In early 2018,the Boliden Garpenberg operation implemented an optimized control strategy as an addition to the existing ventilation on demand system.The purpose of the strategy is to further minimize energy use for ma...In early 2018,the Boliden Garpenberg operation implemented an optimized control strategy as an addition to the existing ventilation on demand system.The purpose of the strategy is to further minimize energy use for main and booster fans,whilst also fulfilling airflow setpoints without violating constraints such as min/max differential pressure over fans and interaction of air between areas in mines.Using air flow measurements and a dynamical model of the ventilation system,a mine-wide coordination control of fans can be carried out.The numerical model is data driven and derived from historical operational data or step changes experiments.This makes both initial deployment and lifetime model maintenance,as the mine evolves,a comparably easy operation.The control has been proven to operate in a stable manner over long periods without having to re-calibrate the model.Results prove a 40%decrease in energy use for the fans involved and a greater controllability of air flow.Moreover,a 15%decrease of the total air flow into the mine will give additional proportional heating savings during winter periods.All in all,the multivariable controller shows a correlation between production in the mine and the ventilation system performance superior to all of its predecessors.展开更多
In this paper,a novel control structure called feedback scheduling of model-based networked control systems is proposed to cope with a flexible network load and resource constraints.The state update time is adjusted a...In this paper,a novel control structure called feedback scheduling of model-based networked control systems is proposed to cope with a flexible network load and resource constraints.The state update time is adjusted according to the real-time network congestion situation.State observer is used under the situation where the state of the controlled plant could not be acquired.The stability criterion of the proposed structure is proved with time-varying state update time.On the basis of the stability of the novel system structure,the compromise between the control performance and the network utilization is realized by using feedback scheduler. Examples are provided to show the advantage of the proposed control structure.展开更多
Monitoring temporal changes in sea level is important in assessing coastal risk.Sea level anomalies at a tide gauge station,if kinematically conceived,include systematic variations such as trend,acceleration,periodic ...Monitoring temporal changes in sea level is important in assessing coastal risk.Sea level anomalies at a tide gauge station,if kinematically conceived,include systematic variations such as trend,acceleration,periodic oscillations,and random disturbances.Among them,the non-stationary nature of the random sea level variations of known or unknown origin at coastal regions has been long recognized by the sea level community.This study proposes the analyses of subgroups of random residual statistics of a rigorously formulated kinematic model solution of tide gauge variations using X-bar and S control charts.The approach is demonstrated using Key West,Florida tide gauge records.The mean and standard errors of 5-year-long subgroups of the residuals revealed that sea level changes at this location have been progressively intensifying from 1913 to the present.Increasing oscillations in sea level at this locality may be attributed partly to the thermal expansion of seawater with increasing temperatures causing larger buoyancy-related sea level fluctuations as well as the intensification of atmospheric events including wind patterns and the impact of changes in inverted barometer effects that will alter coastal risk assessments for the future.展开更多
[Objectives]To establish a quality control chart of DHA in milk powder and determine whether the detection process and results are in control state.[Methods]The content of DHA in milk powder control samples was determ...[Objectives]To establish a quality control chart of DHA in milk powder and determine whether the detection process and results are in control state.[Methods]The content of DHA in milk powder control samples was determined by gas chromatography,and the quality control chart of DHA was established to analyze the controlled state.[Results]the median of the quality control chart was 23.85 mg/100 g,and the standard deviation was 1.00 mg/100 g.In the evaluation and analysis of the new quality control points,it can be seen that the point beyond the warning limit was 1,and the outlier value was not beyond the action line,and the mean value did not change,indicating that the detection is in the statistical control state,and the detection process,method and results are controlled.[Conclusions]The establishment and review of the control chart in this study are expected to provide a reference for other subsequent quality controls.展开更多
