Permanent magnet synchronous motors(PMSMs)have been widely employed in the industry. Finite-control-set model predictive control(FCS-MPC), as an advanced control scheme, has been developed and applied to improve the p...Permanent magnet synchronous motors(PMSMs)have been widely employed in the industry. Finite-control-set model predictive control(FCS-MPC), as an advanced control scheme, has been developed and applied to improve the performance and efficiency of the holistic PMSM drive systems. Based on the three elements of model predictive control, this paper provides an overview of the superiority of the FCS-MPC control scheme and its shortcomings in current applications. The problems of parameter mismatch, computational burden, and unfixed switching frequency are summarized. Moreover, other performance improvement schemes, such as the multi-vector application strategy, delay compensation scheme, and weight factor adjustment, are reviewed. Finally, future trends in this field is discussed, and several promising research topics are highlighted.展开更多
A novel elevator door driven by tubular permanent magnet linear synchronous motor (TPMLSM) is presented. This TPMLSM applies axial magnet array topology of the secondary rod, air-cored armature windings and slotless s...A novel elevator door driven by tubular permanent magnet linear synchronous motor (TPMLSM) is presented. This TPMLSM applies axial magnet array topology of the secondary rod, air-cored armature windings and slotless structure of the forcer to improve the stability of the thrust. The influence of two major dimensions, the pitch and radius of the permanent magnet (PM), on magnetic field was studied and the best values were given by the finite element analysis (FEA). The magnetic field, back EMF and thrust of the motor were analyzed and the PM size was optimized to reduce the harmonic components of the magnetic field and improve the performance of the motor. Predicted results are validated by the experiment. It is shown that the performance of the motor and the novel elevator door system is satisfying.展开更多
Permanent magnet linear synchronous motor(PMLSM)has the advantages of high thrust density and good control accuracy,which can be applied in high-power and high-speed occasions.In this paper,the analytical models are e...Permanent magnet linear synchronous motor(PMLSM)has the advantages of high thrust density and good control accuracy,which can be applied in high-power and high-speed occasions.In this paper,the analytical models are established to obtain the electromagnetic performance for the PMLSMs with dual secondaries and dual primaries.The air-gap flux density and the electromagnetic thrust are also obtained by the finite element model to verify theoretical analysis.Besides,an improved structure is also put forward in order to suppress the thrust fluctuation of the PMLSM.Finally,the advantages and disadvantages of two PMLSMs topologies are listed.These analyses would provide a guide for the design of PMLSMs applied in high-power and high-speed occasions.展开更多
As a driving motor, surface mounted permanent magnet synchronous motor exhibits high efficiency and high power density. However, it is susceptible to suffer irreversible demagnetization and insulation failure of coils...As a driving motor, surface mounted permanent magnet synchronous motor exhibits high efficiency and high power density. However, it is susceptible to suffer irreversible demagnetization and insulation failure of coils under severe thermal load condition. Therefore, it is essential to predict temperattrre distribution in the driving motor. In this paper, a lumped parameter thermal mode/of surface mounted permanent magnet is investigated. By using finite element method, the iron loss distribution in various parts of the driving motor is achieved. Moreover, the influences of interface gap and flow rate on temperature distribution are discussed. Finally, the simulation of temperature distribution in different parts of the driving motor is achieved. The presented methodology contributes to verify the feasibility of the driving motor design.展开更多
In the design of the motor used for electric vehicles(EVS),vibration and noise problems are often ignored,which reduce the reliability and service life of the motor.In this paper,an interior permanent magnet synchrono...In the design of the motor used for electric vehicles(EVS),vibration and noise problems are often ignored,which reduce the reliability and service life of the motor.In this paper,an interior permanent magnet synchronous motor(IPMSM)with high power density is taken as an example,and its electromagnetic vibration and noise problem is investigated and optimized.Firstly,the factors that generate the electromagnetic force harmonic of IPMSM are analyzed by theoretical derivation.Furthermore,the mode and electromagnetic harmonic distribution of the motor are calculated and analyzed by establishing the electromagnetic-structure-sound coupling simulation model.Then,by combining finite element method(FEM)with modern optimization algorithm,an electromagnetic vibration and noise performance optimization method is proposed in the electromagnetic design stage of the motor.Finally,an IPMSM is optimized by this method for electromagnetic vibration and noise performance.The results of comparison between before and after optimization prove the feasibility of the method.展开更多
