Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3...Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3)Fe oxide/PANI)with a robust hetero-interface,which significantly improves oxygen evolution activities with an overpotential of 270 mV at 10 mA cm^(-2)and specific activity of 2.08 mA cm_(ECSA)^(-2)at overpotential of 300 mV,3.84-fold that of Ni_(3)Fe oxide.It is revealed that the catalyst–support interaction between Ni_(3)Fe oxide and PANI support enhances the Ni–O covalency via the interfacial Ni–N bond,thus promoting the charge and mass transfer on Ni_(3)Fe oxide.Considering the excellent activity and stability,rechargeable Zn-air batteries with optimum Ni_(3)Fe oxide/PANI are assembled,delivering a low charge voltage of 1.95 V to cycle for 400 h at 10 mA cm^(-2).The regulation of the effect of catalyst–support interaction on catalytic activity provides new possibilities for the future design of highly efficient OER catalysts.展开更多
Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal int...Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in AEMWEs.Herein,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work.Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER performance.More critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.展开更多
Binary composites(ZIF-67/rGO)were synthesized by one-step precipitation method using cobalt nitrate hexahydrate as metal source,2-methylimidazole as organic ligand,and reduced graphene oxide(rGO)as carbon carrier.Then...Binary composites(ZIF-67/rGO)were synthesized by one-step precipitation method using cobalt nitrate hexahydrate as metal source,2-methylimidazole as organic ligand,and reduced graphene oxide(rGO)as carbon carrier.Then Ru3+was introduced for ion exchange,and the porous Ru-doped Co_(3)O_(4)/rGO(Ru-Co_(3)O_(4)/rGO)composite electrocatalyst was prepared by annealing.The phase structure,morphology,and valence state of the catalyst were analyzed by X-ray powder diffraction(XRD),scanning electron microscope(SEM),transmission electron microscopy(TEM),and X-ray photoelectron spectroscopy(XPS).In 1 mol·L^(-1)KOH,the oxygen evolution reaction(OER)performance of the catalyst was measured by linear sweep voltammetry,cyclic voltammetry,and chronoamperometry.The results show that the combination of Ru doping and rGO provides a fast channel for collaborative electron transfer.At the same time,rGO as a carbon carrier can improve the electrical conductivity of Ru-Co_(3)O_(4)particles,and the uniformly dispersed nanoparticles enable the reactants to diffuse freely on the catalyst.The results showed that the electrochemical performance of Ru-Co_(3)O_(4)/rGO was much better than that of Co_(3)O_(4)/rGO,and the overpotential of Ru-Co_(3)O_(4)/rGO was 363.5 mV at the current density of 50 mA·cm^(-2).展开更多
High-entropy(HE)design provides ample opportunities for accessing catalysts with unique physiochemical properties for advanced energy and environmental applications.Although a variety of multi-cationic high-entropy ma...High-entropy(HE)design provides ample opportunities for accessing catalysts with unique physiochemical properties for advanced energy and environmental applications.Although a variety of multi-cationic high-entropy materials(HEMs)have been identified,HEMs consisted of multiple cationic and anionic elements are still limited.Herein,we present the design and synthesis of a series of rutile-structured high-entropy oxy fluorides(HEOFs),including[RuO_(2)]x[MgMnZnCoF_(2)]y,[MnO_(2)]_(x)[MgMnZnCoF_(2)]_(y),[MoO_(2)]_(x)[MgMnZnCoF_(2)]_(y),[SnO_(2)]_(x)[MgMnZnCoF_(2)]_(y)and[TiO_(2)]_(x)[MgMnZnCoF_(2)]_(y)(x:y=3:1,2:1,1:1).All the HEOFs are obtained through mechanochemical alloying rutile-structured oxide and fluoride precursors and the HEOFs inherit the crystal structures of the skeleton oxides.Moreover,the HEOFs exhibit enhanced electrocatalytic oxygen evolution reaction(OER)activity than the corresponding oneelement precursors.Typically,the best-performed HEOF[RuO_(2)]_(3)[MgMnZnCoF_(2)]_(1)catalyst requires an overpotential of 240 mV to achieve a current density of 10 mA cm^(-2),which is lower than RuO_(2)(291 mV),More impressively,the specific mass activity of[RuO_(2)]_(3)[MgMnZnCoF_(2)]_(1)is 537.1 A g_(Ru)^(-1)at1.55 V(vs RHE),which is ca.7.6 times that of RuO_(2)(70.5 A g_(Ru)^(-1)).The enhanced electrocata lytic OER performance obtained on[RuO_(2)]_(3)[MgMnZnCoF_(2)]_(1)is ascribed to the contribution of the different cationic and anionic elements that modulates the electronic structures of the pristine RuO_(2),which facilitates efficient OER kinetics.This work demonstrates the efficacy of high-entropy design towards approaching excellent catalysts for enhanced electrocatalysis.展开更多
Oxygen evolution reaction(OER)is often regarded as a crucial bottleneck in the field of renewable energy storage and conversion.To further accelerate the sluggish kinetics of OER,a cation and anion modulation strategy...Oxygen evolution reaction(OER)is often regarded as a crucial bottleneck in the field of renewable energy storage and conversion.To further accelerate the sluggish kinetics of OER,a cation and anion modulation strategy is reported here,which has been proven to be effective in preparing highly active electrocatalyst.For example,the cobalt,sulfur,and phosphorus modulated nickel hydroxide(denoted as NiCoPSOH)only needs an overpotential of 232 mV to reach a current density of 20 mA cm^(–2),demonstrating excellent OER performances.The cation and anion modulation facilitates the generation of high-valent Ni species,which would activate the lattice oxygen and switch the OER reaction pathway from conventional adsorbate evolution mechanism to lattice oxygen mechanism(LOM),as evidenced by the results of electrochemical measurements,Raman spectroscopy and differential electrochemical mass spectrometry.The LOM pathway of NiCoPSOH is further verified by the theoretical calculations,including the upshift of O 2p band center,the weakened Ni–O bond and the lowest energy barrier of rate-limiting step.Thus,the anion and cation modulated catalyst NiCoPSOH could effectively accelerate the sluggish OER kinetics.Our work provides a new insight into the cation and anion modulation,and broadens the possibility for the rational design of highly active electrocatalysts.展开更多
Transition metal-based nanomaterials have emerged as promising electrocatalysts for oxygen evolution reaction(OER).Considerable research efforts have shown that self-reconstruction occurs on these nanomaterials under ...Transition metal-based nanomaterials have emerged as promising electrocatalysts for oxygen evolution reaction(OER).Considerable research efforts have shown that self-reconstruction occurs on these nanomaterials under operating conditions of OER process.However,most of them undergo incomplete reconstruction with limited thickness of reconstruction layer,leading to low component utilization and arduous exploration of real catalytic mechanism.Herein,we identify the dynamic behaviors in complete reconstruction of Co-based complexes during OER.The hollow phytic acid(PA)cross-linked CoFe-based complex nanoboxes with porous nanowalls are designed because of their good electrolyte penetration and mass transport ability,in favor of the fast and complete reconstruction.A series of experiment characterizations demonstrate that the reconstruction process includes the fast substitution of PA by OH-to form Co(Fe)(OH)xand subsequent potential-driven oxidation to Co(Fe)OOH.The obtained CoFeOOH delivers a low overpotential of 290 mV at a current density of 10 mA cm^(-2)and a long-term stability.The experiment results together with theory calculations reveal that the Fe incorporation can result in the electron rearrangement of reconstructed CoFeOOH and optimization of their electronic structure,accounting for the enhanced OER activity.The work provides new insights into complete reconstruction of metal-based complexes during OER and offers guidelines for rational design of high-performance electrocatalysts.展开更多
