Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-d...Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.展开更多
Based on the data from 3D seismic surveys,drilling,sidewall coring,thin sections,and tests,this paper analyzes Meso-Cenozoic geotectonic dynamics,buried-hill reservoir characteristics,and differential enrichment patte...Based on the data from 3D seismic surveys,drilling,sidewall coring,thin sections,and tests,this paper analyzes Meso-Cenozoic geotectonic dynamics,buried-hill reservoir characteristics,and differential enrichment patterns of oil and gas in the buried hills,as well as case studies of typical reservoirs,to systematically discuss the conditions required for the formation of buried-hills and reservoirs and accumulations in the large oil and gas fields in deep to ultra-deep composite buried hills in the Bohai Sea..The key findings are as follows.First,deep to ultra-deep composite buried hills developed in the offshore Bohai Bay Basin primarily due to the double-episode destruction of the North China Craton in the Yanshanian and Himalayan.The Tanlu Fault's activity and the destruction of the North China Craton worked together to create the destruction center,which moved and converged episodically from the Bohai Bay Basin's margins towards the Bozhong Sag.This led to the formation of two development zones for composite buried hills and an orderly process of mountain-building within the offshore Bohai Bay Basin and subsequently two development zones for composite buried hills,i.e.the middle and inner rim zones within the Bozhong Depression.Second,under the coupling of favorable lithologies and multi-stage structures,the middle and inner rim zones are favorable for the formation of reservoirs in fluid dissolution-pore/fracture zones underlying the weathering crust.Third,Massive hydrocarbons were produced along the middle and inner rim zones during the Episode Ⅱ craton destruction,which caused overpressure.These hydrocarbons then moved to and accumulated in the composite buried hills.Excellent conditions for the accumulation of hydrocarbons are still present in the interior and lower portions of these buried hills.These results encourage a change in buried hill research to investigate composite buried hills in three dimensions.It should be noted that the multi-stage volcanic structures in the inner rim zone of the Sag and the deep to ultra-deep composite buried hill interiors in the middle rim zone are significant successor areas for further Bohai Sea exploration.展开更多
Based on new data from cores,drilling and logging,combined with extensive rock and mineral testing analysis,a systematic analysis is conducted on the characteristics,diagenesis types,genesis and controlling factors of...Based on new data from cores,drilling and logging,combined with extensive rock and mineral testing analysis,a systematic analysis is conducted on the characteristics,diagenesis types,genesis and controlling factors of deep to ultra-deep abnormally high porosity clastic rock reservoirs in the Oligocene Linhe Formation in the Hetao Basin.The reservoir space of the deep to ultra-deep clastic rock reservoirs in the Linhe Formation is mainly primary pores,and the coupling of three favorable diagenetic elements,namely the rock fabric with strong compaction resistance,weak thermal compaction diagenetic dynamic field,and diagenetic environment with weak fluid compaction-weak cementation,is conducive to the preservation of primary pores.The Linhe Formation clastic rocks have a superior preexisting material composition,with an average total content of 90%for quartz,feldspar,and rigid rock fragments,and strong resistance to compaction.The geothermal gradient in Linhe Depression in the range of(2.0–2.6)°C/100 m is low,and together with the burial history of long-term shallow burial and late rapid deep burial,it forms a weak thermal compaction diagenetic dynamic field environment.The diagenetic environment of the saline lake basin is characterized by weak fluid compaction.At the same time,the paleosalinity has zoning characteristics,and weak cementation in low salinity areas is conducive to the preservation of primary pores.The hydrodynamic conditions of sedimentation,salinity differentiation of ancient water in saline lake basins,and sand body thickness jointly control the distribution of high-quality reservoirs in the Linhe Formation.展开更多
Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present u...Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 MPa),coupled with high salinity of formation water.Consequently,the costs associated with their exploitation and development are exceptionally high.In deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable production.During hydraulic fracturing,a substantial volume of fluid is injected into the reservoir.However,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the reservoir.Therefore,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids involved.The challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant breakage.In addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP conditions.Presently,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate solutions.It's noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic summaries.In light of this,our approach entails initially summarizing the current knowledge pertaining to the types of fracturing fluids employed in deep and ultra-deep reservoirs.Subsequently,we delve into a systematic examination of the damage processes and mechanisms caused by fracturing fluids within the context of hydraulic fracturing in deep reservoirs,taking into account the unique reservoir characteristics of high temperature,high pressure,and high in-situ stress.In addition,we provide an overview of research progress related to high-temperature deep reservoir fracturing fluid and the damage of aqueous fracturing fluids to rock matrix,both artificial and natural fractures,and sand-packed fractures.We conclude by offering a summary of current research advancements and future directions,which hold significant potential for facilitating the efficient development of deep oil and gas reservoirs while effectively mitigating reservoir damage.展开更多
