In order to investigate a gradient nano/micro-structured surface layer on pure copper produced by severe plasticity roller burnishing （SPRB） and grain refinement mechanism, the microstructure characteristics and mat...In order to investigate a gradient nano/micro-structured surface layer on pure copper produced by severe plasticity roller burnishing （SPRB） and grain refinement mechanism, the microstructure characteristics and material properties of sample at various depths from the topmost surface were investigated by SEM, TEM, XRD, OM etc. The experimental results show that the gradient nano/micro-structure was introduced into the surface layer of over 100μm in thickness. The remarkable increase in hardness near the topmost surface was mainly attributed to the reduced grain size. The equiaxed nano-sized grains were in random orientation and the most of their boundaries were low-angle grain boundaries （LAGBs）. The coarse grains are refined into the few micro-sized grains by dislocation activities;deformation twinning was found to be the primary form for the formation of submicron grains;the formation of nanostructure was dominated by dislocation activities accompanied with rotation of grains in local region.展开更多
A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing（SON） structure was quantitatively investigated. We empl...A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing（SON） structure was quantitatively investigated. We employ a diffuse interface model that incorporates the mechanism of surface diffusion. The mechanism of the fabrication is systematically integrated for high reliability of computational analysis. A semi-implicit Fourier spectral scheme is applied for high efficiency and numerical stability. Moreover, the theoretical analysis provides the guidance that is ordered by the fundamental geometrical design parameters to guide different fabrications of SON structures. The performed simulations suggest a substantial potential of the presented model for a reliable design technology of nano/micro-fabrications.展开更多
Adopting a nano-and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical...Adopting a nano-and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical energy stor-age devices at all technology readiness levels.Due to various challenging issues,especially limited stability,nano-and micro-structured(NMS)electrodes undergo fast electrochemical performance degradation.The emerging NMS scaffold design is a pivotal aspect of many electrodes as it endows them with both robustness and electrochemical performance enhancement,even though it only occupies comple-mentary and facilitating components for the main mechanism.However,extensive efforts are urgently needed toward optimizing the stereoscopic geometrical design of NMS scaffolds to minimize the volume ratio and maximize their functionality to fulfill the ever-increasing dependency and desire for energy power source supplies.This review will aim at highlighting these NMS scaffold design strategies,summariz-ing their corresponding strengths and challenges,and thereby outlining the potential solutions to resolve these challenges,design principles,and key perspectives for future research in this field.Therefore,this review will be one of the earliest reviews from this viewpoint.展开更多
Nanolipid carriers and traditional emulsion containing chemical sunscreens were prepared using emulsification combined with ultrasonic technology.The nanolipid carriers showed superior performance in sunscreen encapsu...Nanolipid carriers and traditional emulsion containing chemical sunscreens were prepared using emulsification combined with ultrasonic technology.The nanolipid carriers showed superior performance in sunscreen encapsulation,slow release and skin impermeability,and provided an excellent nanolipid slow-release encapsulation system for sunscreens.As observed by transmission electron microscopy,the nanolipid carriers were spherical shape,with smooth surface and uniform distribution,and the particle sizes were mainly concentrated in the range of 230 to 250 nm without agglomeration.The nanolipid carriers significantly improved the sunscreen performance through the synergistic effect of scattering and chemical absorption,and showed better UV stability than traditional sunscreen,indicating their photoprotective function.In vitro release experiments showed that the nano-lipidic carriers exhibited better release control when loaded with octyl methoxycinnamate(OMC)and butylmethoxydibenzoylmethane(BDFM)sunscreens than traditional traditional emulsions,with the cumulative release rate of OMC in the nano-lipidic carriers decreasing by 17.17% to 30.24% within 12 hours,and that of BDFM decreasing by 26.67% to 44.67%.26.67% to 44.16%.The results of the in vitro permeation experiment further confirmed that the nanolipid carriers could effectively encapsulate the sunscreens and prevent them from penetrating the skin barrier,thus reducing the skin irritation.Compared with traditional traditional emulsion,the cumulative penetration of OMC in nanostructured lipid carriers was 2.24μg/cm^(2)in 4 hours,while the cumulative penetration was reduced by 68.05%.The cumulative penetration of BDFM in the nanostructured lipid carrier was 3.24μg/cm^(2),with a 64.04%reduction in cumulative penetration.展开更多