In this paper, the control of a two-time-scale plant, where the sensor is connected to a linear controller/ actuator via a network is addressed. The slow and fast systems of singularly perturbed systems are used to pr...In this paper, the control of a two-time-scale plant, where the sensor is connected to a linear controller/ actuator via a network is addressed. The slow and fast systems of singularly perturbed systems are used to produce an estimate of the plant state behavior between transmission times, by which one can reduce the usage of the network. The approximate solutions of the whole systems are derived and it is shown that the whole systems via the network control are generally asymptotically stable as long as their slow and fast systems are both stable. These results are also extended to the case of network delay.展开更多
This paper discusses the model-based predictive controller design of networked nonlinear systems with communica- tion delay and data loss. Based on the analysis of the closed-loop networked predictive control systems,...This paper discusses the model-based predictive controller design of networked nonlinear systems with communica- tion delay and data loss. Based on the analysis of the closed-loop networked predictive control systems, the model-based networked predictive control strategy can compensate for communication delay and data loss in an active way. The designed model-based predictive controller can also guarantee the stability of the closed-loop networked system. The simulation re- suits demonstrate the feasibility and efficacy of the proposed model-based predictive controller design scheme.展开更多
In the manufacturing processes of high value-added products in the pharmaceutical, fine chemical polymer and food industry, insufficient control might produce off-grade products. This can cause significant financial l...In the manufacturing processes of high value-added products in the pharmaceutical, fine chemical polymer and food industry, insufficient control might produce off-grade products. This can cause significant financial losses, or in the pharmaceutical industry, it can result in an unusable batch. In these industries, batch reactors are commonly used, the control of which is essentially a problem of temperature control. In the industry, an increasing number of heating-cooling systems utilising three different temperature levels can be found, which are advantageous from an economic point of view. However, it makes the control more complicated. This paper presents a split-range designing technique using the model of the controlled system with the aim to design a split-range algorithm more specific to the actual sys- tem. The algorithm described provides high control performance when using it with classical PID-based cascade temperature control of jacketed batch reactors;however, it can be used with or as part of other types of controllers, for ex- ample, model-based temperature controllers. The algorithm can be used in the case of systems where only two as well as where three temperature levels are used for temperature control. Besides the switching between the modes of opera- tion and calculating the value of the manipulated variable, one of the most important functions of the split-range algo- rithm is to keep the sign of the gain of the controlled system unchanged. However, with a more system-specific split-range solution, not only can the sign of the gain be kept unchanged, but the gain can also be constant or less de- pendent on the state of the system. Using this solution, the design of the PID controller becomes simpler and can be implemented in existing systems without serious changes.展开更多
Legged robots have always been a focal point of research for scholars domestically and internationally.Compared to other types of robots,quadruped robots exhibit superior balance and stability,enabling them to adapt e...Legged robots have always been a focal point of research for scholars domestically and internationally.Compared to other types of robots,quadruped robots exhibit superior balance and stability,enabling them to adapt effectively to diverse environments and traverse rugged terrains.This makes them well-suited for applications such as search and rescue,exploration,and transportation,with strong environmental adaptability,high flexibility,and broad application prospects.This paper discusses the current state of research on quadruped robots in terms of development status,gait trajectory planning methods,motion control strategies,reinforcement learning applications,and control algorithm integration.It highlights advancements in modeling,optimization,control,and data-driven approaches.The study identifies the adoption of efficient gait planning algorithms,the integration of reinforcement learning-based control technologies,and data-driven methods as key directions for the development of quadruped robots.The aim is to provide theoretical references for researchers in the field of quadruped robotics.展开更多
针对生鲜乳中兽药残留水平动态变化的特点,本研究探索构建一种基于历史数据的生鲜乳中兽药残留动态预警方法。基于Shewhart Control Chart理论,建立了兽药残留超标预警、检出率异常预警和平均值标准偏差预警方法。对中国某大型乳企的生...针对生鲜乳中兽药残留水平动态变化的特点,本研究探索构建一种基于历史数据的生鲜乳中兽药残留动态预警方法。基于Shewhart Control Chart理论,建立了兽药残留超标预警、检出率异常预警和平均值标准偏差预警方法。对中国某大型乳企的生鲜乳中氟甲喹和达氟沙星检测数据分析发现,无需触发风险预警,同时对假定出现的检出率异常和平均值异常预警情况进行了分析。展开更多
The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process i...The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns;natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.展开更多