The natural gas generation process is simulated by heating source rocks of the Yacheng Formation, including the onshore-offshore mudstone and coal with kerogens of Type II2-III in the Qiongdongnan Basin. The aim is to...The natural gas generation process is simulated by heating source rocks of the Yacheng Formation, including the onshore-offshore mudstone and coal with kerogens of Type II2-III in the Qiongdongnan Basin. The aim is to quantify the natural gas generation from the Yacheng Formation and to evaluate the geological prediction and kinetic parameters using an optimization procedure based on the basin modeling of the shallow-water area. For this, the hydrocarbons produced have been grouped into four classes（C1, C2, C3 and C4-6）. The results show that the onset temperature of methane generation is predicted to occur at 110℃ during the thermal history of sediments since 5.3 Ma by using data extrapolation. The hydrocarbon potential for ethane, propane and heavy gaseous hydrocarbons（C4-6） is found to be almost exhausted at geological temperature of 200℃ when the transformation ratio（TR） is over 0.8, but for which methane is determined to be about 0.5 in the shallow-water area. In contrast, the end temperature of the methane generation in the deep-water area was over 300℃ with a TR over 0.8. It plays an important role in the natural gas exploration of the deep-water basin and other basins in the broad ocean areas of China. Therefore, the natural gas exploration for the deep-water area in the Qiongdongnan Basin shall first aim at the structural traps in the Ledong, Lingshui and Beijiao sags, and in the forward direction of the structure around the sags, and then gradually develop toward the non-structural trap in the deep-water area basin of the broad ocean areas of China.展开更多
Based on drilling and logging data,as well as geological experiments,the geological characteristics and factors controlling high-yield and enrichment of hydrocarbons in ultra-deep clastic rocks in the Linhe Depression...Based on drilling and logging data,as well as geological experiments,the geological characteristics and factors controlling high-yield and enrichment of hydrocarbons in ultra-deep clastic rocks in the Linhe Depression,Hetao Basin,are studied.The results are obtained in four aspects.First,the inland saline lacustrine high-quality source rocks developed in the Paleogene in the Linhe Depression have the characteristics of early maturity,early expulsion,high hydrocarbon yield,and continuous and efficient hydrocarbon generation,providing an important resource basis for the formation of ultra-high pressure and high-yield reservoirs.Second,the weak compaction,early charging,and weak cementation for pore-preserving,together with the ultra-high pressure for pore-preserving and fracture expansion to improve the permeability,leads to the development of high-quality reservoirs with medium porosity(greater than 15%)and medium permeability(up to 226×10^(-3)μm^(2))in the ultra-deep strata(deeper than 6500 m),which represents a greatly expanded space for oil and gas exploration.Third,the Linhe Formation adjacent to the trough exhibits a low net-to-gross(NTG)and good reservoir-caprock assemblage,and it is overlaid by very thick high-quality mudstone caprock,which are conducive to the continuous and efficient hydrocarbon generation and pressurization and the formation of ultra-high pressure oil and gas reservoirs.Fourth,the most favorable targets for ultra-deep exploration are the zones adjacent to the hydrocarbon generating center of the Paleogene Linhe Formation and with good tectonic setting and structural traps,mainly including the Xinglong faulted structural zone and the Nalinhu faulted buried-hill zone.The significant breakthrough of ultra-deep oil and gas exploration in the Linhe Depression reveals the good potential of ultra-deep clastic rocks in this area,and provides valuable reference for oil and gas exploration of ultra-deep clastic rocks in other areas.展开更多
Ultra-deep reservoirs play an important role at present in fossil energy exploitation.Due to the related high temperature,high pressure,and high formation fracture pressure,however,methods for oil well stimulation do ...Ultra-deep reservoirs play an important role at present in fossil energy exploitation.Due to the related high temperature,high pressure,and high formation fracture pressure,however,methods for oil well stimulation do not produce satisfactory results when conventional fracturing fluids with a low pumping rate are used.In response to the above problem,a fracturing fluid with a density of 1.2~1.4 g/cm^(3)was developed by using Potassium formatted,hydroxypropyl guanidine gum and zirconium crosslinking agents.The fracturing fluid was tested and its ability to maintain a viscosity of 100 mPa.s over more than 60 min was verified under a shear rate of 1701/s and at a temperature of 175℃.This fluid has good sand-carrying performances,a low viscosity after breaking the rubber,and the residue content is less than 200 mg/L.Compared with ordinary reconstruction fluid,it can increase the density by 30%~40%and reduce the wellhead pressure of 8000 m level reconstruction wells.Moreover,the new fracturing fluid can significantly mitigate safety risks.展开更多
The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,hi...The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,high pressure and high stress,fracture development,wellbore instability,drilling fluid lost circulation and other problems faced in the process of deep and ultra-deep complex oil and gas drilling,scholars have developed deep and ultra-deep high-temperature and high-salt resistant water-based drilling fluid technology,high-temperature resistant oil-based/synthetic drilling fluid technology,drilling fluid technology for reservoir protection and drilling fluid lost circulation control technology.However,there are still some key problems such as insufficient resistance to high temperature,high pressure and high stress,wellbore instability and serious lost circulation.Therefore,the development direction of deep and ultra-deep drilling fluid technology in the future is proposed:(1)The technology of high-temperature and high-salt resistant water-based drilling fluid should focus on improving high temperature stability,improving rheological properties,strengthening filtration control and improving compatibility with formation.(2)The technology of oil-based/synthetic drilling fluid resistant to high temperature should further study in the aspects of easily degradable environmental protection additives with low toxicity such as high temperature stabilizer,rheological regulator and related supporting technologies.(3)The drilling fluid technology for reservoir protection should be devoted to the development of new high-performance additives and materials,and further improve the real-time monitoring technology by introducing advanced sensor networks and artificial intelligence algorithms.(4)The lost circulation control of drilling fluid should pay more attention to the integration and application of intelligent technology,the research and application of high-performance plugging materials,the exploration of diversified plugging techniques and methods,and the improvement of environmental protection and production safety awareness.展开更多
Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western sectio...Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.展开更多
