Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties...Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties were investigated.The results showed that the cold arc process reduced splashing at the moment of liquid bridge breakage and effectively shortened the droplet transfer period.The microstructures of the deposited samples exhibited layered characteristics with alternating distributions of coarse and fine grains.During layer-by-layer deposition,the β-phase precipitated and grew preferentially along grain boundaries,while the fineη-Al_(8)Mn_(5)phase was dispersed in the α-Mg matrix.The mechanical properties of the CA-WAAM deposited sample showed isotropic characteristics.The ultimate tensile strength and elongation in the building direction(BD)were 282.7 MPa and 14.2%,respectively.The microhardness values of the deposited parts were relatively uniform,with an average value of HV 69.6.展开更多
Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads ...Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.展开更多
The muzzle blast overpressure induces disturbances in the flow field inside the crew compartment(FFICC)of a truck-mounted howitzer during the artillery firing.This overpressure is the primary factor preventing personn...The muzzle blast overpressure induces disturbances in the flow field inside the crew compartment(FFICC)of a truck-mounted howitzer during the artillery firing.This overpressure is the primary factor preventing personnel from firing artillery within the cab.To investigate the overpressure characteristics of the FFICC,a foreign trade equipment model was used as the research object,and a numerical model was established to analyze the propagation of muzzle blast from the muzzle to the interior of the crew compartment under extreme firing condition.For comparative verification,the muzzle blast experiment included overpressure data from both the flow field outside the crew compartment(FFOCC)and the FFICC,as well as the acceleration data of the crew compartment structure(Str-CC).The research findings demonstrate that the overpressure-time curves of the FFICC exhibit multi-peak characteristics,while the pressure wave shows no significant discontinuity.The enclosed nature of the cab hinders the dissipation of pressure wave energy within the FFICC,leading to sustained high-amplitude overpressure.The frameskin structure helps attenuate the impact of muzzle blast on the FFICC.Conversely,local high overpressure caused by the convex or concave features of the cab's exterior significantly amplifies the overpressure amplitude within the FFICC.展开更多
Z-DNA binding protein 1(ZBP1)has emerged as a critical player in cancer biology,functioning as a cytosolic nucleic acid sensor that triggers PANoptosis,a form of programmed cell death that integrates pyroptosis,apopto...Z-DNA binding protein 1(ZBP1)has emerged as a critical player in cancer biology,functioning as a cytosolic nucleic acid sensor that triggers PANoptosis,a form of programmed cell death that integrates pyroptosis,apoptosis,and necroptosis.Although ZBP1 was initially recognized for its role in antiviral defense,recent research has highlighted its importance in the tumor microenvironment(TME),where it is essential for suppressing tumor growth and proliferation.This review explores the multifaceted role of ZBP1 in various cancer types,emphasizing its ability to detect Z-nucleic acids and double-stranded RNAs,leading to the initiation of PANoptosis through receptorinteracting protein homotypic interaction motif(RHIM)-dependent interactions.However,the antitumor potential of ZBP1 involves adenosine deaminase RNA specific 1(ADAR1),particularly its ADAR1-P150 isoform(150 kDa),which inhibits ZBP1-mediated cell death,thereby promoting tumor progression.This has spurred interest in the development of ADAR1 inhibitors and combination therapies with US Food and Drug Administration(FDA)-approved agents such as interferon-α(IFN-α)to increase ZBP1 activity.Promising studies have demonstrated that ZBP1 regulation can significantly impact tumor suppression,particularly in necrotic tumors,where its expression is correlated with reduced tumor growth.Furthermore,oligomerization of telomeric repeat-containing RNA(TERRA)-bound ZBP1 on the mitochondrial membrane has been linked to mitochondrial antiviral signaling(MAVS)-induced interferon responses,adding another layer to the tumor-suppressive functions of ZBP1.Clinical investigations into nuclear export inhibitors(NEIs)such as KPT-330 and KPT-8602,in combination with IFN therapy,have shown potential in harnessing ZBP1 to induce PANoptosis and suppress tumor growth.Additionally,the small molecule curaxin CBL0137 has been identified as a promising agent for reversing immune checkpoint blockade(ICB)resistance by inducing Z-DNA(Z form DNA)formation and ZBP1-mediated necroptosis in tumor fibroblasts.This review consolidates recent advancements in ZBP1 research,highlighting its therapeutic potential as a target for cancer treatment and its promising role in overcoming resistance to existing therapies.展开更多
Aramid fibers,due to their relatively high inter-yarn friction,high strength,high modulus,and other characteristics,have become a typical representative of flexible anti-ballistic materials in modern warfare.Current r...Aramid fibers,due to their relatively high inter-yarn friction,high strength,high modulus,and other characteristics,have become a typical representative of flexible anti-ballistic materials in modern warfare.Current research on the anti-penetration of aramid fabrics mostly focuses unilaterally on the structure and performance of aramid fabrics or the shape and size of projectiles,with fewer studies on the coupled effect of both on ballistic performance.This study analyzes how the coupling relationship(or size effect)between the projectile and fiber bundle dimensions affects the fabric ballistic performance from a mesoscopic scale perspective.Taking plain weave aramid fabric as the research object,considering different diameter projectiles,through a large number of ballistic impact tests and numerical simulations,parameters such as ballistic limit velocity,average energy absorption of fabric,and specific energy absorption ratio(average energy absorption of fabric divided by projectile cross-sectional area)are obtained for ballistic performance analysis.The influence law of projectile size on the ballistic performance of high-performance fabrics is as follows:The relative range of fitted ballistic limit velocity at different target positions gradually decreases and then stabilizes as the projectile diameter increases,indicating that the fabric structure effect gradually disappears at a projectile diameter of 12 mm;The average ballistic limit velocity at three impact positions,P1,P2,and P3,provides the corresponding ballistic limit velocity for 1000D aramid fabric,which increases with projectile diameter but the rate of increase slows down at an inflection point,which in this study occurs where the fabric structure effect nearly disappears at a projectile diameter of 12 mm;The energy absorption ratio increases and then decreases as the projectile diameter increases from 4 mm to 20 mm,reaching a peak at the diameter of 12 mm due to the gradual disappearance of the fabric structural effect.The projectile diameter of 12 mm corresponds to the coupling size of 11.159,which provides a size design reference for the macroscopic-based continuum models of aramid plain weave fabrics.展开更多
