Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditio...Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditional teaching,this paper proposes curriculum teaching reform based on the outcome-based education(OBE)concept,including determining course objectives,reforming teaching modes and methods,and improving the curriculum assessment and evaluation system.After two semesters of practice,this method not only enhances students’learning initiative but also improves teaching quality.展开更多
The pandemic highlighted significant gaps in the public health infrastructure impacted by shortages of public health workers, an undertrained workforce, and years of disinvestment. These gaps required innovative probl...The pandemic highlighted significant gaps in the public health infrastructure impacted by shortages of public health workers, an undertrained workforce, and years of disinvestment. These gaps required innovative problem-solving by public health agencies (PHAs), including local health departments (LHDs), to respond to rapidly changing community conditions during and after the pandemic. Many schools and programs of public health (SPPH) worked with PHAs to mobilize public health (PH) students through practice-based teaching (PBT). Current research indicates PBT benefits all stakeholders—PHAs, students, faculty, SPPH, and ultimately the community served. However, more research is needed on the utility of PBT in addressing a community’s systemic public health issues, the extent to which the academic-community collaboration enhances a PHA’s capacity, and the impact of the pedagogy on preparing the workforce for an evolving PH landscape. This paper examines the process of a semester-long PBT course, guided by the PBT STEPS framework, which includes five steps from collaboration to implementation to evaluation of a PBT course. The collaborating PHA and its student group addressed community trauma and resilience issues during the semester. Additionally, it examines the longer-term impacts after the semester for the PHA, community, and the workforce by 1) conducting a formative evaluation to understand needs and gaps in the community;2) redesigning an intervention that merged the results of the formative evaluation with the intervention developed during the semester;and 3) securing funding and resources for intervention sustainability. Through the documentation of a post-course partnership between an LHD and faculty at a large school of public health, this case study illustrates the potential for PBT to lay the foundation for ongoing research that supports more impactful interventions for PHAs while bolstering the workforce abilities of students as future practitioners.展开更多
Engineering practice is the key bridge between college education and actual work in the industry.In order to deliver qualified talents with engineering quality to the industry,this paper explores integrating software ...Engineering practice is the key bridge between college education and actual work in the industry.In order to deliver qualified talents with engineering quality to the industry,this paper explores integrating software engineering thinking into the Embedded System Design course.A practical and effective teaching mode is designed consisting of immersive learning,case-based learning,progressive practice,interactive learning,and autonomous learning.Through this teaching mode,multi-levels of closed-loop have been established including final project cycle closed-loop,testing cycle closed-loop,and product cycle closed-loop.During this process,students gradually transition to putting forward product requirements,carrying out design and development,thinking and solving problems,collaborating,and assuring quality from the perspective of software engineering.The practice results show that students’engineering quality has been significantly improved.展开更多
The Three Gorges Project (TGP for short) is the key project to train and develop the Yangtze River of China,with multi-objects of flood defence,electricity generation,shipping,etc.However,sediment plays an important r...The Three Gorges Project (TGP for short) is the key project to train and develop the Yangtze River of China,with multi-objects of flood defence,electricity generation,shipping,etc.However,sediment plays an important role in beth constructing of engineering and exerting efficiency of TGP.Special attention,there- fore,has been paid to sediment problem of TGP since the very beginning of this engineering's pregnancy.Up to now,much observed data and fruitful researches about TGP have come into being,and a sci...展开更多
The coating on the electrodes contains many kinds of raw materials which affect significantly on the mechanical properties of deposited metals. It is still a problem how to predict and control the mechanical propertie...The coating on the electrodes contains many kinds of raw materials which affect significantly on the mechanical properties of deposited metals. It is still a problem how to predict and control the mechanical properties of deposited metals directly according to the components of coating on the electrodes. In this paper an electrode intelligent design system is developed by means of fuzzy neural network technology and genetic algorithm,, dynamic link library, object linking and embedding and multithreading. The front-end application and customer interface of the system is realized by using visual C ＋＋ program language and taking SQL Server 2000 as background database. It realizes series functions including automatic design of electrode formula, intelligent prediction of electrode properties, inquiry of electrode information, output of process report based on normalized template and electronic storage and search of relative files.展开更多
[Objective] The research aimed to study design and development of system platform of 'study on relationship between natural phenology and climate change' based on WEB and GIS. [Method] Relied on the technologi...[Objective] The research aimed to study design and development of system platform of 'study on relationship between natural phenology and climate change' based on WEB and GIS. [Method] Relied on the technologies of WEB and GIS, a set of system platform of 'study on relationship between natural phenology and climate change' was developed based on the hybrid architecture of C/S (Client/Server) and B/S (Browser/Server). Moreover, its establishing process and functional module were detailedly introduced. [Result] The natural phenology and climate change in Guangxi were research objects of system platform of 'study on relationship between natural phenology and climate change'. By combining WEB and GIS with database, the primary application of 'study on relationship between natural phenology and climate change' was realized. The system used hybrid architecture of C/S and B/S. The four-layer architectures were independent to improve security, stability and maintainability of system. The visual interface on the foreground was simply, clear and easy to use. The generating program of GIS three-dimensional graph on the background was real-time and high-efficiency, providing powerful guarantee for stable and safe operation of phenology research work process. The system had functions of inquiry, analysis, statistical diagram, GIS three-dimensional graph and data export. Through the analysis of natural phenology observation data, the system could find variation rule of natural phenology as three-dimensional space (longitude, latitude and altitude) and its relationship with climate change. [Conclusion] The research laid good foundation for further deeply carrying out application of 'study on relationship between natural phenology and climate change', and also provided reference basis for recognizing nature and using change rule of phenology to execute production scheduling and strategic decision (seed-introduction and regionalization).展开更多
