期刊文献+
共找到26篇文章
< 1 2 >
每页显示 20 50 100
A Dual-Satellite GNSS Positioning Algorithm of High Accuracy in Incomplete Condition 被引量:2
1
作者 Bing Hou Xiaolin Zhang 《China Communications》 SCIE CSCD 2016年第10期58-68,共11页
Global navigation satellite system could provide accurate positioning results in signal complete condition. However, the performance is severe when signal denied, especially for the single-mode Bei Dou receiver. This ... Global navigation satellite system could provide accurate positioning results in signal complete condition. However, the performance is severe when signal denied, especially for the single-mode Bei Dou receiver. This paper proposes a dual-satellite positioning algorithm to promote the positioning performance in the satellite signal gap. The new algorithm utilizes the previous positioning data stored in complete condition to simplify the positioning equations. As the clock bias persists for a short period, this proposed method could work out accurate positioning results by only two visible satellites, without the need of computing the clock bias. Also, the Kalman filtering algorithm is used to smooth the trajectories, and improve the positioning results. During the incomplete period, only two satellites for 30 seconds and three satellites for 60 seconds, the preliminary experiment result shows that, the presented method could provide almost the same positioning results as in complete condition. 展开更多
关键词 Bei Dou navigation satellite system incomplete condition dual-satellite positioning algorithm kalman filtering
在线阅读 下载PDF
Novel indoor positioning system based on ultra-wide bandwidth 被引量:1
2
作者 Zhen Wei Rui Jiang +3 位作者 Xing Wei Yun-An Cheng Lei Cheng Cai Wang 《Visual Computing for Industry,Biomedicine,and Art》 2020年第1期1-6,共6页
To tackle challenges such as interference and poor accuracy of indoor positioning systems,a novel scheme based on ultra-wide bandwidth(UWB)technology is proposed.First,we illustrate a distance measuring method between... To tackle challenges such as interference and poor accuracy of indoor positioning systems,a novel scheme based on ultra-wide bandwidth(UWB)technology is proposed.First,we illustrate a distance measuring method between two UWB devices.Then,a Taylor series expansion algorithm is developed to detect coordinates of the mobile node using the location of anchor nodes and the distance between them.Simulation results show that the observation error under our strategy is within 15 cm,which is superior to existing algorithms.The final experimental data in the hardware system mainly composed of STM32 and DW1000 also confirms the performance of the proposed scheme. 展开更多
关键词 Indoor positioning Ultra-wide bandwidth position algorithm Hardware platform
在线阅读 下载PDF
An indoor positioning system for mobile target tracking based on VLC and IMU fusion 被引量:1
3
作者 Zou Qian Xia Weiwei +3 位作者 Zhang Jing Huang Bonan Yan Feng Shen Lianfeng 《Journal of Southeast University(English Edition)》 EI CAS 2018年第4期451-458,共8页
An indoor positioning system( IPS) is designed to realize positioning and tracking of mobile targets,by taking advantages of both the visible light communication( VLC) and inertial measurement unit( IMU). The platform... An indoor positioning system( IPS) is designed to realize positioning and tracking of mobile targets,by taking advantages of both the visible light communication( VLC) and inertial measurement unit( IMU). The platform of the IPS is designed,which consists of the light-emitting diode( LED)based transmitter,the receiver and the positioning server. To reduce the impact caused by measurement errors,both inertial sensing data and the received signal strength( RSS) from the VLC are calibrated. Then,a practical propagation model is established to obtain the distance between the transmitter and the receiver from the RSS measurements. Furthermore,a hybrid positioning algorithm is proposed by using the adaptive Kalman filter( AKF) and the weighted least squares( WLS)trilateration to estimate the positions of the mobile targets.Experimental results show that the developed IPS using the proposed hybrid positioning algorithm can extend the localization area of VLC,mitigate the IMU drifts and improve the positioning accuracy of mobile targets. 展开更多
关键词 indoor positioning system (IPS) visible light communication (VLC) inertial measurement unit (IMU) hybrid positioning algorithm
在线阅读 下载PDF
CALIBRATION OF A 6-DOF SPACE ROBOT USING GENETIC ALGORITHM 被引量:16
4
作者 LIU Yu JIANG Yanshu +1 位作者 LIANG Bin XU Wenfu 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2008年第6期6-13,共8页
