期刊文献+
共找到432篇文章
< 1 2 22 >
每页显示 20 50 100
Blind Detection of LSB Steganography in Grayscale Images
1
作者 胡玲娜 蒋铃鸽 何晨 《Journal of Shanghai Jiaotong university(Science)》 EI 2007年第2期239-242,共4页
There are many detectors for the least significant bit(LSB)steganography which is broadly used in hiding information in the digital images.The length of the hidden information is one of the most important parameters i... There are many detectors for the least significant bit(LSB)steganography which is broadly used in hiding information in the digital images.The length of the hidden information is one of the most important parameters in detecting steganographic information.Using 2-D gradient of a pixel and the distance between variables the proposed method gives the length of hidden information in natural grayscale images without original image.Extensive experimental results show good performance even at low embedding rate compared with other methods.Furthermore,the proposed method also works well disregarding the status of the embedded information. 展开更多
关键词 least significant bit (LSB) natural grayscale images 2-D gradient distance of variables
在线阅读 下载PDF
Calibrating the linearity between grayscale and element content for X-ray KES imaging of alloys 被引量:3
2
作者 Xiao-Lu Ju Biao Deng +7 位作者 Ke Li Fu-Cheng Yu Hai-Peng Zhang Ming-Wei Xu Guo-Hao Du Hong-Lan Xie Bin Li Ti-Qiao Xiao 《Nuclear Science and Techniques》 SCIE EI CAS CSCD 2022年第1期1-12,共12页
Doped elements in alloys significantly impact their performance.Conventional methods usually sputter the surface material of the sample,or their performance is limited to the surface of alloys owing to their poor pene... Doped elements in alloys significantly impact their performance.Conventional methods usually sputter the surface material of the sample,or their performance is limited to the surface of alloys owing to their poor penetration ability.The X-ray K-edge subtraction(KES)method exhibits great potential for the nondestructive in situ detection of element contents in alloys.However,the signal of doped elements usually deteriorates because of the strong absorption of the principal component and scattering of crystal grains.This in turn prevents the extensive application of X-ray KES imaging to alloys.In this study,methods were developed to calibrate the linearity between the grayscale of the KES image and element content.The methods were aimed at the sensitive analysis of elements in alloys.Furthermore,experiments with phantoms and alloys demonstrated that,after elaborate calibration,X-ray KES imaging is capable of nondestructive and sensitive analysis of doped elements in alloys. 展开更多