Based on a systematic analysis about the design principles, systematic objectives, clients’ demands and functional modules of the regional karst desertification disaster information system, a systematic application p...Based on a systematic analysis about the design principles, systematic objectives, clients’ demands and functional modules of the regional karst desertification disaster information system, a systematic application plan was proposed in this paper that the mainstream technologies like COMGIS, etc. can be used for secondary development, and Du’an Yao Autonomous County of Guangxi was taken as an example to illustrate the application of geographical information system in development of karst desertification disaster information system, and to provide a feasible plan for realization of accessory decision information aiming for sustainable development of karst desertification area.展开更多
The choice of methods or design languages is a crucial phase in the development of systems and software, also for real time and embedded systems. An open question that remains in the design of these types of systems i...The choice of methods or design languages is a crucial phase in the development of systems and software, also for real time and embedded systems. An open question that remains in the design of these types of systems is to build a method, or to choose one among those existing, capable to cover the life cycle of a project, and particularly the development phases. This article contributes to answer the question, by proposing an approach based on a multi-criteria comparative study, of few languages and methods dedicated to the design of real time and embedded systems. The underlying objective of this work is to present to designers a wide range of approaches, and elements that can guide their choices. In order to reach this goal, we propose different comparison criteria. Each criterion is divided into sub-criteria, so that the designers can refine their choices according to the qualities they prefer and wish to have in the method or language. We also define a rating scale which is used to assess the retained languages and methods. The scores obtained from this assessment are presented in tables, one table per criterion, followed by a summary table giving the overall scores. Graphics built from these tables are provided and intend to facilitate the judgement and thus the choice of the designers.展开更多
Aim To research the computer optimization design in material formulation. Methods The professional software including experimental design, mathematical modeling and optimization of single and multiple purposes was d...Aim To research the computer optimization design in material formulation. Methods The professional software including experimental design, mathematical modeling and optimization of single and multiple purposes was developed and applied to the formulation design for the flame retardant ethylenepropylene-diene mischpolymer (EPDM) insulation composites. With the aid of equipartition design, the mathematical models were established based on the optimization of the four properties (limiting oxygen index, volume resistance, tensile strength and elongation). Results The models from limited experiments had good significance, and the modeling analysis conclusions were in good agreement with later experiments. The optimization formulation was practically excellent. Conclusion The software enables practically a comprehensive multi-purpose use of material formulation research.展开更多
＂Over＂ phenomenon exists in all fields of society, and over thoughts and behaviors not only waste resources, but also destroy the ecological environment.Landscape design is also facing the dilemma of over planning, ...＂Over＂ phenomenon exists in all fields of society, and over thoughts and behaviors not only waste resources, but also destroy the ecological environment.Landscape design is also facing the dilemma of over planning, over design and over construction. Based on the paraphrase and explanation of ＂degree＂, the principle for modest landscape design with the concept of sustainable development was explored through the analysis on the concept of sustainable development, which emphasized the ＂degree＂ standard in landscape design, and the combination of regional features with native features to carry out ecological design, with the aim to facilitate the landscape designers to design the ＂modest＂ landscape with sustainable development.展开更多
Additive manufacturing technology is highly regarded due to its advantages,such as high precision and the ability to address complex geometric challenges.However,the development of additive manufacturing process is co...Additive manufacturing technology is highly regarded due to its advantages,such as high precision and the ability to address complex geometric challenges.However,the development of additive manufacturing process is constrained by issues like unclear fundamental principles,complex experimental cycles,and high costs.Machine learning,as a novel artificial intelligence technology,has the potential to deeply engage in the development of additive manufacturing process,assisting engineers in learning and developing new techniques.This paper provides a comprehensive overview of the research and applications of machine learning in the field of additive manufacturing,particularly in model design and process development.Firstly,it introduces the background and significance of machine learning-assisted design in additive manufacturing process.It then further delves into the application of machine learning in additive manufacturing,focusing on model design and process guidance.Finally,it concludes by summarizing and forecasting the development trends of machine learning technology in the field of additive manufacturing.展开更多
Sustainable urban development involves many fields with complex data types and rich semantic relationships,such as the economic,societal,and ecological fields.Knowledge graphs provide a new means for sustainable urban...Sustainable urban development involves many fields with complex data types and rich semantic relationships,such as the economic,societal,and ecological fields.Knowledge graphs provide a new means for sustainable urban development research by leveraging their strengths in the construction of knowledge networks and display of knowledge associations.Focusing on Chenzhou,a resource-based city serving as a China’s Innovation Demonstration Zone for Sustainable Development Agenda,this study adopted a top-down approach,applying the“seven-step”and“skeleton”methods to construct an ontology for sustainable urban development through manual editing.A knowledge graph was constructed for Chenzhou’s sustainable development,comprising 515 nodes,3209 relations,and 28157 attributes.Sustainable measures and pathways were proposed based on this knowledge graph.The results showed that Chenzhou’s future sustainable development should focus on innovation,growth,emissions reduction,centering around high-quality and sustainable development.Promoting the transfer and transformation of scientific and technological achievements,accelerating the optimization and upgrading of industrial structures,and enhancing talent cultivation and recruitment will foster new quality productive forces,providing strong momentum and support for the high-quality and sustainable development of Chenzhou.To accelerate the green economy transition,Chenzhou should improve the market-oriented allocation system for resources and environmental factors,explore the“gross ecosystem product+eco environment-oriented development”project implementation model,encourage enterprises to adopt environmental,social,and governance principles,and foster synergies between supply and demand.Furthermore,coordinating Chenzhou’s low-carbon city pilot projects and constructing carbon sequestration pathways that leverage nature-based solutions will help implement the“dual carbon”actions and enhance the city’s ability to respond to climate change.展开更多
