Laser assisted turning （LAT） is one of the advanced machining technologies, which uses laser power to heat the surface of a workpiece before the material is removed. It has several advantages of low manufacturing co...Laser assisted turning （LAT） is one of the advanced machining technologies, which uses laser power to heat the surface of a workpiece before the material is removed. It has several advantages of low manufacturing costs, high productivity and high qualities to machine difficult-to-cut materials such as silicon nitride, muUite, zirconia and Ni. A large part of studies on LAT have been focused on a round bar. With increasing demands for high quality products and high performance engineering system, the researches on LAT for clover and square section members are necessary. But, these workpieces are impossible to be machined on conventional CNC lathe and to generate NC code with current CAM softwares. As a basic research for combining LAT with a tilting index table type 5-axis machining center, i.e. laser assisted turn-mill, a new method is suggested to generate NC code that can process various types of clover and square section members through development of C＋＋ program.展开更多
Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. Fi...Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. First of all, the thermal characteristic analysis was performed to verify the importance of laser module location. Laser module should be moved within 1 mm. Analysis conditions of three positions in driving range of the one-axis manipulator are selected. And a C coupling is used as a connection device for spindle and laser module. An initial model has one C coupling, and the number of C coupling has been increased from 1 to 2 in an improved model. And the analysis is carried out again for the one-axis manipulator. The results of the static analysis, the maximum displacement and the maximum stress are decreased by 22% and 11%, respectively, for the improved model when the laser module is located at farthest away from the spindle unit. As a result of the modal analysis, the first natural frequency mode is increased by 13%, 18% and 12% at these positions of the improved model, respectively. The harmonic analysis of the improved model was performed by analyzing the results of the modal analysis. The maximum deformation was 0.33 mm in driving unit at 222 Hz. And the maximum compliance of the ISO axis direction was 0.23 mm/N. Finally, the one-axis manipulator has been fabricated successfully using the analysis result.展开更多
基金Project(2011-0017407)supported by the National Research Foundation of Korea(NRF)funded by Korea government(MEST)
文摘Laser assisted turning （LAT） is one of the advanced machining technologies, which uses laser power to heat the surface of a workpiece before the material is removed. It has several advantages of low manufacturing costs, high productivity and high qualities to machine difficult-to-cut materials such as silicon nitride, muUite, zirconia and Ni. A large part of studies on LAT have been focused on a round bar. With increasing demands for high quality products and high performance engineering system, the researches on LAT for clover and square section members are necessary. But, these workpieces are impossible to be machined on conventional CNC lathe and to generate NC code with current CAM softwares. As a basic research for combining LAT with a tilting index table type 5-axis machining center, i.e. laser assisted turn-mill, a new method is suggested to generate NC code that can process various types of clover and square section members through development of C＋＋ program.
基金Project(2012-0005688) supported by the National Research Foundation of Korea (NRF) Grant funded by the Korea Government (MEST)
文摘Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. First of all, the thermal characteristic analysis was performed to verify the importance of laser module location. Laser module should be moved within 1 mm. Analysis conditions of three positions in driving range of the one-axis manipulator are selected. And a C coupling is used as a connection device for spindle and laser module. An initial model has one C coupling, and the number of C coupling has been increased from 1 to 2 in an improved model. And the analysis is carried out again for the one-axis manipulator. The results of the static analysis, the maximum displacement and the maximum stress are decreased by 22% and 11%, respectively, for the improved model when the laser module is located at farthest away from the spindle unit. As a result of the modal analysis, the first natural frequency mode is increased by 13%, 18% and 12% at these positions of the improved model, respectively. The harmonic analysis of the improved model was performed by analyzing the results of the modal analysis. The maximum deformation was 0.33 mm in driving unit at 222 Hz. And the maximum compliance of the ISO axis direction was 0.23 mm/N. Finally, the one-axis manipulator has been fabricated successfully using the analysis result.