This paper presents the design and ground verification for vision-based relative navigation systems of microsatellites,which offers a comprehensive hardware design solution and a robust experimental verification metho...This paper presents the design and ground verification for vision-based relative navigation systems of microsatellites,which offers a comprehensive hardware design solution and a robust experimental verification methodology for practical implementation of vision-based navigation technology on the microsatellite platform.Firstly,a low power consumption,light weight,and high performance vision-based relative navigation optical sensor is designed.Subsequently,a set of ground verification system is designed for the hardware-in-the-loop testing of the vision-based relative navigation systems.Finally,the designed vision-based relative navigation optical sensor and the proposed angles-only navigation algorithms are tested on the ground verification system.The results verify that the optical simulator after geometrical calibration can meet the requirements of the hardware-in-the-loop testing of vision-based relative navigation systems.Based on experimental results,the relative position accuracy of the angles-only navigation filter at terminal time is increased by 25.5%,and the relative speed accuracy is increased by 31.3% compared with those of optical simulator before geometrical calibration.展开更多
RBOE is a new type of DNAN-based high-energy melt-cast mixed explosive,whose safety under thermal stimulation is significantly affected by heating conditions and venting area of the warhead.Based on the thermal decomp...RBOE is a new type of DNAN-based high-energy melt-cast mixed explosive,whose safety under thermal stimulation is significantly affected by heating conditions and venting area of the warhead.Based on the thermal decomposition reaction characteristics and combustion characteristics of each component of RBOE explosive,the cook-off calculation models of RBOE warhead before and after ignition were established.In addition,closed and vented warheads were designed,as well as fast and slow cook-off test devices.The cook-off characteristics and thermal safety venting area of RBOE warhead were extensively studied.The results showed that the closed RBOE warhead underwent deflagration reaction under both slow and fast cook-off conditions.The calculation result of the shell wall temperature before slow cookoff ignition response of the warhead was 454.06 K,with an error of+1.75%compared to the test result of462.15 K,and the temperature rise rate calculated was in good agreement with the test.The calculated ignition time of RBOE warhead under fast cook-off was 161 s,with an error of+8.8%compared to the test result of 148 s,which verified the accuracy of cook-off model of RBOE warhead before ignition.According to the cook-off calculation model of the warhead after ignition and cook-off test of the vented warhead,it was determined that the thermal safety venting area was 1124.61 mm^(2)for fast cook-off and 530.66 mm~2 for slow cook-off,effectively preventing the reaction of warhead above combustion.Therefore,this study provides a scientific basis for the thermal safety design and evaluation of insensitive warheads.展开更多
The present study introduces a screw-pressing charging method to tackle deficiencies in automation and charge uniformity during the melt-casting of polymer-based energetic materials.To ensure the safety of the experim...The present study introduces a screw-pressing charging method to tackle deficiencies in automation and charge uniformity during the melt-casting of polymer-based energetic materials.To ensure the safety of the experiments,this study used inert materials with similar physical properties to partially substitute for the actual energetic components in the preparation of simulant materials.By thoroughly analyzing slurry physical properties,a simulation framework and an extensive performance evaluation method were developed.Such tools guide the design of the structure and configuration of process parameters.Results demonstrate that employing the Pin element significantly enhances radial mixing within the screw,minimizes temperature variations in the slurry,and improves both efficiency and safety in the mixing process.Further,adjustments such as widening the cone angle of the barrel,modifying the solid content of the slurry,and varying the speed of the screw can optimize the mechanical and thermal coupling in the flow field.These adjustments promote higher-quality slurry and create a safer production environment for the extrusion process.展开更多
Inelastic collisions are the dominant cause of energy loss in radiotherapy.In the energy range around the Bragg peak,single ionization(SI)and single-electron capture(SC)are the primary inelastic collisions that lead t...Inelastic collisions are the dominant cause of energy loss in radiotherapy.In the energy range around the Bragg peak,single ionization(SI)and single-electron capture(SC)are the primary inelastic collisions that lead to energy loss.This study employs the classical trajectory Monte Carlo method to study the SI and SC processes of H_(2)O molecules using He^(2+) and C^(6+) projectiles in the energy range of 10 keV/u to 10 MeV/u.The total cross sections,single differential cross sections,impact parameter dependence of SI and SC,and fragmentation cross sections were investigated.Results illustrate that the cross section for SI is the highest when the projectile energy is close to the Bragg peak energy.When the projectile energy is below the Bragg peak energy,the ionized electrons in the forward direction dominate,and the removal of electrons can be associated with large impact parameters.As the projectile energy increases,the emission angle of the electrons gradually transitions from small angles(60°~120°)to large angles(60°~120°),and the removal of electrons is associated with small impact parameters.The energy distributions of the ionized electron are similar when the projectile energy is equal to,below or above the Bragg peak energy.The fragmentation cross sections after SI and SC in the energy range around the Bragg peak were also estimated.展开更多