Designing highly active and stable electrocatalysts of oxygen evolution reaction(OER)is one of the crucial challenges.In this study,a novel OER electrocatalyst,NiFe-MIL-53 modified with ultra-low rhodium(Rh@NiFe-MIL-5...Designing highly active and stable electrocatalysts of oxygen evolution reaction(OER)is one of the crucial challenges.In this study,a novel OER electrocatalyst,NiFe-MIL-53 modified with ultra-low rhodium(Rh@NiFe-MIL-53),is successfully prepared via the hydrothermal method.In-situ Raman spectroscopy and electrochemical impedance spectroscopy reveal that the doped Rh accelerates the phase transformation of NiFe-MIL-53 and the in-situ formed Rh@NiFeOOH is the actual active species.More importantly,the enhanced reversibility of electrochemical reconstruction between NiFeOOH and NiFe(OH)_(2)after doping Rh is beneficial for improving the electrochemical stability of the catalyst.X-ray photoelectron spectroscopy spectra show the strong electronic interaction between single-atom Rh and Ni/Fe in Rh@NiFeOOH.Furthermore,theoretical calculations confirm that the integration of single-atom Rh into the NiFeOOH successfully reduces the band gap,regulates the d-band center(εd),accelerates the charge transfer,and optimizes the adsorption behavior of oxygen-containing intermediates,thereby lowering the energy barrier of rate-determining steps.Consequently,the optimized Rh@NiFe-MIL-53 exhibits excellent OER activity(240 mV)with a small Tafel slope of 48.2 mV dec^(-1)and long-term durability(over1270 h at 10 m A cm^(-2)and 110 h at 200 mA cm^(-2)).This work presents a new perspective on designing highly efficient OER electrocatalysts.展开更多
Artificial carbon fixation is a promising pathway for achieving the carbon cycle and environment remediation.However,the sluggish kinetics of oxygen evolution reaction(OER)and poor selectivity of CO_(2) reduction seri...Artificial carbon fixation is a promising pathway for achieving the carbon cycle and environment remediation.However,the sluggish kinetics of oxygen evolution reaction(OER)and poor selectivity of CO_(2) reduction seriously limited the overall conversion efficiencies of solar energy to chemical fuels.Herein,we demonstrated a facile and feasible strategy to rationally regulate the coordination environment and electronic structure of surface-active sites on both photoanode and cathode.More specifically,the defect engineering has been employed to reduce the coordination number of ultrathin FeNi catalysts decorated on BiVO4 photoanodes,resulting in one of the highest OER activities of 6.51 mA cm^(−2)(1.23 VRHE,AM 1.5G).Additionally,single-atom cobalt(II)phthalocyanine anchoring on the N-rich carbon substrates to increase Co–N coordination number remarkably promotes CO_(2) adsorption and activation for high selective CO production.Their integration achieved a record activity of 109.4μmol cm^(−2) h−1 for CO production with a faradaic efficiency of>90%,and an outstanding solar conversion efficiency of 5.41%has been achieved by further integrating a photovoltaic utilizing the sunlight(>500 nm).展开更多
This work is devoted to the development of a low cost dimensionally stable anode with high oxygen evolution catalytic activity for practical applications.For this purpose,a Ti/SnO_(x)/MnO_(2) anode was fabricated thro...This work is devoted to the development of a low cost dimensionally stable anode with high oxygen evolution catalytic activity for practical applications.For this purpose,a Ti/SnO_(x)/MnO_(2) anode was fabricated through an innovative strategy involving Sn electrodeposition,oxidation,and MnO_(2)-layer preparation.The structure of the anode was characterized,and the oxygen evolution performance was evaluated in a H_(2)SO_(4) solution.The results show that compared with the Ti/SnO_(2)/MnO_(2) anode prepared by the conventional brushing-annealing process,the Ti/SnO_(x)/MnO_(2) anode fabricated through the innovative procedure exhibits a lower oxygen evolution potential and a nearly 40%longer accelerated lifespan.The superior oxygen evolution performance of the Ti/SnO_(x)/MnO_(2) anode is attributed to the distinctive SnO_(x) intermediate layer fabricated through Sn electrodeposition followed by oxidation,which indicates the great potential of the anode as a dimensionally stable anode for metal electrowinning and hydrogen production by electrolysis,etc.展开更多
Oxygen vacancies enable modulating surface reconstruction of transition metal oxides containing metal-oxygen polyhedrons into metallic oxyhydroxide for oxygen evolution reaction(OER),while revealing reconstructing mec...Oxygen vacancies enable modulating surface reconstruction of transition metal oxides containing metal-oxygen polyhedrons into metallic oxyhydroxide for oxygen evolution reaction(OER),while revealing reconstructing mechanism is stuck by the requirement to precisely control exact sites of these vacancies.Herein,oxygen vacancies are localized only within MoO_(4)tetrahedrons rather than CoO_(6)octahedrons in CoMoO_(4)catalyst,guaranteeing coherent reconstruction of CoO_(6)octahedrons into pure CoOOH with tunable activities for OER.Meanwhile,distorted tetrahedron accelerates the dissolution of Mo atoms into alkaline electrolyte,triggering spontaneous transition of partial CoMoO_(4)into Co(OH)_(2).CoO_(6)octahedrons in both CoMoO_(4)and Co(OH)_(2)can transform pure CoOOH completely at lower potential,resulting in excess intrinsic activity whose summit is identified by overpotential at 10 mA cm^(-2)with 22.9%reduction and Tafel slope with 65.3%reduction.Well-defined manipulation over the distorted polyhedrons offers one versatile knob to precisely modulate electronic structure of oxide catalysts with outstanding OER performance.展开更多
Tackling the problem of poor conductivity and catalytic stability of pristine metal-organic frameworks(MOFs) is crucial to improve their oxygen evolution reaction(OER) performance.Herein,we introduce a novel strategy ...Tackling the problem of poor conductivity and catalytic stability of pristine metal-organic frameworks(MOFs) is crucial to improve their oxygen evolution reaction(OER) performance.Herein,we introduce a novel strategy of dysprosium(Dy) doping,using the unique 4f orbitals of this rare earth element to enhance electrocatalytic activity of MOFs.Our method involves constructing Dy-doped Ni-MOF(Dy@Ni-MOF) nanoneedles on carbon cloth via a Dy-induced valence electronic perturbation approach.Experiments and density functional theory(DFT) calculations reveal that Dy doping can effectively modify the electronic structure of the Ni active centers and foster a strong electronic interaction between Ni and Dy.The resulting benefits include a reduced work function and a closer proximity of the d-band center to the Fermi level,which is conducive to improving electrical conductivity and promoting the adsorption of oxygen-containing intermediates.Furthermore,the Dy@Ni-MOF achieves superhydrophilicity,ensuring effective electrolyte contact and thus accelerating reaction kinetics,Ex-situ and in-situ analysis results manifest Dy_(2)O_(3)/NiOOH as the actual active species.Therefore,Dy@Ni-MOF shows impressive OER performance,significantly surpassing Ni-MOF.Besides,the overall water splitting device with Dy@NiMOF as an anode delivers a low cell voltage of 1.51 V at 10 mA cm^(-2) and demonstrates long-term stability for 100 h,positioning it as a promising substitute for precious metal catalysts.展开更多