The paper establishes a multidisciplinary design and optimization framework that aims at minimizing Unmanned aerial vehicles (UAV) development costs. This framework integrates development costs as an equally important...The paper establishes a multidisciplinary design and optimization framework that aims at minimizing Unmanned aerial vehicles (UAV) development costs. This framework integrates development costs as an equally important factor alongside weight and aerodynamic disciplines within the UAV design process. The OpenMDAO paradigm is employed to facilitate a standalone design and optimization application. A comprehensive multidisciplinary analysis module is developed, encompassing initial geometrical sizing, weight analysis, aerodynamic performance evaluation, and estimation models for development costs. The effectiveness of the framework is validated through a low-cost, high-performance UAV case study. The results demonstrate that neglecting the influence of UAV development costs would be imprudent. By appropriately adjusting design parameters using the optimization algorithm, significant reductions in UAV development costs can be achieved with minimal performance losses.展开更多
Based on the characteristics of large flow rate , low head , short annual operation time , and high reliability of the city flood-control pumping stations , a new-type shaft tubular pumping system featuring a shaft su...Based on the characteristics of large flow rate , low head , short annual operation time , and high reliability of the city flood-control pumping stations , a new-type shaft tubular pumping system featuring a shaft suction box and a siphon-type discharge passage with a vacuum breaker as the cutoff device was developed , which possesses such advantages as simple structure , reliable cutoff , and high energy performance.Taking some pumping stations as the case studies , in the light of the specified operation conditions , the hydraulic optimal design of the shaft-type tubular pumping system was determined and the optimized shape of the system was recommended.The performance prediction based on the computational fluid dynamics methodology was determined and the model test verification was conducted.The results show that the predicted data agree with the experimental head and efficiency so that both methods can be used to determine the performance of a real pumping station.Finally , the in-situ measurements of a pumping station during the commissioning period further verified that the shaft-type tubular pumping station with a siphon discharge passage is of higher efficiency , more reliable and stable.展开更多
he design verification steps that take place in today’s automotive industry, which constitute the values of each successive or simultaneous phase in the new product development process, create a complex structure wit...he design verification steps that take place in today’s automotive industry, which constitute the values of each successive or simultaneous phase in the new product development process, create a complex structure with the inclusion of each new technology and discipline. Therefore, step by step, each design verification phase definition in the flow contains important phase transition measurements or approval tolerances that ensure the simplicity and continuity of vehicle development processes. In addition, classification of design verification stages within the framework of this study or evaluation in two classes (static and dynamic) is a new approach, but it is a synthesis with the analysis of the new product development process. The vehicle’s basic structure, which constitutes the ergonomic and functional requirements of the vehicle in a static environment, takes into account the dynamic environment variables with crash or accident tests. Increasing new technology adaptations in the automotive industry have changed the new product development process that performs this function structurally and created the concept of design verification under consecutive or simultaneous process simplicity. From the autonomous driving to the use of alternative energy, possible accident scenarios and design verification phase transitions in the integration of parts and systems of the newly developed vehicle create a new structure that models and directs the lean product development process especially in the automotive industry in the coming days. In the lean product development process that takes place in the automotive industry, the design verification transition steps or the approval-control analysis of the development stages, which form a new and effective approach, are re-modeling the entire flow. Therefore, successful execution of design verification steps used in the control of new interdisciplinary product development phase transitions provides value creation.?Within the scope of this study, the effectiveness of the static and dynamic design verification steps, which are carried out in 5 global automotive companies included in the research, which constitute the stage transitions of the new product development process, has been measured. Apart from the design verification transition stages, the process variables that differ among the automotive companies involved in the research are excluded from the scope of this study. In other words, in field researches in the automotive industry, new vehicle design steps or basic engineering steps in the new product development process steps, while creating independent fixed variables, interdisciplinary collaborations, static and dynamic design verification transition stages they perform, or their sequence in the basic flow, is accepted as a dependent variable. Therefore, in the study, the positive effect of the automotive companies that included the static and dynamic design verification phase transition approvals in the lean product development process was investigated. Under the comparative analysis structure of the research, the effect of automotive companies, which accept international vehicle specifications as static design verification input, on market performance has been examined in depth. The detailed depth in the comparison analysis conducted under the second field studies of the study is due to the prediction of dynamic design verification stages to provide a high impact on the market performance, according to the static verification analysis. The new product development stages of the dependent variables were fixed and the flow-oriented?“effect”?of the independent variables in the basic process influenced by the design verification activities was analyzed under the new automotive industry company comparisons. In addition, the impact of the automotive design activities that make up the comparison analysis of the research on the scope of the lean product development stage and its effect on the basic process flow has been demonstrated competition-oriented. Therefore, sub-variables, options, criteria, results, which form a defined comparison problem, create basic test values that affect the problem.展开更多