BACKGROUND:Rapid and accurate identification of high-risk patients in the emergency departments(EDs)is crucial for optimizing resource allocation and improving patient outcomes.This study aimed to develop an early pre...BACKGROUND:Rapid and accurate identification of high-risk patients in the emergency departments(EDs)is crucial for optimizing resource allocation and improving patient outcomes.This study aimed to develop an early prediction model for identifying high-risk patients in EDs using initial vital sign measurements.METHODS:This retrospective cohort study analyzed initial vital signs from the Chinese Emergency Triage,Assessment,and Treatment(CETAT)database,which was collected between January 1^(st),2020,and June 25^(th),2023.The primary outcome was the identification of high-risk patients needing immediate treatment.Various machine learning methods,including a deep-learningbased multilayer perceptron(MLP)classifier were evaluated.Model performance was assessed using the area under the receiver operating characteristic curve(AUC-ROC).AUC-ROC values were reported for three scenarios:a default case,a scenario requiring sensitivity greater than 0.8(Scenario I),and a scenario requiring specificity greater than 0.8(Scenario II).SHAP values were calculated to determine the importance of each predictor within the MLP model.RESULTS:A total of 38,797 patients were analyzed,of whom 18.2%were identified as high-risk.Comparative analysis of the predictive models for high-risk patients showed AUC-ROC values ranging from 0.717 to 0.738,with the MLP model outperforming logistic regression(LR),Gaussian Naive Bayes(GNB),and the National Early Warning Score(NEWS).SHAP value analysis identified coma state,peripheral capillary oxygen saturation(SpO_(2)),and systolic blood pressure as the top three predictive factors in the MLP model,with coma state exerting the most contribution.CONCLUSION:Compared with other methods,the MLP model with initial vital signs demonstrated optimal prediction accuracy,highlighting its potential to enhance clinical decision-making in triage in the EDs.展开更多
To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to succe...To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.展开更多
Purpose: The process of scientific literature use can be regarded as that of knowledge transfer. With the help of the knowledge transfer theory and data from scientific literature databases, we explored the behavior o...Purpose: The process of scientific literature use can be regarded as that of knowledge transfer. With the help of the knowledge transfer theory and data from scientific literature databases, we explored the behavior of scientific researchers during their scholarly communication, and studied the factors that influenced the behavior of researchers under network environment. Design/methodology/approach: Based on the literature databases of CNKI, Elsevier Science Direct and Springer Link, we used the knowledge transfer theory to construct a model for describing the scholarly communication process, which attempts to find out factors that may influence the communication behavior of researchers. With a focus laid on the absorption behavior of researchers during the knowledge acceptance process, we defined the independent variables of the model and proposed hypotheses on the basis of a comprehensive literature study. Afterwards, college students were invited to participate in a questionnaire survey, which was designed to prove our research model and hypotheses.Findings: Our results showed that during the scholarly communication, it is not the professional knowledge, but the ability and willingness for knowledge acceptance, organizations’ importance and internal atmosphere as well as knowledge authority and relevance that have played a positive significant role in the knowledge transfer performance. In addition, our distance indicators showed that knowledge distance and knowledge transfer performance have significant negative correlations. Research limitations: This study is mainly based on a questionnaire survey of college students, which may limit the generalization of our research results. In addition, more resource types need be considered for further studies.Practical implications: Under network environment, scholarly communication performance based on knowledge transfer theory could greatly contribute to the enrichment of the contentof the knowledge transfer theory, and stretch out the range of the field. In addition, our result could help commercial scientific database providers to learn more about the users’ needs, which would not only benefit both scientific communities and content providers, but also promote scholarly communication effectively. Originality/value: Compared with existing researches which mainly emphasized the model construction of scholarly communication, our study focused the knowledge relevance during the scholarly communication and influence factors that impacted on the performance of knowledge acceptance under the network environment, which could provide helpful guides for further studies.展开更多
Emergency publication provides immediate evidence to support responses to crises and scientific development of public health policy.This is an important manifestation of national governance.During the COVID-19 pandemi...Emergency publication provides immediate evidence to support responses to crises and scientific development of public health policy.This is an important manifestation of national governance.During the COVID-19 pandemic,scientific journals become vital disseminators and played a crucial role in emergency publishing.Establishing a scientific emergency publication system is a prerequisite for timely publishing during emergencies.We used a literature review and questionnaire survey to explore how scientific journals in China established an emergency publication system.Against the background of emergency publication during COVID-19,we analyzed the sources of manuscripts,speed of publication,dissemination routes and influence of 276 scientific journals.The emergency publication route was mainly used for research articles.The audience for these articles are scientific researchers,healthcare workers,teachers,and college students in related fields.Most scientific journals do not follow serious public health emergencies closely enough,and their response tends to lag behind.Setting up fast paths and special columns,and using preprint platforms,will improve the ability to publish more rapidly during emergencies.New media also play an important role in emergency publications.However,the influence of emergency publications in scientific journals in China still needs to be improved.China's scientific journals need to further strengthen the systematic emergency publishing system.They should promote open access to epidemic-related papers,carry out pilot demonstrations of emergency publishing and create an emergency publishing platform.They should also follow developing trends for media integration and innovate new ways to disseminate the findings of emergency publications.展开更多
Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The ...Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.展开更多
A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevaryin...A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.展开更多
This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double...This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.展开更多