The incorporation of partial A-site substitution in perovskite oxides represents a promising strategy for precisely controlling the electronic configuration and enhancing its intrinsic catalytic activity.Conventional ...The incorporation of partial A-site substitution in perovskite oxides represents a promising strategy for precisely controlling the electronic configuration and enhancing its intrinsic catalytic activity.Conventional methods for A-site substitution typically involve prolonged high-temperature processes.While these processes promote the development of unique nanostructures with highly exposed active sites,they often result in the uncontrolled configuration of introduced elements.Herein,we present a novel approach for synthesizing two-dimensional(2D)porous GdFeO_(3) perovskite with A-site strontium(Sr)substitution utilizing microwave shock method.This technique enables precise control of the Sr content and simultaneous construction of 2D porous structures in one step,capitalizing on the advantages of rapid heating and cooling(temperature~1100 K,rate~70 K s^(-1)).The active sites of this oxygen-rich defect structure can be clearly revealed through the simulation of the electronic configuration and the comprehensive analysis of the crystal structure.For electrocatalytic oxygen evolution reaction application,the synthesized 2D porous Gd_(0.8)Sr_(0.2)FeO_(3) electrocatalyst exhibits an exceptional overpotential of 294 mV at a current density of 10 mA cm^(-2)and a small Tafel slope of 55.85 mV dec^(-1)in alkaline electrolytes.This study offers a fresh perspective on designing crystal configurations and the construction of nanostructures in perovskite.展开更多
Transition-metal oxyhydroxides are attractive catalysts for oxygen evolution reactions(OERs).Further studies for developing transition-metal oxyhydroxide catalysts and understanding their catalytic mechanisms will ben...Transition-metal oxyhydroxides are attractive catalysts for oxygen evolution reactions(OERs).Further studies for developing transition-metal oxyhydroxide catalysts and understanding their catalytic mechanisms will benefit their quick transition to the next catalysts.Herein,Mo-doped CoOOH was designed as a high-performance model electrocatalyst with durability for 20 h at 10 mAcm−2.Additionally,it had an overpotential of 260 mV(glassy carbon)or 215 mV(nickel foam),which was 78 mV lower than that of IrO_(2)(338 mV).In situ,Raman spectroscopy revealed the transformation process of CoOOH.Calculations using the density functional theory showed that during OER,doped Mo increased the spin-up density of states and shrank the spin-down bandgap of the 3d orbits in the reconstructed CoOOH under the electrochemical activation process,which simultaneously optimized the adsorption and electron conduction of oxygen-related intermediates on Co sites and lowered the OER overpotentials.Our research provides new insights into the methodical planning of the creation of transition-metal oxyhydroxide OER catalysts.展开更多
Electricity-driven water splitting to produce hydrogen is one of the most efficient ways to alleviate energy crisis and environmental pollution problems,in which the anodic oxygen evolution reaction(OER)is the key hal...Electricity-driven water splitting to produce hydrogen is one of the most efficient ways to alleviate energy crisis and environmental pollution problems,in which the anodic oxygen evolution reaction(OER)is the key half-reaction of performance-limiting in water splitting.Given the complicated reaction process and surface reconstruction of the involved catalysts under actual working conditions,unraveling the real active sites,probing multiple reaction intermediates and clarifying catalytic pathways through in-situ characterization techniques and theoretical calculations are essential.In this review,we summarize the recent advancements in understanding the catalytic process,unlocking the water oxidation active phase and elucidating catalytic mechanism of water oxidation by various in-situ characterization techniques.Firstly,we introduce conventionally proposed traditional catalytic mechanisms and novel evolutionary mechanisms of OER,and highlight the significance of optimal catalytic pathways and intrinsic stability.Next,we provide a comprehensive overview of the fundamental working principles,different detection modes,applicable scenarios,and limitations associated with the in-situ characterization techniques.Further,we exemplified the in-situ studies and discussed phase transition detection,visualization of speciation evolution,electronic structure tracking,observation of reaction active intermediates,and monitoring of catalytic products,as well as establishing catalytic structure-activity relationships and catalytic mechanism.Finally,the key challenges and future perspectives for demystifying the water oxidation process are briefly proposed.展开更多
The poor stability of RuO_(2)electrocatalysts has been the primary obstacles for their practical application in polymer electrolyte membrane electrolyzers.To dramatically enhance the durability of RuO_(2)to construct ...The poor stability of RuO_(2)electrocatalysts has been the primary obstacles for their practical application in polymer electrolyte membrane electrolyzers.To dramatically enhance the durability of RuO_(2)to construct activity-stability trade-off model is full of significance but challenging.Herein,a single atom Zn stabilized RuO_(2)with enriched oxygen vacancies(SA Zn-RuO_(2))is developed as a promising alternative to iridium oxide for acidic oxygen evolution reaction(OER).Compared with commercial RuO_(2),the enhanced Ru–O bond strength of SA Zn-RuO_(2)by forming Zn-O-Ru local structure motif is favorable to stabilize surface Ru,while the electrons transferred from Zn single atoms to adjacent Ru atoms protects the Ru active sites from overoxidation.Simultaneously,the optimized surrounding electronic structure of Ru sites in SA ZnRuO_(2)decreases the adsorption energies of OER intermediates to reduce the reaction barrier.As a result,the representative SA Zn-RuO_(2)exhibits a low overpotential of 210 mV to achieve 10 mA cm^(-2)and a greatly enhanced durability than commercial RuO_(2).This work provides a promising dual-engineering strategy by coupling single atom doping and vacancy for the tradeoff of high activity and catalytic stability toward acidic OER.展开更多
High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion te...High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies.Herein,we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER)for alkaline electrolysis,which yields current density of 10 mA cm^(-2)at an overpotential of 215 mV in 0.1 M KOH electrolyte.The catalyst demonstrates an excellent durability for more than 540 h operation with negligible degradation in activity.Raman spectra revealed that the catalyst underwent structure reconstruction during OER,evolving into oxyhydroxide,which was the active site proceeding OER in alkaline electrolyte.In-situ synchrotron X-ray absorption experiment combined with density functional theory calculation suggests a lattice oxygen involved electrocatalytic reaction mechanism for the in-situ generated nickel–iron bimetal-oxyhydroxide catalyst.This mechanism together with the synergy between nickel and iron are responsible for the enhanced catalytic activity and durability.These findings provide promising strategies for the rational design of nonnoble metal OER catalysts.展开更多
