The technology of carbon dioxide(CO_(2))enhanced hydrocarbon recovery is favored over other Carbon Capture,Utilization,and Sequestration(CCUS)methods for achieving the"double carbon"goal in China due to its ...The technology of carbon dioxide(CO_(2))enhanced hydrocarbon recovery is favored over other Carbon Capture,Utilization,and Sequestration(CCUS)methods for achieving the"double carbon"goal in China due to its ability to sequester CO_(2) geologically while enhancing the recovery rates of oil and gas resources.However,current technologies face significant challenges,such as limited recovery enhancement capacity,as well as high costs and low efficiency in carbon utilization and sequestration.To address these issues,an innovative carbon-negative technology termed Carbon Capture,Circular Utilization,and Sequestration(CCUS)is proposed.This technology integrates CO_(2)-microbial enhanced hydrocarbon recovery,CO_(2) underground bio-methanation,and CO_(2) sequestration in depleted hydrocarbon reservoirs.Compared to conventional cCUS technologies,CCCUS stands out through both its modes of carbon utilization and the forms in which carbon exists,by cyclically biochemically converting endogenous and exogenous CO_(2) into renewable natural gas(RNG).A preliminary assessment indicates that CCCUS holds significant developmental potential in China,with 661 million tonnes of CO_(2) utilized per cycle and 3.47 billion tonnes ultimately sequestered.However,there is a significant lack of research on the core technology of CCCUS,specifically CO_(2) underground bio-methanation,in China.To bridge this gap and mitigate potential challenges during the development of CCCUS,targeted proposals have been formulated.This paper provides new insights into advancing the development of a circular carbon economy and accelerating the achievement of carbon neutrality in China.展开更多
Magnesium alloys,the advanced lightweight structural materials,have been successfully applied in the manufacturing field.Unfortunately,their poor corrosion resistance restrains the potential wide applications.In this ...Magnesium alloys,the advanced lightweight structural materials,have been successfully applied in the manufacturing field.Unfortunately,their poor corrosion resistance restrains the potential wide applications.In this work,anti-corrosion coatings were fabricated via the insitu growth of the corrosion inhibitors intercalated magnesium-aluminum layered double hydroxide(Mg-Al LDH)on AZ31 magnesium alloy and then post-sealing it by a super-hydrophobic coating.SEM,XRD,EDS,FTIR,XPS and contact angle test were conducted to analyze physical/chemical features of these coatings.Potentiodynamic polarization curves and electrochemical impedance spectroscopy were recorded to assess the anti-corrosion performance of prepared coatings.Surprisingly,Mg-Al LDH with molybdate intercalation and lauric acid modification achieves the excellent corrosion inhibition performance(99.99%)due to the multicomponent synergistic effect such as the physical protection of Mg-Al LDH,the corrosion inhibition of molybdate and super-hydrophobic properties of lauric acid.This work presents a scientific perspective and novel design philosophy to fabricate the efficient anti-corrosion coating to protect magnesium alloys and then expand their potential applications in other field.展开更多
As the traditional polymer stabilizer is eliminated to improve the injectability of foam in lowpermeability reservoirs,the stability,plugging capacity,conformance control and oil recovery performance of the surfactant...As the traditional polymer stabilizer is eliminated to improve the injectability of foam in lowpermeability reservoirs,the stability,plugging capacity,conformance control and oil recovery performance of the surfactant-alternating-gas(SAG)foam become significantly important for determining its adaptability to permeability and heterogeneity,which were focused and experimentally researched in this paper.Results show that the SAG bubbles are highly stable in micron-sized channels and porous media(than in the conventional unconstrained graduated cylinder),making it possible to use in enhanced oil recovery(EOR).Such bubbles formed in porous media could be passively adjusted to match their diameter with the size of the pore.This endows the SAG foam with underlying excellent injectability and deep migration capacity.Permeability adaptability results indicate a reduced plugging capacity,but,increased incremental oil recovery by the SAG foam with decreased permeability.This makes it a good candidate for EOR over a wide range of permeability,however,parallel core floods demonstrate that there is a limiting heterogeneity for SAG application,which is determined to be a permeability contrast of 12.0(for a reservoir containing oil of 9.9 m Pa s).Beyond this limit,the foam would become ineffective.展开更多