The energy model was founded to calculate the critical power of keyhole formation by using the limit principle in CW （ continuous wave ） Nd： YAG laser deep penetration welding process. The model was validated by ex...The energy model was founded to calculate the critical power of keyhole formation by using the limit principle in CW （ continuous wave ） Nd： YAG laser deep penetration welding process. The model was validated by experiments. The results show that ＇.there are two errors between the calculated critical power of keyhole formation and that of experiments ： one is that the calculated results is less than those of experiments, which is caused by not considering the energy loss by heat conduction in the model of keyhole formation. The other is that there is 0. 9 mm error between the axis of the calculated curve of critical power with location of laser focus and that of experimental curve, which is induced by the excursion of laser focus in laser deep penetration welding. At last, the two errors were revised according to the analyses of the errors.展开更多
To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and ...To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.展开更多
Accurately obtaining the original information of an in-situ rock via coring is a significant guiding step for exploring and developing deep oil and gas resources.It is difficult for traditional coring technology and e...Accurately obtaining the original information of an in-situ rock via coring is a significant guiding step for exploring and developing deep oil and gas resources.It is difficult for traditional coring technology and equipment to preserve the original information in deep rocks.This study develops a technology for insitu substance-preserved(ISP),moisture-preserved(IMP),and light-preserved(ILP)coring.This technology stores the original information in real time by forming a solid sealing film on the in-situ sample during coring.This study designed the ISP-IMP-ILP-Coring process and tool.In addition,an ISP-IMP-ILPCoring process simulation system was developed.The effects of temperature,pressure,and film thickness on the quality of the in-situ film were investigated by performing in-situ film-forming simulation experiments.A solid sealing film with a thickness of 2-3 mm can be formed;it completely covers the core sample and has uniform thickness.The film maintains good ISP-IMP-ILP properties and can protect the core sample in the in-situ environment steadily.This study verifies the feasibility of“film formation during coring”technology and provides strong support for the engineering application of ISP-IMP-ILPCoring technology.展开更多
The reservoir properties, diagenetic features and evolution of the Paleogene Shahejie Formation(Es) in the Nanpu sag, Bohai Bay Basin were analyzed based on mineralogical and petrological data, and the main controllin...The reservoir properties, diagenetic features and evolution of the Paleogene Shahejie Formation(Es) in the Nanpu sag, Bohai Bay Basin were analyzed based on mineralogical and petrological data, and the main controlling factors and formation mechanisms of medium to deep high-quality reservoir were revealed by multiple regression analysis. The results show that the sedimentary microfacies, rigid grains content, and dissolution process are the key factors controlling the formation of high-quality clastic reservoir in middle to deep depth in the Nanpu sag. The formation mechanisms of middle to deep sandstones of the Es in different structural belts differ widely in formation mechanism. The Es1(uppermost member of Es) sandstone reservoirs in the Nanpu No.3 structural belt is low porosity, moderate to high permeability reservoir in the mesodiagenesis A2 stage on the whole, and the formation of high-quality reservoirs is mainly attributed to strong compaction resistance ability primarily, and dissolution process secondarily. The Es3(third member of Es) sandstones in Gaoshangpu structural belt is classified as tight sandstones in the mesodiagenesis A1 stage, in which the development of favorable reservoirs is primarily controlled by dissolution. This study provides references for reservoir evaluation of deep clastic reservoirs and exploration deployment in the Bohai Bay rift basin. As there are high-quality reservoirs, it is believed that the deep clastic reservoirs in the eastern of China, such as Bohai Bay Basin still have significant exploration potential.展开更多
Pure shales in the first member of Qingshankou Formation(simplified as Qing 1 Member)in the southern Songliao Basin,i.e.,the semi-deep and deep lacustrine shales,are characterized by a high content of clay minerals an...Pure shales in the first member of Qingshankou Formation(simplified as Qing 1 Member)in the southern Songliao Basin,i.e.,the semi-deep and deep lacustrine shales,are characterized by a high content of clay minerals and poor hydrocarbon mobility,making the development of shale oil difficult.According to the drilling and testing results,the shale of Qing 1 Member can be classified into 3 lithofacies,i.e.,bedded argillaceous shale,laminated diamictite shale,and interbedded felsic shale.The TOC and brittle minerals control the enrichment of shale oil,of them,TOC controls the total oil content,in other words,the total oil content increases with the increase of TOC;while the laminae made up of brittle minerals contain a large number of bigger intergranular pores which are favorable enrichment space for movable shale oil.In consideration of the origins of the 3 lithofacies,two shale oil enrichment models are classified,i.e.,the deep lacustrine high-TOC bedded argillaceous shale(Model-I)and the semi-deep lacustrine moderate-high-TOC laminated diamictite shale(Model-II).In the Model-I,the shale is characterized by high hydrocarbon generation ability,high total oil content,abundant horizontal bedding fractures,and vertical and high angle fractures locally;the complex fracture network formed by horizontal bedding fractures and vertical fractures improve the storage capacity and permeability of the shale reservoir,increase the enrichment space for movable oil.In the Model-II,the shale is characterized by good hydrocarbon generation ability and fairly high total oil content,and as the brittle laminae contain large intergranular pores,the shale has a higher movable oil content.Based on the two models,shale oil sweet-spot areas of 2880 km2 in the southern Songliao Basin are favorable for further exploration.Aimed at the difficulties in reservoir fracturing of the lacustrine shale with a high content of clay minerals,the composite fracturing technology with supercritical carbon dioxide was used in the shale oil reservoir for the first time,realizing large-scale volume fracturing in shale with a high content of clay minerals and strong heterogeneity,marking a breakthrough of oil exploration in continental shale with a high content of clay minerals in China.展开更多
In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot...In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.展开更多