Presented field-circuit coupled adaptive time-stepping finite element method to study on permanent magnet linear synchronous motor (PMLSM) characteristics fed by SPWM voltage source inverter.In air-gap field where the...Presented field-circuit coupled adaptive time-stepping finite element method to study on permanent magnet linear synchronous motor (PMLSM) characteristics fed by SPWM voltage source inverter.In air-gap field where the direction or magnitude of the field is changing rapidly,the smallest elements are demanded due to high accuracy to use adaptive meshing technique.The co-simulation was used with the status space functions and time-step finite element functions,in which time-step of the status space functions was the smallest than finite element functions'.The magnitude relation of the normal elec- tromagnetic force and tangential electromagnetic force and the period were attained,and current curve was very abrupt at current zero area due to the bigger resistance and leak- age reactance,including main characteristics of motor voltage and velocity.The simulation results compare triumphantly with the experiments results.展开更多
The detent force of a permanent magnet linear synchronous motor （PMLSM） is analyzed and the corresponding optimization methods are presented to reduce it. The detent force, which is divided into two components, i.e....The detent force of a permanent magnet linear synchronous motor （PMLSM） is analyzed and the corresponding optimization methods are presented to reduce it. The detent force, which is divided into two components, i.e. resulting from the end effect and resulting from the slotting effect, can be analyzed respectively by the finite element method （FEM）. To reduce the detent force arising from the end effect, several optimal design techniques are utilized, namely, adopting the suitable length and end shape of the primary armature. The detent force resulting from the slotting effect is reduced by means of skewing and adjusting the width of the magnets mounted on the secondary armature, and adopting the fractional slots of the primary armature. The validity of the analytical detent force predictions and the effectiveness of the detent force reduction techniques are verified by the experimental measurements.展开更多
To reduce thrust ripple and cost and improve the average thrust of permanent magnet linear motors,a modular dual-field modulation permanent magnet linear motor was studied,and the parameters were optimized.First,sensi...To reduce thrust ripple and cost and improve the average thrust of permanent magnet linear motors,a modular dual-field modulation permanent magnet linear motor was studied,and the parameters were optimized.First,sensitive parameters were selected using the Taguchi method,and then the optimal variables were sampled using the optimal Latin hypercube experimental design method and an ensemble of surrogates model of optimization objectives,and its accuracy was verified.Next,a multi-objective particle swarm optimization algorithm was used to optimize the purpose of“maximum average thrust and minimum thrust ripple”,and the Pareto front of average thrust and thrust ripple was obtained.Finite element analysis showed that the optimized modular dual flux-modulation permanent magnet linear motor(MDFMPMLM)had a 29.5%reduction in thrust ripple and a 5%increase in average thrust compared to the original motor.This study provided an effective method for improving the performance of permanent magnet linear motors.展开更多
This paper introduces a novel method for fast calculating the electromagnetic forces in interior permanent magnet synchronous machines(IPMSMs)under pulse width modulation(PWM)voltage source inverter(VSI)supply based o...This paper introduces a novel method for fast calculating the electromagnetic forces in interior permanent magnet synchronous machines(IPMSMs)under pulse width modulation(PWM)voltage source inverter(VSI)supply based on the small-signal time-harmonic finite element analysis(THFEA),which has been successfully utilized for fast calculating the PWMinduced losses in silicon steel sheets and permanent magnets.Based on the small-signal THFEA,the functional relationships between high-frequency harmonic voltages(HFHVs)and corresponding airgap flux densities are established,which are used for calculating the flux density spectra caused by each HFHV in the PWM voltage spectra.Then,the superposition principle is applied for calculating the flux density spectra caused by fundamental currents and all HFHVs,which are converted to the electromagnetic force spectra at last.The relative errors between the force density spectra calculated with the proposed method and those obtained from traditional time-stepping finite element analysis(TSFEA)using PWM voltages as input are within 3.1%,while the proposed method is 24 times faster than the traditional TSFEA.展开更多