Elucidating the synergistic effect of wax and hydrates, involving formation, aggregation and deposition,is imperative to the operation and transportation safety for offshore petroleum fields. To understand the charact...Elucidating the synergistic effect of wax and hydrates, involving formation, aggregation and deposition,is imperative to the operation and transportation safety for offshore petroleum fields. To understand the characteristics and mechanism of synergistic deposition of wax and hydrates, flow and deposition experiments of systems with different wax contents(0-2.89 wt%), initial flow rates, pressures and temperatures were conducted in a high pressure visual flow loop. According to the flow rate and pressure drop data as well as the visual window observation, four different types of plugging scenarios of waxhydrate coexisting systems with different flow properties and wall deposition state were summarized,including rapid plugging, transition plugging, gradual plugging type I and gradual plugging type II.Compared with the wax-free system after hydrate formation, even with the addition of anti-agglomerant(AA) with the same concentration, wax-hydrate coexisting systems could not reach stable hydrate slurry flow state, indicating that the existence of wax deteriorated the performance of AA. Aside from the influence of wax crystals on hydrate agglomeration, it was found that wax deposition layer would alter the adhesion and bedding of hydrates, resulting in the variation of flow properties and wall deposition state.For low wax content systems(0.75 wt%) where rapid plugging occurred, the synergistic effect between wax and hydrates promoted the formation of wax-hydrate coupling aggregates, resulting in severe local deposition when the coupling aggregates attained critical deposition size and consequently decreasing flow rate, forming a vicious circle of decreasing transportability. Since bedding of coupling aggregates was hindered by the uniformly coated wax deposition layer on pipe wall, gradual plugging rather than rapid plugging occurred in medium wax content systems(1-1.25 wt%), predominately caused by the gradual increment in viscosity of waxy hydrate slurry. For relatively high wax content systems(2.89 wt%), hydrate formation and plugging did not occur, due to the insulation effect of wax deposition layer. A physical model for the synergistic deposition of wax and hydrates was also presented, which was meaningful to the development of a mathematical model for the prediction of blockage formation and risk analysis.展开更多
An interfacially active cobalt complex,cobalt dodecylbenzenesulfonate,was synthesized.Elemental analysis,atomic absorption spectroscopy,Fourier transform infrared spectroscopy（FT-IR）,thermogravimetric analysis,and s...An interfacially active cobalt complex,cobalt dodecylbenzenesulfonate,was synthesized.Elemental analysis,atomic absorption spectroscopy,Fourier transform infrared spectroscopy（FT-IR）,thermogravimetric analysis,and surface/interfacial tension determination were performed to investigate the properties of the catalyst.Results showed that the synthesized catalyst showed active interfacial behavior,decreasing the surface tension and interfacial tension between heavy oil and liquid phase to below 30 and 1.5 mN/m,respectively.The catalyst was not thermally degraded at a temperature of 400 ℃,indicating its high thermal stability.Catalytic performance of the catalyst was evaluated by carrying out aquathermolysis.The viscosity determination showed that the viscosity of the heavy oil decreased by 38%.The average molecular weight,group compositions,and average molecular structure of various samples were analyzed using elemental analysis,FT-IR,electrospray ionization Fourier transform ion cyclotron resonance（ESI FT-ICR MS）,and ～1H nuclear magnetic resonance.Results indicated that the catalyst could attack the sulfur- and O_2-type heteroatomic compounds in asphaltene and resin,especially the compounds with aromatic structure,leading to a decrease in the molecular weight and then the reduction in the viscosity of heavy oil.Therefore,the synthesized catalyst might find an application in catalytic aquathermolysis of heavy oil,especially for the high-aromaticity heavy oil with high oxygen content.展开更多
Cementing carbonate reservoirs is generally a difficult task.The so-called thixotropic cement slurry has gained considerable attention in this regard as it can help tofix some notable problems.More precisely,it can ea...Cementing carbonate reservoirs is generally a difficult task.The so-called thixotropic cement slurry has gained considerable attention in this regard as it can help tofix some notable problems.More precisely,it can easilyfill the leakage layer;moreover,its gelling strength can grow rapidly when pumping stops,thereby increasing the resistance to gas channeling,effectively preventing this undesired phenomenon in many cases.High-temperature thixotropic cement slurry systems,however,are still in an early stage of development and additional research is needed to make them a viable option.In the present study,using a self-developed composite high-temperature thixotropic additive as a basis,it is shown that the compressive strength can be adjusted by tuning the proportion of silica sand,the high-temperature retarder,fluid loss additive and dispersant(compatible with the thixotropic additive).According to the tests,the developed high-temperature thixotropic cement slurry system has a 14 d compressive strength of 29.73 MPa at 150°C,and a thickening time of 330 min when the dosage of retarder is 2%.At the same time,the rheological property,water loss,permeability,water separation rate,and settlement stability of the cement slurry system meet the requirements of cementing construction.展开更多
