Floods are phenomenon with significant socio-economic implications mainly for human loss, agriculture, livestock, soil loss and land degradation, for which many researchers try to identify the most appropriate methodo...Floods are phenomenon with significant socio-economic implications mainly for human loss, agriculture, livestock, soil loss and land degradation, for which many researchers try to identify the most appropriate methodologies by analyzing their temporal and spatial development. This study therefore attempts to employ the GIS-based multi-criteria decision analysis and analytical hierarchy process techniques to derive the flood risks management on rice productivity in the Gishari Agricultural Marshland in Rwamagana district, Rwanda. Here, six influencing potential factors to flooding, including river slope, soil texture, Land Use Land Cover through Land Sat 8, rainfall, river distance and Digital Elevation Model are considered for the delineation of flood risk zones. Data acquisition like Landsat 8 images, DEM, land use land cover, slope, and soil class in the study area were considered. Results showed that if the DEM is outdated or inaccurate due to changes in the terrain, such as construction, excavation, or erosion, the predicted flood patterns might not reflect the actual water flow. This could result unexpected flood extents and depths, potentially inundating rice fields that were not previously at risk and this, expectedly explained that the increase 1 m in elevation would reduce the rice productivity by 0.17% due to unplanned flood risks in marshland. It was found that the change in rainfall distribution in Gishari agricultural marshland would also decrease the rice productivity by 0.0018%, which is a sign that rainfall is a major factor of flooding in rice scheme. Rainfall distribution plays a crucial role in flooding analysis and can directly impact rice productivity. Oppositely, another causal factor was Land Use Land Cover (LULC), where the Multivariate Logistic Regression Model Analysis findings showed that the increase of one unit in Land Use Land Cover would increase rice productivity by 0.17% of the total rice productivity from the Gishari Agricultural Marshland. Based on findings from these techniques, the Gishari Agricultural Marshlands having steeped land with grassland is classified into five classes of flooding namely very low, low, moderate, high, and very high which include 430%, 361%, 292%, 223%, and 154%. Government of Rwanda and other implementing agencies and major key actors have to contribute on soil and water conservation strategies to reduce the runoff and soil erosion as major contributors of flooding.展开更多
Aspect-oriented sentiment analysis is a meticulous sentiment analysis task that aims to analyse the sentiment polarity of specific aspects. Most of the current research builds graph convolutional networks based on dep...Aspect-oriented sentiment analysis is a meticulous sentiment analysis task that aims to analyse the sentiment polarity of specific aspects. Most of the current research builds graph convolutional networks based on dependent syntactic trees, which improves the classification performance of the models to some extent. However, the technical limitations of dependent syntactic trees can introduce considerable noise into the model. Meanwhile, it is difficult for a single graph convolutional network to aggregate both semantic and syntactic structural information of nodes, which affects the final sentence classification. To cope with the above problems, this paper proposes a bi-channel graph convolutional network model. The model introduces a phrase structure tree and transforms it into a hierarchical phrase matrix. The adjacency matrix of the dependent syntactic tree and the hierarchical phrase matrix are combined as the initial matrix of the graph convolutional network to enhance the syntactic information. The semantic information feature representations of the sentences are obtained by the graph convolutional network with a multi-head attention mechanism and fused to achieve complementary learning of dual-channel features. Experimental results show that the model performs well and improves the accuracy of sentiment classification on three public benchmark datasets, namely Rest14, Lap14 and Twitter.展开更多
As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations bas...As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations based on reliable criteria that best discriminate soil cover. With this in mind, this study is being carried out to help improve survey methods by mapping soil landscapes. It uses GIS and weighted multicriteria analysis. To do this, satellite images were processed and the geological map of the square degrees of M’Bahiakro and Daloa was reclassified. The results show that relief is the main factor in soil landscape differentiation, with respective weights of 0.58 and 0.67 for the forest and pre-forest zones. In contrast, the weight of geological formation in soil landscape differentiation remains low (0.05 for the forest zone and 0.07 for the pre-forest zone). The criteria used on the base of aggregation sum methods have made it possible to formulate soil landscape mapping prediction functions according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation of soil survey work. Nevertheless, other comparative methods, such as the coding mapping method, could provide elements for discussion to validate the models.展开更多