This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calcu...This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calculated the magnetization length of the permanent in the case of parallel magnetization,and took the influence of the permanent magnet relative permeability into consideration.Based on these works,for a given sinusoidal air gap flux density waveform,the corresponding structural parameters can be calculated,so as to achieve the optimization of the permanent magnet.By using this method to optimize the shape of the magnet,the fundamental wave of the air gap flux density can be retained to the greatest extent,so as to eliminate harmonics and maintain the output capacity at the same time.The feasibility and accuracy of the method have been verified by finite element analysis(FEA)and prototype machine experiment.This method is simple and time-saving,and has a satisfactory accuracy,which provides a reference method for permanent magnet optimization of PMSM.展开更多
The halbach permanent magnet synchronous motor(HPMSM)combines the advantages of permanent magnet motors and halbach arrays,which make it very suitable to act as a robot joint motor,and it can also be used in other fie...The halbach permanent magnet synchronous motor(HPMSM)combines the advantages of permanent magnet motors and halbach arrays,which make it very suitable to act as a robot joint motor,and it can also be used in other fields,such as electric vehicles,wind power generation,etc.At first,the sizing equation is derived and the initial design dimensions are calculated for the HPMSM with the rated power of 275W,based on which the finite element parametric model of the motor is built up and the key structural parameters that affect the total harmonic distortion of air-gap flux density and output torque are determined by analyzing multi-objective sensitivity.Then the structure parameters are optimized by using the cuckoo search algorithm.Last,in view of the problem of local overheating of the motor,an improved stator slot structure is proposed and researched.Under the condition of the same outer dimensions,the electromagnetic performance of the HPMSM before and after the improvement are analyzed and compared by the finite element method.It is found that the improved HPMSM can obtain better performances.展开更多
In this paper,a 20kW vehicle built-in permanent magnet synchronous motor is taken as an example,and a magnetic barrier structure is added to the rotor of the motor to solve the uneven saturation problem of the rotor s...In this paper,a 20kW vehicle built-in permanent magnet synchronous motor is taken as an example,and a magnetic barrier structure is added to the rotor of the motor to solve the uneven saturation problem of the rotor side magnetic bridge.This structure improves the air-gap flux density waveform of the motor by influencing the internal magnetic flux path of the motor rotor,thus improving the sine of the no-load back EMF waveform of the motor and reducing the torque ripple of the motor.At the same time,Taguchi method is used to optimize the structural parameters of the added magnetic barrier.In order to facilitate the analysis of its uneven saturation phenomenon and improve the optimization effect,a simple equivalent magnetic network(EMN)model considering the uneven saturation of rotor magnetic bridge is established in this paper,and the initial values of optimization factors are selected based on this model.Finally,the no-load back EMF waveform distortion rate,torque ripple and output torque of the optimized motor are compared and analyzed,and the influence of magnetic barrier structure parameters on the electromagnetic performance of the motor is also analyzed.The results show that the optimized motor can not change the output torque of the motor as much as possible on the basis of reducing the waveform distortion rate of no-load back EMF and torque ripple.展开更多
This paper proposes optimal stator skewed slot analytical method for cogging torque reduction in surface-interior permanent magnet synchronous motor(SIPMSM)and analyzes the characteristics of SIPMSM.The series-paralle...This paper proposes optimal stator skewed slot analytical method for cogging torque reduction in surface-interior permanent magnet synchronous motor(SIPMSM)and analyzes the characteristics of SIPMSM.The series-parallel equivalent magnetic circuit models(EMCMs)of SIPMSM is built based on the characteristics of magnetic circuits,which is used to design the basic electromagnetic parameters of SIPMSM.Analytical expressions of cogging torque are derived from applying analytical techniques.Stator skewed slot for cogging torque minimum is adopted,and the stator skewed slot pitch is confirmed based on the analytical expressions of the resultant cogging torque.The cogging torque,torque ripple,back electromotive force(back-EMF),power-angle characteristics,efficiency and power factor of SIPMSM are analyzed by establishing 3-dimensional finite element model(3-D-FED)of SIPMSM with stator skewed slot and straight slot.It is shown that the comprehensive performance of optimized SIPMSM is improved as confirmed by finite element analysis and analytical calculation results.展开更多