In order to investigate the mechanism of formation of abiogenetic hydrocarbons at the depth of the Earth, experimental research on reactions between carbonates and water or water bearing minerals was carried out at th...In order to investigate the mechanism of formation of abiogenetic hydrocarbons at the depth of the Earth, experimental research on reactions between carbonates and water or water bearing minerals was carried out at the pressure of about 1 GPa and the temperature range of 800-1500℃. The reactions took place in an open and nonequilibrium state. Chromatographic analyses of the gas products indicate that in the experiments there were generated CH 4 dominated hydrocarbons, along with some CO 2 and CO. Accordingly, we think there is no essential distinction between free state water and hydroxy in the minerals in the process of hydrocarbon formation. This study indicates that reactions between carbonates and water or water bearing minerals should be an important factor leading to the formation of abiogenetic hydrocarbons at the Earth’s depth.展开更多
Deep shale layer in the Lower Silurian Longmaxi Formation,southern Sichuan Basin is the major replacement target of shale gas exploration in China.However,the prediction of"sweet-spots"in deep shale gas rese...Deep shale layer in the Lower Silurian Longmaxi Formation,southern Sichuan Basin is the major replacement target of shale gas exploration in China.However,the prediction of"sweet-spots"in deep shale gas reservoirs lacks physical basis due to the short of systematic experimental research on the physical properties of the deep shale.Based on petrological,acoustic and hardness measurements,variation law and control factors of dynamic and static elastic properties of the deep shale samples are investigated.The study results show that the deep shale samples are similar to the middle-shallow shale in terms of mineral composition and pore type.Geochemical characteristics of organic-rich shale samples(TOC>2%)indicate that these shale samples have a framework of microcrystalline quartz grains;the intergranular pores in these shale samples are between rigid quartz grains and have mechanical property of hard pore.The lean-organic shale samples(TOC<2%),with quartz primarily coming from terrigenous debris,feature plastic clay mineral particles as the support frame in rock texture.Intergranular pores in these samples are between clay particles,and show features of soft pores in mechanical property.The difference in microtexture of the deep shale samples results in an asymmetrical inverted V-type change in velocity with quartz content,and the organic-rich shale samples have a smaller variation rate in velocity-porosity and velocity-organic matter content.Also due to the difference in microtexture,the organic-rich shale and organic-lean shale can be clearly discriminated in the cross plots of P-wave impedance versus Poisson’s ratio as well as elasticity modulus versus Poisson’s ratio.The shale samples with quartz mainly coming from biogenic silica show higher hardness and brittleness,while the shale samples with quartz from terrigenous debris have hardness and brittleness less affected by quartz content.The study results can provide a basis for well-logging interpretation and"sweet spot"prediction of Longmaxi Formation shale gas reservoirs.展开更多
As the hydrocarbon generation and storage mechanisms of high quality shales of Upper Ordovician Wufeng Formation– Lower Silurian Longmaxi Formation remain unclear, based on geological conditions and experimental mode...As the hydrocarbon generation and storage mechanisms of high quality shales of Upper Ordovician Wufeng Formation– Lower Silurian Longmaxi Formation remain unclear, based on geological conditions and experimental modelling of shale gas formation, the shale gas generation and accumulation mechanisms as well as their coupling relationships of deep-water shelf shales in Wufeng–Longmaxi Formation of Sichuan Basin were analyzed from petrology, mineralogy, and geochemistry. The high quality shales of Wufeng–Longmaxi Formation in Sichuan Basin are characterized by high thermal evolution, high hydrocarbon generation intensity, good material base, and good roof and floor conditions;the high quality deep-water shelf shale not only has high biogenic silicon content and organic carbon content, but also high porosity coupling. It is concluded that:(1) The shales had good preservation conditions and high retainment of crude oil in the early times, and the shale gas was mainly from cracking of crude oil.(2) The biogenic silicon(opal A) turned into crystal quartz in early times of burial diagenesis, lots of micro-size intergranular pores were produced in the same time;moreover, the biogenic silicon frame had high resistance to compaction, thus it provided the conditions not only for oil charge in the early stage, but also for formation and preservation of nanometer cellular-like pores, and was the key factor enabling the preservation of organic pores.(3) The high quality shale of Wufeng–Longmaxi Formation had high brittleness, strong homogeneity, siliceous intergranular micro-pores and nanometer organic pores, which were conducive to the formation of complicated fissure network connecting the siliceous intergranular nano-pores, and thus high and stable production of shale gas.展开更多
The clastic rocks in the depth of 2800-6000 m of the Paleogene in Jiyang sub-basin had undergone the middle diagenesis and late diagenesis.The reservoirs in main areas of the sub-basin developed 2-6 secondary pores zo...The clastic rocks in the depth of 2800-6000 m of the Paleogene in Jiyang sub-basin had undergone the middle diagenesis and late diagenesis.The reservoirs in main areas of the sub-basin developed 2-6 secondary pores zones.The reservoirs in the stage A of middle diagenesis of Bonan fault zone in Zhanhua depression and of the gentle slope belt of Chezhen depression are controlled by the acidic diagenetic medium and developed one secondary pores zone in each diagenetic sub-stage respectively.The contents ofautogenic quartz,pyrite and kaolinite are quite high in these reservoirs.The reservoirs’展开更多
The deep buried clastic formation of Paleogene is an important hydrocarbon reservoir in the Chezhen depression.There are two types of diagenetic alteration modes in it.The first mode is weak compaction, strong cementa...The deep buried clastic formation of Paleogene is an important hydrocarbon reservoir in the Chezhen depression.There are two types of diagenetic alteration modes in it.The first mode is weak compaction, strong cementation,fracturing and weak dissolution in the sandstone and conglomerate on the steep slope of the depression.The reservoirs are cemented mainly by carbonate minerals strongly。展开更多
基金Supported by the National Natural Science Foundation of ChinaCorporate Innovative Development Joint Fund(U19B6003)。
文摘Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.