To monitor the quality characteristics of a process, appropriate graphical and statistical tools must be used. These tools are capable of showing the evolution over time of the behavior of the quality characteristics ...To monitor the quality characteristics of a process, appropriate graphical and statistical tools must be used. These tools are capable of showing the evolution over time of the behavior of the quality characteristics (measurable or countable) and detecting situations that seem to present certain anomalies. The control chart is one of these tools widely used in quality management. In the process of managing the COVID-19 pandemic, this tool will make it possible to know at all times whether the parameters monitored such as the positivity rate, the recovery rate, and the mortality rate, are under control and to act accordingly. Monitoring cure and mortality rates will also show us the effectiveness of the treatments used.展开更多
Many industrial products are normally processed through multiple manufacturing process stages before it becomes a final product.Statistical process control techniques often utilize standard Shewhart control charts to ...Many industrial products are normally processed through multiple manufacturing process stages before it becomes a final product.Statistical process control techniques often utilize standard Shewhart control charts to monitor these process stages.If the process stages are independent,this is a meaningful procedure.However,they are not independent in many manufacturing scenarios.The standard Shewhart control charts can not provide the information to determine which process stage or group of process stages has caused the problems(i.e.,standard Shewhart control charts could not diagnose dependent manufacturing process stages).This study proposes a selective neural network ensemble-based cause-selecting system of control charts to monitor these process stages and distinguish incoming quality problems and problems in the current stage of a manufacturing process.Numerical results show that the proposed method is an improvement over the use of separate Shewhart control chart for each of dependent process stages,and even ordinary quality practitioners who lack of expertise in theoretical analysis can implement regression estimation and neural computing readily.展开更多
This paper proposes a model-based reference tracking scheme for stable,MIMO,nonlinear processes.A Joint Unscented Kalman Filtering technique is exploited here to develop a stochastic model of the physical process via ...This paper proposes a model-based reference tracking scheme for stable,MIMO,nonlinear processes.A Joint Unscented Kalman Filtering technique is exploited here to develop a stochastic model of the physical process via simultaneous estimation of the process states and the time-varying/uncertain parameters.Unlike the existing nonlinear model predictive controllers,the proposed scheme does not involve any dynamic optimisation process,which helps to reduce the overall complexity,computation overburden and execution time.Furthermore,the proposed methodology offers robustness to process model-mismatch and considers the effects of stochastic disturbances.A nonlinear two-tank liquid-level control problem and a nonlinear coupled level-temperature control process are studied to demonstrate the usefulness of the proposed scheme.展开更多
The data we use to express angle or direction are entitled directional data. In a plan right angled coordinate system the traditional control chart can’t solve the quality control problem which the characteristic val...The data we use to express angle or direction are entitled directional data. In a plan right angled coordinate system the traditional control chart can’t solve the quality control problem which the characteristic value is angle. This paper analyses and calculates the one valued control limits by control chart of angles.展开更多
The expression of residual is obtained according to its dynamic response to mean shift, then the distribu- tion of T2 statistic applied to the residual is derived, thus the probability of the 7a statistic lying outsid...The expression of residual is obtained according to its dynamic response to mean shift, then the distribu- tion of T2 statistic applied to the residual is derived, thus the probability of the 7a statistic lying outside the control limit is calculated. The above-mentioned results are substituted into the infinite definition expression of the average run length （ARL）, and then the final finite ARL expression is obtained. An example is used to demonstrate the procedures of the proposed method. In the comparative study, eight autocorrelated processes and four different mean shifts are performed, and the ARL values of the proposed method are compared with those obtained by simulation method with 50 000 replications. The accuracy of the proposed method can be illustrated through the comparative results.展开更多
Rahim and Banerjee [1] developed a general model for the optimal design of x-control charts. The model minimizes the expected cost per unit time. The heart of the model is a theorem that derives the expected total cos...Rahim and Banerjee [1] developed a general model for the optimal design of x-control charts. The model minimizes the expected cost per unit time. The heart of the model is a theorem that derives the expected total cost and the expected cycle length. In this paper an alternative simple proof for the theorem is provided based on mathematical induction.展开更多