This paper presents an improved finite control set model predictive current control(FCS-MPCC)of a five-phase permanent magnet synchronous motor(PMSM).First,to avoid including all the 32 voltage vectors provided by a t...This paper presents an improved finite control set model predictive current control(FCS-MPCC)of a five-phase permanent magnet synchronous motor(PMSM).First,to avoid including all the 32 voltage vectors provided by a two-level five-phase inverter into the control set,virtual voltage vectors are adopted.As the third current harmonics can be much reduced by virtual voltage vectors automatically,the harmonic items in the cost function of conventional FCS-MPCC are not considered.Furthermore,an adaptive control set is proposed based on voltage prediction.Best control set with proper voltage vector amplitude corresponding to different rotor speed can be achieved by this method.Consequently,current ripples can be largely reduced and the system performs much better.At last,simulations are established to verify the steady and transient performance of the proposed FCS-MPCC,and experiments based on a 2 kW five-phase motor are carried out.The results have validated the performance improvement of the proposed control strategy.展开更多
A novel topology Halbach permanent magnet array is proposed and applied to the design of a printed circuit board(PCB) axial flux permanent magnet(AFPM) motor. Compared with the traditional coreless AFPM motor, this no...A novel topology Halbach permanent magnet array is proposed and applied to the design of a printed circuit board(PCB) axial flux permanent magnet(AFPM) motor. Compared with the traditional coreless AFPM motor, this novel topology for a Halbach permanent magnet array PCB stator AFPM motor has larger air-gap magnetic flux density and air-gap flux per pole. The magnetic flux leakage is effectively reduced, and the air-gap magnetic density is close to the sine wave. Results of the finite element analysis and prototype experiments verify the feasibility and effectiveness of the novel Halbach permanent magnet array PCB stator motor. A reference basis and practical value for the design of the PCB AFPM motor are provided.展开更多
In-wheel direct-drive is the most efficient driving mode for electric vehicles,and it is the trend for applications in the future.In this paper,a novel variable-flux outer-rotor permanent magnet synchronous motor with...In-wheel direct-drive is the most efficient driving mode for electric vehicles,and it is the trend for applications in the future.In this paper,a novel variable-flux outer-rotor permanent magnet synchronous motor with a hybrid magnetic structure design is developed.Due to the hybrid magnetic pole with Nd-Fe-B and Al-Ni-Co permanent magnet(PM),the air-gap flux can be adjusted by changing the magnetization states of Al-Ni-Co PM,which is beneficial to realize a wide range of speeds and loads from the electromagnetic structure design.Firstly,basic structure features of the motor and the flux-adjusting principle are introduced.The design and calculation method of the PM dimensions is derived based on magnetic circuit analysis.Then the Preisach hysteresis model of Al-Ni-Co PM is described and is adopted to analyze the motor performance with the coupling of the time step finite element method(FEM),and the magnetization are investigated.Finally,the operational performance of the proposed motor is obtained by simulation,which verifies the design.展开更多
For an electrical six-degree-of-freedom Stewart platform,it is difficult to compute the equivalent inertia of each motor in real time,as the inertia is time-varying.In this study,an analysis using Kane's equation ...For an electrical six-degree-of-freedom Stewart platform,it is difficult to compute the equivalent inertia of each motor in real time,as the inertia is time-varying.In this study,an analysis using Kane's equation is undertaken of the driven torque of the movements of motor systems(including motor friction,movements of motor systems along with the actuators,rotation around axis of rotors and snails),as well as driven torque of the platform and actuators.The electromagnetic torque was calculated according to vector-controlled permanent magnet synchronous motor(PMSM) dynamics.By equalizing the driven torque and electromagnetic torque,a model was established.This method,taking into consideration the influence of counter electromotive force(EMF) and motor friction,could be applied to the real-time dynamic control of the platform,through which the calculation of the time-varying equivalent inertia is avoided.Finally,simulations with typically desired trajectory inputs are presented and the performance of the Stewart platform is determined.With this approach,the multi-body dynamics of the electrical Stewart platform is better understood.展开更多
