized CFO estimation algorithm based on PN preamble in time domain is developed to realize the frame and frequency synchronization in the OFDM system. By comparison, the perfor-mances of the traditional algorithm and the improved algorithm are simulated under different conditions. The results indicate that the PN preamble based algorithm both in frame offset estimation and CFO estimation is more accurate, resource-saving and robust even under poor channel condition, such as low signal-to-noise ratio （SNR） and large normalized CFO.展开更多
In time division multiple access (TDMA) communication systems, correctly estimating the synchronization parameters is very important for reliable data transfer. The algorithms used for frequency/phase and symbol timin...In time division multiple access (TDMA) communication systems, correctly estimating the synchronization parameters is very important for reliable data transfer. The algorithms used for frequency/phase and symbol timing estimates are generally accepted as knowing the start of signal (SoS) parameter. Therefore, within these parameters, the SoS parameter is of particularly great importance. In this study, a reduced version of the SoS estimation algorithm introduced by Hosseini and Perrins is presented to estimate SoS for Gaussian Minimum Shift Keying (GMSK) modulated signals in burst format over additive white Gaussian noise (AWGN) channels. The reduced algorithm can be implemented on FPGA by using half the number of complex multipliers that would be required by the double correlation method and is robust to carrier frequency/phase errors. Simulations performed under 0.1 normalized frequency offset conditions show that the proposed algorithm has a probability of false lock which is less than 7×10-2, even at 0 dB SNR level.展开更多
Based on the frame structure of intermediate data rate （IDR） modem for satellite communication, a new method for searching frame synchronization called group frame synchronization is proposed. At the same time, a ca...Based on the frame structure of intermediate data rate （IDR） modem for satellite communication, a new method for searching frame synchronization called group frame synchronization is proposed. At the same time, a candidate scheme in the classical frame synchronization and two candidate schemes in the group frame synchronization are presented, and the circuits for each scheme are designed in order to abstract the frame alignment signals from received data. Their implementation complexity and performances are also computed and given. Based on the analysis and performance comparison, a reasonable scheme is chosen and then verified through software simulation and hardware impletentation.展开更多
The pilotless frame synchronization approach and implementations of LDPC code are the crucial issue of LDPC decoder. The Maximum-A-Posteriori probability( MAP) decoder has a perfect frame synchronization error rate( F...The pilotless frame synchronization approach and implementations of LDPC code are the crucial issue of LDPC decoder. The Maximum-A-Posteriori probability( MAP) decoder has a perfect frame synchronization error rate( FSER) performance. In this paper,a theoretical derivation of the FSER performance of pilotless frame synchronization for LDPC code is presented. The FSER performance by theoretical analysis coincides well with that by simulation in additive white Gaussian channel and Rician fading channel. So it is estimated the FSER performance of an LDPC code by theoretical analysis can be used instead of the simulations which are much more time-consuming.展开更多
To improve frame synchronization precision, a scheme named training symbol correlation （TSC） is presented for orthogonal frequency division multiplexing （ OFDM ） system. Based on the solution from Schmidl and Cox,...To improve frame synchronization precision, a scheme named training symbol correlation （TSC） is presented for orthogonal frequency division multiplexing （ OFDM ） system. Based on the solution from Schmidl and Cox, a timing metric related to TSC scheme is put forward and examined. The specific method to select a threshold value provides more precise detection results, which can be shown by performance comparison between the two schemes through Monte Carlo simulation. Taking IEEE 802.1 la WLAN standard as an example, the proposed approach is superior to the most popular Schmidl scheme in terms of BER.展开更多
Frame detection is important in burst communication systems for its contribu- tions in frame synchronization. It locates the information bits in the received data stream at receivers. To realize frame detection in the...Frame detection is important in burst communication systems for its contribu- tions in frame synchronization. It locates the information bits in the received data stream at receivers. To realize frame detection in the presence of additive white Gaussian noise （AWGN） and frequency offset, a constant false alarm rate （CFAR） detector is proposed through exploitation of cyclic autocorrelation feature implied in the preamble. The frame detection can be achieved prior to bit timing recovery. The threshold setting is independent of the signal level and noise level by utilizing CFAR method. Mathematical expressions is derived in AWGN channel by considering the probability of false alarm and probability of detection, separately. Given the probability of false alarm, the mathematical relationship between the frame detection performance and EJNo of received signals is established. Ex- perimental results are also presented in accor- dance with analysis.展开更多
DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of c...DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.展开更多
This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctanc...This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctance term, known from analytic calculations and finite element method simulations. With the inductance term identified, the voltage difference between the generator’s no load and load voltage can be calculated and an external circuit can be designed for optimal use of the generator. Two different operation intervals of the linear generator are considered and the results are discussed. The result indicates that time costly finite element simulations can be replaced with simple analytical calculations for a surface mounted permanent magnet linear generator.展开更多