Since backlash nonlinearity is inevitably existing in actuators for bidirectional stabilization system of allelectric tank,it behaves more drastically in high maneuvering environments.In this work,the accurate trackin...Since backlash nonlinearity is inevitably existing in actuators for bidirectional stabilization system of allelectric tank,it behaves more drastically in high maneuvering environments.In this work,the accurate tracking control for bidirectional stabilization system of moving all-electric tank with actuator backlash and unmodeled disturbance is solved.By utilizing the smooth adaptive backlash inverse model,a nonlinear robust adaptive feedback control scheme is presented.The unknown parameters and unmodelled disturbance are addressed separately through the derived parametric adaptive function and the continuous nonlinear robust term.Because the unknown backlash parameters are updated via adaptive function and the backlash effect can be suppressed successfully by inverse operation,which ensures the system stability.Meanwhile,the system disturbance in the high maneuverable environment can be estimated with the constructed adaptive law online improving the engineering practicality.Finally,Lyapunov-based analysis proves that the developed controller can ensure the tracking error asymptotically converges to zero even with unmodeled disturbance and unknown actuator backlash.Contrast co-simulations and experiments illustrate the advantages of the proposed approach.展开更多
The gun-track launch system is a new special launch device that connects the track outside the muzzle.Because it is constrained by the track,the characteristics of development of the muzzle jet differ from those of th...The gun-track launch system is a new special launch device that connects the track outside the muzzle.Because it is constrained by the track,the characteristics of development of the muzzle jet differ from those of the traditional muzzle jet.Specifically,it changes from freely developing to doing so in a constrained manner,where this results in an asymmetric direction of flow as well as spatio-temporal coupling-induced interference between various shock waves and the formation of vortices.In this background,the authors of this article formulate and consider the development and characteristics of evolution of the muzzle jet as it impacts a constrained moving body.We designed simulations to test the gun-track launch system,and established a numerical model based on the dynamic grid method to explore the development and characteristics of propagation of disturbances when the muzzle jet impacted a constrained moving body.We also considered models without a constrained track for the sake of comparison.The results showed that the muzzle jet assumed a circumferential asymmetric shape,and tended to develop in the area above the muzzle.Because the test platform was close to the ground,the muzzle jet was subjected to reflections from it that enhanced the development and evolution of various forms of shock waves and vortices in the muzzle jet to exacerbate its rate of distortion and asymmetric characteristics.This in turn led to significant differences in the changes in pressure at symmetric points that would otherwise have been identical.The results of a comparative analysis showed that the constrained track could hinder the influence of reflections from the ground on the muzzle jet to some extent,and could reduce the velocity of the shock waves inducing the motion of the muzzle as well as the Mach number of the moving body.The work here provides a theoretical basis and the requisite technical support for applications of the gun-track launch system.It also sheds light on the technical bottlenecks that need to be considered to recover high-value warheads.展开更多
To improve the hit probability of tank at high speed,a prediction method of projectile-target intersection based on adaptive robust constraint-following control and interval uncertainty analysis is proposed.The method...To improve the hit probability of tank at high speed,a prediction method of projectile-target intersection based on adaptive robust constraint-following control and interval uncertainty analysis is proposed.The method proposed provides a novel way to predict the impact point of projectile for moving tank.First,bidirectional stability constraints and stability constraint-following error are constructed using the Udwadia-Kalaba theory,and an adaptive robust constraint-following controller is designed considering uncertainties.Second,the exterior ballistic ordinary differential equation with uncertainties is integrated into the controller,and the pointing control of stability system is extended to the impact-point control of projectile.Third,based on the interval uncertainty analysis method combining Chebyshev polynomial expansion and affine arithmetic,a prediction method of projectile-target intersection is proposed.Finally,the co-simulation experiment is performed by establishing the multi-body system dynamic model of tank and mathematical model of control system.The results demonstrate that the prediction method of projectile-target intersection based on uncertainty analysis can effectively decrease the uncertainties of system,improve the prediction accuracy,and increase the hit probability.The adaptive robust constraint-following control can effectively restrain the uncertainties caused by road excitation and model error.展开更多
Coral sandy soils widely exist in coral island reefs and seashores in tropical and subtropical regions.Due to the unique marine depositional environment of coral sandy soils,the engineering characteristics and respons...Coral sandy soils widely exist in coral island reefs and seashores in tropical and subtropical regions.Due to the unique marine depositional environment of coral sandy soils,the engineering characteristics and responses of these soils subjected to monotonic and cyclic loadings have been a subject of intense interest among the geotechnical and earthquake engineering communities.This paper critically reviews the progress of experimental investigations on the undrained behavior of coral sandy soils under monotonic and cyclic loadings over the last three decades.The focus of coverage includes the contractive-dilative behavior,the pattern of excess pore-water pressure(EPWP)generation and the liquefaction mechanism and liquefaction resistance,the small-strain shear modulus and strain-dependent shear modulus and damping,the cyclic softening feature,and the anisotropic characteristics of undrained responses of saturated coral sandy soils.In particular,the advances made in the past decades are reviewed from the following aspects:(1)the characterization of factors that impact the mechanism and patterns of EPWP build-up;(2)the identification of liquefaction triggering in terms of the apparent viscosity and the average flow coefficient;(3)the establishment of the invariable form of strain-based,stress-based,or energy-based EPWP ratio formulas and the unique relationship between the new proxy of liquefaction resistance and the number of cycles required to reach liquefaction;(4)the establishment of the invariable form of the predictive formulas of small strain modulus and strain-dependent shear modulus;and(5)the investigation on the effects of stress-induced anisotropy on liquefaction susceptibility and dynamic deformation characteristics.Insights gained through the critical review of these advances in the past decades offer a perspective for future research to further resolve the fundamental issues concerning the liquefaction mechanism and responses of coral sandy sites subjected to cyclic loadings associated with seismic events in marine environments.展开更多
基金supported by the National Natural Science Foundation of China(No.51805265)the Fundamental Research Funds for the Central Universities,China(No.30922010921).