关键词 X-ray KES imaging grayscale calibration Element analysis for alloy Nondestructive imaging of elements
在线阅读 下载PDF
Research on Defect Detection of Wind Turbine Blades Based on Morphology and Improved Otsu Algorithm Using Infrared Images
3
作者 Shuang Kang Yinchao He +1 位作者 Wenwen Li Sen Liu 《Computers, Materials & Continua》 SCIE EI 2024年第10期933-949,共17页
To address the issues of low accuracy and high false positive rate in traditional Otsu algorithm for defect detection on infrared images of wind turbine blades(WTB),this paper proposes a technique that combines morpho... To address the issues of low accuracy and high false positive rate in traditional Otsu algorithm for defect detection on infrared images of wind turbine blades(WTB),this paper proposes a technique that combines morphological image enhancement with an improved Otsu algorithm.First,mathematical morphology’s differential multi-scale white and black top-hat operations are applied to enhance the image.The algorithm employs entropy as the objective function to guide the iteration process of image enhancement,selecting appropriate structural element scales to execute differential multi-scale white and black top-hat transformations,effectively enhancing the detail features of defect regions and improving the contrast between defects and background.Afterwards,grayscale inversion is performed on the enhanced infrared defect image to better adapt to the improved Otsu algorithm.Finally,by introducing a parameter K to adjust the calculation of inter-class variance in the Otsu method,the weight of the target pixels is increased.Combined with the adaptive iterative threshold algorithm,the threshold selection process is further fine-tuned.Experimental results show that compared to traditional Otsu algorithms and other improvements,the proposed method has significant advantages in terms of defect detection accuracy and reducing false positive rates.The average defect detection rate approaches 1,and the average Hausdorff distance decreases to 0.825,indicating strong robustness and accuracy of the method. 展开更多
关键词 Morphological enhancement improved Otsu algorithm infrared image grayscale inversion adaptive iterative thresholding
在线阅读 下载PDF
Grayscale Mapping of Historically Irrigated LandsUsing GIS
4
作者 Thomas C. Turney 《Journal of Geographic Information System》 2012年第1期33-36,共4页
