Converters with pulse width modulation are used for connections between the direct current （DC） and alternating current （AC） networks, e.g., in uninterrupted power supply systems, AC electromotor drives, for power...Converters with pulse width modulation are used for connections between the direct current （DC） and alternating current （AC） networks, e.g., in uninterrupted power supply systems, AC electromotor drives, for powering induction furnaces, in audio technique. Spectrum of signals sampled by pulse amplitude modulation and output voltage spectrum of the converter with pulse width modulation have similar properties. Spectrum of signals sampled by pulse amplitude modulation contains a harmonic of frequency equal to the frequency of the modulating signal and the harmonics of frequencies equal to the sum of frequency of the modulating signal and multiples of the sampling frequency. The output voltage spectrum of the converter with bipolar pulse width modulation contains harmonic of frequency equal to the frequency of the modulating signal and harmonics of frequencies equal to sum of the frequency of the modulating signal and multiples of the frequency of the carrier signal. It also contains harmonics of frequencies equal to the sum of the multiples of the frequency of the modulating signal and the multiples of the carrier signal. The comparison analysis was carried out for the harmonics of the output voltage of the converter with bipolar pulse width modulation in time domain. The dependency of the amplitudes and frequency spectrum on the wave forms of the carrier signal and modulating signal was shown. Similarity of the output voltage spectrum of the converter and signal spectrum sampled by the pulse width modulation was also shown. Key words： Output voltage converter with bipolar pulse width modulation, spectral analysis, Fourier series, carrier signal, reference signal.展开更多
Modular multilevel converters(MMCs) operate in the low modulation index region in many applications.However, when utilized at the low modulation index region, large harmonics appear in the output voltage, which degrad...Modular multilevel converters(MMCs) operate in the low modulation index region in many applications.However, when utilized at the low modulation index region, large harmonics appear in the output voltage, which degrade the performance of the MMC. To improve the harmonic characteristic in the low modulation index, the carrier dynamic overlapping switching frequency optimal pulse width modulation(CDOSFOPWM) method is proposed for the MMC here. The whole modulation index region is divided into three regions: high modulation index region, middle modulation index region, and low modulation index region. The carrier amplitude, carrier overlap ratio, and frequency of triangular carriers are chosen dynamically according to the modulation index region of the modulation signals, to achieve the optimal harmonic characteristic in the whole modulation index region and maintain the switching loss. The number of on-state submodules(SMs) can be calculated by CDOSFOPWM, and the selection of SMs is performed by a reducing switching frequency voltage balancing algorithm. Finally, the proposed method is verified by simulation and experimental results.展开更多
针对永磁同步电机下桥臂电流采样拓扑的无位置传感器控制系统,在低载波运行时受数字延时影响易导致位置估计精度低、电流纹波增大、稳定性差等问题,提出一种半周期计算、单采样双更新的空间矢量脉宽调制方法,有效减少系统数字延时。该...针对永磁同步电机下桥臂电流采样拓扑的无位置传感器控制系统,在低载波运行时受数字延时影响易导致位置估计精度低、电流纹波增大、稳定性差等问题,提出一种半周期计算、单采样双更新的空间矢量脉宽调制方法,有效减少系统数字延时。该方法在每个脉冲宽度调制(Pulse-Width Modulation,PWM)的载波过零处采样一次电流,并在采样结束后的半周期内完成目标电压矢量计算。考虑数字延时中电机转过的角度,将目标电压矢量在下一个PWM周期的前、后半周期输出,并分别补偿0.75 T s和1.25 T s等效延时(T s为PWM周期时间),以减小目标电压矢量与实际输出电压矢量之间的误差。将新方法应用于采用模型参考自适应速度观测器的永磁同步电机无位置传感器控制系统中,实验结果表明该方法位置估计精度高、电流纹波小,且可以稳定运行于额定负载、载波比为4.0的工况。展开更多