针对单导频结构的正交时频空(orthogonal time frequency and space,OTFS)调制系统接收信号特性,提出了一种基于时延-多普勒域的帧同步算法,该算法无须在发送信号中插入前导码,而是利用单导频OTFS帧结构特征,通过计算接收信号在时延-多...针对单导频结构的正交时频空(orthogonal time frequency and space,OTFS)调制系统接收信号特性,提出了一种基于时延-多普勒域的帧同步算法,该算法无须在发送信号中插入前导码,而是利用单导频OTFS帧结构特征,通过计算接收信号在时延-多普勒域的稀疏度并结合单导频位置的变化对帧同步位置进行判断。仿真实验结果表明,所提方案在高信噪比下有一定性能优势,且随着移动速度的增加,所提方案相较于对比方案的性能优势更加明显,因此,更适合应用于高速甚至超高速移动通信场景中。展开更多
The article presents a novel orthogonal frequency division multiplexing （OFDM） frame synchronization method. The method uses the preamble that contains two identical halves, and the energy difference of the two simi...The article presents a novel orthogonal frequency division multiplexing （OFDM） frame synchronization method. The method uses the preamble that contains two identical halves, and the energy difference of the two similar parts of the received preamble in receiver is used to obtain the frame＇s correct starting point. Furthermore, an improvement of the proposed method is presented, which uses the preamble that can be divided into four similar portions, and the energy difference of the four similar parts of the received preamble in receiver is used to obtain the frame＇s correct starting point. The performances of the frame synchronization methods in multipath channel are compared in terms of mean square error （MSE） obtained by simulations. It can be seen from the simulation results that the proposed methods have better performances than Schmidl＇s, Minn＇s, and Park＇s method in multipath channel.展开更多
基金supported in part by the Sichuan Science and Technology Program(Grant No.2023YFG0316)the Industry-University Research Innovation Fund of China University(Grant No.2021ITA10016)+1 种基金the Key Scientific Research Fund of Xihua University(Grant No.Z1320929)the Special Funds of Industry Development of Sichuan Province(Grant No.zyf-2018-056).
文摘Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.
文摘The primary synchronization signal and the secondary synchronization signal are respectively used to fulfill the subframe and frame synchronization in the long term evolution （LTE） systems. Based on the assumption that the channel frequency response of the primary synchronization signal symbol is nearly the same as that of the secondary synchronization symbol in frequency division duplex-LTE （FDD-LTE）, a new synchronization method is proposed. The frame synchronization success probability is simulated in different wireless channel models and the Mento-Carlo method is used in the simulation. Simulation results show that if the LMMSE channel estimation is adopted, the proposed method is robust at a low signal noise ratio （SNR） scenario and works well when cartier frequency offset and fast Fourier transform （FFT） window timing offset are considered in practical applications. The frame synchronization success probability can still exceed 99% with an SNR of 0 dB when the maximum Doppler shift is very large, which means that this robust frame synchronization method can be applicable in most mobile situations. Simulation results also show that the success probability of the proposed frame synchronization method is higher than that of the method which fulfills the frame synchronization through correlating the received secondary synchronization symbol with local sequences in practical applications.
基金supported by the National Natural Science Foundation of China(6130110561102069)+2 种基金the China Postdoctoral Science Foundation Funded Project(2013M531351)the Nanjing University of Aeronautics and Astronautics Founding(NN2012022)the Open Fund of Graduate Innovated Base(Laboratory)for the Nanjing University of Aeronautics and Astronautics(KFJJ120219)
文摘Frame and frequency synchronization are essential for orthogonal frequency division multiplexing （OFDM） systems. The frame offset owing to incorrect start point position of the fast Fourier transform （FFT） window, and the carrier frequency offset （CFO） due to Doppler frequency shift or the frequency mismatch between the transmitter and receiver oscil ators, can bring severe inter-symbol interference （ISI） and inter-carrier interference （ICI） for the OFDM system. Relying on the relatively good correlation charac-teristic of the pseudo-noise （PN） sequence, a joint frame offset and normalized CFO estimation algorithm based on PN preamble in time domain is developed to realize the frame and frequency synchronization in the OFDM system. By comparison, the perfor-mances of the traditional algorithm and the improved algorithm are simulated under different conditions. The results indicate that the PN preamble based algorithm both in frame offset estimation and CFO estimation is more accurate, resource-saving and robust even under poor channel condition, such as low signal-to-noise ratio （SNR） and large normalized CFO.
文摘In time division multiple access (TDMA) communication systems, correctly estimating the synchronization parameters is very important for reliable data transfer. The algorithms used for frequency/phase and symbol timing estimates are generally accepted as knowing the start of signal (SoS) parameter. Therefore, within these parameters, the SoS parameter is of particularly great importance. In this study, a reduced version of the SoS estimation algorithm introduced by Hosseini and Perrins is presented to estimate SoS for Gaussian Minimum Shift Keying (GMSK) modulated signals in burst format over additive white Gaussian noise (AWGN) channels. The reduced algorithm can be implemented on FPGA by using half the number of complex multipliers that would be required by the double correlation method and is robust to carrier frequency/phase errors. Simulations performed under 0.1 normalized frequency offset conditions show that the proposed algorithm has a probability of false lock which is less than 7×10-2, even at 0 dB SNR level.