基金Supported by the China National Offshore Oil Corporation Project(KJGG2022--0302)。
文摘Based on the data from 3D seismic surveys,drilling,sidewall coring,thin sections,and tests,this paper analyzes Meso-Cenozoic geotectonic dynamics,buried-hill reservoir characteristics,and differential enrichment patterns of oil and gas in the buried hills,as well as case studies of typical reservoirs,to systematically discuss the conditions required for the formation of buried-hills and reservoirs and accumulations in the large oil and gas fields in deep to ultra-deep composite buried hills in the Bohai Sea..The key findings are as follows.First,deep to ultra-deep composite buried hills developed in the offshore Bohai Bay Basin primarily due to the double-episode destruction of the North China Craton in the Yanshanian and Himalayan.The Tanlu Fault's activity and the destruction of the North China Craton worked together to create the destruction center,which moved and converged episodically from the Bohai Bay Basin's margins towards the Bozhong Sag.This led to the formation of two development zones for composite buried hills and an orderly process of mountain-building within the offshore Bohai Bay Basin and subsequently two development zones for composite buried hills,i.e.the middle and inner rim zones within the Bozhong Depression.Second,under the coupling of favorable lithologies and multi-stage structures,the middle and inner rim zones are favorable for the formation of reservoirs in fluid dissolution-pore/fracture zones underlying the weathering crust.Third,Massive hydrocarbons were produced along the middle and inner rim zones during the Episode Ⅱ craton destruction,which caused overpressure.These hydrocarbons then moved to and accumulated in the composite buried hills.Excellent conditions for the accumulation of hydrocarbons are still present in the interior and lower portions of these buried hills.These results encourage a change in buried hill research to investigate composite buried hills in three dimensions.It should be noted that the multi-stage volcanic structures in the inner rim zone of the Sag and the deep to ultra-deep composite buried hill interiors in the middle rim zone are significant successor areas for further Bohai Sea exploration.
基金Supported by the CNPC Science and Technology Project(2023ZZ022023ZZ14-01).
文摘Based on new data from cores,drilling and logging,combined with extensive rock and mineral testing analysis,a systematic analysis is conducted on the characteristics,diagenesis types,genesis and controlling factors of deep to ultra-deep abnormally high porosity clastic rock reservoirs in the Oligocene Linhe Formation in the Hetao Basin.The reservoir space of the deep to ultra-deep clastic rock reservoirs in the Linhe Formation is mainly primary pores,and the coupling of three favorable diagenetic elements,namely the rock fabric with strong compaction resistance,weak thermal compaction diagenetic dynamic field,and diagenetic environment with weak fluid compaction-weak cementation,is conducive to the preservation of primary pores.The Linhe Formation clastic rocks have a superior preexisting material composition,with an average total content of 90%for quartz,feldspar,and rigid rock fragments,and strong resistance to compaction.The geothermal gradient in Linhe Depression in the range of(2.0–2.6)°C/100 m is low,and together with the burial history of long-term shallow burial and late rapid deep burial,it forms a weak thermal compaction diagenetic dynamic field environment.The diagenetic environment of the saline lake basin is characterized by weak fluid compaction.At the same time,the paleosalinity has zoning characteristics,and weak cementation in low salinity areas is conducive to the preservation of primary pores.The hydrodynamic conditions of sedimentation,salinity differentiation of ancient water in saline lake basins,and sand body thickness jointly control the distribution of high-quality reservoirs in the Linhe Formation.
基金Dao-Bing Wang was supported by the Beijing Natural Science Foundation Project(No.3222030)the National Natural Science Foundation of China(No.52274002)+1 种基金the PetroChina Science and Technology Innovation Foundation Project(No.2021DQ02-0201)Fu-Jian Zhou was supported by the National Natural Science Foundation of China(No.52174045).
文摘Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 MPa),coupled with high salinity of formation water.Consequently,the costs associated with their exploitation and development are exceptionally high.In deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable production.During hydraulic fracturing,a substantial volume of fluid is injected into the reservoir.However,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the reservoir.Therefore,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids involved.The challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant breakage.In addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP conditions.Presently,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate solutions.It's noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic summaries.In light of this,our approach entails initially summarizing the current knowledge pertaining to the types of fracturing fluids employed in deep and ultra-deep reservoirs.Subsequently,we delve into a systematic examination of the damage processes and mechanisms caused by fracturing fluids within the context of hydraulic fracturing in deep reservoirs,taking into account the unique reservoir characteristics of high temperature,high pressure,and high in-situ stress.In addition,we provide an overview of research progress related to high-temperature deep reservoir fracturing fluid and the damage of aqueous fracturing fluids to rock matrix,both artificial and natural fractures,and sand-packed fractures.We conclude by offering a summary of current research advancements and future directions,which hold significant potential for facilitating the efficient development of deep oil and gas reservoirs while effectively mitigating reservoir damage.