The Pareto distribution plays an important role in various areas of research. In this paper, the average run length （ARL） unbiased control charts, which monitor the shape and threshold parameters of the Pareto distr...The Pareto distribution plays an important role in various areas of research. In this paper, the average run length （ARL） unbiased control charts, which monitor the shape and threshold parameters of the Pareto distribution respectively, are proposed when the incontrol parameters are known. The effects of parameter estimation on the performance of the proposed control charts are also studied. Results show that the control charts with the estimated parameters are not suitable to be used in the known parameter case, thus the ARL-unbiased control charts for the shape and threshold parameters with the desired ARLo, which consider the variability of the parameter estimates, are further developed. The performance of the proposed control charts is investigated in terms of the ARL. Finally, an example is given to illustrate the proposed control charts.展开更多
Much research effort has been devoted to economic design of X ＆ S control charts,however,there are some problems in usual methods.On the one hand,it is difficult to estimate the relationship between costs and other m...Much research effort has been devoted to economic design of X ＆ S control charts,however,there are some problems in usual methods.On the one hand,it is difficult to estimate the relationship between costs and other model parameters,so the economic design method is often not effective in producing charts that can quickly detect small shifts before substantial losses occur;on the other hand,in many cases,only one type of process shift or only one pair of process shifts are taken into consideration,which may not correctly reflect the actual process conditions.To improve the behavior of economic design of control chart,a cost ＆ loss model with Taguchi＇s loss function for the economic design of X ＆ S control charts is embellished,which is regarded as an optimization problem with multiple statistical constraints.The optimization design is also carried out based on a number of combinations of process shifts collected from the field operation of the conventional control charts,thus more hidden information about the shift combinations is mined and employed to the optimization design of control charts.At the same time,an improved particle swarm optimization（IPSO） is developed to solve such an optimization problem in design of X ＆ S control charts,IPSO is first tested for several benchmark problems from the literature and evaluated with standard performance metrics.Experimental results show that the proposed algorithm has significant advantages on obtaining the optimal design parameters of the charts.The proposed method can substantially reduce the total cost（or loss） of the control charts,and it will be a promising tool for economic design of control charts.展开更多
This paper analyzes the effect of subgroup size on the x-bar chart characteristics using sample influx (SIF) into forensic science laboratory (FSL). The characteristics studied include changes in out-or-control points...This paper analyzes the effect of subgroup size on the x-bar chart characteristics using sample influx (SIF) into forensic science laboratory (FSL). The characteristics studied include changes in out-or-control points (OCP), upper control limit UCLx, and zonal demarcations. Multi-rules were used to identify the number of out-of-control-points, Nocp as violations using five control chart rules applied separately. A sensitivity analysis on the Nocp was applied for subgroup size, k, and number of sigma above the mean value to determine the upper control limit, UCLx. A computer code was implemented using a FORTRAN code to create x-bar control-charts and capture OCP and other control-chart characteristics with increasing k from 2 to 25. For each value of k, a complete series of average values, Q(p), of specific length, Nsg, was created from which statistical analysis was conducted and compared to the original SIF data, S(t). The variation of number of out-of-control points or violations, Nocp, for different control-charts rules with increasing k was determined to follow a decaying exponential function, Nocp = Ae–α, for which, the goodness of fit was established, and the R2 value approached unity for Rule #4 and #5 only. The goodness of fit was established to be the new criteria for rational subgroup-size range, for Rules #5 and #4 only, which involve a count of 6 consecutive points decreasing and 8 consecutive points above the selected control limit (σ/3 above the grand mean), respectively. Using this criterion, the rational subgroup range was established to be 4 ≤ k ≤ 20 for the two x-bar control chart rules.展开更多