At the background that existing colleges largely construct campuses,the paper has illustrated the importance,significance and function of college campus environmental landscape design,and factors affecting it.It consi...At the background that existing colleges largely construct campuses,the paper has illustrated the importance,significance and function of college campus environmental landscape design,and factors affecting it.It considers that college campuses tend to be developed into green ecological campus,regional humanistic campus,and knowledge research campus.Finally,by taking the East Lake Campus of Zhejiang A & F University for example,the campus division planning and scientific achievements' application planning have been illustrated.展开更多
With the acceleration of urbanization, city complex as an intensive urban organization form has gradually grown up in China. By consulting relevant documents of city complex, emergence background and related concepts ...With the acceleration of urbanization, city complex as an intensive urban organization form has gradually grown up in China. By consulting relevant documents of city complex, emergence background and related concepts of city complex were introduced, landscape design of Chenglong-International was analyzed to propose landscape design principles and concepts of city complex under the compound development model, landscape processing techniques of outdoor functional subareas and transitional areas were introduced to provide useful reference for the landscape design of city complex.展开更多
In order to improve the fire resistance,water resistance and wear resistance of ordinary plywood products in the wood processing industry,three composite structures of plywood products S1,S2 and S3 were designed in th...In order to improve the fire resistance,water resistance and wear resistance of ordinary plywood products in the wood processing industry,three composite structures of plywood products S1,S2 and S3 were designed in this paper,and a reasonable production process was proposed.Through the physical and mechanical properties and fire resistance testing and technical and economic analysis,the applicability of composite plywood was evaluated.The results of the study showed that the physical mechanics of the three kinds of composite structure plywood met the standard requirements,and their fire resistance was far better than that of ordinary plywood.Among them,the S1 structural board had the best overall physical and mechanical properties.The S3 structural board showed the best fire resistance,which was about 1.9 times more than that of ordinary plywood,and the added cost was the lowest.The thin cork board added to the S2 structural board had poor fire performance since the air in the cork board cavities had a certain combustion-supporting effect,which inhibited the fire resistance of high-pressure laminate(HPL)layer.Moreover,the additional cost of the S2 board was the highest,and its comprehensive performance was the worst.The S3 structural plywood product composed of HPL fireproof board with a thickness of about 1 mm in the surface layer and ordinary plywood with a thickness of about 12 mm in the core layer was the most cost-effective product,which could meet the needs of various fields such as construction,home furnishing,decoration and transportation.展开更多
The matters of equipment optimization development are usually discrete,fuzzy and non-quantitative.It is difficult directly to optimize the equipment development with a mathematical model.A set of methods for designing...The matters of equipment optimization development are usually discrete,fuzzy and non-quantitative.It is difficult directly to optimize the equipment development with a mathematical model.A set of methods for designing the equipment optimization development with six dimensions and eight main elements is established based on the theory and method of standardization.The top-tier design space of systematic development of equipment is built up by the relations of basic models,series and model spectrums.The relations of time and space for equipment optimization development are established.The design processes of a six dimension systematic space are expounded.The connotation of each plan in the main system space is analyzed.A design method for an entire equipment is established with standardization theory.The coordinating design methods of equipment technical system and the optimization design methods of equipment integration are discussed.The design methods for universalization and serialization of components and parts are established.The design methods of equipment optimization development highlight the relations of the basic model of platform,the serialization of platform basic models,the modularization of equipment functions,the model spectrum of variant equipment,and the universalization and serialization of components and parts.展开更多
Cost and safety are important considerations when designing the thickness of a protective reinforced concrete shelter.The blast perforation limit(BPL)is the minimum concrete shelter thickness that resists perforation ...Cost and safety are important considerations when designing the thickness of a protective reinforced concrete shelter.The blast perforation limit(BPL)is the minimum concrete shelter thickness that resists perforation under blast loading.To investigate the influence of the depth of embedment(DOE)and length-to-diameter ratio(L/D)of an explosive charge on the BPL,the results of an explosion test using a slender explosive partially embedded in a reinforced concrete slab were used to validate a refined finite element model.This model was then applied to conduct more than 300 simulations with strictly controlled variables,obtaining the BPLs for various concrete slabs subjected to charge DOEs ranging from0 to∞and L/D values ranging from 0.89 to 6.87.The numerical results were compared with the experimental results from published literature,further verifying the reliability of the simulation.The findings indicate that for the same explosive charge mass and L/D,the greater the DOE,the larger the critical residual thickness(Rc,defined as the difference between the BPL and DOE)up to a certain constant value;for the same explosive charge mass and DOE,the greater the L/D,the smaller the Rc.Thus,corresponding DOE and shape coefficients were introduced to derive a new equation for the BPL,providing a theoretical approach to the design and safety assessment of protective structures.展开更多
基金This paper is one of the phased achievements of the Education and Teaching Reform Project of Guangdong University of Petrochemical Engineering in 2022(71013413080)the Research and Practice Project of Teaching and Teaching Reform of University-Level Higher Vocational Education in 2023(JY202353).