Enhancing both the number of active sites available and the intrinsic activity of Co-based electrocatalysts simultaneously is a desirable goal.Herein,a ZIF-67-derived hierarchical porous cobalt sulfide decorated by Au...Enhancing both the number of active sites available and the intrinsic activity of Co-based electrocatalysts simultaneously is a desirable goal.Herein,a ZIF-67-derived hierarchical porous cobalt sulfide decorated by Au nanoparticles(NPs)(denoted as HP-Au@CoxSy@ZIF-67)hybrid is synthesized by low-temperature sulfuration treatment.The well-defined macroporous-mesoporous-microporous structure is obtained based on the combination of polystyrene spheres,as-formed CoxSy nanosheets,and ZIF-67 frameworks.This novel three-dimensional hierarchical structure significantly enlarges the three-phase interfaces,accelerating the mass transfer and exposing the active centers for oxygen evolution reaction.The electronic structure of Co is modulated by Au through charge transfer,and a series of experiments,together with theoretical analysis,is performed to ascertain the electronic modulation of Co by Au.Meanwhile,HP-Au@CoxSy@ZIF-67 catalysts with different amounts of Au were synthesized,wherein Au and NaBH4 reductant result in an interesting“competition effect”to regulate the relative ratio of Co^(2+)/Co^(3+),and moderate Au assists the electrochemical performance to reach the highest value.Consequently,the optimized HP-Au@CoxSy@ZIF-67 exhibits a low overpotential of 340 mV at 10 mA cm^(-2)and a Tafel slope of 42 mV dec-1 for OER in 0.1 M aqueous KOH,enabling efficient water splitting and Zn-air battery performance.The work here highlights the pivotal roles of both microstructural and electronic modulation in enhancing electrocatalytic activity and presents a feasible strategy for designing and optimizing advanced electrocatalysts.展开更多
Metal exsolution engineering has been regarded as a promising strategy for activating intrinsically inert perovskite oxide catalysts toward efficient oxygen evolution reaction.Traditional metal exsolution processes on...Metal exsolution engineering has been regarded as a promising strategy for activating intrinsically inert perovskite oxide catalysts toward efficient oxygen evolution reaction.Traditional metal exsolution processes on perovskites are often achieved by using the reducing hydrogen gas;however,this is not effective for the relatively stable phase,such as Ruddlesden-Popper perovskite oxides.To address this issue,triphenylphosphine is proposed to be a reduction promotor for accelerating the reduction and migration of the target metal atoms,aiming to achieve the effective exsolution of metallic species from Ruddlesden-Popper-type parent perovskites.Upon oxygen evolution reaction,these exsolved metallic aggregates are reconstructed into oxyhydroxides as the real active centers.After further modification by lowpercentage iridium oxide nanoclusters,the optimal catalyst delivered an overpotential as low as 305 mV for generating the density of 10 mA cm^(-2),outperforming these reported noble metal-containing perovskite-based alkaline oxygen evolution reaction electrocatalysts.This work provides a potential approach to activate catalytically inert oxides through promoting surface metal exsolution and explores a novel class of Ruddlesden-Poppertype oxides for electrocatalytic applications.展开更多
Controllable regulation of the reconstruction process for the pre-catalysts towards oxygen evolution remains as a great challenge.In this study,we report a bi-ligand strategy to facilitate the structural transformatio...Controllable regulation of the reconstruction process for the pre-catalysts towards oxygen evolution remains as a great challenge.In this study,we report a bi-ligand strategy to facilitate the structural transformation of coordination compounds to metal oxyhydroxides during oxygen evolution with enhanced activity.A coordination compound consisting of 1,10-ferrocene acid(Fc)and Ni^(2+)was synthesized,in which terephthalic acid was introduced.The second ligand of terephthalic acid facilitates the reconstruction process,inducing an enhanced catalytic activity.In 1 mol·L^(-1)KOH aqueous solution,the optimized catalyst can drive a current density of 10 mA·cm^(-2)under a lower overpotential of 220 mV.Using this catalyst,zinc-air batteries can be prepared.The obtained zinc-air battery presents a large specific capacity of 718 mA·h·g^(-1)with excellent cycling stability for over 100 h far exceeding that of Pt/C+RuO_(2)battery fabricated with commercial catalysts.The excellent performance and low cost of this catalyst will open up broad prospects for the development of advanced systems for water electrolysis and zinc air batteries.展开更多
Improving the reversibility of anionic redox and inhibiting irreversible oxygen evolution are the main challenges in the application of high reversible capacity Li-rich Mn-based cathode materials.A facile synchronous ...Improving the reversibility of anionic redox and inhibiting irreversible oxygen evolution are the main challenges in the application of high reversible capacity Li-rich Mn-based cathode materials.A facile synchronous lithiation strategy combining the advantages of yttrium doping and LiYO_(2) surface coating is proposed.Yttrium doping effectively suppresses the oxygen evolution during the delithiation process by increasing the energy barrier of oxygen evolution reaction through strong Y–O bond energy.LiYO_(2) nanocoating has the function of structural constraint and protection,that protecting the lattice oxygen exposed to the surface,thus avoiding irreversible oxidation.As an Li^(+) conductor,LiYO_(2) nano-coating can provide a fast Li^(+) transfer channel,which enables the sample to have excellent rate performance.The synergistic effect of Y doping and nano-LiYO_(2) coating integration suppresses the oxygen release from the surface,accelerates the diffusion of Li^(+)from electrolyte to electrode and decreases the interfacial side reactions,enabling the lithium ion batteries to obtain good electrochemical performance.The lithium-ion full cell employing the Y-1 sample(cathode)and commercial graphite(anode)exhibit an excellent specific energy density of 442.9 Wh kg^(-1) at a current density of 0.1C,with very stable safety performance,which can be used in a wide temperature range(60 to-15℃)stable operation.This result illustrates a new integration strategy for advanced cathode materials to achieve high specific energy density.展开更多
基金Research Institute for Smart Energy(CDB2)the grant from the Research Institute for Advanced Manufacturing(CD8Z)+4 种基金the grant from the Carbon Neutrality Funding Scheme(WZ2R)at The Hong Kong Polytechnic Universitysupport from the Hong Kong Polytechnic University(CD9B,CDBZ and WZ4Q)the National Natural Science Foundation of China(22205187)Shenzhen Municipal Science and Technology Innovation Commission(JCYJ20230807140402006)Start-up Foundation for Introducing Talent of NUIST and Natural Science Foundation of Jiangsu Province of China(BK20230426).