As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crud...As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.展开更多
Based on a geology-engineering sweet spot evaluation,the high-quality reservoir zones and horizontal well landing points were determined.Subsequently,fracture propagation and production were simulated with a multilaye...Based on a geology-engineering sweet spot evaluation,the high-quality reservoir zones and horizontal well landing points were determined.Subsequently,fracture propagation and production were simulated with a multilayer fracturing scenario.The optimal hydraulic fracturing strategy for themultilayer fracturing networkwas determined by introducing a vertical asymmetry factor.This strategy aimed to minimize stress shadowing effects in the vertical direction while maximizing the stimulated reservoir volume(SRV).The study found that the small vertical layer spacing of high-quality reservoirs and the presence of stress-masking layers(with a stress difference of approximately 3∼8 MPa)indicate that interlayer stress interference from multilayers and multiwells fracturing between neighboring developed formations could affect the longitudinal propagation of the reservoirs.In addition,this study investigated well spacing optimization by comparing uniformly spaced wells(100–300 m)with asymmetric spaced wells(200 m upper layer,250 m lower layer).Numerical results indicated that asymmetric spaced well placement yielded the largest stimulated reservoir volume(SRV)of 73,082 m^(3),representing a 65.42%increase compared to 100 m spaced wells.Furthermore,four different hydraulic fracturing sequences(interlayer,up-down,down-up,and center-edge)were compared for multilayer and multiwell networks.The center-edge sequence exhibited the lowest vertical asymmetry factor(0.71)and the least stress shadowing effects compared to the other sequences(0.78 for interlayer,0.75 for up-down,and 0.76 for down-up).This sequence also achieved the largest SRV(486,194m^(3)),representing an 11.87%increase compared to the down-up sequence.Therefore,the center-edge fracturing sequence is recommended formultilayer development in this block.These results offer valuable insights for optimizing well placement and fracturing sequence design in multilayer well networks,ultimately advancing the development of multilayer fracturing technology in the region.展开更多
To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and p...To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.展开更多
Microbial enhanced oil recovery (MEOR) is the research focus in the field of energy development as an environmentally friendly and low cost technology. MEOR can bes divided into indigenous microbial oil recovery and e...Microbial enhanced oil recovery (MEOR) is the research focus in the field of energy development as an environmentally friendly and low cost technology. MEOR can bes divided into indigenous microbial oil recovery and exogenous microbial oil recovery. The ultimate goal of indigenous microbial flooding is to enhance oil recovery via stimulation of specific indigenous microorganisms by injecting optimal nutrients. For studying the specific rule to activate the indigenous community during the long-term injection period, a series of indigenous displacement flooding experiments were carried out by using the long-core physical simulation test. The experimental results have shown that the movement of nutrients components (i.e., carbon/nitrogen/phosphorus) differed from the consumption of them. Moreover, there was a positive relationship between the nutrients concentration and bacteria concentration once observed in the produced fluid. And the trend of concentration of acetic acid was consistent with that of methanogens. When adding same activators, the impacts of selective activators to stimulate the indigenous microorganisms became worse along with the injection period, which led to less oil recovery efficiency.展开更多
