The influence of Mo and ZrO_(2)nanoparticles addition on the interfacial properties and shear strength of Sn58Bi solder joint was investigated.The interfacial microstructures of Sn58Bi/Cu,Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(...The influence of Mo and ZrO_(2)nanoparticles addition on the interfacial properties and shear strength of Sn58Bi solder joint was investigated.The interfacial microstructures of Sn58Bi/Cu,Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints were analysed using a scanning electron microscope(SEM)coupled with energy dispersive X-ray(EDX)and the X-ray diffraction(XRD).Intermetallic compounds(IMCs)of MoSn_(2)are detected in the Sn58Bi+Mo/Cu solder joint,while SnZr,Zr_(5)Sn_(3),ZrCu and ZrSn_(2)are detected in Sn58Bi+ZrO_(2)/Cu solder joint.IMC layers for both composite solders comprise of Cu_(6)Sn_(5) and Cu_(3)Sn.The SEM images of these layers were used to measure the IMC layer’s thickness.The average IMC layer’s thickness is 1.4431μm for Sn58Bi+Mo/Cu and 0.9112μm for Sn58Bi+ZrO_(2)/Cu solder joints.Shear strength of the solder joints was investigated via the single shear lap test method.The average maximum load and shear stress of the Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints are increased by 33%and 69%,respectively,as compared to those of the Sn58Bi/Cu solder joint.By comparing both composite solder joints,the latter prevails better as adding smaller sized ZrO_(2)nanoparticles improves the interfacial properties granting a stronger solder joint.展开更多
This paper aims to investigate and present the numerical investigation of airflow characteristics using Turbulent Kinetic Energy(TKE)to characterize the upper airway with obstructive sleep apnea(OSA)under inhale and e...This paper aims to investigate and present the numerical investigation of airflow characteristics using Turbulent Kinetic Energy(TKE)to characterize the upper airway with obstructive sleep apnea(OSA)under inhale and exhale breathing conditions.The importance of TKE under both breathing conditions is that it showan accuratemethod in expressing the severity of flow in sleep disorder.Computational fluid dynamics simulate the upper airway’s airflow via steady-state Reynolds-averaged Navier-Stokes(RANS)with k–ωshear stress transport(SST)turbulencemodel.The three-dimensional(3D)airway model is created based on the CT scan images of an actual patient,meshed with 1.29 million elements using Materialise Interactive Medical Image Control System(MIMICS)and ANSYS software,respectively.High TKE were noticed around the region after the necking(smaller cross-sectional area)during the inhale and exhale breathing.The turbulent kinetic energy could be used as a valuablemeasure to identify the severity of OSA.This study is expected to provide a better understanding and clear visualization of the airflow characteristics during the inhale and exhale breathing in the upper airway of patients for medical practitioners in the OSA research field.展开更多
The centrifugal pump is a prevalent power equipment widely used in different engineering patterns,and the impeller blade wrap angle significantly impacts its performance.A numerical investigation was conducted to anal...The centrifugal pump is a prevalent power equipment widely used in different engineering patterns,and the impeller blade wrap angle significantly impacts its performance.A numerical investigation was conducted to analyze the influence of the blade wrap angle on flow characteristics and energy distribution of a centrifugal pump evaluated as a low specific speed with a value of 69.This study investigates six impellermodels that possess varying blade wrap angles(95°,105°,115°,125°,135°,and 145°)that were created while maintaining the same volute and other geometrical characteristics.The investigation of energy loss was conducted to evaluate the values of total and entropy generation rates(TEG,EGR).The fluid-structure interaction was considered numerically using the software tools ANSYS Fluent and ANSYSWorkbench.The elastic structural dynamic equation was used to estimate the structural response,while the shear stress transport k–ωturbulence model was utilized for the fluid domain modeling.The findings suggest that the blade wrap angle has a significant influence on the efficiency of the pump.The impeller featuring a blade wrap angle of 145°exhibits higher efficiency,with a notable increase of 3.76%relative to the original model.Variations in the blade wrap angle impact the energy loss,shaft power,and pump head.The model with a 145°angle exhibited a maximum equivalent stress of 14.8MPa and a total deformation of 0.084 mm.The results provide valuable insights into the intricate flow mechanism of the centrifugal pump,particularly when considering various blade wrap angles.展开更多
The purpose of this study is to investigate the approaches applied to analyze solid oxide fuel cell (SOFC) microstructural properties. Both manual and automated image processing approaches applied on SOFC microstructu...The purpose of this study is to investigate the approaches applied to analyze solid oxide fuel cell (SOFC) microstructural properties. Both manual and automated image processing approaches applied on SOFC microstructural images which are obtained from several types of tomography such as dual-beam focused ion beam with scanning electron microscopy (FIB-SEM), Electron Backscatter Diffraction (EBSD) and others are discussed. In fact, to achieve a realistic and accurate SOFC microstructural properties, such as average diameter, volume fraction, triple phase boundary (TPB), area interface density and tortuosity factor, the approaches of image processing and quantification are crucial for a reliable image generation for quantification purposes. The microstructural properties are optimized to improve SOFC electrode performance. Therefore, the image processing and quantification approaches are outlined and reviewed. Despite the automated image processing and quantification algorithms significantly outperform manual image processing and quantification approaches in terms of computing speed when evaluating and measuring microstructural properties, the efficiency and productivity are still extremely taken into concern. As a result, image processing and quantification approaches are concluded and presented respectively in this paper.展开更多