文摘Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3)Fe oxide/PANI)with a robust hetero-interface,which significantly improves oxygen evolution activities with an overpotential of 270 mV at 10 mA cm^(-2)and specific activity of 2.08 mA cm_(ECSA)^(-2)at overpotential of 300 mV,3.84-fold that of Ni_(3)Fe oxide.It is revealed that the catalyst–support interaction between Ni_(3)Fe oxide and PANI support enhances the Ni–O covalency via the interfacial Ni–N bond,thus promoting the charge and mass transfer on Ni_(3)Fe oxide.Considering the excellent activity and stability,rechargeable Zn-air batteries with optimum Ni_(3)Fe oxide/PANI are assembled,delivering a low charge voltage of 1.95 V to cycle for 400 h at 10 mA cm^(-2).The regulation of the effect of catalyst–support interaction on catalytic activity provides new possibilities for the future design of highly efficient OER catalysts.
基金financially supported by the National Natural Science Foundation of China(22309137,22279095)Open subject project State Key Laboratory of New Textile Materials and Advanced Processing Technologies(FZ2023001).
文摘Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in AEMWEs.Herein,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work.Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER performance.More critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.
文摘Binary composites(ZIF-67/rGO)were synthesized by one-step precipitation method using cobalt nitrate hexahydrate as metal source,2-methylimidazole as organic ligand,and reduced graphene oxide(rGO)as carbon carrier.Then Ru3+was introduced for ion exchange,and the porous Ru-doped Co_(3)O_(4)/rGO(Ru-Co_(3)O_(4)/rGO)composite electrocatalyst was prepared by annealing.The phase structure,morphology,and valence state of the catalyst were analyzed by X-ray powder diffraction(XRD),scanning electron microscope(SEM),transmission electron microscopy(TEM),and X-ray photoelectron spectroscopy(XPS).In 1 mol·L^(-1)KOH,the oxygen evolution reaction(OER)performance of the catalyst was measured by linear sweep voltammetry,cyclic voltammetry,and chronoamperometry.The results show that the combination of Ru doping and rGO provides a fast channel for collaborative electron transfer.At the same time,rGO as a carbon carrier can improve the electrical conductivity of Ru-Co_(3)O_(4)particles,and the uniformly dispersed nanoparticles enable the reactants to diffuse freely on the catalyst.The results showed that the electrochemical performance of Ru-Co_(3)O_(4)/rGO was much better than that of Co_(3)O_(4)/rGO,and the overpotential of Ru-Co_(3)O_(4)/rGO was 363.5 mV at the current density of 50 mA·cm^(-2).
基金financially supported by the National Natural Science Foundation of China(Grant No.22179015,21872142,22302026)the Liao Ning Revitalization Talents Program(XLYC1807196)+1 种基金the fund of the State Key Laboratory of Catalysis in DICP(N-22-06)the open fund of the State Key Laboratory of Molecular Reaction Dynamics in DICP,CAS(SKLMRD-K202414)。
文摘High-entropy(HE)design provides ample opportunities for accessing catalysts with unique physiochemical properties for advanced energy and environmental applications.Although a variety of multi-cationic high-entropy materials(HEMs)have been identified,HEMs consisted of multiple cationic and anionic elements are still limited.Herein,we present the design and synthesis of a series of rutile-structured high-entropy oxy fluorides(HEOFs),including[RuO_(2)]x[MgMnZnCoF_(2)]y,[MnO_(2)]_(x)[MgMnZnCoF_(2)]_(y),[MoO_(2)]_(x)[MgMnZnCoF_(2)]_(y),[SnO_(2)]_(x)[MgMnZnCoF_(2)]_(y)and[TiO_(2)]_(x)[MgMnZnCoF_(2)]_(y)(x:y=3:1,2:1,1:1).All the HEOFs are obtained through mechanochemical alloying rutile-structured oxide and fluoride precursors and the HEOFs inherit the crystal structures of the skeleton oxides.Moreover,the HEOFs exhibit enhanced electrocatalytic oxygen evolution reaction(OER)activity than the corresponding oneelement precursors.Typically,the best-performed HEOF[RuO_(2)]_(3)[MgMnZnCoF_(2)]_(1)catalyst requires an overpotential of 240 mV to achieve a current density of 10 mA cm^(-2),which is lower than RuO_(2)(291 mV),More impressively,the specific mass activity of[RuO_(2)]_(3)[MgMnZnCoF_(2)]_(1)is 537.1 A g_(Ru)^(-1)at1.55 V(vs RHE),which is ca.7.6 times that of RuO_(2)(70.5 A g_(Ru)^(-1)).The enhanced electrocata lytic OER performance obtained on[RuO_(2)]_(3)[MgMnZnCoF_(2)]_(1)is ascribed to the contribution of the different cationic and anionic elements that modulates the electronic structures of the pristine RuO_(2),which facilitates efficient OER kinetics.This work demonstrates the efficacy of high-entropy design towards approaching excellent catalysts for enhanced electrocatalysis.
文摘Oxygen evolution reaction(OER)is often regarded as a crucial bottleneck in the field of renewable energy storage and conversion.To further accelerate the sluggish kinetics of OER,a cation and anion modulation strategy is reported here,which has been proven to be effective in preparing highly active electrocatalyst.For example,the cobalt,sulfur,and phosphorus modulated nickel hydroxide(denoted as NiCoPSOH)only needs an overpotential of 232 mV to reach a current density of 20 mA cm^(–2),demonstrating excellent OER performances.The cation and anion modulation facilitates the generation of high-valent Ni species,which would activate the lattice oxygen and switch the OER reaction pathway from conventional adsorbate evolution mechanism to lattice oxygen mechanism(LOM),as evidenced by the results of electrochemical measurements,Raman spectroscopy and differential electrochemical mass spectrometry.The LOM pathway of NiCoPSOH is further verified by the theoretical calculations,including the upshift of O 2p band center,the weakened Ni–O bond and the lowest energy barrier of rate-limiting step.Thus,the anion and cation modulated catalyst NiCoPSOH could effectively accelerate the sluggish OER kinetics.Our work provides a new insight into the cation and anion modulation,and broadens the possibility for the rational design of highly active electrocatalysts.
基金National Natural Science Foundation of China(22478310,U21A20286 and 22206054)。
文摘Transition metal-based nanomaterials have emerged as promising electrocatalysts for oxygen evolution reaction(OER).Considerable research efforts have shown that self-reconstruction occurs on these nanomaterials under operating conditions of OER process.However,most of them undergo incomplete reconstruction with limited thickness of reconstruction layer,leading to low component utilization and arduous exploration of real catalytic mechanism.Herein,we identify the dynamic behaviors in complete reconstruction of Co-based complexes during OER.The hollow phytic acid(PA)cross-linked CoFe-based complex nanoboxes with porous nanowalls are designed because of their good electrolyte penetration and mass transport ability,in favor of the fast and complete reconstruction.A series of experiment characterizations demonstrate that the reconstruction process includes the fast substitution of PA by OH-to form Co(Fe)(OH)xand subsequent potential-driven oxidation to Co(Fe)OOH.The obtained CoFeOOH delivers a low overpotential of 290 mV at a current density of 10 mA cm^(-2)and a long-term stability.The experiment results together with theory calculations reveal that the Fe incorporation can result in the electron rearrangement of reconstructed CoFeOOH and optimization of their electronic structure,accounting for the enhanced OER activity.The work provides new insights into complete reconstruction of metal-based complexes during OER and offers guidelines for rational design of high-performance electrocatalysts.
