Research reactors with neutron fluxes higher than 10^(14) n cm^(−2) s^(−1) are widely used in nuclear fuel and material irradiation,neutron-based scientific research,and medical and industrial isotope production.Such ...Research reactors with neutron fluxes higher than 10^(14) n cm^(−2) s^(−1) are widely used in nuclear fuel and material irradiation,neutron-based scientific research,and medical and industrial isotope production.Such high flux research reactors are not only important scientific research facilities for the development of nuclear energy but also represent the national comprehensive technical capability.China has several high flux research reactors that do not satisfy the requirements of nuclear energy development.A high flux research reactor has the following features:a compact core arrangement,high power density,plate-type fuel elements,a short refueling cycle,and high coolant velocity in the core.These characteristics make it difficult to simultaneously realize high neutron flux and optimal safety margin.A new multi-mission high flux research reactor was designed by the Institute of Nuclear and New Energy Technology at Tsinghua University in China;the reactor can simul-taneously realize an average neutron flux higher than 2.0×10^(15) n cm^(−2) s^(−1) and fulfill the current safety criterion.This high flux research reactor features advanced design concepts and has sufficient safety margins according to the preliminary safety analysis.Based on the analysis of the station blackout accident,loss of coolant accident,and reactivity accident of a single-control drum rotating out accidently,the maximum temperature of the cladding surface,minimum departure from nucleate boiling ratio,and temperature difference to the onset of nucleate boiling temperature satisfy the design limits.展开更多
For dissimilar metal welds(DMWs)involving nickel-based weld metal(WM)and ferritic heat resistant steel base metal(BM)in power plants,there must be an interface between WM and BM,and this interface suffers mechanical a...For dissimilar metal welds(DMWs)involving nickel-based weld metal(WM)and ferritic heat resistant steel base metal(BM)in power plants,there must be an interface between WM and BM,and this interface suffers mechanical and microstructure mismatches and is often the rupture location of premature failure.In this study,a new form of WM/BM interface form,namely double Y-type interface was designed for the DMWs.Creep behaviors and life of DMWs containing double Y-type interface and conventional I-type interface were compared by finite element analysis and creep tests,and creep failure mechanisms were investigated by stress-strain analysis and microstructure characterization.By applying double Y-type interface instead of conventional I-type interface,failure location of DMW could be shifted from the WM/ferritic heat-affected zone(HAZ)interface into the ferritic HAZ or even the ferritic BM,and the failure mode change improved the creep life of DMW.The interface premature failure of I-type interface DMW was related to the coupling effect of microstructure degradation,stress and strain concentrations,and oxide notch on the WM/HAZ interface.The creep failure of double Y-type interface DMW was the result of Type IV fracture due to the creep voids and micro-cracks on fine-grain boundaries in HAZ,which was a result of the matrix softening of HAZ and lack of precipitate pinning at fine-grain boundaries.The double Y-type interface form separated the stress and strain concentrations in DMW from the WM/HAZ interface,preventing the trigger effect of oxide notch on interface failure and inhibiting the interfacial microstructure cracking.It is a novel scheme to prolong creep life and enhance reliability of DMW,by means of optimizing the interface form,decoupling the damage factors from WM/HAZ interface,and then changing the failure mechanism and shifting the failure location.展开更多
This study analysed the failure of dissimilar metal welds(DMWs)between ferritic heat resistant steels and austenitic stainless steels and investigated its influencing factors by means of numerical simulation,microstru...This study analysed the failure of dissimilar metal welds(DMWs)between ferritic heat resistant steels and austenitic stainless steels and investigated its influencing factors by means of numerical simulation,microstructure characterization and mechanical property test.Under the long-term high-temperature service condition in practical power plant,the DMW failure mode was along the interface between nickel-based weld metal(WM)and ferritic heat resistant steel,and the failure mechanism was stress/strain concentration,microstructure degradation and oxidation coupling acting on the interface.The numerical simulation results show that interface stress/strain concentration was due to the differences in coefficient of thermal expansion and creep strength,and the degree of stress/strain concentration was related to service time.The ferrite band formed at the WM/ferritic steel interface was prone to cracking,attracting the fracture along the interface.The interface crack allowed oxidation to develop along the WM/ferritic steel interface.During long-term service,the interface stress/strain concentration,microstructure and oxidation all evolved,which synergistically promoted interface failure of DMW.However,only under the long-term service of low stress conditions could trigger the interface failure of DMW.Meanwhile,long-term service would reduce the mechanical strength and plasticity of DMW.展开更多
Facing the challenges of in-situ utilization of lunar regolith resources,applying an external electric field to manipulate lunar particles has become a promising method for space particle control,which mainly depends ...Facing the challenges of in-situ utilization of lunar regolith resources,applying an external electric field to manipulate lunar particles has become a promising method for space particle control,which mainly depends on the particle charging properties in the applied electric field.Using the surficial lunar regolith samples brought back from the Moon by the Chang’e-5 mission(CE5 LS),this work successively studied their charging properties,particle dynamics,and their collision damages to aerospace materials under the action of an external electric field in high-vacuum conditions.The results indicated that the charging pro-cess and electrostatic projection of lunar regolith particles under high-vacuum conditions were different from those under atmosphere conditions.The particle diameter range of CE5 LS used in the experiment is 27.7-139.0 lm.For electric field strength of 3-12 kV·cm^(-1),the charge obtained by CE5 LS is 4.8×10^(-15)-4.7×10^(-13) C and the charge-to-mass ratio is 1.2×10^(-5)-6.8×10^(-4) C·kg^(-1).The CE5 LS is easier to be negatively charged in an external electric field.Furthermore,significant damages were observed on the target impact surfaces,indicating severe influences of lunar regolith particles on aerospace materials.Our work contributes to a more comprehensive understanding of physical mechanisms controlling the lunar regolith shielding and utilization,and will inspire broad efforts to develop the lunar in-situ engi-neering solutions.展开更多