文摘Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditional teaching,this paper proposes curriculum teaching reform based on the outcome-based education(OBE)concept,including determining course objectives,reforming teaching modes and methods,and improving the curriculum assessment and evaluation system.After two semesters of practice,this method not only enhances students’learning initiative but also improves teaching quality.
文摘The pandemic highlighted significant gaps in the public health infrastructure impacted by shortages of public health workers, an undertrained workforce, and years of disinvestment. These gaps required innovative problem-solving by public health agencies (PHAs), including local health departments (LHDs), to respond to rapidly changing community conditions during and after the pandemic. Many schools and programs of public health (SPPH) worked with PHAs to mobilize public health (PH) students through practice-based teaching (PBT). Current research indicates PBT benefits all stakeholders—PHAs, students, faculty, SPPH, and ultimately the community served. However, more research is needed on the utility of PBT in addressing a community’s systemic public health issues, the extent to which the academic-community collaboration enhances a PHA’s capacity, and the impact of the pedagogy on preparing the workforce for an evolving PH landscape. This paper examines the process of a semester-long PBT course, guided by the PBT STEPS framework, which includes five steps from collaboration to implementation to evaluation of a PBT course. The collaborating PHA and its student group addressed community trauma and resilience issues during the semester. Additionally, it examines the longer-term impacts after the semester for the PHA, community, and the workforce by 1) conducting a formative evaluation to understand needs and gaps in the community;2) redesigning an intervention that merged the results of the formative evaluation with the intervention developed during the semester;and 3) securing funding and resources for intervention sustainability. Through the documentation of a post-course partnership between an LHD and faculty at a large school of public health, this case study illustrates the potential for PBT to lay the foundation for ongoing research that supports more impactful interventions for PHAs while bolstering the workforce abilities of students as future practitioners.
文摘Engineering practice is the key bridge between college education and actual work in the industry.In order to deliver qualified talents with engineering quality to the industry,this paper explores integrating software engineering thinking into the Embedded System Design course.A practical and effective teaching mode is designed consisting of immersive learning,case-based learning,progressive practice,interactive learning,and autonomous learning.Through this teaching mode,multi-levels of closed-loop have been established including final project cycle closed-loop,testing cycle closed-loop,and product cycle closed-loop.During this process,students gradually transition to putting forward product requirements,carrying out design and development,thinking and solving problems,collaborating,and assuring quality from the perspective of software engineering.The practice results show that students’engineering quality has been significantly improved.
文摘The Three Gorges Project (TGP for short) is the key project to train and develop the Yangtze River of China,with multi-objects of flood defence,electricity generation,shipping,etc.However,sediment plays an important role in beth constructing of engineering and exerting efficiency of TGP.Special attention,there- fore,has been paid to sediment problem of TGP since the very beginning of this engineering's pregnancy.Up to now,much observed data and fruitful researches about TGP have come into being,and a sci...
文摘The coating on the electrodes contains many kinds of raw materials which affect significantly on the mechanical properties of deposited metals. It is still a problem how to predict and control the mechanical properties of deposited metals directly according to the components of coating on the electrodes. In this paper an electrode intelligent design system is developed by means of fuzzy neural network technology and genetic algorithm,, dynamic link library, object linking and embedding and multithreading. The front-end application and customer interface of the system is realized by using visual C ＋＋ program language and taking SQL Server 2000 as background database. It realizes series functions including automatic design of electrode formula, intelligent prediction of electrode properties, inquiry of electrode information, output of process report based on normalized template and electronic storage and search of relative files.