文摘Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties were investigated.The results showed that the cold arc process reduced splashing at the moment of liquid bridge breakage and effectively shortened the droplet transfer period.The microstructures of the deposited samples exhibited layered characteristics with alternating distributions of coarse and fine grains.During layer-by-layer deposition,the β-phase precipitated and grew preferentially along grain boundaries,while the fineη-Al_(8)Mn_(5)phase was dispersed in the α-Mg matrix.The mechanical properties of the CA-WAAM deposited sample showed isotropic characteristics.The ultimate tensile strength and elongation in the building direction(BD)were 282.7 MPa and 14.2%,respectively.The microhardness values of the deposited parts were relatively uniform,with an average value of HV 69.6.
基金financially supported by National Natural Science Foundation of China(Grant Nos.52378401,52278504)the Fundamental Research Funds for the Central Universities(Grant No.30922010918)。
文摘Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.
基金supported by the National Natural Science Foundation of China(Grant No.U2341269)。
文摘The muzzle blast overpressure induces disturbances in the flow field inside the crew compartment(FFICC)of a truck-mounted howitzer during the artillery firing.This overpressure is the primary factor preventing personnel from firing artillery within the cab.To investigate the overpressure characteristics of the FFICC,a foreign trade equipment model was used as the research object,and a numerical model was established to analyze the propagation of muzzle blast from the muzzle to the interior of the crew compartment under extreme firing condition.For comparative verification,the muzzle blast experiment included overpressure data from both the flow field outside the crew compartment(FFOCC)and the FFICC,as well as the acceleration data of the crew compartment structure(Str-CC).The research findings demonstrate that the overpressure-time curves of the FFICC exhibit multi-peak characteristics,while the pressure wave shows no significant discontinuity.The enclosed nature of the cab hinders the dissipation of pressure wave energy within the FFICC,leading to sustained high-amplitude overpressure.The frameskin structure helps attenuate the impact of muzzle blast on the FFICC.Conversely,local high overpressure caused by the convex or concave features of the cab's exterior significantly amplifies the overpressure amplitude within the FFICC.
基金supported by the National Natural Science Foundation of China under Grant 22376100.
文摘Z-DNA binding protein 1(ZBP1)has emerged as a critical player in cancer biology,functioning as a cytosolic nucleic acid sensor that triggers PANoptosis,a form of programmed cell death that integrates pyroptosis,apoptosis,and necroptosis.Although ZBP1 was initially recognized for its role in antiviral defense,recent research has highlighted its importance in the tumor microenvironment(TME),where it is essential for suppressing tumor growth and proliferation.This review explores the multifaceted role of ZBP1 in various cancer types,emphasizing its ability to detect Z-nucleic acids and double-stranded RNAs,leading to the initiation of PANoptosis through receptorinteracting protein homotypic interaction motif(RHIM)-dependent interactions.However,the antitumor potential of ZBP1 involves adenosine deaminase RNA specific 1(ADAR1),particularly its ADAR1-P150 isoform(150 kDa),which inhibits ZBP1-mediated cell death,thereby promoting tumor progression.This has spurred interest in the development of ADAR1 inhibitors and combination therapies with US Food and Drug Administration(FDA)-approved agents such as interferon-α(IFN-α)to increase ZBP1 activity.Promising studies have demonstrated that ZBP1 regulation can significantly impact tumor suppression,particularly in necrotic tumors,where its expression is correlated with reduced tumor growth.Furthermore,oligomerization of telomeric repeat-containing RNA(TERRA)-bound ZBP1 on the mitochondrial membrane has been linked to mitochondrial antiviral signaling(MAVS)-induced interferon responses,adding another layer to the tumor-suppressive functions of ZBP1.Clinical investigations into nuclear export inhibitors(NEIs)such as KPT-330 and KPT-8602,in combination with IFN therapy,have shown potential in harnessing ZBP1 to induce PANoptosis and suppress tumor growth.Additionally,the small molecule curaxin CBL0137 has been identified as a promising agent for reversing immune checkpoint blockade(ICB)resistance by inducing Z-DNA(Z form DNA)formation and ZBP1-mediated necroptosis in tumor fibroblasts.This review consolidates recent advancements in ZBP1 research,highlighting its therapeutic potential as a target for cancer treatment and its promising role in overcoming resistance to existing therapies.
基金National Natural Science Foundation of China(Grant Nos.12172179,11802141 and U2341244)National Natural Science Foundation for Young Scientists of China(Grant No.12202207)+3 种基金China Postdoctoral Science Foundation(Grant No.2022M711623)Natural Science Foundation of Jiangsu Province(Grant No.BK20220968)Open Funds for Key Laboratory of Impact and Safety Engineering(Ningbo University),Ministry of Education(Grant No.CJ202201)Open Funds for Shock and Vibration of Engineering Materials and Structures Key Laboratory of Sichuan Province(Grant No.22kfgk03)。
文摘Aramid fibers,due to their relatively high inter-yarn friction,high strength,high modulus,and other characteristics,have become a typical representative of flexible anti-ballistic materials in modern warfare.Current research on the anti-penetration of aramid fabrics mostly focuses unilaterally on the structure and performance of aramid fabrics or the shape and size of projectiles,with fewer studies on the coupled effect of both on ballistic performance.This study analyzes how the coupling relationship(or size effect)between the projectile and fiber bundle dimensions affects the fabric ballistic performance from a mesoscopic scale perspective.Taking plain weave aramid fabric as the research object,considering different diameter projectiles,through a large number of ballistic impact tests and numerical simulations,parameters such as ballistic limit velocity,average energy absorption of fabric,and specific energy absorption ratio(average energy absorption of fabric divided by projectile cross-sectional area)are obtained for ballistic performance analysis.The influence law of projectile size on the ballistic performance of high-performance fabrics is as follows:The relative range of fitted ballistic limit velocity at different target positions gradually decreases and then stabilizes as the projectile diameter increases,indicating that the fabric structure effect gradually disappears at a projectile diameter of 12 mm;The average ballistic limit velocity at three impact positions,P1,P2,and P3,provides the corresponding ballistic limit velocity for 1000D aramid fabric,which increases with projectile diameter but the rate of increase slows down at an inflection point,which in this study occurs where the fabric structure effect nearly disappears at a projectile diameter of 12 mm;The energy absorption ratio increases and then decreases as the projectile diameter increases from 4 mm to 20 mm,reaching a peak at the diameter of 12 mm due to the gradual disappearance of the fabric structural effect.The projectile diameter of 12 mm corresponds to the coupling size of 11.159,which provides a size design reference for the macroscopic-based continuum models of aramid plain weave fabrics.