The advent of the digital era has provided unprecedented opportunities for businesses to collect and analyze customer behavior data. Precision marketing, as a key means to improve marketing efficiency, highly depends ...The advent of the digital era has provided unprecedented opportunities for businesses to collect and analyze customer behavior data. Precision marketing, as a key means to improve marketing efficiency, highly depends on a deep understanding of customer behavior. This study proposes a theoretical framework for multi-dimensional customer behavior analysis, aiming to comprehensively capture customer behavioral characteristics in the digital environment. This framework integrates concepts of multi-source data including transaction history, browsing trajectories, social media interactions, and location information, constructing a theoretically more comprehensive customer profile. The research discusses the potential applications of this theoretical framework in precision marketing scenarios such as personalized recommendations, cross-selling, and customer churn prevention. Through analysis, the study points out that multi-dimensional analysis may significantly improve the targeting and theoretical conversion rates of marketing activities. However, the research also explores theoretical challenges that may be faced in the application process, such as data privacy and information overload, and proposes corresponding conceptual coping strategies. This study provides a new theoretical perspective on how businesses can optimize marketing decisions using big data thinking while respecting customer privacy, laying a foundation for future empirical research.展开更多
Identifying the active and inactive period of earthquakes in Chinese mainland is of great importance for guiding mid-short term, especially short term, earthquake forecast.……
In the diagnosis of rotor crack based on wavelet analysis, it is a painful task to find out an adaptive mother wavelet as many of them can be chosen and the analytic results of different mother wavelets are yet not th...In the diagnosis of rotor crack based on wavelet analysis, it is a painful task to find out an adaptive mother wavelet as many of them can be chosen and the analytic results of different mother wavelets are yet not the same. For this limitation of wavelet analysis, a novel diagnostic approach of rotor crack based on multi-scale singular-spectrum analysis （MS-SSA） is proposed. Firstly, a Jeffcott model of a cracked rotor is developed and the forth-order Runge-Kutta method is used to solve the motion equations of this rotor to obtain its time response （signals）. Secondly, a comparatively simple approach of MS-SSA is presented and the empirical orthogonal functions of different orders in various scales are regarded as analyzing functions. At last, the signals of the cracked rotor and an uncracked rotor are analyzed using the proposed approach of MS-SSA, and the simulative results are compared. The results show that, the data-adaptive analyzing functions can capture many features of signals and the rotor crack can be identified and diagnosed effectively by comparing the analytic results of signals of the cracked rotor with those of the uncracked rotor using the analyzing functions of different orders.展开更多
Feature extraction of signals plays an important role in classification problems because of data dimension reduction property and potential improvement of a classification accuracy rate. Principal component analysis (...Feature extraction of signals plays an important role in classification problems because of data dimension reduction property and potential improvement of a classification accuracy rate. Principal component analysis (PCA), wavelets transform or Fourier transform methods are often used for feature extraction. In this paper, we propose a multi-scale PCA, which combines discrete wavelet transform, and PCA for feature extraction of signals in both the spatial and temporal domains. Our study shows that the multi-scale PCA combined with the proposed new classification methods leads to high classification accuracy for the considered signals.展开更多
A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D F...A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D FEM of 7 nodes and 10 nodes are constructed based on the basic formula. Using these proposed elements, the multiscale numerical model for foundation subjected to harmonic periodic load, the foundation model excited by external and internal dynamic load are studied. The results show the pro- posed finite elements have higher precision than the tradi- tional elements with 4 nodes. The proposed finite elements can describe the propagation of stress waves well whenever the foundation model excited by extemal or intemal dynamic load. The proposed finite elements can be also used to con- nect the multi-scale elements. And the proposed finite elements also have high precision to make multi-scale analysis for structure.展开更多
Inspired by the coarse-to-fine visual perception process of human vision system,a new approach based on Gaussian multi-scale space for defect detection of industrial products was proposed.By selecting different scale ...Inspired by the coarse-to-fine visual perception process of human vision system,a new approach based on Gaussian multi-scale space for defect detection of industrial products was proposed.By selecting different scale parameters of the Gaussian kernel,the multi-scale representation of the original image data could be obtained and used to constitute the multi- variate image,in which each channel could represent a perceptual observation of the original image from different scales.The Multivariate Image Analysis (MIA) techniques were used to extract defect features information.The MIA combined Principal Component Analysis (PCA) to obtain the principal component scores of the multivariate test image.The Q-statistic image, derived from the residuals after the extraction of the first principal component score and noise,could be used to efficiently reveal the surface defects with an appropriate threshold value decided by training images.Experimental results show that the proposed method performs better than the gray histogram-based method.It has less sensitivity to the inhomogeneous of illumination,and has more robustness and reliability of defect detection with lower pseudo reject rate.展开更多
This article presents a novel image interpolation based on rational fractal fimction. The rational function has a simple and explicit expression. At the same time, the fi＇actal interpolation surface can be defined by...This article presents a novel image interpolation based on rational fractal fimction. The rational function has a simple and explicit expression. At the same time, the fi＇actal interpolation surface can be defined by proper parameters. In this paper, we used the method of ＇covering blanket＇ combined with multi-scale analysis; the threshold is selected based on the multi-scale analysis. Selecting different parameters in the rational function model, the texture regions and smooth regions are interpolated by rational fractal interpolation and rational interpolation respectively. Experimental results on benchmark test images demonstrate that the proposed method achieves very competitive performance compared with the state-of-the-art interpolation algorithms, especially in image details and texture features.展开更多