The kinematic error model of a 6-DOF space robot is deduced, and the cost function of kinematic parameter identification is built. With the aid of the genetic algorithm (GA) that has the powerful global adaptive pro... The kinematic error model of a 6-DOF space robot is deduced, and the cost function of kinematic parameter identification is built. With the aid of the genetic algorithm (GA) that has the powerful global adaptive probabilistic search ability, 24 parameters of the robot are identified through simulation, which makes the pose (position and orientation) accuracy of the robot a great improvement. In the process of the calibration, stochastic measurement noises are considered. Lastly, generalization of the identified kinematic parameters in the whole workspace of the robot is discussed. The simulation results show that calibrating the robot with GA is very stable and not sensitive to measurement noise. Moreover, even if the robot's kinematic parameters are relative, GA still has strong search ability to find the optimum solution. 展开更多
关键词 Robot calibration position and orientation accuracy Measurement noises Genetic algorithm
在线阅读 下载PDF
Analysis and Design of Surgical Instrument Localization Algorithm 被引量:1
5
作者 Siyu Lu Jun Yang +4 位作者 Bo Yang Zhengtong Yin Mingzhe Liu Lirong Yin Wenfeng Zheng 《Computer Modeling in Engineering & Sciences》 SCIE EI 2023年第10期669-685,共17页
With the help of surgical navigation system,doctors can operate on patients more intuitively and accurately.The positioning accuracy and real-time performance of surgical instruments are very important to the whole sy... With the help of surgical navigation system,doctors can operate on patients more intuitively and accurately.The positioning accuracy and real-time performance of surgical instruments are very important to the whole system.In this paper,we analyze and design the detection algorithm of surgical instrument location mark,and estimate the posture of surgical instrument.In addition,we optimized the pose by remapping.Finally,the algorithm of location mark detection proposed in this paper and the posture analysis data of surgical instruments are verified and analyzed through experiments.The final result shows a high accuracy. 展开更多
关键词 Surgical navigation system surgical instruments positioning positioning mark detection algorithm matching algorithm posture analysis
在线阅读 下载PDF
A POSITIVE INTERIOR-POINT ALGORITHM FOR NONLINEAR COMPLEMENTARITY PROBLEMS
6
作者 马昌凤 梁国平 陈新美 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2003年第3期355-362,共8页
A new iterative method,which is called positive interior-point algorithm,is presented for solving the nonlinear complementarity problems.This method is of the desirable feature of robustness.And the convergence theore... A new iterative method,which is called positive interior-point algorithm,is presented for solving the nonlinear complementarity problems.This method is of the desirable feature of robustness.And the convergence theorems of the algorithm is established.In addition,some numerical results are reported. 展开更多
关键词 nonlinear complementarity problems positive interior-point algorithm non-smooth equations
在线阅读 下载PDF
Simultaneous Position Estimation and Omnidirectional Camera Parameter Calibration for Multiple Mobile Robots
7
作者 Kosuke Sasahara Akinori Nagano Zhi-Wei Luo 《Journal of Mechanics Engineering and Automation》 2014年第2期106-115,共10页
This paper proposed an algorithm on simultaneous position estimation and calibration of omnidirectional camera parameters for a group of multiple mobile robots. It is aimed at developing of exploration and information... This paper proposed an algorithm on simultaneous position estimation and calibration of omnidirectional camera parameters for a group of multiple mobile robots. It is aimed at developing of exploration and information gathering robotic system in unknown environment. Here, each mobile robot is not possible to know its own position. It can only estimate its own position by using the measurement value including white noise acquired by two omnidirectional cameras mounted on it. Each mobile robot is able to obtain the distance to those robots observed from the images of two omnidirectional cameras while making calibration during moving but not in advance. Simulation of three robots moving straightly shows the effectiveness of the proposed algorithm. 展开更多
关键词 Multiple mobile robots omnidirectional camera cooperative stochastic position estimation algorithm.