基金supported in part by the Doctoral Initiation Fund of Nanchang Hangkong University(No.EA202403107)Jiangxi Province Early Career Youth Science and Technology Talent Training Project(No.CK202403509).
文摘This paper presents the design and ground verification for vision-based relative navigation systems of microsatellites,which offers a comprehensive hardware design solution and a robust experimental verification methodology for practical implementation of vision-based navigation technology on the microsatellite platform.Firstly,a low power consumption,light weight,and high performance vision-based relative navigation optical sensor is designed.Subsequently,a set of ground verification system is designed for the hardware-in-the-loop testing of the vision-based relative navigation systems.Finally,the designed vision-based relative navigation optical sensor and the proposed angles-only navigation algorithms are tested on the ground verification system.The results verify that the optical simulator after geometrical calibration can meet the requirements of the hardware-in-the-loop testing of vision-based relative navigation systems.Based on experimental results,the relative position accuracy of the angles-only navigation filter at terminal time is increased by 25.5%,and the relative speed accuracy is increased by 31.3% compared with those of optical simulator before geometrical calibration.
基金National Natural Science Foundation of china(Grant No.12402468)。
文摘RBOE is a new type of DNAN-based high-energy melt-cast mixed explosive,whose safety under thermal stimulation is significantly affected by heating conditions and venting area of the warhead.Based on the thermal decomposition reaction characteristics and combustion characteristics of each component of RBOE explosive,the cook-off calculation models of RBOE warhead before and after ignition were established.In addition,closed and vented warheads were designed,as well as fast and slow cook-off test devices.The cook-off characteristics and thermal safety venting area of RBOE warhead were extensively studied.The results showed that the closed RBOE warhead underwent deflagration reaction under both slow and fast cook-off conditions.The calculation result of the shell wall temperature before slow cookoff ignition response of the warhead was 454.06 K,with an error of+1.75%compared to the test result of462.15 K,and the temperature rise rate calculated was in good agreement with the test.The calculated ignition time of RBOE warhead under fast cook-off was 161 s,with an error of+8.8%compared to the test result of 148 s,which verified the accuracy of cook-off model of RBOE warhead before ignition.According to the cook-off calculation model of the warhead after ignition and cook-off test of the vented warhead,it was determined that the thermal safety venting area was 1124.61 mm^(2)for fast cook-off and 530.66 mm~2 for slow cook-off,effectively preventing the reaction of warhead above combustion.Therefore,this study provides a scientific basis for the thermal safety design and evaluation of insensitive warheads.
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant No.30923011018)。
文摘The present study introduces a screw-pressing charging method to tackle deficiencies in automation and charge uniformity during the melt-casting of polymer-based energetic materials.To ensure the safety of the experiments,this study used inert materials with similar physical properties to partially substitute for the actual energetic components in the preparation of simulant materials.By thoroughly analyzing slurry physical properties,a simulation framework and an extensive performance evaluation method were developed.Such tools guide the design of the structure and configuration of process parameters.Results demonstrate that employing the Pin element significantly enhances radial mixing within the screw,minimizes temperature variations in the slurry,and improves both efficiency and safety in the mixing process.Further,adjustments such as widening the cone angle of the barrel,modifying the solid content of the slurry,and varying the speed of the screw can optimize the mechanical and thermal coupling in the flow field.These adjustments promote higher-quality slurry and create a safer production environment for the extrusion process.
基金supported in part by the National Natural Science Foundation of China(Nos.12105327 and 11775108)the Hunan Provincial Innovation Foundation For Postgraduate(No.QL20220210)the Advanced Energy Science and Technology Guangdong Laboratory.
文摘Inelastic collisions are the dominant cause of energy loss in radiotherapy.In the energy range around the Bragg peak,single ionization(SI)and single-electron capture(SC)are the primary inelastic collisions that lead to energy loss.This study employs the classical trajectory Monte Carlo method to study the SI and SC processes of H_(2)O molecules using He^(2+) and C^(6+) projectiles in the energy range of 10 keV/u to 10 MeV/u.The total cross sections,single differential cross sections,impact parameter dependence of SI and SC,and fragmentation cross sections were investigated.Results illustrate that the cross section for SI is the highest when the projectile energy is close to the Bragg peak energy.When the projectile energy is below the Bragg peak energy,the ionized electrons in the forward direction dominate,and the removal of electrons can be associated with large impact parameters.As the projectile energy increases,the emission angle of the electrons gradually transitions from small angles(60°~120°)to large angles(60°~120°),and the removal of electrons is associated with small impact parameters.The energy distributions of the ionized electron are similar when the projectile energy is equal to,below or above the Bragg peak energy.The fragmentation cross sections after SI and SC in the energy range around the Bragg peak were also estimated.