A mei-yu front process in the lower reaches of the Yangtze River on 23 June 1999 was simulated by using the fifth-generation Pennsylvania State University-NCAR （PSU/NCAR） Mesoscale Model （MM5） with FDDA （Four Dim...A mei-yu front process in the lower reaches of the Yangtze River on 23 June 1999 was simulated by using the fifth-generation Pennsylvania State University-NCAR （PSU/NCAR） Mesoscale Model （MM5） with FDDA （Four Dimension Data Assimilation）. The analysis shows that seven weak small mesoscale vortexes of tens of kilometers, correspondent to surface low trough or mesoscale centers, in the planetary boundary layer （PBL） in the mei-yu front were heavily responsible for the heavy rainfall. Sometimes, several weak small-scale vortexes in the PBL could form a vortex group, some of which would weaken locally, and some would develop to be a meso-α-scale low vortex through combination. The initial dynamical triggering mechanism was related to two strong currents： one was the northeast flow in the PBL at the rear of the mei-yu front, the vortexes occurred exactly at the side of the northeast flow; and the other was the strong southwest low-level jet （LLJ） in front of the Mei-yu front, which moved to the upper of the vortexes. Consequently, there were notable horizontal and vertical wind shears to form positive vorticity in the center of the southwest LLJ. The development of mesoscale convergence in the PBL and divergence above, as well as the vertical positive vorticity column, were related to the small wind column above the nose-shaped velocity contours of the northeast flow embedding southwestward in the PBL, which intensified the horizontal wind shear and the positive vorticity column above the vortexes, baroclinicity and instability.展开更多
A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were c...A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.展开更多
In order to make a rational prediction of the Dead Sea shape, data were prepared for suitability map creation using Markov Chain analysis and Multi Criteria Evaluation (MCE). Then, Markov Cellular Automata model and s...In order to make a rational prediction of the Dead Sea shape, data were prepared for suitability map creation using Markov Chain analysis and Multi Criteria Evaluation (MCE). Then, Markov Cellular Automata model and spatial statistics were used in prediction and validation processes. The validation process shows a standard Kappa index of 0.9545 which means a strong relation between the model and reality. The predicted shapes of years 2020, 2030 and 2040 follow the same conditions from 1984 to 2010. The predicted areas of 2020, 2030 and 2040 are 610, 591 and 574 km2 which are considered a logical extension of the trend from 1984 till 2010. This study can be used as an environmental alert in order to keep the Dead Sea alive. Moreover, Markov-Cellular Automata model can be used to predict closed seas as the Dead Sea from remote sensed data.展开更多
BACKGROUND: In the early period of orthotopic liver transplantation (OLT), initial poor graft function (IPGF) is one of the complications which leads to primary graft non-function (PGNF) in serious cases. This study s...BACKGROUND: In the early period of orthotopic liver transplantation (OLT), initial poor graft function (IPGF) is one of the complications which leads to primary graft non-function (PGNF) in serious cases. This study set out to establish the clinical risk factors resulting in IPGF after OLT. METHODS: Eighty cases of OLT were analyzed. The IPGF group consisted of patients with alanine aminotransferase (ALT) and/or aspartate aminotransferase (AST) above 1500 IU/L within 72 hours after OLT, while those in the non-IPGF group had values below 1500 IU/L. Recipient-associated factors before OLT analyzed were age, sex, primary liver disease and Child-Pugh classification; factors analyzed within the peri-operative period were non-heart beating time (NHBT), cold ischemia time (CIT), rewarming ischemic time (RWIT), liver biopsy at the end of cold ischemia; and factors analyzed within 72 hours after OLT were ALT and/or AST values. A logistic regression model was applied to filter the possible factors resulting in IPGF. RESULTS: Donor NHBT, CIT and RWIT were significantly longer in the IPGF group than in the non-IPGF group; in the logistic regression model, NHBT was the risk factor leading to IPGF (P < 0.05), while CIT and RWIT were possible risk factors. In one case in the IPGF group, PGNF appeared with moderate hepatic steatosis. CONCLUSIONS: Longer NHBT is an important risk factor leading to IPGF, while serious steatosis in the donor liver, CIT and RWIT are potential risk factors.展开更多
Dynamic spectrum access(DSA) based on cognitive radios(CR) technique is an effective approach to address the "spectrum scarcity" issue. However, traditional CR-enabled DSA system employs only single DSA stra...Dynamic spectrum access(DSA) based on cognitive radios(CR) technique is an effective approach to address the "spectrum scarcity" issue. However, traditional CR-enabled DSA system employs only single DSA strategy, which might not be suited to the dynamic network environment. In this paper, we propose a multi-strategy DSA(MS-DSA) system, where the primary and the secondary system share spectrum resources with multiple DSA strategies simultaneously. To analyze the performance of the proposed MS-DSA system, we model it as a continuous-time Markov chain(CTMC) and derive the expressions to compute the corresponding performance metrics. Based on this, we define a utility function involving the concerns of effective throughput, interference quantity on primary users, and spectrum leasing cost. Two optimization schemes, named as spectrum allocation and false alarm probability selection, are proposed to maximize the utility function. Finally, numerical simulations are provided to validate our analysis and demonstrate that the performance can be significantly improved caused by virtues of the proposed MS-DSA system.展开更多