This document describes the use of grayscale mapping and GIS for identification of historical irrigated lands. Historical irrigated lands form the basis for water rights—a private property right in New Mexico that is... This document describes the use of grayscale mapping and GIS for identification of historical irrigated lands. Historical irrigated lands form the basis for water rights—a private property right in New Mexico that is bought and sold on the open market. Identification of irrigated land on historical photography is both a science and an art. Grayscale mapping of historic black and white photographs can aid in the identification of irrigated lands. GIS allows historical images to be geo-referenced and area computations to be performed on polygons that define the irrigated lands. 展开更多
关键词 GIS Geo-Referencing images Water RIGHTS Irrigation Area COMPUTATIONS grayscale MAPPING
在线阅读 下载PDF
A Multi-Stream Scrambling and DNA Encoding Method Based Image Encryption
5
作者 Nashat Salih Abdulkarim Alsandi Dilovan Asaad Zebari +4 位作者 Adel Al-Zebari Falah Y.H.Ahmed Mazin Abed Mohammed Marwan Albahar Abdulaziz Ali Albahr 《Computer Systems Science & Engineering》 SCIE EI 2023年第11期1321-1347,共27页
Information security has emerged as a key problem in encryption because of the rapid evolution of the internet and networks.Thus,the progress of image encryption techniques is becoming an increasingly serious issue an... Information security has emerged as a key problem in encryption because of the rapid evolution of the internet and networks.Thus,the progress of image encryption techniques is becoming an increasingly serious issue and considerable problem.Small space of the key,encryption-based low confidentiality,low key sensitivity,and easily exploitable existing image encryption techniques integrating chaotic system and DNA computing are purposing the main problems to propose a new encryption technique in this study.In our proposed scheme,a three-dimensional Chen’s map and a one-dimensional Logistic map are employed to construct a double-layer image encryption scheme.In the confusion stage,different scrambling operations related to the original plain image pixels are designed using Chen’s map.A stream pixel scrambling operation related to the plain image is constructed.Then,a block scrambling-based image encryption-related stream pixel scrambled image is designed.In the diffusion stage,two rounds of pixel diffusion are generated related to the confusing image for intra-image diffusion.Chen’s map,logistic map,and DNA computing are employed to construct diffusion operations.A reverse