Nonparametric(distribution-free)control charts have been introduced in recent years when quality characteristics do not follow a specific distribution.When the sample selection is prohibitively expensive,we prefer ran...Nonparametric(distribution-free)control charts have been introduced in recent years when quality characteristics do not follow a specific distribution.When the sample selection is prohibitively expensive,we prefer ranked-set sampling over simple random sampling because ranked set sampling-based control charts outperform simple random sampling-based control charts.In this study,we proposed a nonparametric homogeneously weighted moving average based on theWilcoxon signed-rank test with ranked set sampling(NPHWMARSS)control chart for detecting shifts in the process location of a continuous and symmetric distribution.Monte Carlo simulations are used to obtain the run length characteristics to evaluate the performance of the proposed NPHWMARSS control chart.The proposed NPHWMARSS control chart’s performance is compared to that of parametric and nonparametric control charts.These control charts include the exponentially weighted moving average(EWMA)control chart,Wilcoxon signed-rank with simple random sampling based the nonparametric EWMA control chart,the nonparametric EWMA sign control chart,Wilcoxon signed-rank with ranked set sampling-based the nonparametric EWMA control chart,and the homogeneously weighted moving average control charts.The findings show that the proposed NPHWMARSS control chart performs better than its competitors,particularly for the small shifts.Finally,an example is presented to demonstrate how the proposed scheme can be implemented practically.展开更多
文摘In early 2018,the Boliden Garpenberg operation implemented an optimized control strategy as an addition to the existing ventilation on demand system.The purpose of the strategy is to further minimize energy use for main and booster fans,whilst also fulfilling airflow setpoints without violating constraints such as min/max differential pressure over fans and interaction of air between areas in mines.Using air flow measurements and a dynamical model of the ventilation system,a mine-wide coordination control of fans can be carried out.The numerical model is data driven and derived from historical operational data or step changes experiments.This makes both initial deployment and lifetime model maintenance,as the mine evolves,a comparably easy operation.The control has been proven to operate in a stable manner over long periods without having to re-calibrate the model.Results prove a 40%decrease in energy use for the fans involved and a greater controllability of air flow.Moreover,a 15%decrease of the total air flow into the mine will give additional proportional heating savings during winter periods.All in all,the multivariable controller shows a correlation between production in the mine and the ventilation system performance superior to all of its predecessors.
文摘In this paper,a novel control structure called feedback scheduling of model-based networked control systems is proposed to cope with a flexible network load and resource constraints.The state update time is adjusted according to the real-time network congestion situation.State observer is used under the situation where the state of the controlled plant could not be acquired.The stability criterion of the proposed structure is proved with time-varying state update time.On the basis of the stability of the novel system structure,the compromise between the control performance and the network utilization is realized by using feedback scheduler. Examples are provided to show the advantage of the proposed control structure.
文摘Monitoring temporal changes in sea level is important in assessing coastal risk.Sea level anomalies at a tide gauge station,if kinematically conceived,include systematic variations such as trend,acceleration,periodic oscillations,and random disturbances.Among them,the non-stationary nature of the random sea level variations of known or unknown origin at coastal regions has been long recognized by the sea level community.This study proposes the analyses of subgroups of random residual statistics of a rigorously formulated kinematic model solution of tide gauge variations using X-bar and S control charts.The approach is demonstrated using Key West,Florida tide gauge records.The mean and standard errors of 5-year-long subgroups of the residuals revealed that sea level changes at this location have been progressively intensifying from 1913 to the present.Increasing oscillations in sea level at this locality may be attributed partly to the thermal expansion of seawater with increasing temperatures causing larger buoyancy-related sea level fluctuations as well as the intensification of atmospheric events including wind patterns and the impact of changes in inverted barometer effects that will alter coastal risk assessments for the future.
基金Supported by The Inner Mongolia Autonomous Region's Key Research and Achievement Transformation Plan(2023YFHH0093).
文摘[Objectives]To establish a quality control chart of DHA in milk powder and determine whether the detection process and results are in control state.[Methods]The content of DHA in milk powder control samples was determined by gas chromatography,and the quality control chart of DHA was established to analyze the controlled state.[Results]the median of the quality control chart was 23.85 mg/100 g,and the standard deviation was 1.00 mg/100 g.In the evaluation and analysis of the new quality control points,it can be seen that the point beyond the warning limit was 1,and the outlier value was not beyond the action line,and the mean value did not change,indicating that the detection is in the statistical control state,and the detection process,method and results are controlled.[Conclusions]The establishment and review of the control chart in this study are expected to provide a reference for other subsequent quality controls.