高速磁浮交通牵引变流器采用24 MVA背靠背三电平有源中点钳位拓扑,其中两台整流器和两台逆变器共用直流母线。该文分析整流侧和逆变侧在不同功率因数下中点电压(neutral point voltage,NPV)偏移机理及不同电压矢量对NPV的具体影响。据此...高速磁浮交通牵引变流器采用24 MVA背靠背三电平有源中点钳位拓扑,其中两台整流器和两台逆变器共用直流母线。该文分析整流侧和逆变侧在不同功率因数下中点电压(neutral point voltage,NPV)偏移机理及不同电压矢量对NPV的具体影响。据此,针对高速磁浮逆变器并联和串联两种模式,建立NPV偏移模型,得到在调制比和功率因数同时变化时NPV的可控区域。为在全速范围保证NPV平衡,提出一种基于平移调制波的协同控制策略。为减轻整流器功率因数和调制比对NPV的影响,采用一种具有相电压半波对称性的载波脉宽调制,并证明其具备NPV自平衡能力。仿真和硬件在环实验表明,所提策略具有NPV恢复到平衡状态所需时间短、可控范围大等优点,可在高速磁浮全速工况下保证NPV平衡。展开更多
文摘Converters with pulse width modulation are used for connections between the direct current （DC） and alternating current （AC） networks, e.g., in uninterrupted power supply systems, AC electromotor drives, for powering induction furnaces, in audio technique. Spectrum of signals sampled by pulse amplitude modulation and output voltage spectrum of the converter with pulse width modulation have similar properties. Spectrum of signals sampled by pulse amplitude modulation contains a harmonic of frequency equal to the frequency of the modulating signal and the harmonics of frequencies equal to the sum of frequency of the modulating signal and multiples of the sampling frequency. The output voltage spectrum of the converter with bipolar pulse width modulation contains harmonic of frequency equal to the frequency of the modulating signal and harmonics of frequencies equal to sum of the frequency of the modulating signal and multiples of the frequency of the carrier signal. It also contains harmonics of frequencies equal to the sum of the multiples of the frequency of the modulating signal and the multiples of the carrier signal. The comparison analysis was carried out for the harmonics of the output voltage of the converter with bipolar pulse width modulation in time domain. The dependency of the amplitudes and frequency spectrum on the wave forms of the carrier signal and modulating signal was shown. Similarity of the output voltage spectrum of the converter and signal spectrum sampled by the pulse width modulation was also shown. Key words： Output voltage converter with bipolar pulse width modulation, spectral analysis, Fourier series, carrier signal, reference signal.
基金supported by National Natural Science Foundation of China(No.51477045)
文摘Modular multilevel converters(MMCs) operate in the low modulation index region in many applications.However, when utilized at the low modulation index region, large harmonics appear in the output voltage, which degrade the performance of the MMC. To improve the harmonic characteristic in the low modulation index, the carrier dynamic overlapping switching frequency optimal pulse width modulation(CDOSFOPWM) method is proposed for the MMC here. The whole modulation index region is divided into three regions: high modulation index region, middle modulation index region, and low modulation index region. The carrier amplitude, carrier overlap ratio, and frequency of triangular carriers are chosen dynamically according to the modulation index region of the modulation signals, to achieve the optimal harmonic characteristic in the whole modulation index region and maintain the switching loss. The number of on-state submodules(SMs) can be calculated by CDOSFOPWM, and the selection of SMs is performed by a reducing switching frequency voltage balancing algorithm. Finally, the proposed method is verified by simulation and experimental results.
文摘针对永磁同步电机下桥臂电流采样拓扑的无位置传感器控制系统,在低载波运行时受数字延时影响易导致位置估计精度低、电流纹波增大、稳定性差等问题,提出一种半周期计算、单采样双更新的空间矢量脉宽调制方法,有效减少系统数字延时。该方法在每个脉冲宽度调制(Pulse-Width Modulation,PWM)的载波过零处采样一次电流,并在采样结束后的半周期内完成目标电压矢量计算。考虑数字延时中电机转过的角度,将目标电压矢量在下一个PWM周期的前、后半周期输出,并分别补偿0.75 T s和1.25 T s等效延时(T s为PWM周期时间),以减小目标电压矢量与实际输出电压矢量之间的误差。将新方法应用于采用模型参考自适应速度观测器的永磁同步电机无位置传感器控制系统中,实验结果表明该方法位置估计精度高、电流纹波小,且可以稳定运行于额定负载、载波比为4.0的工况。
文摘高速磁浮交通牵引变流器采用24 MVA背靠背三电平有源中点钳位拓扑,其中两台整流器和两台逆变器共用直流母线。该文分析整流侧和逆变侧在不同功率因数下中点电压(neutral point voltage,NPV)偏移机理及不同电压矢量对NPV的具体影响。据此,针对高速磁浮逆变器并联和串联两种模式,建立NPV偏移模型,得到在调制比和功率因数同时变化时NPV的可控区域。为在全速范围保证NPV平衡,提出一种基于平移调制波的协同控制策略。为减轻整流器功率因数和调制比对NPV的影响,采用一种具有相电压半波对称性的载波脉宽调制,并证明其具备NPV自平衡能力。仿真和硬件在环实验表明,所提策略具有NPV恢复到平衡状态所需时间短、可控范围大等优点,可在高速磁浮全速工况下保证NPV平衡。