基金Applicable Funding Source University of Science and Technology of China(to YLL)National Natural Science Foundation of China(12126604)(to MPZ)+1 种基金R&D project of Pazhou Lab(Huangpu)(2023K0609)(to MPZ)Anhui Provincial Natural Science(grant number 2208085MH235)(to KJ)。
文摘BACKGROUND:Rapid and accurate identification of high-risk patients in the emergency departments(EDs)is crucial for optimizing resource allocation and improving patient outcomes.This study aimed to develop an early prediction model for identifying high-risk patients in EDs using initial vital sign measurements.METHODS:This retrospective cohort study analyzed initial vital signs from the Chinese Emergency Triage,Assessment,and Treatment(CETAT)database,which was collected between January 1^(st),2020,and June 25^(th),2023.The primary outcome was the identification of high-risk patients needing immediate treatment.Various machine learning methods,including a deep-learningbased multilayer perceptron(MLP)classifier were evaluated.Model performance was assessed using the area under the receiver operating characteristic curve(AUC-ROC).AUC-ROC values were reported for three scenarios:a default case,a scenario requiring sensitivity greater than 0.8(Scenario I),and a scenario requiring specificity greater than 0.8(Scenario II).SHAP values were calculated to determine the importance of each predictor within the MLP model.RESULTS:A total of 38,797 patients were analyzed,of whom 18.2%were identified as high-risk.Comparative analysis of the predictive models for high-risk patients showed AUC-ROC values ranging from 0.717 to 0.738,with the MLP model outperforming logistic regression(LR),Gaussian Naive Bayes(GNB),and the National Early Warning Score(NEWS).SHAP value analysis identified coma state,peripheral capillary oxygen saturation(SpO_(2)),and systolic blood pressure as the top three predictive factors in the MLP model,with coma state exerting the most contribution.CONCLUSION:Compared with other methods,the MLP model with initial vital signs demonstrated optimal prediction accuracy,highlighting its potential to enhance clinical decision-making in triage in the EDs.
基金supported by the National Natural Science Foundation of China (Grant No.22005143)Young Elite Scientists Sponsorship Program by CAST (Grant No.2022QNRC001)。
文摘To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.
基金jointly supported by the National Natural Science Foundation of China(Grant No:71373124)Assemble Technology Infrastructure Projects(Grant No.QTQNJ20121QB04)
文摘Purpose: The process of scientific literature use can be regarded as that of knowledge transfer. With the help of the knowledge transfer theory and data from scientific literature databases, we explored the behavior of scientific researchers during their scholarly communication, and studied the factors that influenced the behavior of researchers under network environment. Design/methodology/approach: Based on the literature databases of CNKI, Elsevier Science Direct and Springer Link, we used the knowledge transfer theory to construct a model for describing the scholarly communication process, which attempts to find out factors that may influence the communication behavior of researchers. With a focus laid on the absorption behavior of researchers during the knowledge acceptance process, we defined the independent variables of the model and proposed hypotheses on the basis of a comprehensive literature study. Afterwards, college students were invited to participate in a questionnaire survey, which was designed to prove our research model and hypotheses.Findings: Our results showed that during the scholarly communication, it is not the professional knowledge, but the ability and willingness for knowledge acceptance, organizations’ importance and internal atmosphere as well as knowledge authority and relevance that have played a positive significant role in the knowledge transfer performance. In addition, our distance indicators showed that knowledge distance and knowledge transfer performance have significant negative correlations. Research limitations: This study is mainly based on a questionnaire survey of college students, which may limit the generalization of our research results. In addition, more resource types need be considered for further studies.Practical implications: Under network environment, scholarly communication performance based on knowledge transfer theory could greatly contribute to the enrichment of the contentof the knowledge transfer theory, and stretch out the range of the field. In addition, our result could help commercial scientific database providers to learn more about the users’ needs, which would not only benefit both scientific communities and content providers, but also promote scholarly communication effectively. Originality/value: Compared with existing researches which mainly emphasized the model construction of scholarly communication, our study focused the knowledge relevance during the scholarly communication and influence factors that impacted on the performance of knowledge acceptance under the network environment, which could provide helpful guides for further studies.
文摘Emergency publication provides immediate evidence to support responses to crises and scientific development of public health policy.This is an important manifestation of national governance.During the COVID-19 pandemic,scientific journals become vital disseminators and played a crucial role in emergency publishing.Establishing a scientific emergency publication system is a prerequisite for timely publishing during emergencies.We used a literature review and questionnaire survey to explore how scientific journals in China established an emergency publication system.Against the background of emergency publication during COVID-19,we analyzed the sources of manuscripts,speed of publication,dissemination routes and influence of 276 scientific journals.The emergency publication route was mainly used for research articles.The audience for these articles are scientific researchers,healthcare workers,teachers,and college students in related fields.Most scientific journals do not follow serious public health emergencies closely enough,and their response tends to lag behind.Setting up fast paths and special columns,and using preprint platforms,will improve the ability to publish more rapidly during emergencies.New media also play an important role in emergency publications.However,the influence of emergency publications in scientific journals in China still needs to be improved.China's scientific journals need to further strengthen the systematic emergency publishing system.They should promote open access to epidemic-related papers,carry out pilot demonstrations of emergency publishing and create an emergency publishing platform.They should also follow developing trends for media integration and innovate new ways to disseminate the findings of emergency publications.
基金supported by the Fundamental Research Funds for the Central Universities (Grant No. AE89991/403)National Natural Science Foundation of China (Grant No. 52005262)+1 种基金Natural Science Foundation of Jiangsu Province (BK20202007)National Key Research and Development Program of China (2022YFB4600800)。
文摘Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.
基金supported in part by the Nation Natural Science Foundation of China under Grant No.52175099China Postdoctoral Science Foundation under Grant No.2020M671494Jiangsu Planned Projects for Postdoctoral Research Funds under Grant No.2020Z179。
文摘A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.
基金funded by the China Postdoctoral Science Foundation(Grant No.2022M721614)the opening project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(Grant No.KFJJ23-07M)。
文摘This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.