在线阅读 下载PDF
A Stochastic Approach for Cooperative Position Estimation of Multiple Mobile Robots
8
《Journal of Mechanics Engineering and Automation》 2014年第1期25-34,共10页
This paper proposes the cooperative position estimation of a group of mobile robots, which pertbrms disaster relief tasks in a wide area. When searching the wide area, it becomes important to know a robot's position ... This paper proposes the cooperative position estimation of a group of mobile robots, which pertbrms disaster relief tasks in a wide area. When searching the wide area, it becomes important to know a robot's position correctly. However, for each mobile robot, it is impossible to know its own position correctly. Therefore, each mobile robot estimates its position from the data of sensor equipped on it. Generally, the sensor data is incorrect since there is sensor noise, etc. This research considers two types of the sensor data errors from omnidirectional camera. One is the error of white noise of the image captured by omnidirectional camera and so on. Another is the error of position and posture between two omnidirectional cameras. To solve the error of latter case, we proposed a self-position estimation algorithm for multiple mobile robots using two omnidirectional cameras and an accelerometer. On the other hand, to solve the error of the former case, this paper proposed an algorithm of cooperative position estimation for multiple mobile robots. In this algorithm, each mobile robot uses two omnidirectional cameras to observe the surrounding mobile robot and get the relative position between mobile robots. Each mobile robot estimates its position with only measurement data of each other mobile robots. The algorithm is based on a Bayesian filtering. Simulations of the proposed cooperative position estimation algorithm for multiple mobile robots are performed. The results show that position estimation is possible by only using measurement value from each other robot. 展开更多
关键词 Multiple mobile robots omnidirectional cameras cooperative stochastic position estimation algorithm.
在线阅读 下载PDF
控制阀智能定位器控制算法及PID参数整定方法研究
9
作者 陆沛琳 杭凌峰 +1 位作者 林振杨 钱前 《阀门》 2024年第9期1055-1058,共4页
智能阀门定位器作为气动控制阀系统的核心部件,其控制性能直接影响气动控制阀门的响应速度、调节精度、稳定性等,从而影响整个工业回路的控制效果。为提高气动控制阀的响应速度、调节精度和稳定性,减小控制阀性能不佳对工业管路系统的影... 智能阀门定位器作为气动控制阀系统的核心部件,其控制性能直接影响气动控制阀门的响应速度、调节精度、稳定性等,从而影响整个工业回路的控制效果。为提高气动控制阀的响应速度、调节精度和稳定性,减小控制阀性能不佳对工业管路系统的影响,设计了一种基于自私群体优化(SHO)算法的控制器。基于直行程的单作用膜片式气动控制阀的物理特性,对智能阀门定位器的PID控制器参数进行自动整定,测试优化后的控制效果,控制过程不出现超调和振荡现象。本方法为后续优化智能阀门定位器控制算法提供一定的参考价值。 展开更多