This experimental study assesses the effectiveness of traditional and nano-materials in enhancing the physical and mechanical properties of deteriorated sandstone from Ramesses III Temple, Karnak, Luxor, Egypt. Treatm...This experimental study assesses the effectiveness of traditional and nano-materials in enhancing the physical and mechanical properties of deteriorated sandstone from Ramesses III Temple, Karnak, Luxor, Egypt. Treatments included Nano Estel (5%), Paraloid B-72 (3%), Paraloid B-72/Nano Estel (3%/5%), and ethyl silicates. Treated samples underwent Scanning Electron Microscopy (SEM) and physical/mechanical testing. Results show that Paraloid B-72/Nano Estel (3%/5%) yielded optimal consolidation, significantly improving sandstone’s physical and mechanical properties.展开更多
Solid-state batteries(SSBs) with high safety are promising for the energy fields,but the development has long been limited by machinability and interfacial problems.Hence,self-supporting,flexible Nano LLZO CSEs are pr...Solid-state batteries(SSBs) with high safety are promising for the energy fields,but the development has long been limited by machinability and interfacial problems.Hence,self-supporting,flexible Nano LLZO CSEs are prepared with a solvent-free method at 25℃.The 99.8 wt% contents of Nano LLZO particles enable the Nano LLZO CSEs to maintain good thermal stability while exhibiting a wide electrochemical window of 5.0 V and a high Li~+ transfer number of 0.8.The mean modulus reaches 4376 MPa.Benefiting from the interfacial modulation,the Li|Li symmetric batteries based on the Nano LLZO CSEs show benign stability with lithium at the current densities of 0.1 mA cm^(-2),0.2 mA cm^(-2),and 0.5 mA cm^(-2).In addition,the Li|LiFePO_(4)(LFP) SSBs achieve favorable cycling performance:the specific capacity reaches128.1 mAh g^(-1) at 0.5 C rate,with a capacity retention of about 80% after 600 cycles.In the further tests of the LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) cathodes with higher energy density,the Nano LLZO CSEs also demonstrate good compatibility:the specific capacities of NCM811-based SSBs reach 177.9 mAh g^(-1) at 0.5 C rate,while the capacity retention is over 96% after 150 cycles.Furthermore,the Li|LFP soft-pack SSBs verify the safety characteristics and the potential for application,which have a desirable prospect.展开更多
Copper indium disulfide（CuInS2） nano-particles were synthesized by solvothermal method at 150 ℃ using copper（？） chloride,indium（Ш） chloride,thiourea and ethanol as raw materials,and characterized by X-ray dif...Copper indium disulfide（CuInS2） nano-particles were synthesized by solvothermal method at 150 ℃ using copper（？） chloride,indium（Ш） chloride,thiourea and ethanol as raw materials,and characterized by X-ray diffraction（XRD）,field-emission scanning electron microscope（FESEM）,and UV-Vis spectra.The effects of pH value on its micro-structures and optical properties were investigated.The results show that,with the pH value increasing,the particle size of the nano-crystalline CuInS2 increases,and its band gap becomes narrower under alkaline condition.The band gaps of CuInS2 nano-particles are from 1.52 eV to 1.93 eV,which makes them promising candidates as absorber materials for photovoltaic applications.展开更多
Nowadays,the superior detection performance of semiconductor neutron detectors is a challenging task.In this paper,we deal with a novel GaN micro-structured neutron detector(GaN-MSND)and compare three different method...Nowadays,the superior detection performance of semiconductor neutron detectors is a challenging task.In this paper,we deal with a novel GaN micro-structured neutron detector(GaN-MSND)and compare three different methods such as the method of modulating the trench depth,the method of introducing dielectric layer and p-type inversion region to improve the width of depletion region(W).It is observed that the intensity of electric field can be modulated by scaling the trench depth.On the other hand,the electron blocking region is formed in the detector enveloped with a dielectric layer.Furthermore,the introducing of p-type inversion region produces new p/n junction,which not only promotes the further expansion of the depletion region but also reduces the intensity of electric field produced by main junction.It can be realized that all these methods can considerably enhance the working voltage as well as W.Of them,the improvement on W of GaN-MSND with the p-type inversion region is the most significant and the value of W could reach 12.8μm when the carrier concentration of p-type inversion region is 10^17 cm^-3.Consequently,the value of W is observed to improve 200%for the designed GaN-MSND as compared with that without additional design.This work ensures to the researchers and scientific community the fabrication of GaN-MSND having superior detection limit in the field of intense radiation.展开更多