基金The Western Light Talent Culture Project of the Chinese Academy of Sciences under contract No.Y404RC1the National Petroleum Major Projects of China under contract No.2016ZX05026-007-005+2 种基金the Key Laboratory of Petroleum Resources Research Fund of the Chinese Academy of Sciences under contract No.KFJJ2013-04the Science and Technology Program of Gansu Province under contract No.1501RJYA006the Key Laboratory Project of Gansu Province of China under contract No.1309RTSA041
文摘The natural gas generation process is simulated by heating source rocks of the Yacheng Formation, including the onshore-offshore mudstone and coal with kerogens of Type II2-III in the Qiongdongnan Basin. The aim is to quantify the natural gas generation from the Yacheng Formation and to evaluate the geological prediction and kinetic parameters using an optimization procedure based on the basin modeling of the shallow-water area. For this, the hydrocarbons produced have been grouped into four classes（C1, C2, C3 and C4-6）. The results show that the onset temperature of methane generation is predicted to occur at 110℃ during the thermal history of sediments since 5.3 Ma by using data extrapolation. The hydrocarbon potential for ethane, propane and heavy gaseous hydrocarbons（C4-6） is found to be almost exhausted at geological temperature of 200℃ when the transformation ratio（TR） is over 0.8, but for which methane is determined to be about 0.5 in the shallow-water area. In contrast, the end temperature of the methane generation in the deep-water area was over 300℃ with a TR over 0.8. It plays an important role in the natural gas exploration of the deep-water basin and other basins in the broad ocean areas of China. Therefore, the natural gas exploration for the deep-water area in the Qiongdongnan Basin shall first aim at the structural traps in the Ledong, Lingshui and Beijiao sags, and in the forward direction of the structure around the sags, and then gradually develop toward the non-structural trap in the deep-water area basin of the broad ocean areas of China.
基金Supported by the China National Petroleum Corporation(CNPC)Project(2023ZZ14-01)。
文摘Based on drilling and logging data,as well as geological experiments,the geological characteristics and factors controlling high-yield and enrichment of hydrocarbons in ultra-deep clastic rocks in the Linhe Depression,Hetao Basin,are studied.The results are obtained in four aspects.First,the inland saline lacustrine high-quality source rocks developed in the Paleogene in the Linhe Depression have the characteristics of early maturity,early expulsion,high hydrocarbon yield,and continuous and efficient hydrocarbon generation,providing an important resource basis for the formation of ultra-high pressure and high-yield reservoirs.Second,the weak compaction,early charging,and weak cementation for pore-preserving,together with the ultra-high pressure for pore-preserving and fracture expansion to improve the permeability,leads to the development of high-quality reservoirs with medium porosity(greater than 15%)and medium permeability(up to 226×10^(-3)μm^(2))in the ultra-deep strata(deeper than 6500 m),which represents a greatly expanded space for oil and gas exploration.Third,the Linhe Formation adjacent to the trough exhibits a low net-to-gross(NTG)and good reservoir-caprock assemblage,and it is overlaid by very thick high-quality mudstone caprock,which are conducive to the continuous and efficient hydrocarbon generation and pressurization and the formation of ultra-high pressure oil and gas reservoirs.Fourth,the most favorable targets for ultra-deep exploration are the zones adjacent to the hydrocarbon generating center of the Paleogene Linhe Formation and with good tectonic setting and structural traps,mainly including the Xinglong faulted structural zone and the Nalinhu faulted buried-hill zone.The significant breakthrough of ultra-deep oil and gas exploration in the Linhe Depression reveals the good potential of ultra-deep clastic rocks in this area,and provides valuable reference for oil and gas exploration of ultra-deep clastic rocks in other areas.
文摘Ultra-deep reservoirs play an important role at present in fossil energy exploitation.Due to the related high temperature,high pressure,and high formation fracture pressure,however,methods for oil well stimulation do not produce satisfactory results when conventional fracturing fluids with a low pumping rate are used.In response to the above problem,a fracturing fluid with a density of 1.2~1.4 g/cm^(3)was developed by using Potassium formatted,hydroxypropyl guanidine gum and zirconium crosslinking agents.The fracturing fluid was tested and its ability to maintain a viscosity of 100 mPa.s over more than 60 min was verified under a shear rate of 1701/s and at a temperature of 175℃.This fluid has good sand-carrying performances,a low viscosity after breaking the rubber,and the residue content is less than 200 mg/L.Compared with ordinary reconstruction fluid,it can increase the density by 30%~40%and reduce the wellhead pressure of 8000 m level reconstruction wells.Moreover,the new fracturing fluid can significantly mitigate safety risks.
基金Supported by the Projects of National Natural Science Foundation of China(52288101,52174014,52374023)。
文摘The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,high pressure and high stress,fracture development,wellbore instability,drilling fluid lost circulation and other problems faced in the process of deep and ultra-deep complex oil and gas drilling,scholars have developed deep and ultra-deep high-temperature and high-salt resistant water-based drilling fluid technology,high-temperature resistant oil-based/synthetic drilling fluid technology,drilling fluid technology for reservoir protection and drilling fluid lost circulation control technology.However,there are still some key problems such as insufficient resistance to high temperature,high pressure and high stress,wellbore instability and serious lost circulation.Therefore,the development direction of deep and ultra-deep drilling fluid technology in the future is proposed:(1)The technology of high-temperature and high-salt resistant water-based drilling fluid should focus on improving high temperature stability,improving rheological properties,strengthening filtration control and improving compatibility with formation.(2)The technology of oil-based/synthetic drilling fluid resistant to high temperature should further study in the aspects of easily degradable environmental protection additives with low toxicity such as high temperature stabilizer,rheological regulator and related supporting technologies.(3)The drilling fluid technology for reservoir protection should be devoted to the development of new high-performance additives and materials,and further improve the real-time monitoring technology by introducing advanced sensor networks and artificial intelligence algorithms.(4)The lost circulation control of drilling fluid should pay more attention to the integration and application of intelligent technology,the research and application of high-performance plugging materials,the exploration of diversified plugging techniques and methods,and the improvement of environmental protection and production safety awareness.