The multi-piece post-crown technique is more effective in restoring residual root than other restoration techniques.Various types of adhesives have different material properties that affect restoration.Therefore,the c...The multi-piece post-crown technique is more effective in restoring residual root than other restoration techniques.Various types of adhesives have different material properties that affect restoration.Therefore,the choice of adhesive is particularly important for patients.However,the effect of different kinds of adhesives was not too precise by experimental methods when concerning about individual differences of teeth.One tooth root can only be restored with one type of adhesive in experiment.After the mechanical test,this tooth root cannot be restored with other adhesives.With the help of medical imaging technology,reverse engineering and finite element analysis,a molar model can be reconstructed precisely and restored using different types of adhesives.The same occlusal and chewing loads were exerted on the same restored residual root models with different types of adhesives separately.Results of von Mises stress analysis showed that the adhesives with low Young’s modulus can protect the root canal effectively.However,a root canal concentration is apparently produced around the root canal orifice when chewing.Adhesives with large Young’s modulus can buffer the stress concentration of the root canal orifice.However,the root canal tissue may be destroyed because the adhesive is too hard to buffer the load.展开更多
The aluminum alloy parts used in airbag of car were studied with flow control forming(FCF) method, which was a good way to low forming force and better mechanical properties. The key technology of FCF was the design o...The aluminum alloy parts used in airbag of car were studied with flow control forming(FCF) method, which was a good way to low forming force and better mechanical properties. The key technology of FCF was the design of control chamber to divide metal flow. So, the design method of FCF was analyzed and two type of control chamber were put forward. According to divisional principle, calculation model of forming force and approximate formula were given. Then forming process of aluminum alloy multi-layer cylinder parts was simulated. The effect of friction factor, die radius and punch velocity on metal flow and forming force was obtained. Finally, the experiment was preformed under the direction of theory and finite element(FE) simulation results. And the qualified parts were manufactured. The simulation data and experimental results show that the forming sequence of inner wall and outer wall, and then the force step, can be controlled by adjusting the process parameters. And the FCF technology proposed has very important application value in precision forging.展开更多
Natural resources management is indispensable in ensuring environmental sustainability and reducing the risk associated with climate change and increasing demand for ecological goods and services. Natural resources pl...Natural resources management is indispensable in ensuring environmental sustainability and reducing the risk associated with climate change and increasing demand for ecological goods and services. Natural resources planners need to have at their disposal tools that can objectively help in prioritizing land use allocation. Traditional application of land use change model based on economic model, trend analysis, and or scenario analysis present some challenges of data availability and reliability necessary for implementation of the models. However, with the advent of information technology, GIS and remote sensing, biophysical data known for having influence on land use allocation can easily be accessed. The current study explores the application of GIS-Multi-criteria analysis in modeling future land use scenarios for resources planning and management using easy to construct biophysical parameters known for influencing future land use allocation. The decision problems in this study are to find the best spatial allocation of land to future agriculture and forest development, which are considered to present critical land use change in the study area. The afforestation scenarios are meant to offset the pressure on the native forest resources due to the increased demand for fuel and timber and also to contribute to the environmental protection and the agricultural land use scenarios are meant to increase productivity and ensure environmental protection. The land use scenarios did not consider “when” in the future the land use pattern may develop. The analyses of scenarios indicate that afforestation extent in the basin can be increased from 4.6% to 42.9% of the total basin area. However, the afforestation extent of 42.9% may be considered unrealistic, since in practice, it may not be possible to realize up to 42.9% afforestation, nevertheless, the spatial pattern of the afforestation may provide crucial insight into spatial afforestation policies and it future consequences. The agricultural land use can increase from 6.2% to 53.7% of the basin area. The agricultural land use expansion can be realised since the expansion of farm land is primarily the main option to achieve food production increase in the near future. The findings indicate potential use of the methodology in land use planning.展开更多