永磁同步电机(permanent magnet synchronous motor,PMSM)具有高效率、高功率密度与高可靠性等优势,已在工业界得到广泛应用。文中针对PMSM驱动系统,提出基于拓展控制集的有限控制集无模型预测电流控制(finite-control-set model-free p...永磁同步电机(permanent magnet synchronous motor,PMSM)具有高效率、高功率密度与高可靠性等优势,已在工业界得到广泛应用。文中针对PMSM驱动系统,提出基于拓展控制集的有限控制集无模型预测电流控制(finite-control-set model-free predictive current control,FCS-MFPCC)。首先,分析PMSM系统的数学模型并详述有限控制集模型预测电流控制(finite-control-set model predictive current control,FCS-MPCC)的原理。其次,介绍基于线性扩张状态观测器(linear extended state observer,LESO)的传统FCS-MFPCC。针对传统FCS-MFPCC稳态性能不足的问题,采用基于离散空间矢量调制(discrete space vector modulation,DSVM)的控制集拓展方案,将控制集的电压矢量数目拓展至25。然后,为解决拓展控制集带来的高计算量问题,提出一种快速寻优策略,阐述该策略的实施原理与流程。最后,基于一台500 W PMSM实验平台,对比传统FCS-MFPCC与所提FCS-MFPCC的控制性能,验证所提算法的有效性与优越性。实验结果表明,所提算法能够有效提升系统稳态性能,且定子绕组电流总谐波畸变率由10.07%降低至6.48%。展开更多
基金supported in part by the National Natural Science Foundation of China(51875261)the Postgraduate Research and Practice Innovation Program of Jiangsu Province(KYCX21_3331)+1 种基金the Faculty of Agricultural Equipment of Jiangsu University(NZXB20210103)。
文摘Permanent magnet synchronous motors(PMSMs)have been widely employed in the industry. Finite-control-set model predictive control(FCS-MPC), as an advanced control scheme, has been developed and applied to improve the performance and efficiency of the holistic PMSM drive systems. Based on the three elements of model predictive control, this paper provides an overview of the superiority of the FCS-MPC control scheme and its shortcomings in current applications. The problems of parameter mismatch, computational burden, and unfixed switching frequency are summarized. Moreover, other performance improvement schemes, such as the multi-vector application strategy, delay compensation scheme, and weight factor adjustment, are reviewed. Finally, future trends in this field is discussed, and several promising research topics are highlighted.
基金Project (No. 50607016) supported by the National Natural ScienceFoundation of China
文摘A novel elevator door driven by tubular permanent magnet linear synchronous motor (TPMLSM) is presented. This TPMLSM applies axial magnet array topology of the secondary rod, air-cored armature windings and slotless structure of the forcer to improve the stability of the thrust. The influence of two major dimensions, the pitch and radius of the permanent magnet (PM), on magnetic field was studied and the best values were given by the finite element analysis (FEA). The magnetic field, back EMF and thrust of the motor were analyzed and the PM size was optimized to reduce the harmonic components of the magnetic field and improve the performance of the motor. Predicted results are validated by the experiment. It is shown that the performance of the motor and the novel elevator door system is satisfying.
基金This work has been partly supported in part by National Natural Science Foundation of China under Grants 51877093 and 51707079in part by the National Key Research and Development Program of China under Grant YS2018YFGH000200,in part by the Key Technical Innovation Program of Hubei Province under Grant 2019AAA026.
文摘Permanent magnet linear synchronous motor(PMLSM)has the advantages of high thrust density and good control accuracy,which can be applied in high-power and high-speed occasions.In this paper,the analytical models are established to obtain the electromagnetic performance for the PMLSMs with dual secondaries and dual primaries.The air-gap flux density and the electromagnetic thrust are also obtained by the finite element model to verify theoretical analysis.Besides,an improved structure is also put forward in order to suppress the thrust fluctuation of the PMLSM.Finally,the advantages and disadvantages of two PMLSMs topologies are listed.These analyses would provide a guide for the design of PMLSMs applied in high-power and high-speed occasions.
文摘As a driving motor, surface mounted permanent magnet synchronous motor exhibits high efficiency and high power density. However, it is susceptible to suffer irreversible demagnetization and insulation failure of coils under severe thermal load condition. Therefore, it is essential to predict temperattrre distribution in the driving motor. In this paper, a lumped parameter thermal mode/of surface mounted permanent magnet is investigated. By using finite element method, the iron loss distribution in various parts of the driving motor is achieved. Moreover, the influences of interface gap and flow rate on temperature distribution are discussed. Finally, the simulation of temperature distribution in different parts of the driving motor is achieved. The presented methodology contributes to verify the feasibility of the driving motor design.
基金This work was supported by the Fundamental Research Funds for the Central Universities(No.2019YJS181).