基金Supported by the National Natural Science Foundation of China (41902118)Natural Science Foundation of Xinjiang Uygur Autonomous Region (2022D01B141)+1 种基金Natural Science Foundation of Heilongjiang Province (LH2021D003)Heilongjiang Postdoctoral Fund (No.LBH-Z20045)。
文摘Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.
文摘The energy model was founded to calculate the critical power of keyhole formation by using the limit principle in CW （ continuous wave ） Nd： YAG laser deep penetration welding process. The model was validated by experiments. The results show that ＇.there are two errors between the calculated critical power of keyhole formation and that of experiments ： one is that the calculated results is less than those of experiments, which is caused by not considering the energy loss by heat conduction in the model of keyhole formation. The other is that there is 0. 9 mm error between the axis of the calculated curve of critical power with location of laser focus and that of experimental curve, which is induced by the excursion of laser focus in laser deep penetration welding. At last, the two errors were revised according to the analyses of the errors.
基金Supported by the National Natural Science Foundation of China(41872124,42130803)Sinopec Key Science and Technology Project(P20046).
文摘To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.
基金the National Natural Science Foundation of China(grant numbers 51827901,52004166)funded by the Program for Shenzhen Basic Research Program(General Program)(No.JCYJ20190808153416970)Guangdong Introducing Innovative and Enterpreneurial Teams(No.2019ZT08G315)
文摘Accurately obtaining the original information of an in-situ rock via coring is a significant guiding step for exploring and developing deep oil and gas resources.It is difficult for traditional coring technology and equipment to preserve the original information in deep rocks.This study develops a technology for insitu substance-preserved(ISP),moisture-preserved(IMP),and light-preserved(ILP)coring.This technology stores the original information in real time by forming a solid sealing film on the in-situ sample during coring.This study designed the ISP-IMP-ILP-Coring process and tool.In addition,an ISP-IMP-ILPCoring process simulation system was developed.The effects of temperature,pressure,and film thickness on the quality of the in-situ film were investigated by performing in-situ film-forming simulation experiments.A solid sealing film with a thickness of 2-3 mm can be formed;it completely covers the core sample and has uniform thickness.The film maintains good ISP-IMP-ILP properties and can protect the core sample in the in-situ environment steadily.This study verifies the feasibility of“film formation during coring”technology and provides strong support for the engineering application of ISP-IMP-ILPCoring technology.
基金Supported by the China National Science and Technology Major Project (2016ZX05006-006)
文摘The reservoir properties, diagenetic features and evolution of the Paleogene Shahejie Formation(Es) in the Nanpu sag, Bohai Bay Basin were analyzed based on mineralogical and petrological data, and the main controlling factors and formation mechanisms of medium to deep high-quality reservoir were revealed by multiple regression analysis. The results show that the sedimentary microfacies, rigid grains content, and dissolution process are the key factors controlling the formation of high-quality clastic reservoir in middle to deep depth in the Nanpu sag. The formation mechanisms of middle to deep sandstones of the Es in different structural belts differ widely in formation mechanism. The Es1(uppermost member of Es) sandstone reservoirs in the Nanpu No.3 structural belt is low porosity, moderate to high permeability reservoir in the mesodiagenesis A2 stage on the whole, and the formation of high-quality reservoirs is mainly attributed to strong compaction resistance ability primarily, and dissolution process secondarily. The Es3(third member of Es) sandstones in Gaoshangpu structural belt is classified as tight sandstones in the mesodiagenesis A1 stage, in which the development of favorable reservoirs is primarily controlled by dissolution. This study provides references for reservoir evaluation of deep clastic reservoirs and exploration deployment in the Bohai Bay rift basin. As there are high-quality reservoirs, it is believed that the deep clastic reservoirs in the eastern of China, such as Bohai Bay Basin still have significant exploration potential.
基金Supported by the China Geological Survey Project(DD20190115)
文摘Pure shales in the first member of Qingshankou Formation(simplified as Qing 1 Member)in the southern Songliao Basin,i.e.,the semi-deep and deep lacustrine shales,are characterized by a high content of clay minerals and poor hydrocarbon mobility,making the development of shale oil difficult.According to the drilling and testing results,the shale of Qing 1 Member can be classified into 3 lithofacies,i.e.,bedded argillaceous shale,laminated diamictite shale,and interbedded felsic shale.The TOC and brittle minerals control the enrichment of shale oil,of them,TOC controls the total oil content,in other words,the total oil content increases with the increase of TOC;while the laminae made up of brittle minerals contain a large number of bigger intergranular pores which are favorable enrichment space for movable shale oil.In consideration of the origins of the 3 lithofacies,two shale oil enrichment models are classified,i.e.,the deep lacustrine high-TOC bedded argillaceous shale(Model-I)and the semi-deep lacustrine moderate-high-TOC laminated diamictite shale(Model-II).In the Model-I,the shale is characterized by high hydrocarbon generation ability,high total oil content,abundant horizontal bedding fractures,and vertical and high angle fractures locally;the complex fracture network formed by horizontal bedding fractures and vertical fractures improve the storage capacity and permeability of the shale reservoir,increase the enrichment space for movable oil.In the Model-II,the shale is characterized by good hydrocarbon generation ability and fairly high total oil content,and as the brittle laminae contain large intergranular pores,the shale has a higher movable oil content.Based on the two models,shale oil sweet-spot areas of 2880 km2 in the southern Songliao Basin are favorable for further exploration.Aimed at the difficulties in reservoir fracturing of the lacustrine shale with a high content of clay minerals,the composite fracturing technology with supercritical carbon dioxide was used in the shale oil reservoir for the first time,realizing large-scale volume fracturing in shale with a high content of clay minerals and strong heterogeneity,marking a breakthrough of oil exploration in continental shale with a high content of clay minerals in China.