关键词 控制阀 阀门定位器 自私群体算法(SHO) PID
在线阅读 下载PDF
基于神经网络算法的FISHER智能阀门定位器故障诊断系统
10
作者 马春山 薛秦豫 《自动化应用》 2024年第22期97-99,103,共4页
在工业自动化领域,智能阀门定位器在长期运行中不可避免地会遇到各种故障,若不能及时诊断和处理这些故障,将严重影响生产过程的稳定性和安全性。神经网络算法具有出色的非线性映射能力和学习能力,能为智能阀门定位器的故障诊断提供有效... 在工业自动化领域,智能阀门定位器在长期运行中不可避免地会遇到各种故障,若不能及时诊断和处理这些故障,将严重影响生产过程的稳定性和安全性。神经网络算法具有出色的非线性映射能力和学习能力,能为智能阀门定位器的故障诊断提供有效的技术支持。该算法能够通过模仿人脑的处理机制,从复杂、高维、非线性的数据中学习故障的特征和规律,从而准确诊断阀门定位器故障。介绍了基于神经网络算法的FISHER智能阀门定位器故障诊断系统的研究与实现过程。从神经网络算法的原理、网络结构入手,阐述了系统的总体设计思路和关键技术。 展开更多
关键词 神经网络算法 FISHER智能阀门定位器 故障诊断
在线阅读 下载PDF
智能阀门定位器控制算法的改进 被引量:4
11
作者 刘国平 廖宣亮 胡瑢华 《化工自动化及仪表》 CAS 2012年第4期515-517,共3页
国内诸多阀门定位器产品使用五步开关控制算法,但在低阀位控制时振荡次数多,高阀位控制时调整时间长,因而对五步开关控制算法进行改进。将改进后算法的控制效果与五步开关控制算法控制效果进行对比,算法改进后调整时间减小1.6s,超调量减... 国内诸多阀门定位器产品使用五步开关控制算法,但在低阀位控制时振荡次数多,高阀位控制时调整时间长,因而对五步开关控制算法进行改进。将改进后算法的控制效果与五步开关控制算法控制效果进行对比,算法改进后调整时间减小1.6s,超调量减小12.8%,实现了更快速准确的阀门定位。 展开更多
关键词 智能阀门定位器 控制算法 PWM 压电阀 阀门定位
在线阅读 下载PDF
Improved positioning algorithm based on two step least square in NLOS environments 被引量:1
12
作者 WU Shi-xun LI Ji-ping-yin LIU Shou 《The Journal of China Universities of Posts and Telecommunications》 EI CSCD 2011年第5期58-63,共6页
Non-line-of-sight (NLOS) propagation is a major source of error for accurate time-of-arrival (TOA) location estimation. The two-step least square (LS) method, which does not need any information about the distri... Non-line-of-sight (NLOS) propagation is a major source of error for accurate time-of-arrival (TOA) location estimation. The two-step least square (LS) method, which does not need any information about the distribution of the NLOS error, has been studied in related researches to provide efficient location estimation of the mobile terminal (MT). By observing the estimation of the error covariance matrix in the two-step LS method, this paper finds that the measured distances are more suitable than the initial estimated distances by maximum likelihood (ML) algorithm in NLOS environments. Moreover, by making use of the geometry relations among fixed terminals (FTs), some measured distances which are corrupted by big NLOS errors may be reduced. Further, an iteration method can be adopted to further improve the performance of the algorithm. Accordingly, an improved algorithm based on the two-step LS method is proposed. Simulation results demonstrate that the improved algorithm has better performance than the two-step LS method and converges more quickly. Meanwhile, it is robust in different NLOS environments. 展开更多