基金the National Natural Science Foundation of China (No. 10671069, 60674046)
文摘In this paper, the control of a two-time-scale plant, where the sensor is connected to a linear controller/ actuator via a network is addressed. The slow and fast systems of singularly perturbed systems are used to produce an estimate of the plant state behavior between transmission times, by which one can reduce the usage of the network. The approximate solutions of the whole systems are derived and it is shown that the whole systems via the network control are generally asymptotically stable as long as their slow and fast systems are both stable. These results are also extended to the case of network delay.
基金Project supported by the Key Program for the National Natural Science Foundation of China(Grant No.61333003)the General Program for the National Natural Science Foundation of China(Grant No.61273104)
文摘This paper discusses the model-based predictive controller design of networked nonlinear systems with communica- tion delay and data loss. Based on the analysis of the closed-loop networked predictive control systems, the model-based networked predictive control strategy can compensate for communication delay and data loss in an active way. The designed model-based predictive controller can also guarantee the stability of the closed-loop networked system. The simulation re- suits demonstrate the feasibility and efficacy of the proposed model-based predictive controller design scheme.
文摘In the manufacturing processes of high value-added products in the pharmaceutical, fine chemical polymer and food industry, insufficient control might produce off-grade products. This can cause significant financial losses, or in the pharmaceutical industry, it can result in an unusable batch. In these industries, batch reactors are commonly used, the control of which is essentially a problem of temperature control. In the industry, an increasing number of heating-cooling systems utilising three different temperature levels can be found, which are advantageous from an economic point of view. However, it makes the control more complicated. This paper presents a split-range designing technique using the model of the controlled system with the aim to design a split-range algorithm more specific to the actual sys- tem. The algorithm described provides high control performance when using it with classical PID-based cascade temperature control of jacketed batch reactors;however, it can be used with or as part of other types of controllers, for ex- ample, model-based temperature controllers. The algorithm can be used in the case of systems where only two as well as where three temperature levels are used for temperature control. Besides the switching between the modes of opera- tion and calculating the value of the manipulated variable, one of the most important functions of the split-range algo- rithm is to keep the sign of the gain of the controlled system unchanged. However, with a more system-specific split-range solution, not only can the sign of the gain be kept unchanged, but the gain can also be constant or less de- pendent on the state of the system. Using this solution, the design of the PID controller becomes simpler and can be implemented in existing systems without serious changes.
基金funded by the Natural Science Basis Research Plan in Shaanxi Province of China(Program No.2023-JC-QN-0659)General Specialized Scientific Research Program of the Shaanxi Provincial Department of Education(Program 23JK0349).
文摘Legged robots have always been a focal point of research for scholars domestically and internationally.Compared to other types of robots,quadruped robots exhibit superior balance and stability,enabling them to adapt effectively to diverse environments and traverse rugged terrains.This makes them well-suited for applications such as search and rescue,exploration,and transportation,with strong environmental adaptability,high flexibility,and broad application prospects.This paper discusses the current state of research on quadruped robots in terms of development status,gait trajectory planning methods,motion control strategies,reinforcement learning applications,and control algorithm integration.It highlights advancements in modeling,optimization,control,and data-driven approaches.The study identifies the adoption of efficient gait planning algorithms,the integration of reinforcement learning-based control technologies,and data-driven methods as key directions for the development of quadruped robots.The aim is to provide theoretical references for researchers in the field of quadruped robotics.
文摘针对生鲜乳中兽药残留水平动态变化的特点,本研究探索构建一种基于历史数据的生鲜乳中兽药残留动态预警方法。基于Shewhart Control Chart理论,建立了兽药残留超标预警、检出率异常预警和平均值标准偏差预警方法。对中国某大型乳企的生鲜乳中氟甲喹和达氟沙星检测数据分析发现,无需触发风险预警,同时对假定出现的检出率异常和平均值异常预警情况进行了分析。
文摘The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns;natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.
文摘To monitor the quality characteristics of a process, appropriate graphical and statistical tools must be used. These tools are capable of showing the evolution over time of the behavior of the quality characteristics (measurable or countable) and detecting situations that seem to present certain anomalies. The control chart is one of these tools widely used in quality management. In the process of managing the COVID-19 pandemic, this tool will make it possible to know at all times whether the parameters monitored such as the positivity rate, the recovery rate, and the mortality rate, are under control and to act accordingly. Monitoring cure and mortality rates will also show us the effectiveness of the treatments used.