基金Natural Science Foundation of China(Grant No.NSFC-22072062,22202098)。
文摘Designing highly active and stable electrocatalysts of oxygen evolution reaction(OER)is one of the crucial challenges.In this study,a novel OER electrocatalyst,NiFe-MIL-53 modified with ultra-low rhodium(Rh@NiFe-MIL-53),is successfully prepared via the hydrothermal method.In-situ Raman spectroscopy and electrochemical impedance spectroscopy reveal that the doped Rh accelerates the phase transformation of NiFe-MIL-53 and the in-situ formed Rh@NiFeOOH is the actual active species.More importantly,the enhanced reversibility of electrochemical reconstruction between NiFeOOH and NiFe(OH)_(2)after doping Rh is beneficial for improving the electrochemical stability of the catalyst.X-ray photoelectron spectroscopy spectra show the strong electronic interaction between single-atom Rh and Ni/Fe in Rh@NiFeOOH.Furthermore,theoretical calculations confirm that the integration of single-atom Rh into the NiFeOOH successfully reduces the band gap,regulates the d-band center(εd),accelerates the charge transfer,and optimizes the adsorption behavior of oxygen-containing intermediates,thereby lowering the energy barrier of rate-determining steps.Consequently,the optimized Rh@NiFe-MIL-53 exhibits excellent OER activity(240 mV)with a small Tafel slope of 48.2 mV dec^(-1)and long-term durability(over1270 h at 10 m A cm^(-2)and 110 h at 200 mA cm^(-2)).This work presents a new perspective on designing highly efficient OER electrocatalysts.
基金supported by the National Natural Science Foundation of China(21832005,22072168,22002175)Major Program of the Lanzhou Institute of Chemical Physics,CAS(No.ZYFZFX-3)+1 种基金Major Science and Technology Projects in Gansu Province(22ZD6GA003)West Light Foundation of The Chinese Academy of Sciences(xbzg-zdsys-202209).
文摘Artificial carbon fixation is a promising pathway for achieving the carbon cycle and environment remediation.However,the sluggish kinetics of oxygen evolution reaction(OER)and poor selectivity of CO_(2) reduction seriously limited the overall conversion efficiencies of solar energy to chemical fuels.Herein,we demonstrated a facile and feasible strategy to rationally regulate the coordination environment and electronic structure of surface-active sites on both photoanode and cathode.More specifically,the defect engineering has been employed to reduce the coordination number of ultrathin FeNi catalysts decorated on BiVO4 photoanodes,resulting in one of the highest OER activities of 6.51 mA cm^(−2)(1.23 VRHE,AM 1.5G).Additionally,single-atom cobalt(II)phthalocyanine anchoring on the N-rich carbon substrates to increase Co–N coordination number remarkably promotes CO_(2) adsorption and activation for high selective CO production.Their integration achieved a record activity of 109.4μmol cm^(−2) h−1 for CO production with a faradaic efficiency of>90%,and an outstanding solar conversion efficiency of 5.41%has been achieved by further integrating a photovoltaic utilizing the sunlight(>500 nm).
文摘This work is devoted to the development of a low cost dimensionally stable anode with high oxygen evolution catalytic activity for practical applications.For this purpose,a Ti/SnO_(x)/MnO_(2) anode was fabricated through an innovative strategy involving Sn electrodeposition,oxidation,and MnO_(2)-layer preparation.The structure of the anode was characterized,and the oxygen evolution performance was evaluated in a H_(2)SO_(4) solution.The results show that compared with the Ti/SnO_(2)/MnO_(2) anode prepared by the conventional brushing-annealing process,the Ti/SnO_(x)/MnO_(2) anode fabricated through the innovative procedure exhibits a lower oxygen evolution potential and a nearly 40%longer accelerated lifespan.The superior oxygen evolution performance of the Ti/SnO_(x)/MnO_(2) anode is attributed to the distinctive SnO_(x) intermediate layer fabricated through Sn electrodeposition followed by oxidation,which indicates the great potential of the anode as a dimensionally stable anode for metal electrowinning and hydrogen production by electrolysis,etc.
基金supported by the National Natural Science Foundation of China(52171156,51771078)
文摘Oxygen vacancies enable modulating surface reconstruction of transition metal oxides containing metal-oxygen polyhedrons into metallic oxyhydroxide for oxygen evolution reaction(OER),while revealing reconstructing mechanism is stuck by the requirement to precisely control exact sites of these vacancies.Herein,oxygen vacancies are localized only within MoO_(4)tetrahedrons rather than CoO_(6)octahedrons in CoMoO_(4)catalyst,guaranteeing coherent reconstruction of CoO_(6)octahedrons into pure CoOOH with tunable activities for OER.Meanwhile,distorted tetrahedron accelerates the dissolution of Mo atoms into alkaline electrolyte,triggering spontaneous transition of partial CoMoO_(4)into Co(OH)_(2).CoO_(6)octahedrons in both CoMoO_(4)and Co(OH)_(2)can transform pure CoOOH completely at lower potential,resulting in excess intrinsic activity whose summit is identified by overpotential at 10 mA cm^(-2)with 22.9%reduction and Tafel slope with 65.3%reduction.Well-defined manipulation over the distorted polyhedrons offers one versatile knob to precisely modulate electronic structure of oxide catalysts with outstanding OER performance.
基金supported by the National Natural Science Foundation of China(52363028,21965005)the Natural Science Foundation of Guangxi Province(2021GXNSFAA076001)the Guangxi Technology Base and Talent Subject(GUIKE AD18126001,GUIKE AD20297039)。
文摘Tackling the problem of poor conductivity and catalytic stability of pristine metal-organic frameworks(MOFs) is crucial to improve their oxygen evolution reaction(OER) performance.Herein,we introduce a novel strategy of dysprosium(Dy) doping,using the unique 4f orbitals of this rare earth element to enhance electrocatalytic activity of MOFs.Our method involves constructing Dy-doped Ni-MOF(Dy@Ni-MOF) nanoneedles on carbon cloth via a Dy-induced valence electronic perturbation approach.Experiments and density functional theory(DFT) calculations reveal that Dy doping can effectively modify the electronic structure of the Ni active centers and foster a strong electronic interaction between Ni and Dy.The resulting benefits include a reduced work function and a closer proximity of the d-band center to the Fermi level,which is conducive to improving electrical conductivity and promoting the adsorption of oxygen-containing intermediates.Furthermore,the Dy@Ni-MOF achieves superhydrophilicity,ensuring effective electrolyte contact and thus accelerating reaction kinetics,Ex-situ and in-situ analysis results manifest Dy_(2)O_(3)/NiOOH as the actual active species.Therefore,Dy@Ni-MOF shows impressive OER performance,significantly surpassing Ni-MOF.Besides,the overall water splitting device with Dy@NiMOF as an anode delivers a low cell voltage of 1.51 V at 10 mA cm^(-2) and demonstrates long-term stability for 100 h,positioning it as a promising substitute for precious metal catalysts.