关键词 NLOS propagation TOA least square position algorithm maximum likelihood
原文传递
基于预估模糊自适应PID控制的智能电气阀门定位器的应用研究 被引量:6
13
作者 刘娜 何永勃 苏兴国 《自动化与仪器仪表》 2010年第4期66-67,71,共3页
智能电气阀门定位器可应用于多种类型的气动执行机构。由于模型的不精确性,传统控制方法难于满足定位要求。介绍一种智能控制算法,结合Smith预估及模糊自适应PID,补偿对象的纯滞后特性,可自适应模型参数的不精确性。该方法具有简单、响... 智能电气阀门定位器可应用于多种类型的气动执行机构。由于模型的不精确性,传统控制方法难于满足定位要求。介绍一种智能控制算法,结合Smith预估及模糊自适应PID,补偿对象的纯滞后特性,可自适应模型参数的不精确性。该方法具有简单、响应速度快、无超调、鲁棒性高等优点。 展开更多
关键词 智能控制 阀门定位器 SMITH 模糊自适应PID
在线阅读 下载PDF
用于大部件调姿的数控定位器布局及行程优化 被引量:8
14
作者 张洪双 蒋君侠 +1 位作者 柯映林 王青 《计算机集成制造系统》 EI CSCD 北大核心 2013年第11期2742-2747,共6页
针对机翼等大部件装配后姿态调整和精加工等的工艺需求,研制了一种可用于支撑多种机翼的三坐标数控定位器,并对定位器在数字化调姿及精加工平台上的布局和行程进行了分析。将定位器行程解耦成姿态行程和位置行程,建立了适用于多种机翼... 针对机翼等大部件装配后姿态调整和精加工等的工艺需求,研制了一种可用于支撑多种机翼的三坐标数控定位器,并对定位器在数字化调姿及精加工平台上的布局和行程进行了分析。将定位器行程解耦成姿态行程和位置行程,建立了适用于多种机翼的定位器行程的目标函数,利用遗传算法获得定位器的布局和最优行程。通过实例对分析方法进行验证,结果表明所提方法是可行的,为大部件调姿中定位器的布局和结构设计提供了依据。 展开更多
关键词 三坐标数控定位器 姿态调整 行程分析 优化设计 遗传算法
在线阅读 下载PDF
球面拟合法实现机器人与变位机位姿标定 被引量:1
15
作者 陈琳 李权文 +2 位作者 付钰 陈家春 潘海鸿 《组合机床与自动化加工技术》 北大核心 2023年第5期77-80,共4页
机器人与双轴变位机组成焊接工作站时,为保证协同运动的准确,需确定机器人与变位机间位姿变换矩阵,为此提出一种使用球面拟合法实现机器人与变位机位姿标定方法。首先,双轴变位机俯仰轴和旋转轴旋转不同角度时,记录机器人TCP点在对应位... 机器人与双轴变位机组成焊接工作站时,为保证协同运动的准确,需确定机器人与变位机间位姿变换矩阵,为此提出一种使用球面拟合法实现机器人与变位机位姿标定方法。首先,双轴变位机俯仰轴和旋转轴旋转不同角度时,记录机器人TCP点在对应位置的位姿信息,并通过遗传算法求得全局最优原点位置,拟合出最优球面;然后,根据原点位置选取6个最优标定点,计算得到变位机基坐标系的单位方向矢量,最终实现机器人与变位机基座标系间位姿标定。使用自主研发的机器人与变位机焊接工作站进行实验验证,并用激光跟踪仪进行有效性验证,实验表明所提出的方法可以有效减小非线性随机误差,其标定误差在0.3 mm以内,可满足焊接的实际要求。 展开更多
关键词 双轴变位机 球面拟合法 遗传算法 全局最优 非线性误差
在线阅读 下载PDF
智能阀门定位器关键技术的研究与实现 被引量:1
16
作者 吴宁胜 《现代电子技术》 北大核心 2015年第8期139-141,144,共4页
阀门定位器是工业管道控制系统的关键仪表之一。为了提高定位器的控制性能,以AVR单片机为核心设计基于HART通信协议的智能阀门定位器。介绍智能阀门定位器的组成和工作原理,分析系统设计中的几个关键问题。对于低功耗设计、阀位控制算... 阀门定位器是工业管道控制系统的关键仪表之一。为了提高定位器的控制性能,以AVR单片机为核心设计基于HART通信协议的智能阀门定位器。介绍智能阀门定位器的组成和工作原理,分析系统设计中的几个关键问题。对于低功耗设计、阀位控制算法、抗干扰及可靠性设计等关键技术提出了可行的实现方案,在实际应用中取得了很好的效果。所论述的关键技术及实现方法对相关产品的研制有重要的指导意义。 展开更多
关键词 智能阀门定位器 低功耗 阀位控制算法 抗干扰
在线阅读 下载PDF
Artificial neural-network-based visible light positioning algorithm with a diffuse optical channel 被引量:13
17
作者 黄河清 杨爱英 +2 位作者 冯立辉 倪国强 郭芃 《Chinese Optics Letters》 SCIE EI CAS CSCD 2017年第5期16-20,共5页