基金the National Natural Science Foundation of China(No.52275062)and(No.52075262).
文摘Since backlash nonlinearity is inevitably existing in actuators for bidirectional stabilization system of allelectric tank,it behaves more drastically in high maneuvering environments.In this work,the accurate tracking control for bidirectional stabilization system of moving all-electric tank with actuator backlash and unmodeled disturbance is solved.By utilizing the smooth adaptive backlash inverse model,a nonlinear robust adaptive feedback control scheme is presented.The unknown parameters and unmodelled disturbance are addressed separately through the derived parametric adaptive function and the continuous nonlinear robust term.Because the unknown backlash parameters are updated via adaptive function and the backlash effect can be suppressed successfully by inverse operation,which ensures the system stability.Meanwhile,the system disturbance in the high maneuverable environment can be estimated with the constructed adaptive law online improving the engineering practicality.Finally,Lyapunov-based analysis proves that the developed controller can ensure the tracking error asymptotically converges to zero even with unmodeled disturbance and unknown actuator backlash.Contrast co-simulations and experiments illustrate the advantages of the proposed approach.
文摘The gun-track launch system is a new special launch device that connects the track outside the muzzle.Because it is constrained by the track,the characteristics of development of the muzzle jet differ from those of the traditional muzzle jet.Specifically,it changes from freely developing to doing so in a constrained manner,where this results in an asymmetric direction of flow as well as spatio-temporal coupling-induced interference between various shock waves and the formation of vortices.In this background,the authors of this article formulate and consider the development and characteristics of evolution of the muzzle jet as it impacts a constrained moving body.We designed simulations to test the gun-track launch system,and established a numerical model based on the dynamic grid method to explore the development and characteristics of propagation of disturbances when the muzzle jet impacted a constrained moving body.We also considered models without a constrained track for the sake of comparison.The results showed that the muzzle jet assumed a circumferential asymmetric shape,and tended to develop in the area above the muzzle.Because the test platform was close to the ground,the muzzle jet was subjected to reflections from it that enhanced the development and evolution of various forms of shock waves and vortices in the muzzle jet to exacerbate its rate of distortion and asymmetric characteristics.This in turn led to significant differences in the changes in pressure at symmetric points that would otherwise have been identical.The results of a comparative analysis showed that the constrained track could hinder the influence of reflections from the ground on the muzzle jet to some extent,and could reduce the velocity of the shock waves inducing the motion of the muzzle as well as the Mach number of the moving body.The work here provides a theoretical basis and the requisite technical support for applications of the gun-track launch system.It also sheds light on the technical bottlenecks that need to be considered to recover high-value warheads.
基金financially supported by the National Natural Science Foundation of China(Grant 52175099)the China Postdoctoral Science Foundation(Grant No.2020M671494)+1 种基金the Jiangsu Planned Projects for Postdoctoral Research Funds(Grant No.2020Z179)the Nanjing University of Science and Technology Independent Research Program(Grant No.30920021105)。
文摘To improve the hit probability of tank at high speed,a prediction method of projectile-target intersection based on adaptive robust constraint-following control and interval uncertainty analysis is proposed.The method proposed provides a novel way to predict the impact point of projectile for moving tank.First,bidirectional stability constraints and stability constraint-following error are constructed using the Udwadia-Kalaba theory,and an adaptive robust constraint-following controller is designed considering uncertainties.Second,the exterior ballistic ordinary differential equation with uncertainties is integrated into the controller,and the pointing control of stability system is extended to the impact-point control of projectile.Third,based on the interval uncertainty analysis method combining Chebyshev polynomial expansion and affine arithmetic,a prediction method of projectile-target intersection is proposed.Finally,the co-simulation experiment is performed by establishing the multi-body system dynamic model of tank and mathematical model of control system.The results demonstrate that the prediction method of projectile-target intersection based on uncertainty analysis can effectively decrease the uncertainties of system,improve the prediction accuracy,and increase the hit probability.The adaptive robust constraint-following control can effectively restrain the uncertainties caused by road excitation and model error.
基金National Natural Science Foundation of China under Grant No.52278503。
文摘Coral sandy soils widely exist in coral island reefs and seashores in tropical and subtropical regions.Due to the unique marine depositional environment of coral sandy soils,the engineering characteristics and responses of these soils subjected to monotonic and cyclic loadings have been a subject of intense interest among the geotechnical and earthquake engineering communities.This paper critically reviews the progress of experimental investigations on the undrained behavior of coral sandy soils under monotonic and cyclic loadings over the last three decades.The focus of coverage includes the contractive-dilative behavior,the pattern of excess pore-water pressure(EPWP)generation and the liquefaction mechanism and liquefaction resistance,the small-strain shear modulus and strain-dependent shear modulus and damping,the cyclic softening feature,and the anisotropic characteristics of undrained responses of saturated coral sandy soils.In particular,the advances made in the past decades are reviewed from the following aspects:(1)the characterization of factors that impact the mechanism and patterns of EPWP build-up;(2)the identification of liquefaction triggering in terms of the apparent viscosity and the average flow coefficient;(3)the establishment of the invariable form of strain-based,stress-based,or energy-based EPWP ratio formulas and the unique relationship between the new proxy of liquefaction resistance and the number of cycles required to reach liquefaction;(4)the establishment of the invariable form of the predictive formulas of small strain modulus and strain-dependent shear modulus;and(5)the investigation on the effects of stress-induced anisotropy on liquefaction susceptibility and dynamic deformation characteristics.Insights gained through the critical review of these advances in the past decades offer a perspective for future research to further resolve the fundamental issues concerning the liquefaction mechanism and responses of coral sandy sites subjected to cyclic loadings associated with seismic events in marine environments.