In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve ...In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve the process problems in the masking procedure,the swelling problemof the first layer of SU-8 thick photoresist was studied experimentally.The 5μmline-width compensation and closed 20μmand 30μmisolation strips were designed and fabricated around the micro-structure pattern.The pore problemin the Ni micro-electroforming layer was analyzed and the electroforming parameters were improved.The pH value of the electroforming solution should be controlled between 3.8 and 4.4 and the current density should be below 3 A/dm^2.To solve the problems of high inner stress and incomplete development of the micro-cylinder hole array with a diameter of 30μm,the lithography process was optimized.The pre-baking temperature was increased via gradient heating and rose every 5℃ from 65℃ to 85℃ and then remained at 85℃ for 50 min–1 h.In addition,the full contact exposure was used.Finally,a multi-layer metal micro-structure with high precision and good quality of microelectroforming layer was fabricated using UV-LIGA overlay technology.展开更多
A low-power CO_2 laser is used to deposit Fe powder and mixture of Fe andcarbon powder on substrates respectively, and the macro and micro-structure of the formed samplesare investigated. It is demonstrated that most ...A low-power CO_2 laser is used to deposit Fe powder and mixture of Fe andcarbon powder on substrates respectively, and the macro and micro-structure of the formed samplesare investigated. It is demonstrated that most grains of these samples are equi-axed. This isderived from the high nucleation velocity in the shallow melt pool besides rapid solidification ofthe liquid-state alloy or metal. Bainitic structure, combination of pearlite and ferrite structureand ferrite structure are seen respectively in the samples involving various amounts of carbon owingto no martensitic transformation in these small samples.展开更多
Ni-rich layered material is a kind of high-capacity cathode to meet the requirement of electric vehicles.As for the typical LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) material,the particle formation is significant for electroche...Ni-rich layered material is a kind of high-capacity cathode to meet the requirement of electric vehicles.As for the typical LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) material,the particle formation is significant for electrochemical properties of the cathode.In this work,the structure,morphology,and electrochemical performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) secondary particles and single crystals were systematically studied.A lower Ni^(2+)/Ni^(3+)molar ratio of 0.66 and a lower residual alkali content of 0.228wt%were achieved on the surface of the single crystals.In addition,the single crystals showed a discharge capacity of 191.6 mAh/g at 0.2 C(~12 mAh/g lower than that of the secondary particles)and enhanced the electrochemical stability,especially when cycled at 50℃ and in a wider electrochemical window(between 3.0 and 4.4 V vs.Li+/Li).The LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) secondary particles were suitable for applications requiring high specific capacity,whereas single crystals exhibited better stability,indicating that they are more suitable for use in long life requested devices.展开更多
To obtain the form error of micro-structured surfaces robustly and accurately, a form er- ror evaluation method was developed based on the real coded genetic algorithm （RCGA）. The meth- od employed the average squar...To obtain the form error of micro-structured surfaces robustly and accurately, a form er- ror evaluation method was developed based on the real coded genetic algorithm （RCGA）. The meth- od employed the average squared distance as the matching criterion. The point to surface distance was achieved by use of iterative method and the modeling of RCGA for the surface matching was also presented in detail. Parameter selection for RCGA including the crossover rate and population size was discussed. Evaluation results of series simulated surfaces without form error show that this method can achieve the accuracy of root mean square deviation （ Sq ） less than 1 nm and surface pro- file error （ St ） less than 4 nm. Evaluation of the surfaces with different simulated errors illustrates that the proposed method can also robustly obtain the form error with nano-meter precision. The e- valuation of actual measured surfaces further indicates that the proposed method is capable of pre- cisely evaluating micro-structured surfaces.展开更多
基金Project(50975095)supported by the National Natural Science Foundation of ChinaProject(2012ZM0048)supported by the Fundamental Research Funds for the Central Universities,China
文摘In order to investigate a gradient nano/micro-structured surface layer on pure copper produced by severe plasticity roller burnishing （SPRB） and grain refinement mechanism, the microstructure characteristics and material properties of sample at various depths from the topmost surface were investigated by SEM, TEM, XRD, OM etc. The experimental results show that the gradient nano/micro-structure was introduced into the surface layer of over 100μm in thickness. The remarkable increase in hardness near the topmost surface was mainly attributed to the reduced grain size. The equiaxed nano-sized grains were in random orientation and the most of their boundaries were low-angle grain boundaries （LAGBs）. The coarse grains are refined into the few micro-sized grains by dislocation activities;deformation twinning was found to be the primary form for the formation of submicron grains;the formation of nanostructure was dominated by dislocation activities accompanied with rotation of grains in local region.
