This paper discusses the bathymetric mapping technologies by means of satellite remote sensing (RS) with special emphasis on bathymetry derivation models, methods, accuracies, advantages, limitations, and comparisons....This paper discusses the bathymetric mapping technologies by means of satellite remote sensing (RS) with special emphasis on bathymetry derivation models, methods, accuracies, advantages, limitations, and comparisons. Traditionally, bathymetry can be mapped using echo sounding sounders. However, this method is constrained by its inefficiency in shallow waters and very high operating logistic costs. In comparison, RS technologies present efficient and cost-effective means of mapping bathymetry over remote and broad areas. RS of bathymetry can be categorised into two broad classes: active RS and passive RS. Active RS methods are based on active satellite sensors, which emit artificial radiation to study the earth surface or atmospheric features, e.g. light detection and ranging (LIDAR), polarimetric synthetic aperture radar (SAR), altimeters, etc. Passive RS methods are based on passive satellite sensors, which detect sunlight (natural source of light) radiation reflected from the earth and thermal radiation in the visible and infrared portion of the electromagnetic spectrum, e.g. multispectral or optical satellite sensors. Bathymetric methods can also be categorised as imaging methods and non-imaging methods. The non-imaging method is elucidated by laser scanners or LIDAR, which measures the distance between the sensor and the water surface or the ocean floor using a single wave pulse or double waves. On the other hand, imaging methods approximate the water depth based on the pixel values or digital numbers (DN) (representing reflectance or backscatter) of an image. Imaging methods make use of the visible and/or near infrared (NIR) and microwave radiation. Imaging methods are implemented with either analytical modelling or empirical modelling, or by a blend of both. This paper presents the development of bathymetric mapping technology by using RS, and discusses the state-of-the-art bathymetry derivation methods/algorithms and their implications in practical applications.展开更多
The cryosphere is the frozen part of the Earth’s system. Snow and ice are the main constituents of the cryosphere and may be found in different states, such as snow, freshwater ice, sea ice, perma-frost, and continen...The cryosphere is the frozen part of the Earth’s system. Snow and ice are the main constituents of the cryosphere and may be found in different states, such as snow, freshwater ice, sea ice, perma-frost, and continental ice masses in the form of glaciers and ice sheets. The present review mainly deals with state-of-the-art applications of synthetic aperture radar (SAR) with a special emphasize on cryospheric information extraction. SAR is the most important active microwave remote sensing (RS) instrument for ice monitoring, which provides high-resolution images of the Earth’s surface. SAR is an ideal sensor in RS technology, which works in all-weather and day and night conditions to provide useful unprecedented information, especially in the cryospheric regions which are almost inaccessible areas on Earth. This paper addresses the technological evolution of SAR and its applications in studying the various components of the cryosphere. The arrival of SAR radically changed the capabilities of information extraction related to ice type, new ice formation, and ice thickness. SAR applications can be divided into two broad classes-polarimetric applications and interferometric applications. Polarimetric SAR has been effectively used for mapping calving fronts, crevasses, surface structures, sea ice, detection of icebergs, etc. The paper also summarizes both the operational and climate change research by using SAR for sea ice parameter detection. Digital elevation model (DEM) generation and glacier velocity mapping are the two most important applications used in cryosphere using SAR interferometry or interferometric SAR (InSAR). Space-borne InSAR techniques for measuring ice flow velocity and topography have developed rapidly over the last decade. InSAR is capable of measuring ice motion that has radically changed the science of glaciers and ice sheets. Measurement of temperate glacier velocities and surface characteristics by using airborne and space-borne interferometric satellite images have been the significant application in glaciology and cryospheric studies. Space-borne InSAR has contributed to major evolution in many research areas of glaciological study by measuring ice-stream flow velocity, improving understanding of ice-shelf processes, yielding velocity for flux-gate based mass-balance assessment, and mapping flow of mountain glaciers. The present review summarizes the salient development of SAR applications in cryosphere and glaciology.展开更多