Components of electromechanical systems usually contain multiple performance parameters and degrade over time. In previous studies, the reliability of these electromechanical systems was analyzed by the traditional me...Components of electromechanical systems usually contain multiple performance parameters and degrade over time. In previous studies, the reliability of these electromechanical systems was analyzed by the traditional method, and the system reliability was estimated based on the reliability of components and the structures of the systems. The system reliability estimated by the traditional method could not reflect the performance of the systems. A new method is proposed in this paper to analyze the system reliability according to the data of multiple performance degraded processes of components. The performance distribution of a degraded component is obtained by the performance degradation analysis, and then states of the component are defined and corresponding state probabilities are estimated. The universal generating function method is proposed and extended to compute the performance distribution and reliability of the system based on the performances of components. A numerical example illustrates the proposed method. The results of the example show that the proposed method can relate the performance of the system to the performances of components and absolutely reflect the relationship between reliability and performance. Compared with the exact values of the system reliability, the results obtained by the proposed method is almost the same with the exact values, and the results obtained by the traditional method are conservative. The proposed method overcomes the shortcomings of the traditional method and provides a new approach to analyze the reliability of electromechanical systems with degraded components containing multiple performance parameters.展开更多
A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample ...A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.展开更多
文摘Floods are phenomenon with significant socio-economic implications mainly for human loss, agriculture, livestock, soil loss and land degradation, for which many researchers try to identify the most appropriate methodologies by analyzing their temporal and spatial development. This study therefore attempts to employ the GIS-based multi-criteria decision analysis and analytical hierarchy process techniques to derive the flood risks management on rice productivity in the Gishari Agricultural Marshland in Rwamagana district, Rwanda. Here, six influencing potential factors to flooding, including river slope, soil texture, Land Use Land Cover through Land Sat 8, rainfall, river distance and Digital Elevation Model are considered for the delineation of flood risk zones. Data acquisition like Landsat 8 images, DEM, land use land cover, slope, and soil class in the study area were considered. Results showed that if the DEM is outdated or inaccurate due to changes in the terrain, such as construction, excavation, or erosion, the predicted flood patterns might not reflect the actual water flow. This could result unexpected flood extents and depths, potentially inundating rice fields that were not previously at risk and this, expectedly explained that the increase 1 m in elevation would reduce the rice productivity by 0.17% due to unplanned flood risks in marshland. It was found that the change in rainfall distribution in Gishari agricultural marshland would also decrease the rice productivity by 0.0018%, which is a sign that rainfall is a major factor of flooding in rice scheme. Rainfall distribution plays a crucial role in flooding analysis and can directly impact rice productivity. Oppositely, another causal factor was Land Use Land Cover (LULC), where the Multivariate Logistic Regression Model Analysis findings showed that the increase of one unit in Land Use Land Cover would increase rice productivity by 0.17% of the total rice productivity from the Gishari Agricultural Marshland. Based on findings from these techniques, the Gishari Agricultural Marshlands having steeped land with grassland is classified into five classes of flooding namely very low, low, moderate, high, and very high which include 430%, 361%, 292%, 223%, and 154%. Government of Rwanda and other implementing agencies and major key actors have to contribute on soil and water conservation strategies to reduce the runoff and soil erosion as major contributors of flooding.
文摘Aspect-oriented sentiment analysis is a meticulous sentiment analysis task that aims to analyse the sentiment polarity of specific aspects. Most of the current research builds graph convolutional networks based on dependent syntactic trees, which improves the classification performance of the models to some extent. However, the technical limitations of dependent syntactic trees can introduce considerable noise into the model. Meanwhile, it is difficult for a single graph convolutional network to aggregate both semantic and syntactic structural information of nodes, which affects the final sentence classification. To cope with the above problems, this paper proposes a bi-channel graph convolutional network model. The model introduces a phrase structure tree and transforms it into a hierarchical phrase matrix. The adjacency matrix of the dependent syntactic tree and the hierarchical phrase matrix are combined as the initial matrix of the graph convolutional network to enhance the syntactic information. The semantic information feature representations of the sentences are obtained by the graph convolutional network with a multi-head attention mechanism and fused to achieve complementary learning of dual-channel features. Experimental results show that the model performs well and improves the accuracy of sentiment classification on three public benchmark datasets, namely Rest14, Lap14 and Twitter.
文摘As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations based on reliable criteria that best discriminate soil cover. With this in mind, this study is being carried out to help improve survey methods by mapping soil landscapes. It uses GIS and weighted multicriteria analysis. To do this, satellite images were processed and the geological map of the square degrees of M’Bahiakro and Daloa was reclassified. The results show that relief is the main factor in soil landscape differentiation, with respective weights of 0.58 and 0.67 for the forest and pre-forest zones. In contrast, the weight of geological formation in soil landscape differentiation remains low (0.05 for the forest zone and 0.07 for the pre-forest zone). The criteria used on the base of aggregation sum methods have made it possible to formulate soil landscape mapping prediction functions according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation of soil survey work. Nevertheless, other comparative methods, such as the coding mapping method, could provide elements for discussion to validate the models.