基金financial support from the National Natural Science Foundation of China (52203070)the Open Fund of State Key Laboratory of New Textile Materials and Advanced Processing Technologies (FZ2022005)+2 种基金the Open Fund of Hubei Key Laboratory of Biomass Fiber and Ecological Dyeing and Finishing (STRZ202203)the financial support provided by the China Scholarship Council (CSC)Visiting Scholar Programfinancial support from Institute for Sustainability,Energy and Resources,The University of Adelaide,Future Making Fellowship,Australia。
文摘The incorporation of partial A-site substitution in perovskite oxides represents a promising strategy for precisely controlling the electronic configuration and enhancing its intrinsic catalytic activity.Conventional methods for A-site substitution typically involve prolonged high-temperature processes.While these processes promote the development of unique nanostructures with highly exposed active sites,they often result in the uncontrolled configuration of introduced elements.Herein,we present a novel approach for synthesizing two-dimensional(2D)porous GdFeO_(3) perovskite with A-site strontium(Sr)substitution utilizing microwave shock method.This technique enables precise control of the Sr content and simultaneous construction of 2D porous structures in one step,capitalizing on the advantages of rapid heating and cooling(temperature~1100 K,rate~70 K s^(-1)).The active sites of this oxygen-rich defect structure can be clearly revealed through the simulation of the electronic configuration and the comprehensive analysis of the crystal structure.For electrocatalytic oxygen evolution reaction application,the synthesized 2D porous Gd_(0.8)Sr_(0.2)FeO_(3) electrocatalyst exhibits an exceptional overpotential of 294 mV at a current density of 10 mA cm^(-2)and a small Tafel slope of 55.85 mV dec^(-1)in alkaline electrolytes.This study offers a fresh perspective on designing crystal configurations and the construction of nanostructures in perovskite.
基金The National Natural Science Foundation of China(Grant Nos.52072114 and 51922008)the 111 Project(Grant No.D17007),the Henan Center for Outstanding Overseas Scientists(Grant No.GZS2018003)+2 种基金Xinxiang Major Science and Technology Projects(Grant No.21ZD001)Guangdong Innovative and Entrepreneurial Research Team Program(2016ZT06N500)Guangdong Provincial Key Laboratory of Energy Materials for Electric Power(2018B030322001)all provided financial support for this work.
文摘Transition-metal oxyhydroxides are attractive catalysts for oxygen evolution reactions(OERs).Further studies for developing transition-metal oxyhydroxide catalysts and understanding their catalytic mechanisms will benefit their quick transition to the next catalysts.Herein,Mo-doped CoOOH was designed as a high-performance model electrocatalyst with durability for 20 h at 10 mAcm−2.Additionally,it had an overpotential of 260 mV(glassy carbon)or 215 mV(nickel foam),which was 78 mV lower than that of IrO_(2)(338 mV).In situ,Raman spectroscopy revealed the transformation process of CoOOH.Calculations using the density functional theory showed that during OER,doped Mo increased the spin-up density of states and shrank the spin-down bandgap of the 3d orbits in the reconstructed CoOOH under the electrochemical activation process,which simultaneously optimized the adsorption and electron conduction of oxygen-related intermediates on Co sites and lowered the OER overpotentials.Our research provides new insights into the methodical planning of the creation of transition-metal oxyhydroxide OER catalysts.
基金support from National Natural Science Foundation of China(Grant Nos.22125903,22209174)the National Key R&D Program of China(Grants 2022YFA1504100)+2 种基金Dalian Innovation Support Plan for High Level Talents(2019RT09)Dalian National Laboratory For Clean Energy(DNL),CAS,DNL Cooperation Fund,CAS(DNL202016,DNL202019)DICP(DICP I2020032).
文摘Electricity-driven water splitting to produce hydrogen is one of the most efficient ways to alleviate energy crisis and environmental pollution problems,in which the anodic oxygen evolution reaction(OER)is the key half-reaction of performance-limiting in water splitting.Given the complicated reaction process and surface reconstruction of the involved catalysts under actual working conditions,unraveling the real active sites,probing multiple reaction intermediates and clarifying catalytic pathways through in-situ characterization techniques and theoretical calculations are essential.In this review,we summarize the recent advancements in understanding the catalytic process,unlocking the water oxidation active phase and elucidating catalytic mechanism of water oxidation by various in-situ characterization techniques.Firstly,we introduce conventionally proposed traditional catalytic mechanisms and novel evolutionary mechanisms of OER,and highlight the significance of optimal catalytic pathways and intrinsic stability.Next,we provide a comprehensive overview of the fundamental working principles,different detection modes,applicable scenarios,and limitations associated with the in-situ characterization techniques.Further,we exemplified the in-situ studies and discussed phase transition detection,visualization of speciation evolution,electronic structure tracking,observation of reaction active intermediates,and monitoring of catalytic products,as well as establishing catalytic structure-activity relationships and catalytic mechanism.Finally,the key challenges and future perspectives for demystifying the water oxidation process are briefly proposed.
基金supported by the Taishan Scholar Program of Shandong Province,China (tsqn202211162)the National Natural Science Foundation of China (22102079)the Natural Science Foundation of Shandong Province of China (ZR2021YQ10,ZR2022QB163)。
文摘The poor stability of RuO_(2)electrocatalysts has been the primary obstacles for their practical application in polymer electrolyte membrane electrolyzers.To dramatically enhance the durability of RuO_(2)to construct activity-stability trade-off model is full of significance but challenging.Herein,a single atom Zn stabilized RuO_(2)with enriched oxygen vacancies(SA Zn-RuO_(2))is developed as a promising alternative to iridium oxide for acidic oxygen evolution reaction(OER).Compared with commercial RuO_(2),the enhanced Ru–O bond strength of SA Zn-RuO_(2)by forming Zn-O-Ru local structure motif is favorable to stabilize surface Ru,while the electrons transferred from Zn single atoms to adjacent Ru atoms protects the Ru active sites from overoxidation.Simultaneously,the optimized surrounding electronic structure of Ru sites in SA ZnRuO_(2)decreases the adsorption energies of OER intermediates to reduce the reaction barrier.As a result,the representative SA Zn-RuO_(2)exhibits a low overpotential of 210 mV to achieve 10 mA cm^(-2)and a greatly enhanced durability than commercial RuO_(2).This work provides a promising dual-engineering strategy by coupling single atom doping and vacancy for the tradeoff of high activity and catalytic stability toward acidic OER.
基金the staff at Beamline (BL08U1-A and BL11B)of the Shanghai Synchrotron Radiation Facility (SSRF)the support from the National Key Research&Development Program of China (2022YFB3803700)+2 种基金the National Natural Science Foundation of China (52171186)the support through the Overseas Outstanding Youth Fund and Shanghai Pujiang Talent Project (21PJ1408500)the financial support from the Center of Hydrogen Science,Shanghai Jiao Tong University。
文摘High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies.Herein,we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER)for alkaline electrolysis,which yields current density of 10 mA cm^(-2)at an overpotential of 215 mV in 0.1 M KOH electrolyte.The catalyst demonstrates an excellent durability for more than 540 h operation with negligible degradation in activity.Raman spectra revealed that the catalyst underwent structure reconstruction during OER,evolving into oxyhydroxide,which was the active site proceeding OER in alkaline electrolyte.In-situ synchrotron X-ray absorption experiment combined with density functional theory calculation suggests a lattice oxygen involved electrocatalytic reaction mechanism for the in-situ generated nickel–iron bimetal-oxyhydroxide catalyst.This mechanism together with the synergy between nickel and iron are responsible for the enhanced catalytic activity and durability.These findings provide promising strategies for the rational design of nonnoble metal OER catalysts.