文摘In the design of the motor used for electric vehicles(EVS),vibration and noise problems are often ignored,which reduce the reliability and service life of the motor.In this paper,an interior permanent magnet synchronous motor(IPMSM)with high power density is taken as an example,and its electromagnetic vibration and noise problem is investigated and optimized.Firstly,the factors that generate the electromagnetic force harmonic of IPMSM are analyzed by theoretical derivation.Furthermore,the mode and electromagnetic harmonic distribution of the motor are calculated and analyzed by establishing the electromagnetic-structure-sound coupling simulation model.Then,by combining finite element method(FEM)with modern optimization algorithm,an electromagnetic vibration and noise performance optimization method is proposed in the electromagnetic design stage of the motor.Finally,an IPMSM is optimized by this method for electromagnetic vibration and noise performance.The results of comparison between before and after optimization prove the feasibility of the method.
基金National Natural Sciences Foundation(60474043)Henan Province Science Fund for Distinguished Young Scholars(0412002200)Henan Province Major Projects(0223025300)
文摘Presented field-circuit coupled adaptive time-stepping finite element method to study on permanent magnet linear synchronous motor (PMLSM) characteristics fed by SPWM voltage source inverter.In air-gap field where the direction or magnitude of the field is changing rapidly,the smallest elements are demanded due to high accuracy to use adaptive meshing technique.The co-simulation was used with the status space functions and time-step finite element functions,in which time-step of the status space functions was the smallest than finite element functions'.The magnitude relation of the normal elec- tromagnetic force and tangential electromagnetic force and the period were attained,and current curve was very abrupt at current zero area due to the bigger resistance and leak- age reactance,including main characteristics of motor voltage and velocity.The simulation results compare triumphantly with the experiments results.
基金supported by the National Natural Science Foundation of China (Grant No.60474021)
文摘The detent force of a permanent magnet linear synchronous motor （PMLSM） is analyzed and the corresponding optimization methods are presented to reduce it. The detent force, which is divided into two components, i.e. resulting from the end effect and resulting from the slotting effect, can be analyzed respectively by the finite element method （FEM）. To reduce the detent force arising from the end effect, several optimal design techniques are utilized, namely, adopting the suitable length and end shape of the primary armature. The detent force resulting from the slotting effect is reduced by means of skewing and adjusting the width of the magnets mounted on the secondary armature, and adopting the fractional slots of the primary armature. The validity of the analytical detent force predictions and the effectiveness of the detent force reduction techniques are verified by the experimental measurements.
文摘To reduce thrust ripple and cost and improve the average thrust of permanent magnet linear motors,a modular dual-field modulation permanent magnet linear motor was studied,and the parameters were optimized.First,sensitive parameters were selected using the Taguchi method,and then the optimal variables were sampled using the optimal Latin hypercube experimental design method and an ensemble of surrogates model of optimization objectives,and its accuracy was verified.Next,a multi-objective particle swarm optimization algorithm was used to optimize the purpose of“maximum average thrust and minimum thrust ripple”,and the Pareto front of average thrust and thrust ripple was obtained.Finite element analysis showed that the optimized modular dual flux-modulation permanent magnet linear motor(MDFMPMLM)had a 29.5%reduction in thrust ripple and a 5%increase in average thrust compared to the original motor.This study provided an effective method for improving the performance of permanent magnet linear motors.
基金supported in part by the National Natural Science Foundation of China under projects 51907053by Natural Science Foundation of Jiangsu Province of China under Project BK20190489+1 种基金by the Fundamental Research Funds for the Central Universities under grant B200202167by the China Postdoctoral Science Foundation under grant no.2019M661708。
文摘This paper introduces a novel method for fast calculating the electromagnetic forces in interior permanent magnet synchronous machines(IPMSMs)under pulse width modulation(PWM)voltage source inverter(VSI)supply based on the small-signal time-harmonic finite element analysis(THFEA),which has been successfully utilized for fast calculating the PWMinduced losses in silicon steel sheets and permanent magnets.Based on the small-signal THFEA,the functional relationships between high-frequency harmonic voltages(HFHVs)and corresponding airgap flux densities are established,which are used for calculating the flux density spectra caused by each HFHV in the PWM voltage spectra.Then,the superposition principle is applied for calculating the flux density spectra caused by fundamental currents and all HFHVs,which are converted to the electromagnetic force spectra at last.The relative errors between the force density spectra calculated with the proposed method and those obtained from traditional time-stepping finite element analysis(TSFEA)using PWM voltages as input are within 3.1%,while the proposed method is 24 times faster than the traditional TSFEA.