文摘The advent of the digital era has provided unprecedented opportunities for businesses to collect and analyze customer behavior data. Precision marketing, as a key means to improve marketing efficiency, highly depends on a deep understanding of customer behavior. This study proposes a theoretical framework for multi-dimensional customer behavior analysis, aiming to comprehensively capture customer behavioral characteristics in the digital environment. This framework integrates concepts of multi-source data including transaction history, browsing trajectories, social media interactions, and location information, constructing a theoretically more comprehensive customer profile. The research discusses the potential applications of this theoretical framework in precision marketing scenarios such as personalized recommendations, cross-selling, and customer churn prevention. Through analysis, the study points out that multi-dimensional analysis may significantly improve the targeting and theoretical conversion rates of marketing activities. However, the research also explores theoretical challenges that may be faced in the application process, such as data privacy and information overload, and proposes corresponding conceptual coping strategies. This study provides a new theoretical perspective on how businesses can optimize marketing decisions using big data thinking while respecting customer privacy, laying a foundation for future empirical research.
基金Chinese Joint Seismological Science Foundation and the Chinese-Greece Cooperation Project.
文摘Identifying the active and inactive period of earthquakes in Chinese mainland is of great importance for guiding mid-short term, especially short term, earthquake forecast.……
基金This project is supported by National Fundamental Research and Development Project Foundation of China(No.G1998020321).
文摘In the diagnosis of rotor crack based on wavelet analysis, it is a painful task to find out an adaptive mother wavelet as many of them can be chosen and the analytic results of different mother wavelets are yet not the same. For this limitation of wavelet analysis, a novel diagnostic approach of rotor crack based on multi-scale singular-spectrum analysis （MS-SSA） is proposed. Firstly, a Jeffcott model of a cracked rotor is developed and the forth-order Runge-Kutta method is used to solve the motion equations of this rotor to obtain its time response （signals）. Secondly, a comparatively simple approach of MS-SSA is presented and the empirical orthogonal functions of different orders in various scales are regarded as analyzing functions. At last, the signals of the cracked rotor and an uncracked rotor are analyzed using the proposed approach of MS-SSA, and the simulative results are compared. The results show that, the data-adaptive analyzing functions can capture many features of signals and the rotor crack can be identified and diagnosed effectively by comparing the analytic results of signals of the cracked rotor with those of the uncracked rotor using the analyzing functions of different orders.
文摘Feature extraction of signals plays an important role in classification problems because of data dimension reduction property and potential improvement of a classification accuracy rate. Principal component analysis (PCA), wavelets transform or Fourier transform methods are often used for feature extraction. In this paper, we propose a multi-scale PCA, which combines discrete wavelet transform, and PCA for feature extraction of signals in both the spatial and temporal domains. Our study shows that the multi-scale PCA combined with the proposed new classification methods leads to high classification accuracy for the considered signals.
基金supported by the National Natural Science Foundation of China (51109029,51178081,51138001,and 51009020)the State Key Development Program for Basic Research of China (2013CB035905)
文摘A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D FEM of 7 nodes and 10 nodes are constructed based on the basic formula. Using these proposed elements, the multiscale numerical model for foundation subjected to harmonic periodic load, the foundation model excited by external and internal dynamic load are studied. The results show the pro- posed finite elements have higher precision than the tradi- tional elements with 4 nodes. The proposed finite elements can describe the propagation of stress waves well whenever the foundation model excited by extemal or intemal dynamic load. The proposed finite elements can be also used to con- nect the multi-scale elements. And the proposed finite elements also have high precision to make multi-scale analysis for structure.
基金supported in part by the Natural Science Foundation of China (NSFC) (Grant No:50875240).
文摘Inspired by the coarse-to-fine visual perception process of human vision system,a new approach based on Gaussian multi-scale space for defect detection of industrial products was proposed.By selecting different scale parameters of the Gaussian kernel,the multi-scale representation of the original image data could be obtained and used to constitute the multi- variate image,in which each channel could represent a perceptual observation of the original image from different scales.The Multivariate Image Analysis (MIA) techniques were used to extract defect features information.The MIA combined Principal Component Analysis (PCA) to obtain the principal component scores of the multivariate test image.The Q-statistic image, derived from the residuals after the extraction of the first principal component score and noise,could be used to efficiently reveal the surface defects with an appropriate threshold value decided by training images.Experimental results show that the proposed method performs better than the gray histogram-based method.It has less sensitivity to the inhomogeneous of illumination,and has more robustness and reliability of defect detection with lower pseudo reject rate.
基金Supported by National Natural Science Foundation of China(Nos.6137308061402261+3 种基金61303088U1201258)Promotive Research Fund for Excellent Young and Middle-aged Scientists of Shandong Province(Nos.BS2013DX039BS2013DX048)
文摘This article presents a novel image interpolation based on rational fractal fimction. The rational function has a simple and explicit expression. At the same time, the fi＇actal interpolation surface can be defined by proper parameters. In this paper, we used the method of ＇covering blanket＇ combined with multi-scale analysis; the threshold is selected based on the multi-scale analysis. Selecting different parameters in the rational function model, the texture regions and smooth regions are interpolated by rational fractal interpolation and rational interpolation respectively. Experimental results on benchmark test images demonstrate that the proposed method achieves very competitive performance compared with the state-of-the-art interpolation algorithms, especially in image details and texture features.