complementary rule is applied to obtain a new form of DNA.A Chen’s map is used to produce a pseudorandom DNA sequence,and then another DNA form is constructed from a reverse pseudorandom DNA sequence.Finally,the XOR operation is performed multiple times to obtain the encrypted image.According to the simulation of experiments and security analysis,this approach extends the key space,has great sensitivity,and is able to withstand various typical attacks.An adequate encryption effect is achieved by the proposed algorithm,which can simultaneously decrease the correlation between adjacent pixels by making it near zero,also the information entropy is increased.The number of pixels changing rate(NPCR)and the unified average change intensity(UACI)both are very near to optimal values. 展开更多
关键词 grayscale image encryption stream scrambling-confusion DNA encoding XOR operation chaotic systems
在线阅读 下载PDF
基于角点相关匹配识别的试样变形测量方法研究
6
作者 邵龙潭 唐孝强 郭晓霞 《岩土力学》 北大核心 2025年第2期665-672,共8页
将数字图像测量技术应用于常规土工三轴试验,成功解决了传统变形测量中的诸多难题,显著提升了测量精度与效率。但高像素图像中灰度阶层的多样性和渐变性使得梯度迭代计算变得复杂,角点附近存在多个潜在的角点候选位置,直接影响了亚像素... 将数字图像测量技术应用于常规土工三轴试验,成功解决了传统变形测量中的诸多难题,显著提升了测量精度与效率。但高像素图像中灰度阶层的多样性和渐变性使得梯度迭代计算变得复杂,角点附近存在多个潜在的角点候选位置,直接影响了亚像素角点定位精度。为了解决亚像素角点检测算法的定位偏差问题,针对已研发的土工三轴试验试样全表面变形数字图像测量系统,提出了基于角点相关匹配识别的亚像素角点检测方法。该方法首先运用Harris检测算法从原始图像中提取整像素角点坐标,随后以这些角点为中心构建固定尺寸的灰度子区。通过子区间的相关匹配迭代处理,获取了初始整像素角点在变形后的亚像素级位移。在模拟试样仿射变形试验中,改进后的算法在继承角点特征稳健识别的基础上,具有良好的仿射不变性,平均绝对误差降低了80.5%,大幅度提高了三轴试验试样全表面变形测量精度。 展开更多
关键词 角点相关匹配 数字图像测量 定位偏差 灰度子区
在线阅读 下载PDF
CT反转与MRI在直肠癌直肠系膜筋膜中的应用比较研究
7
作者 李雪萍 孙楠 +3 位作者 卢巧媛 吴佳奇 李晓婷 张晓燕 《磁共振成像》 北大核心 2025年第1期29-35,共7页
目的本研究主要目标为利用后处理工作站中的Invert-CT反转技术将常规CT扫描图像密度进行反转,可获得与MRI-T2WI相仿的图像,经过对比,评价经反转之后的多层螺旋CT(multidetector-row computed tomography,MDCT)图像在直肠系膜筋膜(mesore... 目的本研究主要目标为利用后处理工作站中的Invert-CT反转技术将常规CT扫描图像密度进行反转,可获得与MRI-T2WI相仿的图像,经过对比,评价经反转之后的多层螺旋CT(multidetector-row computed tomography,MDCT)图像在直肠系膜筋膜(mesorectal fascia,MRF)显示中的应用价值。材料与方法回顾分析因MRI扫描禁忌证,仅有术前CT检查的87例直肠腺癌患者影像,主观评价并比较常规CT图像和“常规CT+反转图像”对于腹膜反折及MRF显示情况、显示范围的差异,以术后病理结果为标准,比较常规CT图像和“常规CT+反转图像”对MRF侵犯的诊断准确率。回顾性收集同期直接行根治性手术治疗、术前MRI资料完整的123例直肠腺癌患者图像,主观评价MRI-T2WI图像中腹膜反折、MRF显示情况、显示范围,以术后病理结果为标准评价MRI诊断MRF侵犯的准确率。比较“常规CT+反转图像”与MRI-T2WI在腹膜反折、MRF显示情况、显示范围及MRF侵犯诊断准确性的差异。结果常规CT图像腹膜反折显示率为24.1%,“常规CT+反转图像”腹膜反折显示率为52.9%,“常规CT+反转图像”的腹膜反折显示率高于常规CT图像(P<0.001)。在MRF显示范围上,“常规CT+反转图像”的显示范围大于常规CT图像,在前、后、左、右四个位置上差异均有统计学意义(P均<0.001)。以病理学评价的环周切缘(circumferential resection margin,CRM)状态为金标准,常规CT图像诊断MRF侵犯的敏感度、特异度和准确率分别为73.3%、93.1%和81.6%;“常规CT+反转图像”诊断MRF侵犯的敏感度、特异度和准确率分别为100.0%、95.8%和96.6%。“常规CT+反转图像”诊断MRF侵犯的准确率高于CT常规图像(P=0.035)。矢状位MRI-T2WI图上腹膜反折显示率为80.5%,在腹膜反折显示方面MRI-T2WI优于反转CT(P<0.001)。在MRF显示范围上,“常规CT+反转图像”的显示范围与轴位MRI-T2WI图像相比,在后侧MRF显示范围方面有差异,MRI-T2WI能够显示的范围更大。以病理学评价的CRM状态为金标准,MRI图像诊断MRF侵犯的敏感度、特异度和准确率分别为100.0%、93.1%和93.5%。MRI图像和“常规CT+反转图像”诊断MRF侵犯的准确率差异无统计学意义(P=0.528)。结论常规CT图像经反转之后能够较好地显示并评价MRF状态,针对有MRI扫描禁忌证的患者,“常规CT+反转图像”可作为较好的替代影像学评价手段,为个体化诊断方案的制订提供重要的参考依据。 展开更多