基金National Natural Science Foundation of China,Grant/Award Numbers:52102260,52171211,51972220,61903235,U22A20145Shandong Provincial Natural Science Foundation,Grant/Award Numbers:ZR2020QB069,ZR2022ME051+4 种基金National Key Research and Development Program of China,Grant/Award Number:2022YFB4002004Scientific and Technological Innovation Ability Improvement Project of Minor Enterprises in Shandong Province,Grant/Award Number:2022TSGC1021Announce the List and Take Charge Project in Jinan,Grant/Award Number:202214012Major innovation project for integrating science,education and industry of Qilu University of Technology (Shandong Academy of Sciences),Grant/Award Numbers:2022JBZ01-07,2022PY044China Postdoctoral Science Foundation,Grant/Award Number:2022M711545。
文摘Enhancing both the number of active sites available and the intrinsic activity of Co-based electrocatalysts simultaneously is a desirable goal.Herein,a ZIF-67-derived hierarchical porous cobalt sulfide decorated by Au nanoparticles(NPs)(denoted as HP-Au@CoxSy@ZIF-67)hybrid is synthesized by low-temperature sulfuration treatment.The well-defined macroporous-mesoporous-microporous structure is obtained based on the combination of polystyrene spheres,as-formed CoxSy nanosheets,and ZIF-67 frameworks.This novel three-dimensional hierarchical structure significantly enlarges the three-phase interfaces,accelerating the mass transfer and exposing the active centers for oxygen evolution reaction.The electronic structure of Co is modulated by Au through charge transfer,and a series of experiments,together with theoretical analysis,is performed to ascertain the electronic modulation of Co by Au.Meanwhile,HP-Au@CoxSy@ZIF-67 catalysts with different amounts of Au were synthesized,wherein Au and NaBH4 reductant result in an interesting“competition effect”to regulate the relative ratio of Co^(2+)/Co^(3+),and moderate Au assists the electrochemical performance to reach the highest value.Consequently,the optimized HP-Au@CoxSy@ZIF-67 exhibits a low overpotential of 340 mV at 10 mA cm^(-2)and a Tafel slope of 42 mV dec-1 for OER in 0.1 M aqueous KOH,enabling efficient water splitting and Zn-air battery performance.The work here highlights the pivotal roles of both microstructural and electronic modulation in enhancing electrocatalytic activity and presents a feasible strategy for designing and optimizing advanced electrocatalysts.
基金supported by Australian Research Council Discovery Projects(DP230101625 and DP200103568)Australian Research Council Future Fel owships(FT180100387 and FT160100281)QUT ECR Scheme Grant(no.2020001179)
文摘Metal exsolution engineering has been regarded as a promising strategy for activating intrinsically inert perovskite oxide catalysts toward efficient oxygen evolution reaction.Traditional metal exsolution processes on perovskites are often achieved by using the reducing hydrogen gas;however,this is not effective for the relatively stable phase,such as Ruddlesden-Popper perovskite oxides.To address this issue,triphenylphosphine is proposed to be a reduction promotor for accelerating the reduction and migration of the target metal atoms,aiming to achieve the effective exsolution of metallic species from Ruddlesden-Popper-type parent perovskites.Upon oxygen evolution reaction,these exsolved metallic aggregates are reconstructed into oxyhydroxides as the real active centers.After further modification by lowpercentage iridium oxide nanoclusters,the optimal catalyst delivered an overpotential as low as 305 mV for generating the density of 10 mA cm^(-2),outperforming these reported noble metal-containing perovskite-based alkaline oxygen evolution reaction electrocatalysts.This work provides a potential approach to activate catalytically inert oxides through promoting surface metal exsolution and explores a novel class of Ruddlesden-Poppertype oxides for electrocatalytic applications.
基金the National Natural Science Foundation of China(21776115,51902140)Six talent peaks project in Jiangsu Province(XCL-2018-017)Open Project of Key Laboratory of Advanced Electrode Materials for Novel Solar Cells for Petroleum and Chemical Industry of China(2024A05D).
文摘Controllable regulation of the reconstruction process for the pre-catalysts towards oxygen evolution remains as a great challenge.In this study,we report a bi-ligand strategy to facilitate the structural transformation of coordination compounds to metal oxyhydroxides during oxygen evolution with enhanced activity.A coordination compound consisting of 1,10-ferrocene acid(Fc)and Ni^(2+)was synthesized,in which terephthalic acid was introduced.The second ligand of terephthalic acid facilitates the reconstruction process,inducing an enhanced catalytic activity.In 1 mol·L^(-1)KOH aqueous solution,the optimized catalyst can drive a current density of 10 mA·cm^(-2)under a lower overpotential of 220 mV.Using this catalyst,zinc-air batteries can be prepared.The obtained zinc-air battery presents a large specific capacity of 718 mA·h·g^(-1)with excellent cycling stability for over 100 h far exceeding that of Pt/C+RuO_(2)battery fabricated with commercial catalysts.The excellent performance and low cost of this catalyst will open up broad prospects for the development of advanced systems for water electrolysis and zinc air batteries.
基金This work was supported by the Fundamental Research Funds for the Central Universities(DUT20LAB123 and DUT20LAB307)the Natural Science Foundation of Jiangsu Province(BK20191167).
文摘Improving the reversibility of anionic redox and inhibiting irreversible oxygen evolution are the main challenges in the application of high reversible capacity Li-rich Mn-based cathode materials.A facile synchronous lithiation strategy combining the advantages of yttrium doping and LiYO_(2) surface coating is proposed.Yttrium doping effectively suppresses the oxygen evolution during the delithiation process by increasing the energy barrier of oxygen evolution reaction through strong Y–O bond energy.LiYO_(2) nanocoating has the function of structural constraint and protection,that protecting the lattice oxygen exposed to the surface,thus avoiding irreversible oxidation.As an Li^(+) conductor,LiYO_(2) nano-coating can provide a fast Li^(+) transfer channel,which enables the sample to have excellent rate performance.The synergistic effect of Y doping and nano-LiYO_(2) coating integration suppresses the oxygen release from the surface,accelerates the diffusion of Li^(+)from electrolyte to electrode and decreases the interfacial side reactions,enabling the lithium ion batteries to obtain good electrochemical performance.The lithium-ion full cell employing the Y-1 sample(cathode)and commercial graphite(anode)exhibit an excellent specific energy density of 442.9 Wh kg^(-1) at a current density of 0.1C,with very stable safety performance,which can be used in a wide temperature range(60 to-15℃)stable operation.This result illustrates a new integration strategy for advanced cathode materials to achieve high specific energy density.