基金the National Natural Science Foundation of China(No.51775154)the ZheJiang Provincial Natural Science Foundation of China(No.LZ15E050004)
文摘A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing（SON） structure was quantitatively investigated. We employ a diffuse interface model that incorporates the mechanism of surface diffusion. The mechanism of the fabrication is systematically integrated for high reliability of computational analysis. A semi-implicit Fourier spectral scheme is applied for high efficiency and numerical stability. Moreover, the theoretical analysis provides the guidance that is ordered by the fundamental geometrical design parameters to guide different fabrications of SON structures. The performed simulations suggest a substantial potential of the presented model for a reliable design technology of nano/micro-fabrications.
基金The authors acknowledge support from the German Research Foundation(DFG:LE 2249/5-1)the Sino-German Center for Research Promotion(GZ1579)+1 种基金Yunnan Fundamental Research Projects(202201AW070014)Jiajia Qiu and Yu Duan appreciate support from the China Scholarship Council(No.201908530218&202206990027).
文摘Adopting a nano-and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical energy stor-age devices at all technology readiness levels.Due to various challenging issues,especially limited stability,nano-and micro-structured(NMS)electrodes undergo fast electrochemical performance degradation.The emerging NMS scaffold design is a pivotal aspect of many electrodes as it endows them with both robustness and electrochemical performance enhancement,even though it only occupies comple-mentary and facilitating components for the main mechanism.However,extensive efforts are urgently needed toward optimizing the stereoscopic geometrical design of NMS scaffolds to minimize the volume ratio and maximize their functionality to fulfill the ever-increasing dependency and desire for energy power source supplies.This review will aim at highlighting these NMS scaffold design strategies,summariz-ing their corresponding strengths and challenges,and thereby outlining the potential solutions to resolve these challenges,design principles,and key perspectives for future research in this field.Therefore,this review will be one of the earliest reviews from this viewpoint.
文摘Nanolipid carriers and traditional emulsion containing chemical sunscreens were prepared using emulsification combined with ultrasonic technology.The nanolipid carriers showed superior performance in sunscreen encapsulation,slow release and skin impermeability,and provided an excellent nanolipid slow-release encapsulation system for sunscreens.As observed by transmission electron microscopy,the nanolipid carriers were spherical shape,with smooth surface and uniform distribution,and the particle sizes were mainly concentrated in the range of 230 to 250 nm without agglomeration.The nanolipid carriers significantly improved the sunscreen performance through the synergistic effect of scattering and chemical absorption,and showed better UV stability than traditional sunscreen,indicating their photoprotective function.In vitro release experiments showed that the nano-lipidic carriers exhibited better release control when loaded with octyl methoxycinnamate(OMC)and butylmethoxydibenzoylmethane(BDFM)sunscreens than traditional traditional emulsions,with the cumulative release rate of OMC in the nano-lipidic carriers decreasing by 17.17% to 30.24% within 12 hours,and that of BDFM decreasing by 26.67% to 44.67%.26.67% to 44.16%.The results of the in vitro permeation experiment further confirmed that the nanolipid carriers could effectively encapsulate the sunscreens and prevent them from penetrating the skin barrier,thus reducing the skin irritation.Compared with traditional traditional emulsion,the cumulative penetration of OMC in nanostructured lipid carriers was 2.24μg/cm^(2)in 4 hours,while the cumulative penetration was reduced by 68.05%.The cumulative penetration of BDFM in the nanostructured lipid carrier was 3.24μg/cm^(2),with a 64.04%reduction in cumulative penetration.