The produced water from the oilfield was purified with filter material and then injected back into the ground.The serpentine filter material was easy to harden with the increase in filtration amount,which affected the...The produced water from the oilfield was purified with filter material and then injected back into the ground.The serpentine filter material was easy to harden with the increase in filtration amount,which affected the water quality.A superhydrophilic/underwater oleophobic serpentine filter material was successfully prepared by a simple method of coating modification,which exhibited long-lasting filtration of oily water,good filtration and anti-fouling properties,and resistance to harden.The film-forming material of the superhydrophilic/underwater oleophobic coating was composed of SiO_(2) particles with small size,which could completely and evenly cover the filter particle.The weight loss was only 7.6%after mechanical stirring for 90 min.Compared with the original filter material,the superhydrophilic/underwater oleophobic serpentine filter material showed a better anti-fouling ability and resistance to harden.The filtration of crude oil emulsion and oil slick sewage showed a better backwashing performance.After 35 cycles of continuous filtration of suspended solids in wastewater,the backwashing rate reached 78.4%.The results provided an effective method for the filtration of oily wastewater in the oilfield.展开更多
CO_(2) immiscible flooding is an environmentally-friendly and effective method to enhance oil recovery in ultra-low permeability reservoirs.A mathematical model of CO_(2) immiscible flooding was developed,considering ...CO_(2) immiscible flooding is an environmentally-friendly and effective method to enhance oil recovery in ultra-low permeability reservoirs.A mathematical model of CO_(2) immiscible flooding was developed,considering the variation in crude oil viscosity and starting pressure gradient in ultra-low permeability reservoirs based on the non-Darcy percolation theory.The mathematical model and numerical simulator were developed in the C++language to simulate the effects of fluid viscosity,starting pressure gradient,and other physical parameters on the distribution of the oil pressure field,oil saturation field,gas saturation field,oil viscosity field,and oil production.The results showed that the formation pressure and pressure propagation velocity in CO_(2) immiscible flooding were lower than the findings without considering the starting pressure gradient.The formation oil content saturation and the crude oil formation viscosity were higher after the consideration of the starting pressure gradient.The viscosity of crude oil considering the initiation pressure gradient during the formation was higher than that without this gradient,but the yield was lower than that condition.Our novel mathematical models helped the characterization of seepage resistance,revealed the influence of fluid property changes on seepage,improved the mathematical model of oil seepage in immiscible flooding processes,and guided the improvement of crude oil recovery in immiscible flooding processes.展开更多
基金funded by the European Union's“Horizon Europe programme”-LOC3G(Grant No.101129729)the Henan Center for Outstanding Overseas Scientists(Grant No.GZS2024001).
文摘The technology of carbon dioxide(CO_(2))enhanced hydrocarbon recovery is favored over other Carbon Capture,Utilization,and Sequestration(CCUS)methods for achieving the"double carbon"goal in China due to its ability to sequester CO_(2) geologically while enhancing the recovery rates of oil and gas resources.However,current technologies face significant challenges,such as limited recovery enhancement capacity,as well as high costs and low efficiency in carbon utilization and sequestration.To address these issues,an innovative carbon-negative technology termed Carbon Capture,Circular Utilization,and Sequestration(CCUS)is proposed.This technology integrates CO_(2)-microbial enhanced hydrocarbon recovery,CO_(2) underground bio-methanation,and CO_(2) sequestration in depleted hydrocarbon reservoirs.Compared to conventional cCUS technologies,CCCUS stands out through both its modes of carbon utilization and the forms in which carbon exists,by cyclically biochemically converting endogenous and exogenous CO_(2) into renewable natural gas(RNG).A preliminary assessment indicates that CCCUS holds significant developmental potential in China,with 661 million tonnes of CO_(2) utilized per cycle and 3.47 billion tonnes ultimately sequestered.However,there is a significant lack of research on the core technology of CCCUS,specifically CO_(2) underground bio-methanation,in China.To bridge this gap and mitigate potential challenges during the development of CCCUS,targeted proposals have been formulated.This paper provides new insights into advancing the development of a circular carbon economy and accelerating the achievement of carbon neutrality in China.
基金This work is financially supported by the Graduate Research and Innovation of Chongqing,China(Grant No.CYB18002)the National Natural Science Foundation of China(Grant No.21576034)+2 种基金the State Education Ministry and Fundamental Research Funds for the Central Universities(2019CDQYCL042,106112017CDJXSYY0001,2018CDYJSY0055,106112017CDJQJ138802,106112017CDJSK04XK11,2018CDQYCL0027)the Joint Funds of the National Natural Science Foundation of China-Guangdong(Grant No.U1801254)Fundamental Re-search Funds for the Central Universities(NO.2018CDJDCD0001).