关键词 直肠癌 直肠系膜筋膜 计算机体层成像 灰度反转 磁共振成像
在线阅读 下载PDF
基于平均灰度值与图像融合算法的光伏板积灰程度识别
8
作者 陈佳豪 杨建蒙 +1 位作者 李斌 王广溢 《热力发电》 北大核心 2025年第3期131-139,共9页
为了精确分析光伏板积灰情况,采用搭建的光伏积灰可视化实验台,引入平均灰度值参数,对光伏板图像进行数值化分析,验证了光伏板图像的平均灰度值与光伏板积灰密度之间存在明确的对应关系。基于此,采用5种融合方法对双光谱影像融合实验台... 为了精确分析光伏板积灰情况,采用搭建的光伏积灰可视化实验台,引入平均灰度值参数,对光伏板图像进行数值化分析,验证了光伏板图像的平均灰度值与光伏板积灰密度之间存在明确的对应关系。基于此,采用5种融合方法对双光谱影像融合实验台采集的可见光图像与红外图像进行融合,将5类融合图像与可见光图像、红外图像汇总构成图像数据集,对这7类图像进行识别与分析。结果表明红外图像对光伏板积灰程度的识别效果受辐照度的影响最小,精度最高,反映出来的积灰程度变化最明显。该结论可以为积灰规律的研究提供理论基础,对光伏板积灰程度的识别具有重要意义。 展开更多
关键词 积灰检测 平均灰度值 图像融合 积灰程度
在线阅读 下载PDF
基于二维灰度图和结构相似生成对抗网络的小样本轴承故障诊断
9
作者 岳健 刘冰 江国乾 《轴承》 北大核心 2025年第3期88-96,共9页
针对轴承故障诊断领域中标记故障样本稀缺,且主流方法在进行数据扩充时存在生成数据质量不高的问题,提出一种基于二维灰度图和结构相似生成对抗网络(SSGAN)的小样本轴承故障诊断方法。首先,将一维振动信号转换为二维灰度图输入SSGAN中... 针对轴承故障诊断领域中标记故障样本稀缺,且主流方法在进行数据扩充时存在生成数据质量不高的问题,提出一种基于二维灰度图和结构相似生成对抗网络(SSGAN)的小样本轴承故障诊断方法。首先,将一维振动信号转换为二维灰度图输入SSGAN中进行对抗训练;其次,结合真实故障样本对生成样本进行结构相似性(SSIM)分析,剔除差异性较大的生成样本,得到辅助训练样本;最后,将扩充后的训练样本输入深度卷积神经网络(DCNN)中进行故障诊断。试验结果表明,所提方法在小样本轴承数据集下的故障识别准确率达到了99.10%,与其他故障诊断方法相比具有明显的优越性。 展开更多
关键词 滚动轴承 故障诊断 小样本 灰度图 生成对抗网络
在线阅读 下载PDF
基于改进ViT的网络流量分类方法
10
作者 李道全 高洁 +1 位作者 聂若琳 胡一帆 《计算机工程与设计》 北大核心 2025年第2期431-437,共7页
目前网络流量分类方法中存在模型结构复杂、特征提取不足等问题,提出一种基于稀疏注意力的改进ViT(SA-ViT)网络流量分类模型。去除数据集中无关字段并转化为灰度图,划分为块序列输入编码器提取特征;引入Longformer稀疏注意力对Self-atte... 目前网络流量分类方法中存在模型结构复杂、特征提取不足等问题,提出一种基于稀疏注意力的改进ViT(SA-ViT)网络流量分类模型。去除数据集中无关字段并转化为灰度图,划分为块序列输入编码器提取特征;引入Longformer稀疏注意力对Self-attention进行优化,使其具有更高的局部与全局特征表达能力;通过对比图像相似度实现流量分类。通过网络公开数据集进行检测,其结果表明,所提算法在分类准确率、精确率以及F1分数等方面有较大提升,验证了该模型的科学性与可行性。 展开更多
关键词 流量分类 Vision Transformer(ViT) 稀疏注意力 Longformer 编解码器 样本不均衡 灰度图
在线阅读 下载PDF
基于光栅干涉的信息隐藏及多彩色显示研究与印刷实现
11
作者 杨琛 刘国栋 +2 位作者 郭凌华 孟卿君 李志健 《包装工程》 北大核心 2025年第1期137-144,共8页
目的针对现有信息隐藏技术存在隐藏信息内容和色彩显示单调性方面的不足,提出一种基于光栅干涉的信息隐藏和多彩色显示技术。方法从莫尔条纹干涉的物理现象出发,将彩色隐藏信息加载在特定设计的点状载体光栅图像上,分析并构建了含隐藏... 目的针对现有信息隐藏技术存在隐藏信息内容和色彩显示单调性方面的不足,提出一种基于光栅干涉的信息隐藏和多彩色显示技术。方法从莫尔条纹干涉的物理现象出发,将彩色隐藏信息加载在特定设计的点状载体光栅图像上,分析并构建了含隐藏信息的载体光栅与解码光栅相互干涉产生的莫尔图案灰度变化函数关系,根据隐藏信息的像素分布规律,对载体光栅不同颜色通道的灰度变换,实现信息的隐藏及多种彩色显示。考虑到隐藏信息的边缘效应,使用多阶调的点状光栅为信息隐藏载体,优化多彩色显示技术的隐藏效果。结果经过通道灰度变换的隐藏图像与原始载体图像的结构相似度指数SSIM均>0.90,解码显示图像与原始隐藏信息的SSIM值均>0.85,调节解码光栅的相位可实现隐藏信息的多彩色显示。在此基础上,进行了数码印刷实验验证,以实现印刷品信息隐藏和多彩色显示。结论提出的信息隐藏和多彩色显示技术可通过印刷方式进行隐藏图像的输出,且达到较好的隐藏和显示效果,证明该方法在印刷包装产品运用的可行性。 展开更多