基金supported by the National Natural Science Foundation of China under Grant No.40505011.
文摘A mei-yu front process in the lower reaches of the Yangtze River on 23 June 1999 was simulated by using the fifth-generation Pennsylvania State University-NCAR （PSU/NCAR） Mesoscale Model （MM5） with FDDA （Four Dimension Data Assimilation）. The analysis shows that seven weak small mesoscale vortexes of tens of kilometers, correspondent to surface low trough or mesoscale centers, in the planetary boundary layer （PBL） in the mei-yu front were heavily responsible for the heavy rainfall. Sometimes, several weak small-scale vortexes in the PBL could form a vortex group, some of which would weaken locally, and some would develop to be a meso-α-scale low vortex through combination. The initial dynamical triggering mechanism was related to two strong currents： one was the northeast flow in the PBL at the rear of the mei-yu front, the vortexes occurred exactly at the side of the northeast flow; and the other was the strong southwest low-level jet （LLJ） in front of the Mei-yu front, which moved to the upper of the vortexes. Consequently, there were notable horizontal and vertical wind shears to form positive vorticity in the center of the southwest LLJ. The development of mesoscale convergence in the PBL and divergence above, as well as the vertical positive vorticity column, were related to the small wind column above the nose-shaped velocity contours of the northeast flow embedding southwestward in the PBL, which intensified the horizontal wind shear and the positive vorticity column above the vortexes, baroclinicity and instability.
基金Project(51221462)supported by the National Natural Science Foundation of China for Innovative Research GroupProject(20120095110001)supported by the Doctoral Fund of Ministry of Education of China+1 种基金Project supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions,ChinaProject(CXJJ201303)supported by the Innovation Foundation of Xuyi Research and Development Center of Mining Equipment and Materials,China University of Mining and Technology,China
文摘A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.
文摘In order to make a rational prediction of the Dead Sea shape, data were prepared for suitability map creation using Markov Chain analysis and Multi Criteria Evaluation (MCE). Then, Markov Cellular Automata model and spatial statistics were used in prediction and validation processes. The validation process shows a standard Kappa index of 0.9545 which means a strong relation between the model and reality. The predicted shapes of years 2020, 2030 and 2040 follow the same conditions from 1984 to 2010. The predicted areas of 2020, 2030 and 2040 are 610, 591 and 574 km2 which are considered a logical extension of the trend from 1984 till 2010. This study can be used as an environmental alert in order to keep the Dead Sea alive. Moreover, Markov-Cellular Automata model can be used to predict closed seas as the Dead Sea from remote sensed data.
基金This study was supported by a grant from the Shanghai Science and Technology Commission Foundation, China(No.O14119002).
文摘BACKGROUND: In the early period of orthotopic liver transplantation (OLT), initial poor graft function (IPGF) is one of the complications which leads to primary graft non-function (PGNF) in serious cases. This study set out to establish the clinical risk factors resulting in IPGF after OLT. METHODS: Eighty cases of OLT were analyzed. The IPGF group consisted of patients with alanine aminotransferase (ALT) and/or aspartate aminotransferase (AST) above 1500 IU/L within 72 hours after OLT, while those in the non-IPGF group had values below 1500 IU/L. Recipient-associated factors before OLT analyzed were age, sex, primary liver disease and Child-Pugh classification; factors analyzed within the peri-operative period were non-heart beating time (NHBT), cold ischemia time (CIT), rewarming ischemic time (RWIT), liver biopsy at the end of cold ischemia; and factors analyzed within 72 hours after OLT were ALT and/or AST values. A logistic regression model was applied to filter the possible factors resulting in IPGF. RESULTS: Donor NHBT, CIT and RWIT were significantly longer in the IPGF group than in the non-IPGF group; in the logistic regression model, NHBT was the risk factor leading to IPGF (P < 0.05), while CIT and RWIT were possible risk factors. In one case in the IPGF group, PGNF appeared with moderate hepatic steatosis. CONCLUSIONS: Longer NHBT is an important risk factor leading to IPGF, while serious steatosis in the donor liver, CIT and RWIT are potential risk factors.
基金supported in part by the National Natural Sciences Foundation of China (NSFC) under Grant 61525103the National Natural Sciences Foundation of China under Grant 61501140the Shenzhen Fundamental Research Project under Grant JCYJ20150930150304185
文摘Dynamic spectrum access(DSA) based on cognitive radios(CR) technique is an effective approach to address the "spectrum scarcity" issue. However, traditional CR-enabled DSA system employs only single DSA strategy, which might not be suited to the dynamic network environment. In this paper, we propose a multi-strategy DSA(MS-DSA) system, where the primary and the secondary system share spectrum resources with multiple DSA strategies simultaneously. To analyze the performance of the proposed MS-DSA system, we model it as a continuous-time Markov chain(CTMC) and derive the expressions to compute the corresponding performance metrics. Based on this, we define a utility function involving the concerns of effective throughput, interference quantity on primary users, and spectrum leasing cost. Two optimization schemes, named as spectrum allocation and false alarm probability selection, are proposed to maximize the utility function. Finally, numerical simulations are provided to validate our analysis and demonstrate that the performance can be significantly improved caused by virtues of the proposed MS-DSA system.