Water on the Earth’s surface is an essential part of the hydrological cycle. Water resources include surface waters, groundwater, lakes, inland waters, rivers, coastal waters, and aquifers. Monitoring lake dynamics i...Water on the Earth’s surface is an essential part of the hydrological cycle. Water resources include surface waters, groundwater, lakes, inland waters, rivers, coastal waters, and aquifers. Monitoring lake dynamics is critical to favor sustainable management of water resources on Earth. In cryosphere, lake ice cover is a robust indicator of local climate variability and change. Therefore, it is necessary to review recent methods, technologies, and satellite sensors employed for the extraction of lakes from satellite imagery. The present review focuses on the comprehensive evaluation of existing methods for extraction of lake or water body features from remotely sensed optical data. We summarize pixel-based, object-based, hybrid, spectral index based, target and spectral matching methods employed in extracting lake features in urban and cryospheric environments. To our knowledge, almost all of the published research studies on the extraction of surface lakes in cryospheric environments have essentially used satellite remote sensing data and geospatial methods. Satellite sensors of varying spatial, temporal and spectral resolutions have been used to extract and analyze the information regarding surface water. Multispectral remote sensing has been widely utilized in cryospheric studies and has employed a variety of electro-optical satellite sensor systems for characterization and extraction of various cryospheric features, such as glaciers, sea ice, lakes and rivers, the extent of snow and ice, and icebergs. It is apparent that the most common methods for extracting water bodies use single band-based threshold methods, spectral index ratio (SIR)-based multiband methods, image segmentation methods, spectral-matching methods, and target detection methods (unsupervised, supervised and hybrid). A Synergetic fusion of various remote sensing methods is also proposed to improve water information extraction accuracies. The methods developed so far are not generic rather they are specific to either the location or satellite imagery or to the type of the feature to be extracted. Lots of factors are responsible for leading to inaccurate results of lake-feature extraction in cryospheric regions, e.g. the mountain shadow which also appears as a dark pixel is often misclassified as an open lake. The methods which are working well in the cryospheric environment for feature extraction or landcover classification does not really guarantee that they will be working in the same manner for the urban environment. Thus, in coming years, it is expected that much of the work will be done on object-based approach or hybrid approach involving both pixel as well as object-based technology. A more accurate, versatile and robust method is necessary to be developed that would work independent of geographical location (for both urban and cryosphere) and type of optical sensor.展开更多
Image classification is one of the most basic operations of digital image processing. The present review focuses on the strengths and weaknesses of traditional pixel-based classification (PBC) and the advances of obje...Image classification is one of the most basic operations of digital image processing. The present review focuses on the strengths and weaknesses of traditional pixel-based classification (PBC) and the advances of object-oriented classification (OOC) algorithms employed for the extraction of information from remotely sensed satellite imageries. The state-of-the-art classifiers are reviewed for their potential usage in urban remote sensing (RS), with a special focus on cryospheric applications. Generally, classifiers for information extraction can be divided into three catalogues: 1) based on the type of learning (supervised and unsupervised), 2) based on assumptions on data distribution (parametric and non-parametric) and, 3) based on the number of outputs for each spatial unit (hard and soft). The classification methods are broadly based on the PBC or the OOC approaches. Both methods have their own advantages and disadvantages depending upon their area of application and most importantly the RS datasets that are used for information extraction. Classification algorithms are variedly explored in the cryosphere for extracting geospatial information for various logistic and scientific applications, such as to understand temporal changes in geographical phenomena. Information extraction in cryospheric regions is challenging, accounting to the very similar and conflicting spectral responses of the features present in the region. The spectral responses of snow and ice, water, and blue ice, rock and shadow are a big challenge for the pixel-based classifiers. Thus, in such cases, OOC approach is superior for extracting information from the cryospheric regions. Also, ensemble classifiers and customized spectral index ratios (CSIR) proved extremely good approaches for information extraction from cryospheric regions. The present review would be beneficial for developing new classifiers in the cryospheric environment for better understanding of spatial-temporal changes over long time scales.展开更多