文摘Magnesium alloys,the advanced lightweight structural materials,have been successfully applied in the manufacturing field.Unfortunately,their poor corrosion resistance restrains the potential wide applications.In this work,anti-corrosion coatings were fabricated via the insitu growth of the corrosion inhibitors intercalated magnesium-aluminum layered double hydroxide(Mg-Al LDH)on AZ31 magnesium alloy and then post-sealing it by a super-hydrophobic coating.SEM,XRD,EDS,FTIR,XPS and contact angle test were conducted to analyze physical/chemical features of these coatings.Potentiodynamic polarization curves and electrochemical impedance spectroscopy were recorded to assess the anti-corrosion performance of prepared coatings.Surprisingly,Mg-Al LDH with molybdate intercalation and lauric acid modification achieves the excellent corrosion inhibition performance(99.99%)due to the multicomponent synergistic effect such as the physical protection of Mg-Al LDH,the corrosion inhibition of molybdate and super-hydrophobic properties of lauric acid.This work presents a scientific perspective and novel design philosophy to fabricate the efficient anti-corrosion coating to protect magnesium alloys and then expand their potential applications in other field.
基金the Natural Science Foundation of Shandong Province of China(Grant No.ZR2020ME089)the National Natural Science Foundation of China(Grant No.51504275 and 5207433)for their financial supports
文摘As the traditional polymer stabilizer is eliminated to improve the injectability of foam in lowpermeability reservoirs,the stability,plugging capacity,conformance control and oil recovery performance of the surfactant-alternating-gas(SAG)foam become significantly important for determining its adaptability to permeability and heterogeneity,which were focused and experimentally researched in this paper.Results show that the SAG bubbles are highly stable in micron-sized channels and porous media(than in the conventional unconstrained graduated cylinder),making it possible to use in enhanced oil recovery(EOR).Such bubbles formed in porous media could be passively adjusted to match their diameter with the size of the pore.This endows the SAG foam with underlying excellent injectability and deep migration capacity.Permeability adaptability results indicate a reduced plugging capacity,but,increased incremental oil recovery by the SAG foam with decreased permeability.This makes it a good candidate for EOR over a wide range of permeability,however,parallel core floods demonstrate that there is a limiting heterogeneity for SAG application,which is determined to be a permeability contrast of 12.0(for a reservoir containing oil of 9.9 m Pa s).Beyond this limit,the foam would become ineffective.
基金supported by the National Natural Science Foundation of China (Grant No. 52004039&51804046&51974037)Open Project of Jiangsu Key Laboratory of Oil-gas Storage and Transportation Technology (Grant No. CDYQCY202102)China Postdoctoral Science Foundation (Grant No. 2021M693908)。
文摘Elucidating the synergistic effect of wax and hydrates, involving formation, aggregation and deposition,is imperative to the operation and transportation safety for offshore petroleum fields. To understand the characteristics and mechanism of synergistic deposition of wax and hydrates, flow and deposition experiments of systems with different wax contents(0-2.89 wt%), initial flow rates, pressures and temperatures were conducted in a high pressure visual flow loop. According to the flow rate and pressure drop data as well as the visual window observation, four different types of plugging scenarios of waxhydrate coexisting systems with different flow properties and wall deposition state were summarized,including rapid plugging, transition plugging, gradual plugging type I and gradual plugging type II.Compared with the wax-free system after hydrate formation, even with the addition of anti-agglomerant(AA) with the same concentration, wax-hydrate coexisting systems could not reach stable hydrate slurry flow state, indicating that the existence of wax deteriorated the performance of AA. Aside from the influence of wax crystals on hydrate agglomeration, it was found that wax deposition layer would alter the adhesion and bedding of hydrates, resulting in the variation of flow properties and wall deposition state.For low wax content systems(0.75 wt%) where rapid plugging occurred, the synergistic effect between wax and hydrates promoted the formation of wax-hydrate coupling aggregates, resulting in severe local deposition when the coupling aggregates attained critical deposition size and consequently decreasing flow rate, forming a vicious circle of decreasing transportability. Since bedding of coupling aggregates was hindered by the uniformly coated wax deposition layer on pipe wall, gradual plugging rather than rapid plugging occurred in medium wax content systems(1-1.25 wt%), predominately caused by the gradual increment in viscosity of waxy hydrate slurry. For relatively high wax content systems(2.89 wt%), hydrate formation and plugging did not occur, due to the insulation effect of wax deposition layer. A physical model for the synergistic deposition of wax and hydrates was also presented, which was meaningful to the development of a mathematical model for the prediction of blockage formation and risk analysis.