基金Supported by Guangxi Natural Science Fund Item in China ( Guikezi 0991023Z)
文摘[Objective] The research aimed to study design and development of system platform of 'study on relationship between natural phenology and climate change' based on WEB and GIS. [Method] Relied on the technologies of WEB and GIS, a set of system platform of 'study on relationship between natural phenology and climate change' was developed based on the hybrid architecture of C/S (Client/Server) and B/S (Browser/Server). Moreover, its establishing process and functional module were detailedly introduced. [Result] The natural phenology and climate change in Guangxi were research objects of system platform of 'study on relationship between natural phenology and climate change'. By combining WEB and GIS with database, the primary application of 'study on relationship between natural phenology and climate change' was realized. The system used hybrid architecture of C/S and B/S. The four-layer architectures were independent to improve security, stability and maintainability of system. The visual interface on the foreground was simply, clear and easy to use. The generating program of GIS three-dimensional graph on the background was real-time and high-efficiency, providing powerful guarantee for stable and safe operation of phenology research work process. The system had functions of inquiry, analysis, statistical diagram, GIS three-dimensional graph and data export. Through the analysis of natural phenology observation data, the system could find variation rule of natural phenology as three-dimensional space (longitude, latitude and altitude) and its relationship with climate change. [Conclusion] The research laid good foundation for further deeply carrying out application of 'study on relationship between natural phenology and climate change', and also provided reference basis for recognizing nature and using change rule of phenology to execute production scheduling and strategic decision (seed-introduction and regionalization).
基金China National Natural Science Foundation(Grant No.40361002)Guangxi Natural Science Foundation(Grant No.Gui Ke Zi 0342001-2)Guangxi Education Bureau Foundation(Grant No.Gui Jiao Ke Yan[2003.]22-3).
文摘Based on a systematic analysis about the design principles, systematic objectives, clients’ demands and functional modules of the regional karst desertification disaster information system, a systematic application plan was proposed in this paper that the mainstream technologies like COMGIS, etc. can be used for secondary development, and Du’an Yao Autonomous County of Guangxi was taken as an example to illustrate the application of geographical information system in development of karst desertification disaster information system, and to provide a feasible plan for realization of accessory decision information aiming for sustainable development of karst desertification area.
文摘The choice of methods or design languages is a crucial phase in the development of systems and software, also for real time and embedded systems. An open question that remains in the design of these types of systems is to build a method, or to choose one among those existing, capable to cover the life cycle of a project, and particularly the development phases. This article contributes to answer the question, by proposing an approach based on a multi-criteria comparative study, of few languages and methods dedicated to the design of real time and embedded systems. The underlying objective of this work is to present to designers a wide range of approaches, and elements that can guide their choices. In order to reach this goal, we propose different comparison criteria. Each criterion is divided into sub-criteria, so that the designers can refine their choices according to the qualities they prefer and wish to have in the method or language. We also define a rating scale which is used to assess the retained languages and methods. The scores obtained from this assessment are presented in tables, one table per criterion, followed by a summary table giving the overall scores. Graphics built from these tables are provided and intend to facilitate the judgement and thus the choice of the designers.
文摘Aim To research the computer optimization design in material formulation. Methods The professional software including experimental design, mathematical modeling and optimization of single and multiple purposes was developed and applied to the formulation design for the flame retardant ethylenepropylene-diene mischpolymer (EPDM) insulation composites. With the aid of equipartition design, the mathematical models were established based on the optimization of the four properties (limiting oxygen index, volume resistance, tensile strength and elongation). Results The models from limited experiments had good significance, and the modeling analysis conclusions were in good agreement with later experiments. The optimization formulation was practically excellent. Conclusion The software enables practically a comprehensive multi-purpose use of material formulation research.
文摘＂Over＂ phenomenon exists in all fields of society, and over thoughts and behaviors not only waste resources, but also destroy the ecological environment.Landscape design is also facing the dilemma of over planning, over design and over construction. Based on the paraphrase and explanation of ＂degree＂, the principle for modest landscape design with the concept of sustainable development was explored through the analysis on the concept of sustainable development, which emphasized the ＂degree＂ standard in landscape design, and the combination of regional features with native features to carry out ecological design, with the aim to facilitate the landscape designers to design the ＂modest＂ landscape with sustainable development.
基金financially supported by the Technology Development Fund of China Academy of Machinery Science and Technology(No.170221ZY01)。
文摘Additive manufacturing technology is highly regarded due to its advantages,such as high precision and the ability to address complex geometric challenges.However,the development of additive manufacturing process is constrained by issues like unclear fundamental principles,complex experimental cycles,and high costs.Machine learning,as a novel artificial intelligence technology,has the potential to deeply engage in the development of additive manufacturing process,assisting engineers in learning and developing new techniques.This paper provides a comprehensive overview of the research and applications of machine learning in the field of additive manufacturing,particularly in model design and process development.Firstly,it introduces the background and significance of machine learning-assisted design in additive manufacturing process.It then further delves into the application of machine learning in additive manufacturing,focusing on model design and process guidance.Finally,it concludes by summarizing and forecasting the development trends of machine learning technology in the field of additive manufacturing.
基金supported by the National Key Research and Development Program of China under the theme“Research on urban sustainable development diagnosis and pathways for the improvement” [Grant No.2022YFC3802902].