文摘The multi-piece post-crown technique is more effective in restoring residual root than other restoration techniques.Various types of adhesives have different material properties that affect restoration.Therefore,the choice of adhesive is particularly important for patients.However,the effect of different kinds of adhesives was not too precise by experimental methods when concerning about individual differences of teeth.One tooth root can only be restored with one type of adhesive in experiment.After the mechanical test,this tooth root cannot be restored with other adhesives.With the help of medical imaging technology,reverse engineering and finite element analysis,a molar model can be reconstructed precisely and restored using different types of adhesives.The same occlusal and chewing loads were exerted on the same restored residual root models with different types of adhesives separately.Results of von Mises stress analysis showed that the adhesives with low Young’s modulus can protect the root canal effectively.However,a root canal concentration is apparently produced around the root canal orifice when chewing.Adhesives with large Young’s modulus can buffer the stress concentration of the root canal orifice.However,the root canal tissue may be destroyed because the adhesive is too hard to buffer the load.
文摘The aluminum alloy parts used in airbag of car were studied with flow control forming(FCF) method, which was a good way to low forming force and better mechanical properties. The key technology of FCF was the design of control chamber to divide metal flow. So, the design method of FCF was analyzed and two type of control chamber were put forward. According to divisional principle, calculation model of forming force and approximate formula were given. Then forming process of aluminum alloy multi-layer cylinder parts was simulated. The effect of friction factor, die radius and punch velocity on metal flow and forming force was obtained. Finally, the experiment was preformed under the direction of theory and finite element(FE) simulation results. And the qualified parts were manufactured. The simulation data and experimental results show that the forming sequence of inner wall and outer wall, and then the force step, can be controlled by adjusting the process parameters. And the FCF technology proposed has very important application value in precision forging.
文摘Natural resources management is indispensable in ensuring environmental sustainability and reducing the risk associated with climate change and increasing demand for ecological goods and services. Natural resources planners need to have at their disposal tools that can objectively help in prioritizing land use allocation. Traditional application of land use change model based on economic model, trend analysis, and or scenario analysis present some challenges of data availability and reliability necessary for implementation of the models. However, with the advent of information technology, GIS and remote sensing, biophysical data known for having influence on land use allocation can easily be accessed. The current study explores the application of GIS-Multi-criteria analysis in modeling future land use scenarios for resources planning and management using easy to construct biophysical parameters known for influencing future land use allocation. The decision problems in this study are to find the best spatial allocation of land to future agriculture and forest development, which are considered to present critical land use change in the study area. The afforestation scenarios are meant to offset the pressure on the native forest resources due to the increased demand for fuel and timber and also to contribute to the environmental protection and the agricultural land use scenarios are meant to increase productivity and ensure environmental protection. The land use scenarios did not consider “when” in the future the land use pattern may develop. The analyses of scenarios indicate that afforestation extent in the basin can be increased from 4.6% to 42.9% of the total basin area. However, the afforestation extent of 42.9% may be considered unrealistic, since in practice, it may not be possible to realize up to 42.9% afforestation, nevertheless, the spatial pattern of the afforestation may provide crucial insight into spatial afforestation policies and it future consequences. The agricultural land use can increase from 6.2% to 53.7% of the basin area. The agricultural land use expansion can be realised since the expansion of farm land is primarily the main option to achieve food production increase in the near future. The findings indicate potential use of the methodology in land use planning.
基金supported by Graduate School of National University of Defense Technology, China
文摘Components of electromechanical systems usually contain multiple performance parameters and degrade over time. In previous studies, the reliability of these electromechanical systems was analyzed by the traditional method, and the system reliability was estimated based on the reliability of components and the structures of the systems. The system reliability estimated by the traditional method could not reflect the performance of the systems. A new method is proposed in this paper to analyze the system reliability according to the data of multiple performance degraded processes of components. The performance distribution of a degraded component is obtained by the performance degradation analysis, and then states of the component are defined and corresponding state probabilities are estimated. The universal generating function method is proposed and extended to compute the performance distribution and reliability of the system based on the performances of components. A numerical example illustrates the proposed method. The results of the example show that the proposed method can relate the performance of the system to the performances of components and absolutely reflect the relationship between reliability and performance. Compared with the exact values of the system reliability, the results obtained by the proposed method is almost the same with the exact values, and the results obtained by the traditional method are conservative. The proposed method overcomes the shortcomings of the traditional method and provides a new approach to analyze the reliability of electromechanical systems with degraded components containing multiple performance parameters.
文摘A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.