This case study has made an effort to show the impact of improved ocean initial conditions(ICs)in a coupled forecast system(CFSv2)simulation on the seasonal prediction of Indian summer monsoon rainfall(ISMR).CFSv2 is ...This case study has made an effort to show the impact of improved ocean initial conditions(ICs)in a coupled forecast system(CFSv2)simulation on the seasonal prediction of Indian summer monsoon rainfall(ISMR).CFSv2 is used as an operational dynamical model for the seasonal prediction of ISMR.Here,we show an improved ISMR skill by initializing the ocean component of CFSv2 using new improved ocean ICs based on Global Ocean Data Assimilation System(GODAS)analysis.This new analysis is better than the NCEP GODAS,which uses the earlier-generation ocean model MOM4p0d and assimilates observed temperature and synthetic salinity using the 3DVar assimilation scheme.However,the new,improved GODAS analysis uses the MOM4p1 ocean model and assimilates observed salinity instead of synthetic salinity.We performed twin sets of nearly identical model experiments differing only in their ICs,with one set using NCEP ICs and the other using the new ICs(NIC).The NIC experiment consistently shows better El Niño-Southern Oscillation prediction skill than the NCEP IC experiment.This advancement leads to improvement in the ISMR skill.We found that the substantial improvements in both oceanic and atmospheric variables in a coupled feedback system contributed to the improved ISMR skills.The enhanced ISMR skill score of the NIC experiment might be the result of improved teleconnections,better depiction of large-scale monsoon circulations,and reduced model drift.展开更多
文摘This paper discusses the bathymetric mapping technologies by means of satellite remote sensing (RS) with special emphasis on bathymetry derivation models, methods, accuracies, advantages, limitations, and comparisons. Traditionally, bathymetry can be mapped using echo sounding sounders. However, this method is constrained by its inefficiency in shallow waters and very high operating logistic costs. In comparison, RS technologies present efficient and cost-effective means of mapping bathymetry over remote and broad areas. RS of bathymetry can be categorised into two broad classes: active RS and passive RS. Active RS methods are based on active satellite sensors, which emit artificial radiation to study the earth surface or atmospheric features, e.g. light detection and ranging (LIDAR), polarimetric synthetic aperture radar (SAR), altimeters, etc. Passive RS methods are based on passive satellite sensors, which detect sunlight (natural source of light) radiation reflected from the earth and thermal radiation in the visible and infrared portion of the electromagnetic spectrum, e.g. multispectral or optical satellite sensors. Bathymetric methods can also be categorised as imaging methods and non-imaging methods. The non-imaging method is elucidated by laser scanners or LIDAR, which measures the distance between the sensor and the water surface or the ocean floor using a single wave pulse or double waves. On the other hand, imaging methods approximate the water depth based on the pixel values or digital numbers (DN) (representing reflectance or backscatter) of an image. Imaging methods make use of the visible and/or near infrared (NIR) and microwave radiation. Imaging methods are implemented with either analytical modelling or empirical modelling, or by a blend of both. This paper presents the development of bathymetric mapping technology by using RS, and discusses the state-of-the-art bathymetry derivation methods/algorithms and their implications in practical applications.
文摘The cryosphere is the frozen part of the Earth’s system. Snow and ice are the main constituents of the cryosphere and may be found in different states, such as snow, freshwater ice, sea ice, perma-frost, and continental ice masses in the form of glaciers and ice sheets. The present review mainly deals with state-of-the-art applications of synthetic aperture radar (SAR) with a special emphasize on cryospheric information extraction. SAR is the most important active microwave remote sensing (RS) instrument for ice monitoring, which provides high-resolution images of the Earth’s surface. SAR is an ideal sensor in RS technology, which works in all-weather and day and night conditions to provide useful unprecedented information, especially in the cryospheric regions which are almost inaccessible areas on Earth. This paper addresses the technological evolution of SAR and its applications in studying the various components of the cryosphere. The arrival of SAR radically changed the capabilities of information extraction related to ice type, new ice formation, and ice thickness. SAR applications can be divided into two broad classes-polarimetric applications and interferometric applications. Polarimetric SAR has been effectively used for mapping calving fronts, crevasses, surface structures, sea ice, detection of icebergs, etc. The paper also summarizes both the operational and climate change research by using SAR for sea ice parameter detection. Digital elevation model (DEM) generation and glacier velocity mapping are the two most important applications used in cryosphere using SAR interferometry or interferometric SAR (InSAR). Space-borne InSAR techniques for measuring ice flow velocity and topography have developed rapidly over the last decade. InSAR is capable of measuring ice motion that has radically changed the science of glaciers and ice sheets. Measurement of temperate glacier velocities and surface characteristics by using airborne and space-borne interferometric satellite images have been the significant application in glaciology and cryospheric studies. Space-borne InSAR has contributed to major evolution in many research areas of glaciological study by measuring ice-stream flow velocity, improving understanding of ice-shelf processes, yielding velocity for flux-gate based mass-balance assessment, and mapping flow of mountain glaciers. The present review summarizes the salient development of SAR applications in cryosphere and glaciology.