基金Supported by the Sinopec Science and Technology Project(P21040-1).
文摘In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.
文摘In order to investigate the mechanism of formation of abiogenetic hydrocarbons at the depth of the Earth, experimental research on reactions between carbonates and water or water bearing minerals was carried out at the pressure of about 1 GPa and the temperature range of 800-1500℃. The reactions took place in an open and nonequilibrium state. Chromatographic analyses of the gas products indicate that in the experiments there were generated CH 4 dominated hydrocarbons, along with some CO 2 and CO. Accordingly, we think there is no essential distinction between free state water and hydroxy in the minerals in the process of hydrocarbon formation. This study indicates that reactions between carbonates and water or water bearing minerals should be an important factor leading to the formation of abiogenetic hydrocarbons at the Earth’s depth.
基金Supported by the National Natural Science Foundation of China(41774136)China National Science and Technology Major Project(2017ZX05035004)
文摘Deep shale layer in the Lower Silurian Longmaxi Formation,southern Sichuan Basin is the major replacement target of shale gas exploration in China.However,the prediction of"sweet-spots"in deep shale gas reservoirs lacks physical basis due to the short of systematic experimental research on the physical properties of the deep shale.Based on petrological,acoustic and hardness measurements,variation law and control factors of dynamic and static elastic properties of the deep shale samples are investigated.The study results show that the deep shale samples are similar to the middle-shallow shale in terms of mineral composition and pore type.Geochemical characteristics of organic-rich shale samples(TOC>2%)indicate that these shale samples have a framework of microcrystalline quartz grains;the intergranular pores in these shale samples are between rigid quartz grains and have mechanical property of hard pore.The lean-organic shale samples(TOC<2%),with quartz primarily coming from terrigenous debris,feature plastic clay mineral particles as the support frame in rock texture.Intergranular pores in these samples are between clay particles,and show features of soft pores in mechanical property.The difference in microtexture of the deep shale samples results in an asymmetrical inverted V-type change in velocity with quartz content,and the organic-rich shale samples have a smaller variation rate in velocity-porosity and velocity-organic matter content.Also due to the difference in microtexture,the organic-rich shale and organic-lean shale can be clearly discriminated in the cross plots of P-wave impedance versus Poisson’s ratio as well as elasticity modulus versus Poisson’s ratio.The shale samples with quartz mainly coming from biogenic silica show higher hardness and brittleness,while the shale samples with quartz from terrigenous debris have hardness and brittleness less affected by quartz content.The study results can provide a basis for well-logging interpretation and"sweet spot"prediction of Longmaxi Formation shale gas reservoirs.
基金Supported by the China National Science and Technology Major Project(2017ZX05036,2017ZX05036001).
文摘As the hydrocarbon generation and storage mechanisms of high quality shales of Upper Ordovician Wufeng Formation– Lower Silurian Longmaxi Formation remain unclear, based on geological conditions and experimental modelling of shale gas formation, the shale gas generation and accumulation mechanisms as well as their coupling relationships of deep-water shelf shales in Wufeng–Longmaxi Formation of Sichuan Basin were analyzed from petrology, mineralogy, and geochemistry. The high quality shales of Wufeng–Longmaxi Formation in Sichuan Basin are characterized by high thermal evolution, high hydrocarbon generation intensity, good material base, and good roof and floor conditions;the high quality deep-water shelf shale not only has high biogenic silicon content and organic carbon content, but also high porosity coupling. It is concluded that:(1) The shales had good preservation conditions and high retainment of crude oil in the early times, and the shale gas was mainly from cracking of crude oil.(2) The biogenic silicon(opal A) turned into crystal quartz in early times of burial diagenesis, lots of micro-size intergranular pores were produced in the same time;moreover, the biogenic silicon frame had high resistance to compaction, thus it provided the conditions not only for oil charge in the early stage, but also for formation and preservation of nanometer cellular-like pores, and was the key factor enabling the preservation of organic pores.(3) The high quality shale of Wufeng–Longmaxi Formation had high brittleness, strong homogeneity, siliceous intergranular micro-pores and nanometer organic pores, which were conducive to the formation of complicated fissure network connecting the siliceous intergranular nano-pores, and thus high and stable production of shale gas.
文摘The clastic rocks in the depth of 2800-6000 m of the Paleogene in Jiyang sub-basin had undergone the middle diagenesis and late diagenesis.The reservoirs in main areas of the sub-basin developed 2-6 secondary pores zones.The reservoirs in the stage A of middle diagenesis of Bonan fault zone in Zhanhua depression and of the gentle slope belt of Chezhen depression are controlled by the acidic diagenetic medium and developed one secondary pores zone in each diagenetic sub-stage respectively.The contents ofautogenic quartz,pyrite and kaolinite are quite high in these reservoirs.The reservoirs’
文摘The deep buried clastic formation of Paleogene is an important hydrocarbon reservoir in the Chezhen depression.There are two types of diagenetic alteration modes in it.The first mode is weak compaction, strong cementation,fracturing and weak dissolution in the sandstone and conglomerate on the steep slope of the depression.The reservoirs are cemented mainly by carbonate minerals strongly。