关键词 莫尔图案 多彩色显示 灰度变换 印刷图像防伪
在线阅读 下载PDF
分形几何学应用下灰度图像目标区域边缘提取方法
12
作者 张海彦 《佳木斯大学学报(自然科学版)》 2025年第1期36-38,97,共4页
在实际应用中,灰度图像往往受到各种噪声的影响,如椒盐噪声、高斯噪声等。这些噪声会干扰图像的边缘信息,使得边缘提取变得困难。为此,提出分形几何学应用下灰度图像目标区域边缘提取方法。利用Canny几何算子对灰度图像平滑处理。基于此... 在实际应用中,灰度图像往往受到各种噪声的影响,如椒盐噪声、高斯噪声等。这些噪声会干扰图像的边缘信息,使得边缘提取变得困难。为此,提出分形几何学应用下灰度图像目标区域边缘提取方法。利用Canny几何算子对灰度图像平滑处理。基于此,采用统一的逼近函数深入推导,将图像的特征逼近至一个特定的划定区域内,实现灰度图像目标区域边缘提取。实验结果表明:研究方法能够准确提取灰度图像目标区域边缘,且边缘提取的精度量化结果接近100%,漏检率低于0.1%。 展开更多
关键词 分形几何特征 灰度图像 目标区域 边缘提取
在线阅读 下载PDF
眼科生物参数测量仪自动对准及对焦方法
13
作者 刘桐生 曾亚光 何志敏 《佛山科学技术学院学报(自然科学版)》 2025年第2期37-42,共6页
为了解决现有眼科生物参数测量仪对准对焦速度慢、精度低和普适性差的问题,提出了基于灰度能量曲线的光轴中心自动对准算法以及基于决策树的自动对焦算法。首先,对仪器实拍的人眼图像进行局部区域高斯模糊预处理,再利用行和列方向的灰... 为了解决现有眼科生物参数测量仪对准对焦速度慢、精度低和普适性差的问题,提出了基于灰度能量曲线的光轴中心自动对准算法以及基于决策树的自动对焦算法。首先,对仪器实拍的人眼图像进行局部区域高斯模糊预处理,再利用行和列方向的灰度能量曲线定位靶环感兴趣区域。最后,经过图像后处理可以得到完整的靶环区域,用光斑质心拟合椭圆的方法来计算光轴中心位置。此外,还利用靶环区域作为先验知识,通过提取靶环大小和清晰度特征构建数据集,并训练决策树分类模型区分准焦-近离焦-远离焦图像,实现仪器自动对焦。实验结果表明,所提算法的定位误差在3像素以内,单帧图像的对准和对焦平均处理时间为14.8ms,具有实时性、高精度和鲁棒性强等优点,满足眼科生物参数测量自动对准和对焦的要求。 展开更多
关键词 自动对准 自动对焦 中心定位 灰度能量曲线 决策树 图像处理 眼科医疗设备
在线阅读 下载PDF
面向体育训练质量提升的教学视频图像规范动作分割方法
14
作者 胡伟东 高夕 蔡晓菲 《绵阳师范学院学报》 2025年第2期133-140,共8页
为了提升体育项目的训练质量,设计了教学视频图像规范动作分割方法.由于灰度图像只包含亮度信息,不包含颜色信息,因此对教学视频图像实施灰度转换,以提高图像的处理速度,降低后续的计算复杂度.基于空间梯度特征实施特征转换,采用梯度特... 为了提升体育项目的训练质量,设计了教学视频图像规范动作分割方法.由于灰度图像只包含亮度信息,不包含颜色信息,因此对教学视频图像实施灰度转换,以提高图像的处理速度,降低后续的计算复杂度.基于空间梯度特征实施特征转换,采用梯度特征与高斯卷积操作相结合的方法,提取在时空域中的动作特征,通过统计动作序列的前后向帧间差分二维投影特征完成动作的快速检测.对多级时序卷积网络实施改进,通过增加阶段级联模块、双膨胀层以及分界生成模块来完善传统时序动作分割模型的性能.测试结果表明,设计方法的规范动作分割效果边缘清晰、细节完整,背景剔除的效果较好.随着动作复杂性的增长,设计方法的编辑分数与F1分数仅有少量下降,整体性能表现较为平稳且性能表现良好. 展开更多
关键词 体育训练质量 灰度转换 教学视频图像 规范动作分割 阶段级联模块 分界生成模块
在线阅读 下载PDF
High-resolution grayscale image hidden in a laser beam 被引量:2
15
作者 Fuyong Yue Chunmei Zhang +4 位作者 Xiao-Fei Zang Dandan Wen Brian D Gerardot Shuang Zhang Xianzhong Chen 《Light(Science & Applications)》 SCIE EI CAS CSCD 2017年第1期243-248,共6页
Images perceived by human eyes or recorded by cameras are usually optical patterns with spatially varying intensity or color profiles.In addition to the intensity and color,the information of an image can be encoded i... Images perceived by human eyes or recorded by cameras are usually optical patterns with spatially varying intensity or color profiles.In addition to the intensity and color,the information of an image can be encoded in a spatially varying distribution of phase or polarization state.Interestingly,such images might not be able to be directly viewed by human eyes or cameras because they may exhibit highly uniform intensity profiles.Here,we propose and experimentally