文摘Water on the Earth’s surface is an essential part of the hydrological cycle. Water resources include surface waters, groundwater, lakes, inland waters, rivers, coastal waters, and aquifers. Monitoring lake dynamics is critical to favor sustainable management of water resources on Earth. In cryosphere, lake ice cover is a robust indicator of local climate variability and change. Therefore, it is necessary to review recent methods, technologies, and satellite sensors employed for the extraction of lakes from satellite imagery. The present review focuses on the comprehensive evaluation of existing methods for extraction of lake or water body features from remotely sensed optical data. We summarize pixel-based, object-based, hybrid, spectral index based, target and spectral matching methods employed in extracting lake features in urban and cryospheric environments. To our knowledge, almost all of the published research studies on the extraction of surface lakes in cryospheric environments have essentially used satellite remote sensing data and geospatial methods. Satellite sensors of varying spatial, temporal and spectral resolutions have been used to extract and analyze the information regarding surface water. Multispectral remote sensing has been widely utilized in cryospheric studies and has employed a variety of electro-optical satellite sensor systems for characterization and extraction of various cryospheric features, such as glaciers, sea ice, lakes and rivers, the extent of snow and ice, and icebergs. It is apparent that the most common methods for extracting water bodies use single band-based threshold methods, spectral index ratio (SIR)-based multiband methods, image segmentation methods, spectral-matching methods, and target detection methods (unsupervised, supervised and hybrid). A Synergetic fusion of various remote sensing methods is also proposed to improve water information extraction accuracies. The methods developed so far are not generic rather they are specific to either the location or satellite imagery or to the type of the feature to be extracted. Lots of factors are responsible for leading to inaccurate results of lake-feature extraction in cryospheric regions, e.g. the mountain shadow which also appears as a dark pixel is often misclassified as an open lake. The methods which are working well in the cryospheric environment for feature extraction or landcover classification does not really guarantee that they will be working in the same manner for the urban environment. Thus, in coming years, it is expected that much of the work will be done on object-based approach or hybrid approach involving both pixel as well as object-based technology. A more accurate, versatile and robust method is necessary to be developed that would work independent of geographical location (for both urban and cryosphere) and type of optical sensor.
文摘Image classification is one of the most basic operations of digital image processing. The present review focuses on the strengths and weaknesses of traditional pixel-based classification (PBC) and the advances of object-oriented classification (OOC) algorithms employed for the extraction of information from remotely sensed satellite imageries. The state-of-the-art classifiers are reviewed for their potential usage in urban remote sensing (RS), with a special focus on cryospheric applications. Generally, classifiers for information extraction can be divided into three catalogues: 1) based on the type of learning (supervised and unsupervised), 2) based on assumptions on data distribution (parametric and non-parametric) and, 3) based on the number of outputs for each spatial unit (hard and soft). The classification methods are broadly based on the PBC or the OOC approaches. Both methods have their own advantages and disadvantages depending upon their area of application and most importantly the RS datasets that are used for information extraction. Classification algorithms are variedly explored in the cryosphere for extracting geospatial information for various logistic and scientific applications, such as to understand temporal changes in geographical phenomena. Information extraction in cryospheric regions is challenging, accounting to the very similar and conflicting spectral responses of the features present in the region. The spectral responses of snow and ice, water, and blue ice, rock and shadow are a big challenge for the pixel-based classifiers. Thus, in such cases, OOC approach is superior for extracting information from the cryospheric regions. Also, ensemble classifiers and customized spectral index ratios (CSIR) proved extremely good approaches for information extraction from cryospheric regions. The present review would be beneficial for developing new classifiers in the cryospheric environment for better understanding of spatial-temporal changes over long time scales.
文摘This case study has made an effort to show the impact of improved ocean initial conditions(ICs)in a coupled forecast system(CFSv2)simulation on the seasonal prediction of Indian summer monsoon rainfall(ISMR).CFSv2 is used as an operational dynamical model for the seasonal prediction of ISMR.Here,we show an improved ISMR skill by initializing the ocean component of CFSv2 using new improved ocean ICs based on Global Ocean Data Assimilation System(GODAS)analysis.This new analysis is better than the NCEP GODAS,which uses the earlier-generation ocean model MOM4p0d and assimilates observed temperature and synthetic salinity using the 3DVar assimilation scheme.However,the new,improved GODAS analysis uses the MOM4p1 ocean model and assimilates observed salinity instead of synthetic salinity.We performed twin sets of nearly identical model experiments differing only in their ICs,with one set using NCEP ICs and the other using the new ICs(NIC).The NIC experiment consistently shows better El Niño-Southern Oscillation prediction skill than the NCEP IC experiment.This advancement leads to improvement in the ISMR skill.We found that the substantial improvements in both oceanic and atmospheric variables in a coupled feedback system contributed to the improved ISMR skills.The enhanced ISMR skill score of the NIC experiment might be the result of improved teleconnections,better depiction of large-scale monsoon circulations,and reduced model drift.