文摘Based on the frame structure of intermediate data rate （IDR） modem for satellite communication, a new method for searching frame synchronization called group frame synchronization is proposed. At the same time, a candidate scheme in the classical frame synchronization and two candidate schemes in the group frame synchronization are presented, and the circuits for each scheme are designed in order to abstract the frame alignment signals from received data. Their implementation complexity and performances are also computed and given. Based on the analysis and performance comparison, a reasonable scheme is chosen and then verified through software simulation and hardware impletentation.
基金Supported by the National Natural Science Foundation of China(No.61271230,61472190)the Open Research Fund of National Mobile Communications Research Laboratory,Southeast University(No.2013D02)the Open Research Fund of National Key Laboratory of Electromagnetic Environment,China Research Institute of Radiowave Propagation(No.201500013)
文摘The pilotless frame synchronization approach and implementations of LDPC code are the crucial issue of LDPC decoder. The Maximum-A-Posteriori probability( MAP) decoder has a perfect frame synchronization error rate( FSER) performance. In this paper,a theoretical derivation of the FSER performance of pilotless frame synchronization for LDPC code is presented. The FSER performance by theoretical analysis coincides well with that by simulation in additive white Gaussian channel and Rician fading channel. So it is estimated the FSER performance of an LDPC code by theoretical analysis can be used instead of the simulations which are much more time-consuming.
文摘To improve frame synchronization precision, a scheme named training symbol correlation （TSC） is presented for orthogonal frequency division multiplexing （ OFDM ） system. Based on the solution from Schmidl and Cox, a timing metric related to TSC scheme is put forward and examined. The specific method to select a threshold value provides more precise detection results, which can be shown by performance comparison between the two schemes through Monte Carlo simulation. Taking IEEE 802.1 la WLAN standard as an example, the proposed approach is superior to the most popular Schmidl scheme in terms of BER.
基金supported by National Science Foundation of China under Grant No.61401205
文摘Frame detection is important in burst communication systems for its contribu- tions in frame synchronization. It locates the information bits in the received data stream at receivers. To realize frame detection in the presence of additive white Gaussian noise （AWGN） and frequency offset, a constant false alarm rate （CFAR） detector is proposed through exploitation of cyclic autocorrelation feature implied in the preamble. The frame detection can be achieved prior to bit timing recovery. The threshold setting is independent of the signal level and noise level by utilizing CFAR method. Mathematical expressions is derived in AWGN channel by considering the probability of false alarm and probability of detection, separately. Given the probability of false alarm, the mathematical relationship between the frame detection performance and EJNo of received signals is established. Ex- perimental results are also presented in accor- dance with analysis.
基金The support of the first and fourth authors is given by National Key R&D Program of China,2018YFB0905200.The support for the second and third authors is coming from BIRD171227/17 project of the University of Padova.
文摘DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.
基金The Swedish Research Council for their financial support
文摘This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctance term, known from analytic calculations and finite element method simulations. With the inductance term identified, the voltage difference between the generator’s no load and load voltage can be calculated and an external circuit can be designed for optimal use of the generator. Two different operation intervals of the linear generator are considered and the results are discussed. The result indicates that time costly finite element simulations can be replaced with simple analytical calculations for a surface mounted permanent magnet linear generator.
文摘针对单导频结构的正交时频空(orthogonal time frequency and space,OTFS)调制系统接收信号特性,提出了一种基于时延-多普勒域的帧同步算法,该算法无须在发送信号中插入前导码,而是利用单导频OTFS帧结构特征,通过计算接收信号在时延-多普勒域的稀疏度并结合单导频位置的变化对帧同步位置进行判断。仿真实验结果表明,所提方案在高信噪比下有一定性能优势,且随着移动速度的增加,所提方案相较于对比方案的性能优势更加明显,因此,更适合应用于高速甚至超高速移动通信场景中。
文摘The article presents a novel orthogonal frequency division multiplexing （OFDM） frame synchronization method. The method uses the preamble that contains two identical halves, and the energy difference of the two similar parts of the received preamble in receiver is used to obtain the frame＇s correct starting point. Furthermore, an improvement of the proposed method is presented, which uses the preamble that can be divided into four similar portions, and the energy difference of the four similar parts of the received preamble in receiver is used to obtain the frame＇s correct starting point. The performances of the frame synchronization methods in multipath channel are compared in terms of mean square error （MSE） obtained by simulations. It can be seen from the simulation results that the proposed methods have better performances than Schmidl＇s, Minn＇s, and Park＇s method in multipath channel.