demonstrate an approach to hide a high-resolution grayscale image in a square laser beam with a size of less than half a millimeter.An image with a pixel size of 300×300 nm is encoded into the spatially variant polarization states of the laser beam,which can be revealed after passing through a linear polarizer.This unique technology for hiding grayscale images and polarization manipulation provides new opportunities for various applications,including encryption,imaging,optical communications,quantum science and fundamental physics. 展开更多
关键词 grayscale image metasurface polarization manipulation
原文传递
Grayscale image statistics of COVID-19 patient CT scans characterize lung condition with machine and deep learning
16
作者 Sara Ghashghaei David A.Wood +1 位作者 Erfan Sadatshojaei Mansooreh Jalilpoor 《Chronic Diseases and Translational Medicine》 CSCD 2022年第3期191-206,共16页
Background:Grayscale image attributes of computed tomography(CT)of pulmonary scans contain valuable information relating to patients with respiratory ailments.These attributes are used to evaluate the severity of lung... Background:Grayscale image attributes of computed tomography(CT)of pulmonary scans contain valuable information relating to patients with respiratory ailments.These attributes are used to evaluate the severity of lung conditions of patients confirmed to be with and without COVID-19.Method:Five hundred thirteen CT images relating to 57 patients(49 with COVID-19;8 free of COVID-19)were collected at Namazi Medical Centre(Shiraz,Iran)in 2020 and 2021.Five visual scores(VS:0,1,2,3,or 4)are clinically assigned to these images with the score increasing with the severity of COVID-19-related lung conditions.Eleven deep learning and machine learning techniques(DL/ML)are used to distinguish the VS class based on 12 grayscale image attributes.Results:The convolutional neural network achieves 96.49%VS accuracy(18 errors from 513 images)successfully distinguishing VS Classes 0 and 1,outperforming clinicians’visual inspections.An algorithmic score(AS),involving just five grayscale image attributes,is developed independently of clinicians’assessments(99.81%AS accuracy;1 error from 513 images).Conclusion:Grayscale CT image attributes can be successfully used to distinguish the severity of COVID-19 lung damage.The AS technique developed provides a suitable basis for an automated system using ML/DL methods and 12 image attributes. 展开更多
关键词 computed tomography analysis confusion-matrix analysis COVID-19 lung feature recognition grayscale image attributes visual versus algorithmic classification