文摘Sustainable urban development involves many fields with complex data types and rich semantic relationships,such as the economic,societal,and ecological fields.Knowledge graphs provide a new means for sustainable urban development research by leveraging their strengths in the construction of knowledge networks and display of knowledge associations.Focusing on Chenzhou,a resource-based city serving as a China’s Innovation Demonstration Zone for Sustainable Development Agenda,this study adopted a top-down approach,applying the“seven-step”and“skeleton”methods to construct an ontology for sustainable urban development through manual editing.A knowledge graph was constructed for Chenzhou’s sustainable development,comprising 515 nodes,3209 relations,and 28157 attributes.Sustainable measures and pathways were proposed based on this knowledge graph.The results showed that Chenzhou’s future sustainable development should focus on innovation,growth,emissions reduction,centering around high-quality and sustainable development.Promoting the transfer and transformation of scientific and technological achievements,accelerating the optimization and upgrading of industrial structures,and enhancing talent cultivation and recruitment will foster new quality productive forces,providing strong momentum and support for the high-quality and sustainable development of Chenzhou.To accelerate the green economy transition,Chenzhou should improve the market-oriented allocation system for resources and environmental factors,explore the“gross ecosystem product+eco environment-oriented development”project implementation model,encourage enterprises to adopt environmental,social,and governance principles,and foster synergies between supply and demand.Furthermore,coordinating Chenzhou’s low-carbon city pilot projects and constructing carbon sequestration pathways that leverage nature-based solutions will help implement the“dual carbon”actions and enhance the city’s ability to respond to climate change.
文摘The paper establishes a multidisciplinary design and optimization framework that aims at minimizing Unmanned aerial vehicles (UAV) development costs. This framework integrates development costs as an equally important factor alongside weight and aerodynamic disciplines within the UAV design process. The OpenMDAO paradigm is employed to facilitate a standalone design and optimization application. A comprehensive multidisciplinary analysis module is developed, encompassing initial geometrical sizing, weight analysis, aerodynamic performance evaluation, and estimation models for development costs. The effectiveness of the framework is validated through a low-cost, high-performance UAV case study. The results demonstrate that neglecting the influence of UAV development costs would be imprudent. By appropriately adjusting design parameters using the optimization algorithm, significant reductions in UAV development costs can be achieved with minimal performance losses.
基金support by the 11th Five Year Key Project of China’s National Scientific Supporting Plan(Grant No.2006BAB04A03)the Hydraulic Engineering Project from the Water Resources Department of Jiangsu Province(Grant No.2010023)
文摘Based on the characteristics of large flow rate , low head , short annual operation time , and high reliability of the city flood-control pumping stations , a new-type shaft tubular pumping system featuring a shaft suction box and a siphon-type discharge passage with a vacuum breaker as the cutoff device was developed , which possesses such advantages as simple structure , reliable cutoff , and high energy performance.Taking some pumping stations as the case studies , in the light of the specified operation conditions , the hydraulic optimal design of the shaft-type tubular pumping system was determined and the optimized shape of the system was recommended.The performance prediction based on the computational fluid dynamics methodology was determined and the model test verification was conducted.The results show that the predicted data agree with the experimental head and efficiency so that both methods can be used to determine the performance of a real pumping station.Finally , the in-situ measurements of a pumping station during the commissioning period further verified that the shaft-type tubular pumping station with a siphon discharge passage is of higher efficiency , more reliable and stable.
文摘he design verification steps that take place in today’s automotive industry, which constitute the values of each successive or simultaneous phase in the new product development process, create a complex structure with the inclusion of each new technology and discipline. Therefore, step by step, each design verification phase definition in the flow contains important phase transition measurements or approval tolerances that ensure the simplicity and continuity of vehicle development processes. In addition, classification of design verification stages within the framework of this study or evaluation in two classes (static and dynamic) is a new approach, but it is a synthesis with the analysis of the new product development process. The vehicle’s basic structure, which constitutes the ergonomic and functional requirements of the vehicle in a static environment, takes into account the dynamic environment variables with crash or accident tests. Increasing new technology adaptations in the automotive industry have changed the new product development process that performs this function structurally and created the concept of design verification under consecutive or simultaneous process simplicity. From the autonomous driving to the use of alternative energy, possible accident scenarios and design verification phase transitions in the integration of parts and systems of the newly developed vehicle create a new structure that models and directs the lean product development process especially in the automotive industry in the coming days. In the lean product development process that takes place in the automotive industry, the design verification transition steps or the approval-control analysis of the development stages, which form a new and effective approach, are re-modeling the entire flow. Therefore, successful execution of design verification steps used in the control of new interdisciplinary product development phase transitions provides value creation.?Within the scope of this study, the effectiveness of the static and dynamic design verification steps, which are carried out in 5 global automotive companies included in the research, which constitute the stage transitions of the new product development process, has been measured. Apart from the design verification transition stages, the process variables that differ among the automotive companies involved in the research are excluded from the scope of this study. In other words, in field researches in the automotive industry, new vehicle design steps or basic engineering steps in the new product development process steps, while creating independent fixed variables, interdisciplinary collaborations, static and dynamic design verification transition stages they perform, or their sequence in the basic flow, is accepted as a dependent variable. Therefore, in the study, the positive effect of the automotive companies that included the static and dynamic design verification phase transition approvals in the lean product development process was investigated. Under the comparative analysis structure of the research, the effect of automotive companies, which accept international vehicle specifications as static design verification input, on market performance has been examined in depth. The detailed depth in the comparison analysis conducted under the second field studies of the study is due to the prediction of dynamic design verification stages to provide a high impact on the market performance, according to the static verification analysis. The new product development stages of the dependent variables were fixed and the flow-oriented?“effect”?of the independent variables in the basic process influenced by the design verification activities was analyzed under the new automotive industry company comparisons. In addition, the impact of the automotive design activities that make up the comparison analysis of the research on the scope of the lean product development stage and its effect on the basic process flow has been demonstrated competition-oriented. Therefore, sub-variables, options, criteria, results, which form a defined comparison problem, create basic test values that affect the problem.