文摘This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calculated the magnetization length of the permanent in the case of parallel magnetization,and took the influence of the permanent magnet relative permeability into consideration.Based on these works,for a given sinusoidal air gap flux density waveform,the corresponding structural parameters can be calculated,so as to achieve the optimization of the permanent magnet.By using this method to optimize the shape of the magnet,the fundamental wave of the air gap flux density can be retained to the greatest extent,so as to eliminate harmonics and maintain the output capacity at the same time.The feasibility and accuracy of the method have been verified by finite element analysis(FEA)and prototype machine experiment.This method is simple and time-saving,and has a satisfactory accuracy,which provides a reference method for permanent magnet optimization of PMSM.
基金This work was supported by the National Natural Science Foundation of China(51507087)the Six Talents Summit Project of Jiangsu Province(XNYQC-017)the Science and Technology Planning Project of Nantong City(MS22019017).
文摘The halbach permanent magnet synchronous motor(HPMSM)combines the advantages of permanent magnet motors and halbach arrays,which make it very suitable to act as a robot joint motor,and it can also be used in other fields,such as electric vehicles,wind power generation,etc.At first,the sizing equation is derived and the initial design dimensions are calculated for the HPMSM with the rated power of 275W,based on which the finite element parametric model of the motor is built up and the key structural parameters that affect the total harmonic distortion of air-gap flux density and output torque are determined by analyzing multi-objective sensitivity.Then the structure parameters are optimized by using the cuckoo search algorithm.Last,in view of the problem of local overheating of the motor,an improved stator slot structure is proposed and researched.Under the condition of the same outer dimensions,the electromagnetic performance of the HPMSM before and after the improvement are analyzed and compared by the finite element method.It is found that the improved HPMSM can obtain better performances.
基金supported by the National Natural Science Funds of China No.51907129Technology program of Liaoning province No.2021-MS-236。
文摘In this paper,a 20kW vehicle built-in permanent magnet synchronous motor is taken as an example,and a magnetic barrier structure is added to the rotor of the motor to solve the uneven saturation problem of the rotor side magnetic bridge.This structure improves the air-gap flux density waveform of the motor by influencing the internal magnetic flux path of the motor rotor,thus improving the sine of the no-load back EMF waveform of the motor and reducing the torque ripple of the motor.At the same time,Taguchi method is used to optimize the structural parameters of the added magnetic barrier.In order to facilitate the analysis of its uneven saturation phenomenon and improve the optimization effect,a simple equivalent magnetic network(EMN)model considering the uneven saturation of rotor magnetic bridge is established in this paper,and the initial values of optimization factors are selected based on this model.Finally,the no-load back EMF waveform distortion rate,torque ripple and output torque of the optimized motor are compared and analyzed,and the influence of magnetic barrier structure parameters on the electromagnetic performance of the motor is also analyzed.The results show that the optimized motor can not change the output torque of the motor as much as possible on the basis of reducing the waveform distortion rate of no-load back EMF and torque ripple.
基金Supported by National Natural Science Foundation of China(U1361109,51777060)Natural Science Foundation of Henan province(162300410117)the he innovative research team plan of Henan Polytechnic University(T2015-2).
文摘This paper proposes optimal stator skewed slot analytical method for cogging torque reduction in surface-interior permanent magnet synchronous motor(SIPMSM)and analyzes the characteristics of SIPMSM.The series-parallel equivalent magnetic circuit models(EMCMs)of SIPMSM is built based on the characteristics of magnetic circuits,which is used to design the basic electromagnetic parameters of SIPMSM.Analytical expressions of cogging torque are derived from applying analytical techniques.Stator skewed slot for cogging torque minimum is adopted,and the stator skewed slot pitch is confirmed based on the analytical expressions of the resultant cogging torque.The cogging torque,torque ripple,back electromotive force(back-EMF),power-angle characteristics,efficiency and power factor of SIPMSM are analyzed by establishing 3-dimensional finite element model(3-D-FED)of SIPMSM with stator skewed slot and straight slot.It is shown that the comprehensive performance of optimized SIPMSM is improved as confirmed by finite element analysis and analytical calculation results.