基金the financial support from the Key Programs of Science and Technology of SINPOEC (Grant No. P11093)
文摘An interfacially active cobalt complex,cobalt dodecylbenzenesulfonate,was synthesized.Elemental analysis,atomic absorption spectroscopy,Fourier transform infrared spectroscopy（FT-IR）,thermogravimetric analysis,and surface/interfacial tension determination were performed to investigate the properties of the catalyst.Results showed that the synthesized catalyst showed active interfacial behavior,decreasing the surface tension and interfacial tension between heavy oil and liquid phase to below 30 and 1.5 mN/m,respectively.The catalyst was not thermally degraded at a temperature of 400 ℃,indicating its high thermal stability.Catalytic performance of the catalyst was evaluated by carrying out aquathermolysis.The viscosity determination showed that the viscosity of the heavy oil decreased by 38%.The average molecular weight,group compositions,and average molecular structure of various samples were analyzed using elemental analysis,FT-IR,electrospray ionization Fourier transform ion cyclotron resonance（ESI FT-ICR MS）,and ～1H nuclear magnetic resonance.Results indicated that the catalyst could attack the sulfur- and O_2-type heteroatomic compounds in asphaltene and resin,especially the compounds with aromatic structure,leading to a decrease in the molecular weight and then the reduction in the viscosity of heavy oil.Therefore,the synthesized catalyst might find an application in catalytic aquathermolysis of heavy oil,especially for the high-aromaticity heavy oil with high oxygen content.
基金funded by the National Natural Science Foundation of China(51974355).
文摘Cementing carbonate reservoirs is generally a difficult task.The so-called thixotropic cement slurry has gained considerable attention in this regard as it can help tofix some notable problems.More precisely,it can easilyfill the leakage layer;moreover,its gelling strength can grow rapidly when pumping stops,thereby increasing the resistance to gas channeling,effectively preventing this undesired phenomenon in many cases.High-temperature thixotropic cement slurry systems,however,are still in an early stage of development and additional research is needed to make them a viable option.In the present study,using a self-developed composite high-temperature thixotropic additive as a basis,it is shown that the compressive strength can be adjusted by tuning the proportion of silica sand,the high-temperature retarder,fluid loss additive and dispersant(compatible with the thixotropic additive).According to the tests,the developed high-temperature thixotropic cement slurry system has a 14 d compressive strength of 29.73 MPa at 150°C,and a thickening time of 330 min when the dosage of retarder is 2%.At the same time,the rheological property,water loss,permeability,water separation rate,and settlement stability of the cement slurry system meet the requirements of cementing construction.
基金This work was financially supported by the National Natural Science Foundation of China(52074089 and 52104064)Natural Science Foundation of Heilongjiang Province of China(LH2019E019).
文摘As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.
基金supported by the National Natural Science Foundation of China(51704324,52374027)Shandong Natural Science Foundation of China(ZR2022ME025,ZR2023ME158).
文摘Based on a geology-engineering sweet spot evaluation,the high-quality reservoir zones and horizontal well landing points were determined.Subsequently,fracture propagation and production were simulated with a multilayer fracturing scenario.The optimal hydraulic fracturing strategy for themultilayer fracturing networkwas determined by introducing a vertical asymmetry factor.This strategy aimed to minimize stress shadowing effects in the vertical direction while maximizing the stimulated reservoir volume(SRV).The study found that the small vertical layer spacing of high-quality reservoirs and the presence of stress-masking layers(with a stress difference of approximately 3∼8 MPa)indicate that interlayer stress interference from multilayers and multiwells fracturing between neighboring developed formations could affect the longitudinal propagation of the reservoirs.In addition,this study investigated well spacing optimization by comparing uniformly spaced wells(100–300 m)with asymmetric spaced wells(200 m upper layer,250 m lower layer).Numerical results indicated that asymmetric spaced well placement yielded the largest stimulated reservoir volume(SRV)of 73,082 m^(3),representing a 65.42%increase compared to 100 m spaced wells.Furthermore,four different hydraulic fracturing sequences(interlayer,up-down,down-up,and center-edge)were compared for multilayer and multiwell networks.The center-edge sequence exhibited the lowest vertical asymmetry factor(0.71)and the least stress shadowing effects compared to the other sequences(0.78 for interlayer,0.75 for up-down,and 0.76 for down-up).This sequence also achieved the largest SRV(486,194m^(3)),representing an 11.87%increase compared to the down-up sequence.Therefore,the center-edge fracturing sequence is recommended formultilayer development in this block.These results offer valuable insights for optimizing well placement and fracturing sequence design in multilayer well networks,ultimately advancing the development of multilayer fracturing technology in the region.