原文传递
基于红外热成像的煤矸识别方法研究 被引量:1
17
作者 程刚 潘择烨 +1 位作者 魏溢凡 陈杰 《工矿自动化》 CSCD 北大核心 2024年第4期69-77,共9页
基于重介选煤、跳汰选煤、浮选、干法选煤、γ射线检测法的煤矸分选方法投资成本高、分选效率低、环境污染严重,基于CCD相机的煤矸分选方法准确率不高,基于X射线的煤矸分选技术会危害工作人员的健康。红外热成像技术不受光照、粉尘影响... 基于重介选煤、跳汰选煤、浮选、干法选煤、γ射线检测法的煤矸分选方法投资成本高、分选效率低、环境污染严重,基于CCD相机的煤矸分选方法准确率不高,基于X射线的煤矸分选技术会危害工作人员的健康。红外热成像技术不受光照、粉尘影响,且不会对人体造成伤害。提出了一种基于红外热成像的煤矸识别方法。首先,煤和矸石在传送带的输送下经过加热区域,红外热成像仪监测经均匀加热后的煤和矸石中心点的温度,得到煤和矸石加热后的温度并对经加热区域均匀加热后的煤和矸石进行拍摄,得到煤和矸石的红外灰度图像和红外彩色图像。然后,选用高斯滤波对煤和矸石的红外灰度图像、红外彩色图像进行预处理并提取特征,将红外灰度图像的灰度均值、最大频数对应的灰度值特征和红外彩色图像的G通道一阶矩、G通道二阶矩特征作为分选特征,将上述4个特征作为分类模型的输入。最后,采用支持向量机(SVM)进行分类识别,从而达到识别煤和矸石的目的。实验结果表明:基于红外热成像的煤矸识别方法对烟煤、无烟煤、褐煤的分选准确率均达到了98%以上,有良好的分类效果。 展开更多
关键词 煤矸识别 红外热成像 红外灰度图像 红外彩色图像 灰度均值 SVM 图像预处理
在线阅读 下载PDF
基于三维激光扫描技术的竣工盾构隧道渗漏水检测 被引量:1
18
作者 鲍艳 KIM IL BOM +2 位作者 张东亮 祝泽田 马能能 《测绘通报》 CSCD 北大核心 2024年第4期101-106,共6页
渗漏水是隧道常见的病害,长期渗漏会导致隧道结构开裂、裂缝、钢筋腐蚀,威胁到隧道运营安全,因此对其检测一直受到重视。本文利用三维激光扫描技术实现了竣工盾构隧道渗漏水的位置及面积的自动检测。首先采用架站式三维激光扫描仪采集... 渗漏水是隧道常见的病害,长期渗漏会导致隧道结构开裂、裂缝、钢筋腐蚀,威胁到隧道运营安全,因此对其检测一直受到重视。本文利用三维激光扫描技术实现了竣工盾构隧道渗漏水的位置及面积的自动检测。首先采用架站式三维激光扫描仪采集竣工隧道点云,基于修正后的反射强度值生成隧道衬砌表面灰度图,再采用膨胀法与腐蚀法对灰度图像进行预处理;然后利用连通域算法计算渗漏水位置及其面积;最后结合实际工程验证本文方法的实用性及准确性。结果表明,应用本文方法竣工隧道的渗漏水检测准确率达92%。 展开更多
关键词 渗漏水检测 盾构隧道 三维激光扫描 反射强度修正 灰度图
在线阅读 下载PDF
基于改进引导滤波算法的蜗轮齿廓边缘保持方法
19
作者 郑永 谢伟 +4 位作者 陈艳 赵化雨 张天恒 段高歆 刘宏荻 《机电工程》 CAS 北大核心 2024年第12期2152-2162,共11页
在使用机器视觉方法测量蜗轮齿距过程中,工业相机采集的蜗轮齿廓图像极易受到高斯噪声和光照不均引起的轮廓伪影的影响。针对以上问题,提出了一种基于改进引导滤波算法的蜗轮齿廓边缘保持方法。首先,对原始蜗轮齿廓图像进行了滤波处理... 在使用机器视觉方法测量蜗轮齿距过程中,工业相机采集的蜗轮齿廓图像极易受到高斯噪声和光照不均引起的轮廓伪影的影响。针对以上问题,提出了一种基于改进引导滤波算法的蜗轮齿廓边缘保持方法。首先,对原始蜗轮齿廓图像进行了滤波处理和二值化处理,滤波处理采用了改进的引导滤波算法,使用高斯函数构造权重系数替代了引导滤波算法中的均值权重系数,二值化处理使用最大类间方差进行了阈值分割;然后,对滤波后的图像与二值化图像进行了图像融合,对融合后的图像进行了拉普拉斯锐化处理;最后,进行了灰度拉伸对数变换,得到了增强后的图像,并采用实验验证了基于改进引导滤波算法的蜗轮齿廓边缘保持方法。研究结果表明:基于改进的引导滤波的蜗轮齿廓边缘保持算法在处理蜗轮齿廓边缘时,相比传统保边滤波算法,峰值信噪比可提高7.81%,图像对比度可提高43.6%,有效地增加了图像的信噪比和对比度;使用该蜗轮齿廓边缘保持算法增强后的蜗轮齿廓图像,当采用机器视觉测量其蜗轮齿距偏差时,左、右齿面单个齿距偏差为4.6μm和4.5μm,左、右齿面齿距累积偏差为16.5μm和16.6μm,测量结果均在允许的齿距偏差范围内。这说明采用蜗轮齿廓边缘保持算法增强后的蜗轮齿廓图像,去噪效果更好,蜗轮齿廓细节更清晰准确,有利于后续蜗轮齿廓特征的提取与齿距的测量。 展开更多
关键词 蜗轮齿廓图像 引导滤波 二值化 图像融合 图像锐化 灰度拉伸 图像增强
在线阅读 下载PDF
基于模糊神经网络的舰船雷达图像弱小目标检测
20
作者 张勇飞 陈涛 《舰船科学技术》 北大核心 2024年第9期147-150,共4页
舰船雷达图像信息的维度较高,导致弱小目标的关键特征难以被精准提取,降低了弱小目标检测的可靠性,因此提出一种基于模糊神经网络的舰船雷达图像弱小目标检测方法。该方法对舰船雷达图像进行背景校正,利用图像灰度值加性模型从图像中提... 舰船雷达图像信息的维度较高,导致弱小目标的关键特征难以被精准提取,降低了弱小目标检测的可靠性,因此提出一种基于模糊神经网络的舰船雷达图像弱小目标检测方法。该方法对舰船雷达图像进行背景校正,利用图像灰度值加性模型从图像中提取弱小目标。最后将提取的弱小目标输入到模糊神经网络中,输出的结果即为舰船雷达图像弱小目标检测结果。通过实验证明,在不同高斯噪声环境中,该方法能够准确地检测出雷达图像中的弱小目标,并具有较快的检测速度。 展开更多
关键词 舰船雷达图像 弱小目标检测 图像灰度值 高斯噪声
在线阅读 下载PDF
上一页 1 2 22 下一页 到第
使用帮助 返回顶部