Based on a full vector-diffraction theory, a detailed theoretical study is carried out, aiming at providing a clear insight into the effects of different focusing and off-axis parabola parameters on far-field vector-d...Based on a full vector-diffraction theory, a detailed theoretical study is carried out, aiming at providing a clear insight into the effects of different focusing and off-axis parabola parameters on far-field vector-diffraction properties of an offaxis parabolic mirror in the presence of misalignments of the incoming beam. The physical origin of these effects is also explored. The results show that the far-field intensity profile is altered by the distortion-, coma-, and astigmatism-like aberrations, which are caused by oblique incidence rather than inherent aberrations for the off-axis configuration. The radius of 90% encircled energy also increases but does not change monotonically with incident beam size increasing, or rather,it first decreases and then increases. The focal shift strongly depends on the effective focal length and oblique incidence angle, but it is almost independent of the beam size, which affects the focusing spot patterns. The intensity distribution produces a higher astigmatic image with off-axis angle increasing. Coma-like aberration starts to become dominant with beam size increasing and results in larger curved propagation trajectory. The incident polarization also affects the intensity distribution. The variation in the Strehl ratio with oblique incidence angle strongly depends on the misalignment direction and beam size as well. In addition, we find that the difference in locus between the catacaustic and the diffraction focus in the meridian is small. But the locus of the sagittal foci is obviously different from the locus of the meridian foci and the catacaustic focus. Moreover, the peak intensity of the sagittal focus is maximum, and the ratio of the peak intensity to that in the meridian plane is approximately 1.5. Understanding these effects is valuable for assessing a practical focused intensity and describing the motion of charged particles under a strong electric field in ultraintense laser–matter interaction.展开更多
Shown is a possibility to make the image of a laser beam over a distance of 2.5 m, formed by the spherical multi-segment mirror installed in LHD, twice sharper by suitably adjusting the inclination of each segment mir...Shown is a possibility to make the image of a laser beam over a distance of 2.5 m, formed by the spherical multi-segment mirror installed in LHD, twice sharper by suitably adjusting the inclination of each segment mirror, which is equivalent to making the mirror surface aspherical. This will further enhance the attractiveness of a mirror-based Thomson scattering system.展开更多
Large aspheric mirrors are needed for the remote sensing and ground based telescope optical systems,these mirrors are made of hard and brittle materials which require ultra-precision grinding process to guarantee the ...Large aspheric mirrors are needed for the remote sensing and ground based telescope optical systems,these mirrors are made of hard and brittle materials which require ultra-precision grinding process to guarantee the high profile accuracy and machining efficiency. The ultra-precision aspheric CNC grinding machine( UAG900) is presented by this paper,as well as its grinding capability. The hydrostatic bearings of high accuracy and stiffness are adopted by the linear and rotary motions to guarantee the mirror accuracy,material removal rate and subsurface damage. Disk type grinding wheel with arc edge is used. The material removal rate can be up to 360 mm3/ min to guarantee the machining efficiency during rough grinding using D180 diamond grinding wheel while the fine grinding is performed using D15 grinding wheel. It indicates that the grinding wheel radius measuring error is proportional to the profile error induced by the grinding path. The grinding step size is better to be 0. 01 mm for the reduction of the grinding movement accelerations and program length. The grinding path is planned and expressed based on the grinding mode according to the mirror shape. One540 mm×450 mm× 100 mm zerodur mirror is ground and re-ground using the measuring data acquired by the Leitz CMM. The final surface accuracy of P-V value is less than 5 μm after compensation grinding.展开更多
Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is u...Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is used to model ideal aspheric wavefront. Reflective Fresnel zones located in a ring area concentric to the CGH structure is designed to reduce or eliminate alignment errors. Substrate figure error, pattern distortion, etching and duty cycle variations that influence the reconstructed wavefront are quantitatively analyzed in theory and corresponding error equations are obtained to guide the tolerance distribution during CGH fabricating. A design example is given and the uncertainty of t achieves λ20.展开更多
A study of the structure of the electric and magnetic fields of ultraintense laser pulses focused by an off-axis parabolic mirror is reported. At first, a theoretical model is laid out, whose final equations integrati...A study of the structure of the electric and magnetic fields of ultraintense laser pulses focused by an off-axis parabolic mirror is reported. At first, a theoretical model is laid out, whose final equations integration allows the space and time structure of the fields to be retrieved. The model is then employed to investigate the field patterns at different times within the optical cycle, for off-axis parabola parameters normally employed in the context of ultraintense laser–plasma interaction experiments. The results show that nontrivial, complex electromagnetic field patterns are observed at the time at which the electric and magnetic fields are supposed to vanish. The importance of this effect is then studied for different laser polarizations, f numbers and off-axis angles.展开更多
We demonstrate a configuration optimization process of an off-axis parabolic mirror to maximize the focused peak intensity based on a precise knowledge of the tight focusing properties by using a full vector-diffracti...We demonstrate a configuration optimization process of an off-axis parabolic mirror to maximize the focused peak intensity based on a precise knowledge of the tight focusing properties by using a full vector-diffraction theory and obtain an optimum configuration scaling rule, which makes it possible to achieve the maximum peak intensity. In addition, we also carry out an assessment analysis of the offset and off-axis angle tolerances corresponding to a 5% drop of the maximum focused peak intensity and present scaling laws for the tolerances of the offset and off-axis angle. Understanding these scaling laws is important to enhance the focusability of a laser beam by an off-axis parabolic mirror in the optimum configuration, in particular, which is valuable for structural design and selection of an off-axis parabolic mirror in ultrashort and ultraintense laser–matter interaction experiments.展开更多
基金Project supported by the Science Foundation for Youth Scholars of Minjiang University,China(Grant No.Mj9n201602)the National Science and Technology Major Project of the Ministry of Science and Technology of China。
文摘Based on a full vector-diffraction theory, a detailed theoretical study is carried out, aiming at providing a clear insight into the effects of different focusing and off-axis parabola parameters on far-field vector-diffraction properties of an offaxis parabolic mirror in the presence of misalignments of the incoming beam. The physical origin of these effects is also explored. The results show that the far-field intensity profile is altered by the distortion-, coma-, and astigmatism-like aberrations, which are caused by oblique incidence rather than inherent aberrations for the off-axis configuration. The radius of 90% encircled energy also increases but does not change monotonically with incident beam size increasing, or rather,it first decreases and then increases. The focal shift strongly depends on the effective focal length and oblique incidence angle, but it is almost independent of the beam size, which affects the focusing spot patterns. The intensity distribution produces a higher astigmatic image with off-axis angle increasing. Coma-like aberration starts to become dominant with beam size increasing and results in larger curved propagation trajectory. The incident polarization also affects the intensity distribution. The variation in the Strehl ratio with oblique incidence angle strongly depends on the misalignment direction and beam size as well. In addition, we find that the difference in locus between the catacaustic and the diffraction focus in the meridian is small. But the locus of the sagittal foci is obviously different from the locus of the meridian foci and the catacaustic focus. Moreover, the peak intensity of the sagittal focus is maximum, and the ratio of the peak intensity to that in the meridian plane is approximately 1.5. Understanding these effects is valuable for assessing a practical focused intensity and describing the motion of charged particles under a strong electric field in ultraintense laser–matter interaction.