文摘The influence of Mo and ZrO_(2)nanoparticles addition on the interfacial properties and shear strength of Sn58Bi solder joint was investigated.The interfacial microstructures of Sn58Bi/Cu,Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints were analysed using a scanning electron microscope(SEM)coupled with energy dispersive X-ray(EDX)and the X-ray diffraction(XRD).Intermetallic compounds(IMCs)of MoSn_(2)are detected in the Sn58Bi+Mo/Cu solder joint,while SnZr,Zr_(5)Sn_(3),ZrCu and ZrSn_(2)are detected in Sn58Bi+ZrO_(2)/Cu solder joint.IMC layers for both composite solders comprise of Cu_(6)Sn_(5) and Cu_(3)Sn.The SEM images of these layers were used to measure the IMC layer’s thickness.The average IMC layer’s thickness is 1.4431μm for Sn58Bi+Mo/Cu and 0.9112μm for Sn58Bi+ZrO_(2)/Cu solder joints.Shear strength of the solder joints was investigated via the single shear lap test method.The average maximum load and shear stress of the Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints are increased by 33%and 69%,respectively,as compared to those of the Sn58Bi/Cu solder joint.By comparing both composite solder joints,the latter prevails better as adding smaller sized ZrO_(2)nanoparticles improves the interfacial properties granting a stronger solder joint.
基金supported by the Fundamental Research Grant Scheme provided by the Ministry of Higher Education (Ref.No.FRGS/1/2020/TK0/UNIMAP/03/26).
文摘This paper aims to investigate and present the numerical investigation of airflow characteristics using Turbulent Kinetic Energy(TKE)to characterize the upper airway with obstructive sleep apnea(OSA)under inhale and exhale breathing conditions.The importance of TKE under both breathing conditions is that it showan accuratemethod in expressing the severity of flow in sleep disorder.Computational fluid dynamics simulate the upper airway’s airflow via steady-state Reynolds-averaged Navier-Stokes(RANS)with k–ωshear stress transport(SST)turbulencemodel.The three-dimensional(3D)airway model is created based on the CT scan images of an actual patient,meshed with 1.29 million elements using Materialise Interactive Medical Image Control System(MIMICS)and ANSYS software,respectively.High TKE were noticed around the region after the necking(smaller cross-sectional area)during the inhale and exhale breathing.The turbulent kinetic energy could be used as a valuablemeasure to identify the severity of OSA.This study is expected to provide a better understanding and clear visualization of the airflow characteristics during the inhale and exhale breathing in the upper airway of patients for medical practitioners in the OSA research field.
文摘The centrifugal pump is a prevalent power equipment widely used in different engineering patterns,and the impeller blade wrap angle significantly impacts its performance.A numerical investigation was conducted to analyze the influence of the blade wrap angle on flow characteristics and energy distribution of a centrifugal pump evaluated as a low specific speed with a value of 69.This study investigates six impellermodels that possess varying blade wrap angles(95°,105°,115°,125°,135°,and 145°)that were created while maintaining the same volute and other geometrical characteristics.The investigation of energy loss was conducted to evaluate the values of total and entropy generation rates(TEG,EGR).The fluid-structure interaction was considered numerically using the software tools ANSYS Fluent and ANSYSWorkbench.The elastic structural dynamic equation was used to estimate the structural response,while the shear stress transport k–ωturbulence model was utilized for the fluid domain modeling.The findings suggest that the blade wrap angle has a significant influence on the efficiency of the pump.The impeller featuring a blade wrap angle of 145°exhibits higher efficiency,with a notable increase of 3.76%relative to the original model.Variations in the blade wrap angle impact the energy loss,shaft power,and pump head.The model with a 145°angle exhibited a maximum equivalent stress of 14.8MPa and a total deformation of 0.084 mm.The results provide valuable insights into the intricate flow mechanism of the centrifugal pump,particularly when considering various blade wrap angles.
文摘The purpose of this study is to investigate the approaches applied to analyze solid oxide fuel cell (SOFC) microstructural properties. Both manual and automated image processing approaches applied on SOFC microstructural images which are obtained from several types of tomography such as dual-beam focused ion beam with scanning electron microscopy (FIB-SEM), Electron Backscatter Diffraction (EBSD) and others are discussed. In fact, to achieve a realistic and accurate SOFC microstructural properties, such as average diameter, volume fraction, triple phase boundary (TPB), area interface density and tortuosity factor, the approaches of image processing and quantification are crucial for a reliable image generation for quantification purposes. The microstructural properties are optimized to improve SOFC electrode performance. Therefore, the image processing and quantification approaches are outlined and reviewed. Despite the automated image processing and quantification algorithms significantly outperform manual image processing and quantification approaches in terms of computing speed when evaluating and measuring microstructural properties, the efficiency and productivity are still extremely taken into concern. As a result, image processing and quantification approaches are concluded and presented respectively in this paper.