文摘This experimental study assesses the effectiveness of traditional and nano-materials in enhancing the physical and mechanical properties of deteriorated sandstone from Ramesses III Temple, Karnak, Luxor, Egypt. Treatments included Nano Estel (5%), Paraloid B-72 (3%), Paraloid B-72/Nano Estel (3%/5%), and ethyl silicates. Treated samples underwent Scanning Electron Microscopy (SEM) and physical/mechanical testing. Results show that Paraloid B-72/Nano Estel (3%/5%) yielded optimal consolidation, significantly improving sandstone’s physical and mechanical properties.
基金supported by Science and Technology Project of China Southern Power Grid (SZKJXM20230049/090000KC23010038)。
文摘Solid-state batteries(SSBs) with high safety are promising for the energy fields,but the development has long been limited by machinability and interfacial problems.Hence,self-supporting,flexible Nano LLZO CSEs are prepared with a solvent-free method at 25℃.The 99.8 wt% contents of Nano LLZO particles enable the Nano LLZO CSEs to maintain good thermal stability while exhibiting a wide electrochemical window of 5.0 V and a high Li~+ transfer number of 0.8.The mean modulus reaches 4376 MPa.Benefiting from the interfacial modulation,the Li|Li symmetric batteries based on the Nano LLZO CSEs show benign stability with lithium at the current densities of 0.1 mA cm^(-2),0.2 mA cm^(-2),and 0.5 mA cm^(-2).In addition,the Li|LiFePO_(4)(LFP) SSBs achieve favorable cycling performance:the specific capacity reaches128.1 mAh g^(-1) at 0.5 C rate,with a capacity retention of about 80% after 600 cycles.In the further tests of the LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) cathodes with higher energy density,the Nano LLZO CSEs also demonstrate good compatibility:the specific capacities of NCM811-based SSBs reach 177.9 mAh g^(-1) at 0.5 C rate,while the capacity retention is over 96% after 150 cycles.Furthermore,the Li|LFP soft-pack SSBs verify the safety characteristics and the potential for application,which have a desirable prospect.
基金Funded by the 973 Project (No. 2009CB939704)the Program for Changjiang Scholars and Innovative Research Team in University (No.IRT0547)
文摘Copper indium disulfide（CuInS2） nano-particles were synthesized by solvothermal method at 150 ℃ using copper（？） chloride,indium（Ш） chloride,thiourea and ethanol as raw materials,and characterized by X-ray diffraction（XRD）,field-emission scanning electron microscope（FESEM）,and UV-Vis spectra.The effects of pH value on its micro-structures and optical properties were investigated.The results show that,with the pH value increasing,the particle size of the nano-crystalline CuInS2 increases,and its band gap becomes narrower under alkaline condition.The band gaps of CuInS2 nano-particles are from 1.52 eV to 1.93 eV,which makes them promising candidates as absorber materials for photovoltaic applications.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11675198,11875097,11975257,61774072,61574026,and 61971090)the National Key Research and Development Program of China(Grant Nos.2016YFB0400600 and2016YFB0400601)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.DUT19LK45)the China Postdoctoral Science Foundation(Grant No.2016M591434)the Science and Technology Plan of Dalian City,China(Grant No.2018J12GX060).