基金supported in part by the National Natural Science Foundation of China(No.51775279)the Fundamental Research Funds for the Central Universities(Nos. 1005-YAH15055,NS2017034)+2 种基金the China Postdoctoral Science Foundation(No.2016M591838)the Natural Science Foundation of Jiangsu Province (No.BK20150745)the Postdoctoral Science Foundation of of Jiangsu Province(No.1501024C)
文摘Many industrial products are normally processed through multiple manufacturing process stages before it becomes a final product.Statistical process control techniques often utilize standard Shewhart control charts to monitor these process stages.If the process stages are independent,this is a meaningful procedure.However,they are not independent in many manufacturing scenarios.The standard Shewhart control charts can not provide the information to determine which process stage or group of process stages has caused the problems(i.e.,standard Shewhart control charts could not diagnose dependent manufacturing process stages).This study proposes a selective neural network ensemble-based cause-selecting system of control charts to monitor these process stages and distinguish incoming quality problems and problems in the current stage of a manufacturing process.Numerical results show that the proposed method is an improvement over the use of separate Shewhart control chart for each of dependent process stages,and even ordinary quality practitioners who lack of expertise in theoretical analysis can implement regression estimation and neural computing readily.
基金supported by the Science and Engineering Research Board(SERB),DST,India[grant number SRG/2022/000892].
文摘This paper proposes a model-based reference tracking scheme for stable,MIMO,nonlinear processes.A Joint Unscented Kalman Filtering technique is exploited here to develop a stochastic model of the physical process via simultaneous estimation of the process states and the time-varying/uncertain parameters.Unlike the existing nonlinear model predictive controllers,the proposed scheme does not involve any dynamic optimisation process,which helps to reduce the overall complexity,computation overburden and execution time.Furthermore,the proposed methodology offers robustness to process model-mismatch and considers the effects of stochastic disturbances.A nonlinear two-tank liquid-level control problem and a nonlinear coupled level-temperature control process are studied to demonstrate the usefulness of the proposed scheme.
基金National Natural Science Foundation of China ( 70 0 72 0 33)
文摘The data we use to express angle or direction are entitled directional data. In a plan right angled coordinate system the traditional control chart can’t solve the quality control problem which the characteristic value is angle. This paper analyses and calculates the one valued control limits by control chart of angles.
基金Supported by National Natural Science Foundation of China (No.70931004 and No. 70802043)
文摘The expression of residual is obtained according to its dynamic response to mean shift, then the distribu- tion of T2 statistic applied to the residual is derived, thus the probability of the 7a statistic lying outside the control limit is calculated. The above-mentioned results are substituted into the infinite definition expression of the average run length （ARL）, and then the final finite ARL expression is obtained. An example is used to demonstrate the procedures of the proposed method. In the comparative study, eight autocorrelated processes and four different mean shifts are performed, and the ARL values of the proposed method are compared with those obtained by simulation method with 50 000 replications. The accuracy of the proposed method can be illustrated through the comparative results.
文摘Rahim and Banerjee [1] developed a general model for the optimal design of x-control charts. The model minimizes the expected cost per unit time. The heart of the model is a theorem that derives the expected total cost and the expected cycle length. In this paper an alternative simple proof for the theorem is provided based on mathematical induction.
基金Supported by Foundation of Ministry of Education of China(13YJC910005,13YJC910010,12YJA910005)Zhejiang Provincial Natural Science Foundation of China(LY16G020003)+2 种基金the Philosophy and Social Science Research Project in Zhejiang Province of China(13NDJC055YB)the National Natural Science Foundation of China(11371322)the Zhejiang Provincial Key Research Base for Humanities and Social Science Research(Statistics)
文摘The Pareto distribution plays an important role in various areas of research. In this paper, the average run length （ARL） unbiased control charts, which monitor the shape and threshold parameters of the Pareto distribution respectively, are proposed when the incontrol parameters are known. The effects of parameter estimation on the performance of the proposed control charts are also studied. Results show that the control charts with the estimated parameters are not suitable to be used in the known parameter case, thus the ARL-unbiased control charts for the shape and threshold parameters with the desired ARLo, which consider the variability of the parameter estimates, are further developed. The performance of the proposed control charts is investigated in terms of the ARL. Finally, an example is given to illustrate the proposed control charts.