文摘At the background that existing colleges largely construct campuses,the paper has illustrated the importance,significance and function of college campus environmental landscape design,and factors affecting it.It considers that college campuses tend to be developed into green ecological campus,regional humanistic campus,and knowledge research campus.Finally,by taking the East Lake Campus of Zhejiang A & F University for example,the campus division planning and scientific achievements' application planning have been illustrated.
文摘With the acceleration of urbanization, city complex as an intensive urban organization form has gradually grown up in China. By consulting relevant documents of city complex, emergence background and related concepts of city complex were introduced, landscape design of Chenglong-International was analyzed to propose landscape design principles and concepts of city complex under the compound development model, landscape processing techniques of outdoor functional subareas and transitional areas were introduced to provide useful reference for the landscape design of city complex.
基金This work was supported by the 2020 Jiangsu Provincial Department of Science and Technology Policy Guidance Category(North Jiangsu Science and Technology Special SZ-L YG202014).
文摘In order to improve the fire resistance,water resistance and wear resistance of ordinary plywood products in the wood processing industry,three composite structures of plywood products S1,S2 and S3 were designed in this paper,and a reasonable production process was proposed.Through the physical and mechanical properties and fire resistance testing and technical and economic analysis,the applicability of composite plywood was evaluated.The results of the study showed that the physical mechanics of the three kinds of composite structure plywood met the standard requirements,and their fire resistance was far better than that of ordinary plywood.Among them,the S1 structural board had the best overall physical and mechanical properties.The S3 structural board showed the best fire resistance,which was about 1.9 times more than that of ordinary plywood,and the added cost was the lowest.The thin cork board added to the S2 structural board had poor fire performance since the air in the cork board cavities had a certain combustion-supporting effect,which inhibited the fire resistance of high-pressure laminate(HPL)layer.Moreover,the additional cost of the S2 board was the highest,and its comprehensive performance was the worst.The S3 structural plywood product composed of HPL fireproof board with a thickness of about 1 mm in the surface layer and ordinary plywood with a thickness of about 12 mm in the core layer was the most cost-effective product,which could meet the needs of various fields such as construction,home furnishing,decoration and transportation.
文摘The matters of equipment optimization development are usually discrete,fuzzy and non-quantitative.It is difficult directly to optimize the equipment development with a mathematical model.A set of methods for designing the equipment optimization development with six dimensions and eight main elements is established based on the theory and method of standardization.The top-tier design space of systematic development of equipment is built up by the relations of basic models,series and model spectrums.The relations of time and space for equipment optimization development are established.The design processes of a six dimension systematic space are expounded.The connotation of each plan in the main system space is analyzed.A design method for an entire equipment is established with standardization theory.The coordinating design methods of equipment technical system and the optimization design methods of equipment integration are discussed.The design methods for universalization and serialization of components and parts are established.The design methods of equipment optimization development highlight the relations of the basic model of platform,the serialization of platform basic models,the modularization of equipment functions,the model spectrum of variant equipment,and the universalization and serialization of components and parts.
基金supported by the National Natural Science Foundation of China(Grant No.51978166)。
文摘Cost and safety are important considerations when designing the thickness of a protective reinforced concrete shelter.The blast perforation limit(BPL)is the minimum concrete shelter thickness that resists perforation under blast loading.To investigate the influence of the depth of embedment(DOE)and length-to-diameter ratio(L/D)of an explosive charge on the BPL,the results of an explosion test using a slender explosive partially embedded in a reinforced concrete slab were used to validate a refined finite element model.This model was then applied to conduct more than 300 simulations with strictly controlled variables,obtaining the BPLs for various concrete slabs subjected to charge DOEs ranging from0 to∞and L/D values ranging from 0.89 to 6.87.The numerical results were compared with the experimental results from published literature,further verifying the reliability of the simulation.The findings indicate that for the same explosive charge mass and L/D,the greater the DOE,the larger the critical residual thickness(Rc,defined as the difference between the BPL and DOE)up to a certain constant value;for the same explosive charge mass and DOE,the greater the L/D,the smaller the Rc.Thus,corresponding DOE and shape coefficients were introduced to derive a new equation for the BPL,providing a theoretical approach to the design and safety assessment of protective structures.