文摘Nowadays,the superior detection performance of semiconductor neutron detectors is a challenging task.In this paper,we deal with a novel GaN micro-structured neutron detector(GaN-MSND)and compare three different methods such as the method of modulating the trench depth,the method of introducing dielectric layer and p-type inversion region to improve the width of depletion region(W).It is observed that the intensity of electric field can be modulated by scaling the trench depth.On the other hand,the electron blocking region is formed in the detector enveloped with a dielectric layer.Furthermore,the introducing of p-type inversion region produces new p/n junction,which not only promotes the further expansion of the depletion region but also reduces the intensity of electric field produced by main junction.It can be realized that all these methods can considerably enhance the working voltage as well as W.Of them,the improvement on W of GaN-MSND with the p-type inversion region is the most significant and the value of W could reach 12.8μm when the carrier concentration of p-type inversion region is 10^17 cm^-3.Consequently,the value of W is observed to improve 200%for the designed GaN-MSND as compared with that without additional design.This work ensures to the researchers and scientific community the fabrication of GaN-MSND having superior detection limit in the field of intense radiation.
文摘In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve the process problems in the masking procedure,the swelling problemof the first layer of SU-8 thick photoresist was studied experimentally.The 5μmline-width compensation and closed 20μmand 30μmisolation strips were designed and fabricated around the micro-structure pattern.The pore problemin the Ni micro-electroforming layer was analyzed and the electroforming parameters were improved.The pH value of the electroforming solution should be controlled between 3.8 and 4.4 and the current density should be below 3 A/dm^2.To solve the problems of high inner stress and incomplete development of the micro-cylinder hole array with a diameter of 30μm,the lithography process was optimized.The pre-baking temperature was increased via gradient heating and rose every 5℃ from 65℃ to 85℃ and then remained at 85℃ for 50 min–1 h.In addition,the full contact exposure was used.Finally,a multi-layer metal micro-structure with high precision and good quality of microelectroforming layer was fabricated using UV-LIGA overlay technology.
文摘A low-power CO_2 laser is used to deposit Fe powder and mixture of Fe andcarbon powder on substrates respectively, and the macro and micro-structure of the formed samplesare investigated. It is demonstrated that most grains of these samples are equi-axed. This isderived from the high nucleation velocity in the shallow melt pool besides rapid solidification ofthe liquid-state alloy or metal. Bainitic structure, combination of pearlite and ferrite structureand ferrite structure are seen respectively in the samples involving various amounts of carbon owingto no martensitic transformation in these small samples.
基金This work was financially supported by the National Natural Science Foundation of China(No.21706292)Hunan Provincial Science and Technology Plan Project,China(No.2016TP1007)+1 种基金Hunan Provincial Natural Science Foundation of China(No.2020JJ4107)Kai Han acknowledges the support from Innovation-Driven Project of Central South University(No.2020CX037).
文摘Ni-rich layered material is a kind of high-capacity cathode to meet the requirement of electric vehicles.As for the typical LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) material,the particle formation is significant for electrochemical properties of the cathode.In this work,the structure,morphology,and electrochemical performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) secondary particles and single crystals were systematically studied.A lower Ni^(2+)/Ni^(3+)molar ratio of 0.66 and a lower residual alkali content of 0.228wt%were achieved on the surface of the single crystals.In addition,the single crystals showed a discharge capacity of 191.6 mAh/g at 0.2 C(~12 mAh/g lower than that of the secondary particles)and enhanced the electrochemical stability,especially when cycled at 50℃ and in a wider electrochemical window(between 3.0 and 4.4 V vs.Li+/Li).The LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) secondary particles were suitable for applications requiring high specific capacity,whereas single crystals exhibited better stability,indicating that they are more suitable for use in long life requested devices.
基金Supported by the Programme of Introducing Talents of Discipline to Universities (B07018)
文摘To obtain the form error of micro-structured surfaces robustly and accurately, a form er- ror evaluation method was developed based on the real coded genetic algorithm （RCGA）. The meth- od employed the average squared distance as the matching criterion. The point to surface distance was achieved by use of iterative method and the modeling of RCGA for the surface matching was also presented in detail. Parameter selection for RCGA including the crossover rate and population size was discussed. Evaluation results of series simulated surfaces without form error show that this method can achieve the accuracy of root mean square deviation （ Sq ） less than 1 nm and surface pro- file error （ St ） less than 4 nm. Evaluation of the surfaces with different simulated errors illustrates that the proposed method can also robustly obtain the form error with nano-meter precision. The e- valuation of actual measured surfaces further indicates that the proposed method is capable of pre- cisely evaluating micro-structured surfaces.