基金supported by Defense Industrial Technology Development Program of China (Grant No. A2520110003)
文摘Much research effort has been devoted to economic design of X ＆ S control charts,however,there are some problems in usual methods.On the one hand,it is difficult to estimate the relationship between costs and other model parameters,so the economic design method is often not effective in producing charts that can quickly detect small shifts before substantial losses occur;on the other hand,in many cases,only one type of process shift or only one pair of process shifts are taken into consideration,which may not correctly reflect the actual process conditions.To improve the behavior of economic design of control chart,a cost ＆ loss model with Taguchi＇s loss function for the economic design of X ＆ S control charts is embellished,which is regarded as an optimization problem with multiple statistical constraints.The optimization design is also carried out based on a number of combinations of process shifts collected from the field operation of the conventional control charts,thus more hidden information about the shift combinations is mined and employed to the optimization design of control charts.At the same time,an improved particle swarm optimization（IPSO） is developed to solve such an optimization problem in design of X ＆ S control charts,IPSO is first tested for several benchmark problems from the literature and evaluated with standard performance metrics.Experimental results show that the proposed algorithm has significant advantages on obtaining the optimal design parameters of the charts.The proposed method can substantially reduce the total cost（or loss） of the control charts,and it will be a promising tool for economic design of control charts.
文摘This paper analyzes the effect of subgroup size on the x-bar chart characteristics using sample influx (SIF) into forensic science laboratory (FSL). The characteristics studied include changes in out-or-control points (OCP), upper control limit UCLx, and zonal demarcations. Multi-rules were used to identify the number of out-of-control-points, Nocp as violations using five control chart rules applied separately. A sensitivity analysis on the Nocp was applied for subgroup size, k, and number of sigma above the mean value to determine the upper control limit, UCLx. A computer code was implemented using a FORTRAN code to create x-bar control-charts and capture OCP and other control-chart characteristics with increasing k from 2 to 25. For each value of k, a complete series of average values, Q(p), of specific length, Nsg, was created from which statistical analysis was conducted and compared to the original SIF data, S(t). The variation of number of out-of-control points or violations, Nocp, for different control-charts rules with increasing k was determined to follow a decaying exponential function, Nocp = Ae–α, for which, the goodness of fit was established, and the R2 value approached unity for Rule #4 and #5 only. The goodness of fit was established to be the new criteria for rational subgroup-size range, for Rules #5 and #4 only, which involve a count of 6 consecutive points decreasing and 8 consecutive points above the selected control limit (σ/3 above the grand mean), respectively. Using this criterion, the rational subgroup range was established to be 4 ≤ k ≤ 20 for the two x-bar control chart rules.
基金Funds are available under the Grant No.RGP.2/132/43 at King Khalid University,Kingdom of Saudi Arabia.
文摘Nonparametric(distribution-free)control charts have been introduced in recent years when quality characteristics do not follow a specific distribution.When the sample selection is prohibitively expensive,we prefer ranked-set sampling over simple random sampling because ranked set sampling-based control charts outperform simple random sampling-based control charts.In this study,we proposed a nonparametric homogeneously weighted moving average based on theWilcoxon signed-rank test with ranked set sampling(NPHWMARSS)control chart for detecting shifts in the process location of a continuous and symmetric distribution.Monte Carlo simulations are used to obtain the run length characteristics to evaluate the performance of the proposed NPHWMARSS control chart.The proposed NPHWMARSS control chart’s performance is compared to that of parametric and nonparametric control charts.These control charts include the exponentially weighted moving average(EWMA)control chart,Wilcoxon signed-rank with simple random sampling based the nonparametric EWMA control chart,the nonparametric EWMA sign control chart,Wilcoxon signed-rank with ranked set sampling-based the nonparametric EWMA control chart,and the homogeneously weighted moving average control charts.The findings show that the proposed NPHWMARSS control chart performs better than its competitors,particularly for the small shifts.Finally,an example is presented to demonstrate how the proposed scheme can be implemented practically.