Visible light positioning becomes popular recently. However, its performance is degraded by the indoor diffuse optical channel. An artificial neural-network-based visible light positioning algorithm is proposed in thi... Visible light positioning becomes popular recently. However, its performance is degraded by the indoor diffuse optical channel. An artificial neural-network-based visible light positioning algorithm is proposed in this Letter, and a trained neural network is used to achieve positioning with a diffuse channel. Simulations are made to evaluate the proposed positioning algorithm. Results show that the average positioning error is reduced about 13 times, and the positioning time is reduced about two magnitudes. Moreover, the proposed algorithm is robust with a different field-of-view of the receiver and the refiectivity of the wall, which is suitable for various position- ing applications. 展开更多
关键词 view LEDS Artificial neural-network-based visible light positioning algorithm with a diffuse optical channel CDF RSS
原文传递
遗传优化PID整定算法在阀门定位器中的应用 被引量:13
18
作者 张涵 刘铁军 +3 位作者 刘波 谢代梁 徐雅 黄震威 《电子测量与仪器学报》 CSCD 北大核心 2021年第11期215-222,共8页
电气阀门定位器调节阀门开度的PID控制过程容易出现较大的超调,通过自然泄气或增加反作用回调阀位,会对系统的鲁棒性和控制效率产生较大影响。提出一种遗传优化的PID整定算法,基于继电反馈法获得系统PID参数的大致范围,并利用改进遗传... 电气阀门定位器调节阀门开度的PID控制过程容易出现较大的超调,通过自然泄气或增加反作用回调阀位,会对系统的鲁棒性和控制效率产生较大影响。提出一种遗传优化的PID整定算法,基于继电反馈法获得系统PID参数的大致范围,并利用改进遗传算法进行PID参数寻优,使系统接近无超调控制,提高控制精度,缩短调节时间。系统获得PID参数用于控制气动调节阀,超调量可控制在0.6%,调节时间相比于传统PID算法缩短66%。仿真和实验结果表明,该整定算法能够实现稳、准、快的控制方式,为优化电气阀门定位器的控制策略提供了一种新的思路。 展开更多
关键词 电气阀门定位器 PID控制 继电反馈法 改进遗传算法 超调量
在线阅读 下载PDF
基于自适应模糊免疫PID阀门定位器的设计 被引量:2
19
作者 马志航 虎恩典 +2 位作者 毛令 朱兆元 刘融宇 《计算机测量与控制》 2021年第7期111-116,共6页
传统工业阀门定位器具有控制精度低、功耗大、控制方式单一、阀位易抖动等缺点,且其在使用的过程中须进行现场调试才能进一步适应生产要求;为了提高阀门定位器控制系统的适应能力,对控制算法进行了深入研究,设计了一种基于STM32芯片的... 传统工业阀门定位器具有控制精度低、功耗大、控制方式单一、阀位易抖动等缺点,且其在使用的过程中须进行现场调试才能进一步适应生产要求;为了提高阀门定位器控制系统的适应能力,对控制算法进行了深入研究,设计了一种基于STM32芯片的低功耗阀门定位器;硬件设计以STM32L152芯片为控制核心,外围电路包括4~20 mA转3.3 V电源电路、开度/位移信号转换电路、人机交互模块电路;软件设计采用自适应免疫模糊PID算法替代常规PID算法,实现了阀位控制参数的自整定;在MATLAB中构建阀门各机构数学模型的广义传递函数,搭建仿真电路;最终得出控制系统的调整时间只需0.8 s,且在整个控制过程中无超调量产生;有效提高了阀门的控制精度,避免了阀位的抖动现象。 展开更多
关键词 阀门定位器 模糊免疫PID算法 低功耗 自适应
在线阅读 下载PDF
智能阀门定位器控制系统设计 被引量:11
20
作者 汪川 《自动化仪表》 CAS 2020年第6期77-79,共3页
在工业生产过程控制中,有些传统仪表必须进行现场调整来适应生产要求。为改变这一状况,必须迅速、准确地掌握阀门的工作状况。对气动阀门定位器的工作特性和控制算法进行了研究。采用比例-积分-微分(PID)控制算法,实现了阀门控制参数的... 在工业生产过程控制中,有些传统仪表必须进行现场调整来适应生产要求。为改变这一状况,必须迅速、准确地掌握阀门的工作状况。对气动阀门定位器的工作特性和控制算法进行了研究。采用比例-积分-微分(PID)控制算法,实现了阀门控制参数的自整定。设计以低功耗MSP430单片机为核心,采集现场的电流、反馈、速度等参数;以阀位反馈和液晶显示为辅助控制单元,结合PID控制算法对工业数据进行处理、运算和显示,完成了阀门控制系统中阀门位置的精确、快速控制。介绍了智能阀门定位器控制系统的硬件设计和软件流程。试验结果表明,该系统定位准确、操作方便、功耗低,完全满足生产定位控制的要求。该定位器工作稳定、可靠性高,调节阀的响应速度和定位器控制精度等技术性能明显优于传统的阀门定位器。该设计提高了阀门的自动化管理水平,为进一步实现复杂的智能控制提供了便利条件。 展开更多
关键词 MSP430 PID算法 阀门定位器 高可靠性 智能控制
在线阅读 下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部