基金supported by the LHD project(NIFS09ULHH502)by the JSPS-CAS Core-University program in the field of 'Plasma and Nuclear Fusion'
文摘Shown is a possibility to make the image of a laser beam over a distance of 2.5 m, formed by the spherical multi-segment mirror installed in LHD, twice sharper by suitably adjusting the inclination of each segment mirror, which is equivalent to making the mirror surface aspherical. This will further enhance the attractiveness of a mirror-based Thomson scattering system.
基金Sponsored by the National High Technology Research and Development Program(Grant No.2008AA042503)the National Science and Technology Major Project(Grant No.2013ZX04006011-201)
文摘Large aspheric mirrors are needed for the remote sensing and ground based telescope optical systems,these mirrors are made of hard and brittle materials which require ultra-precision grinding process to guarantee the high profile accuracy and machining efficiency. The ultra-precision aspheric CNC grinding machine( UAG900) is presented by this paper,as well as its grinding capability. The hydrostatic bearings of high accuracy and stiffness are adopted by the linear and rotary motions to guarantee the mirror accuracy,material removal rate and subsurface damage. Disk type grinding wheel with arc edge is used. The material removal rate can be up to 360 mm3/ min to guarantee the machining efficiency during rough grinding using D180 diamond grinding wheel while the fine grinding is performed using D15 grinding wheel. It indicates that the grinding wheel radius measuring error is proportional to the profile error induced by the grinding path. The grinding step size is better to be 0. 01 mm for the reduction of the grinding movement accelerations and program length. The grinding path is planned and expressed based on the grinding mode according to the mirror shape. One540 mm×450 mm× 100 mm zerodur mirror is ground and re-ground using the measuring data acquired by the Leitz CMM. The final surface accuracy of P-V value is less than 5 μm after compensation grinding.
基金the Ministerial Level Foundation (4645103030401)
文摘Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is used to model ideal aspheric wavefront. Reflective Fresnel zones located in a ring area concentric to the CGH structure is designed to reduce or eliminate alignment errors. Substrate figure error, pattern distortion, etching and duty cycle variations that influence the reconstructed wavefront are quantitatively analyzed in theory and corresponding error equations are obtained to guide the tolerance distribution during CGH fabricating. A design example is given and the uncertainty of t achieves λ20.
基金support from the EU’s Horizon 2020 research and innovation programme through the project ‘EuPRAXIA’(grant agreement No.653782)from the Italian Ministry of Education,University and Research(MIUR)through the PRIN project‘Preclinical Tool for Advanced Translational Research with Ultrashort and Ultraintense xray Pulses’(prot.20154F48P9)from the MIUR through the research network funding ELI-Italy(‘Attoseconds’)
文摘A study of the structure of the electric and magnetic fields of ultraintense laser pulses focused by an off-axis parabolic mirror is reported. At first, a theoretical model is laid out, whose final equations integration allows the space and time structure of the fields to be retrieved. The model is then employed to investigate the field patterns at different times within the optical cycle, for off-axis parabola parameters normally employed in the context of ultraintense laser–plasma interaction experiments. The results show that nontrivial, complex electromagnetic field patterns are observed at the time at which the electric and magnetic fields are supposed to vanish. The importance of this effect is then studied for different laser polarizations, f numbers and off-axis angles.
基金supported by the Science Foundation for the Youth Scholars of Minjiang University (No. Mj9n201602)the National Science and Technology Major Project of the Ministry of Science and Technology of China。
文摘We demonstrate a configuration optimization process of an off-axis parabolic mirror to maximize the focused peak intensity based on a precise knowledge of the tight focusing properties by using a full vector-diffraction theory and obtain an optimum configuration scaling rule, which makes it possible to achieve the maximum peak intensity. In addition, we also carry out an assessment analysis of the offset and off-axis angle tolerances corresponding to a 5% drop of the maximum focused peak intensity and present scaling laws for the tolerances of the offset and off-axis angle. Understanding these scaling laws is important to enhance the focusability of a laser beam by an off-axis parabolic mirror in the optimum configuration, in particular, which is valuable for structural design and selection of an off-axis parabolic mirror in ultrashort and ultraintense laser–matter interaction experiments.