基金This work was supported in part by the National Natural Science Foundation of China under 61374125。
文摘This paper presents an improved finite control set model predictive current control(FCS-MPCC)of a five-phase permanent magnet synchronous motor(PMSM).First,to avoid including all the 32 voltage vectors provided by a two-level five-phase inverter into the control set,virtual voltage vectors are adopted.As the third current harmonics can be much reduced by virtual voltage vectors automatically,the harmonic items in the cost function of conventional FCS-MPCC are not considered.Furthermore,an adaptive control set is proposed based on voltage prediction.Best control set with proper voltage vector amplitude corresponding to different rotor speed can be achieved by this method.Consequently,current ripples can be largely reduced and the system performs much better.At last,simulations are established to verify the steady and transient performance of the proposed FCS-MPCC,and experiments based on a 2 kW five-phase motor are carried out.The results have validated the performance improvement of the proposed control strategy.
基金Project supported by the National Natural Science Foundation of China(No.51577125)
文摘A novel topology Halbach permanent magnet array is proposed and applied to the design of a printed circuit board(PCB) axial flux permanent magnet(AFPM) motor. Compared with the traditional coreless AFPM motor, this novel topology for a Halbach permanent magnet array PCB stator AFPM motor has larger air-gap magnetic flux density and air-gap flux per pole. The magnetic flux leakage is effectively reduced, and the air-gap magnetic density is close to the sine wave. Results of the finite element analysis and prototype experiments verify the feasibility and effectiveness of the novel Halbach permanent magnet array PCB stator motor. A reference basis and practical value for the design of the PCB AFPM motor are provided.
基金Supported by the National Natural Science Foundation of China under Grant 51407064。
文摘In-wheel direct-drive is the most efficient driving mode for electric vehicles,and it is the trend for applications in the future.In this paper,a novel variable-flux outer-rotor permanent magnet synchronous motor with a hybrid magnetic structure design is developed.Due to the hybrid magnetic pole with Nd-Fe-B and Al-Ni-Co permanent magnet(PM),the air-gap flux can be adjusted by changing the magnetization states of Al-Ni-Co PM,which is beneficial to realize a wide range of speeds and loads from the electromagnetic structure design.Firstly,basic structure features of the motor and the flux-adjusting principle are introduced.The design and calculation method of the PM dimensions is derived based on magnetic circuit analysis.Then the Preisach hysteresis model of Al-Ni-Co PM is described and is adopted to analyze the motor performance with the coupling of the time step finite element method(FEM),and the magnetization are investigated.Finally,the operational performance of the proposed motor is obtained by simulation,which verifies the design.
文摘For an electrical six-degree-of-freedom Stewart platform,it is difficult to compute the equivalent inertia of each motor in real time,as the inertia is time-varying.In this study,an analysis using Kane's equation is undertaken of the driven torque of the movements of motor systems(including motor friction,movements of motor systems along with the actuators,rotation around axis of rotors and snails),as well as driven torque of the platform and actuators.The electromagnetic torque was calculated according to vector-controlled permanent magnet synchronous motor(PMSM) dynamics.By equalizing the driven torque and electromagnetic torque,a model was established.This method,taking into consideration the influence of counter electromotive force(EMF) and motor friction,could be applied to the real-time dynamic control of the platform,through which the calculation of the time-varying equivalent inertia is avoided.Finally,simulations with typically desired trajectory inputs are presented and the performance of the Stewart platform is determined.With this approach,the multi-body dynamics of the electrical Stewart platform is better understood.
文摘永磁同步电机(permanent magnet synchronous motor,PMSM)具有高效率、高功率密度与高可靠性等优势,已在工业界得到广泛应用。文中针对PMSM驱动系统,提出基于拓展控制集的有限控制集无模型预测电流控制(finite-control-set model-free predictive current control,FCS-MFPCC)。首先,分析PMSM系统的数学模型并详述有限控制集模型预测电流控制(finite-control-set model predictive current control,FCS-MPCC)的原理。其次,介绍基于线性扩张状态观测器(linear extended state observer,LESO)的传统FCS-MFPCC。针对传统FCS-MFPCC稳态性能不足的问题,采用基于离散空间矢量调制(discrete space vector modulation,DSVM)的控制集拓展方案,将控制集的电压矢量数目拓展至25。然后,为解决拓展控制集带来的高计算量问题,提出一种快速寻优策略,阐述该策略的实施原理与流程。最后,基于一台500 W PMSM实验平台,对比传统FCS-MFPCC与所提FCS-MFPCC的控制性能,验证所提算法的有效性与优越性。实验结果表明,所提算法能够有效提升系统稳态性能,且定子绕组电流总谐波畸变率由10.07%降低至6.48%。