基金financially supported by the National Natural Science Foundation of China(Grant No.51774307,52074331,42002182)partially supported by Major Special Projects of CNPC,China(ZD2019-184)。
文摘To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.
文摘Microbial enhanced oil recovery (MEOR) is the research focus in the field of energy development as an environmentally friendly and low cost technology. MEOR can bes divided into indigenous microbial oil recovery and exogenous microbial oil recovery. The ultimate goal of indigenous microbial flooding is to enhance oil recovery via stimulation of specific indigenous microorganisms by injecting optimal nutrients. For studying the specific rule to activate the indigenous community during the long-term injection period, a series of indigenous displacement flooding experiments were carried out by using the long-core physical simulation test. The experimental results have shown that the movement of nutrients components (i.e., carbon/nitrogen/phosphorus) differed from the consumption of them. Moreover, there was a positive relationship between the nutrients concentration and bacteria concentration once observed in the produced fluid. And the trend of concentration of acetic acid was consistent with that of methanogens. When adding same activators, the impacts of selective activators to stimulate the indigenous microorganisms became worse along with the injection period, which led to less oil recovery efficiency.
基金The National Natural Science Foundation of China(No.52071076)Opening Project of State Key Laboratory of Advanced Technology for Float Glass(Grant 2022KF03)are gratefully acknowledged.
文摘The produced water from the oilfield was purified with filter material and then injected back into the ground.The serpentine filter material was easy to harden with the increase in filtration amount,which affected the water quality.A superhydrophilic/underwater oleophobic serpentine filter material was successfully prepared by a simple method of coating modification,which exhibited long-lasting filtration of oily water,good filtration and anti-fouling properties,and resistance to harden.The film-forming material of the superhydrophilic/underwater oleophobic coating was composed of SiO_(2) particles with small size,which could completely and evenly cover the filter particle.The weight loss was only 7.6%after mechanical stirring for 90 min.Compared with the original filter material,the superhydrophilic/underwater oleophobic serpentine filter material showed a better anti-fouling ability and resistance to harden.The filtration of crude oil emulsion and oil slick sewage showed a better backwashing performance.After 35 cycles of continuous filtration of suspended solids in wastewater,the backwashing rate reached 78.4%.The results provided an effective method for the filtration of oily wastewater in the oilfield.
基金the Dongying Science Development Fund Project(Nos.DJ2022009 and DJ2020003)the Shandong Provincial Higher Education Research and Development Program(Science and Technology A Class)(No.J18KA201)+2 种基金the High-level Talent Research Start-up Fund of Shengli College of China University of Petroleum(No.KQ2019-008)the Chunhui Project of Shengli College of China University of Petroleum(No.KY2017004)the Research Cultivation Project of College of Big Data and Basic Science of Shandong Institute of Petroleum and Chemical Technology(No.XYPY2201)which supports are appreciated.
文摘CO_(2) immiscible flooding is an environmentally-friendly and effective method to enhance oil recovery in ultra-low permeability reservoirs.A mathematical model of CO_(2) immiscible flooding was developed,considering the variation in crude oil viscosity and starting pressure gradient in ultra-low permeability reservoirs based on the non-Darcy percolation theory.The mathematical model and numerical simulator were developed in the C++language to simulate the effects of fluid viscosity,starting pressure gradient,and other physical parameters on the distribution of the oil pressure field,oil saturation field,gas saturation field,oil viscosity field,and oil production.The results showed that the formation pressure and pressure propagation velocity in CO_(2) immiscible flooding were lower than the findings without considering the starting pressure gradient.The formation oil content saturation and the crude oil formation viscosity were higher after the consideration of the starting pressure gradient.The viscosity of crude oil considering the initiation pressure gradient during the formation was higher than that without this gradient,but the yield was lower than that condition.Our novel mathematical models helped the characterization of seepage resistance,revealed the influence of fluid property changes on seepage,improved the mathematical model of oil seepage in immiscible flooding processes,and guided the improvement of crude oil recovery in immiscible flooding processes.