To improve the understanding of coupling effect between dynamic recrystallization(DRX)behaviors and flow behaviors of as-cast AlCu4 SiMg, a finite element(FE) simulation equipped with the models of DRX evolution was i...To improve the understanding of coupling effect between dynamic recrystallization(DRX)behaviors and flow behaviors of as-cast AlCu4 SiMg, a finite element(FE) simulation equipped with the models of DRX evolution was implemented. A series of isothermal compression tests were performed primarily on a Gleeble-3500 thermo-mechanical simulator in a temperature range of 648-748 K and a strain rate range of 0.01-10 s-1.According to the measured true stress-strain data,the strain hardening rate curves(dσ/dε versus σ) were plotted to identify the critical strains for DRX initiation(εc). By further derivation of the related material constants, the DRX volume fraction equation and the strain for 50% DRX(ε0.5) equation were solved. Accordingly, the aforementioned DRX equations were implanted into the FE model to conduct a series of simulations for the isothermal compression tests. The results show that during the evolution of DRX volume fraction at a fixed strain rate, the strain required for the same amount of DRX volume fraction increases with decreasing temperature. In contrast, at a fixed temperature, it increases with increasing strain rate. Ultimately, the DRX kinetics model of AlCu4 SiMg alloy and the consequence of the FE analysis were validated by microstructure observations.展开更多
Two tests initiated by unscrammed control rod withdrawal were performed on the High Temperature GasCooled Reactor-Test Module(HTR-10) in November 2003 after the reactor achieved its full power, and the test conditions...Two tests initiated by unscrammed control rod withdrawal were performed on the High Temperature GasCooled Reactor-Test Module(HTR-10) in November 2003 after the reactor achieved its full power, and the test conditions represented a typical transient scenario of modular high-temperature reactors(HTRs), called pressurized loss of forced cooling, and anticipated transient without scram.Based on the test parameters, the HTR-10 thermal behaviors under the test conditions were studied with the help of the system analysis code THERMIX. The combination of the test results and the investigation results makes the HTR-10 safety potential better understood. Key phenomena, such as the helium natural circulation and the temperature redistribution in the reactor, were revealed. As the safety feature of most significance, there is a large margin between the maximum fuel temperature and its safety limit in each test. Temperatures of thermocouples in different components were calculated by THERMIX and compared with the test values. The applicability of the code was verified by good agreement obtained from the comparison.展开更多
It is challenging to balance the cyclability and rate capability of single crystal nickel-rich cathode materials(Ni>0.8).Multicomponent oxides by spray pyrolysis shows potential as highly-reactive precursors to syn...It is challenging to balance the cyclability and rate capability of single crystal nickel-rich cathode materials(Ni>0.8).Multicomponent oxides by spray pyrolysis shows potential as highly-reactive precursors to synthesize single crystal nickel-rich cathode at lower temperature,yet Ni^(2+)will severely inhibit particle growth when Ni content exceeds 0.9.Herein,lithium nitrate(LiNO_(3))with low melting point and strong oxidation is introduced as collaborate lithium salts for fabrication of well-dispersed submicron and micron single crystal LiNi_(0.9)Co_(0.055)Mn_(0.045)O_(2)(NCM90)cathode without extra unit operation.By changing amount of LiNO_(3),particle size regulation is realized and cation disorder can be diminished.The as-prepared material with optimal content of 4 wt%LiNO_(3)(NCM90-4 LN)displays the most appropriate particle size(1μm)with approximately stoichiometric structure,and presents better kinetics characterization of lithium-ion diffusion(15%higher than NCM90)and good electrochemical performance with specific discharge capacity of 220.6 and 173.8 mAh g^(-1) at 0.1 C and 10 C at room temperature,respectively.This work broadens the conventional research methodology of size regulation for single crystal Ni-rich cathode materials and is indispensable for the development of designing principal of nickel-rich cathode materials for lithium-ion batteries.展开更多
A numerical simulation study was performed to clarify the thermal mixing characteristics of coolant in the core bottom structure of the high-temperature gas-cooled reactor(HTR). The flow field and temperature field in...A numerical simulation study was performed to clarify the thermal mixing characteristics of coolant in the core bottom structure of the high-temperature gas-cooled reactor(HTR). The flow field and temperature field in the hot gas chamber and the hot gas duct of the HTR were obtained based on the commercial computational fluid dynamics(CFD) program. The numerical simulation results showed that the helium flow with different temperatures in the hot gas mixing chamber and the hot gas duct mixed intensively, and the mixing rate of the temperature in the outlet of the hot gas duct reached 98 %. The results indicated many large-scale swirling flow structures and strong turbulence in the hot gas mixing chamber and the entrance of the hot gas duct, which were responsible for the excellent thermal mixing of the hot gas chamber and the hot gas duct. The calculated results showed that the temperature mixing rate of the hot gas chamber decreased only marginally with increasing Reynolds number.展开更多
We analyse the porous structure of the packed beds in the heat transfer test facility built for high temperature gas cooled reactors from several aspects,such as oscillatory porosity,average porosity,thickness effect,...We analyse the porous structure of the packed beds in the heat transfer test facility built for high temperature gas cooled reactors from several aspects,such as oscillatory porosity,average porosity,thickness effect,coordination number and contact angle.An understanding and comparison of the porous structure of the facility bed and the real reactor core are developed to make recommendations for the design and analysis of the heat transfer test facility.The results show that there is very little difference between the porous characteristics of the two packed beds of spheres.展开更多
Most materials can be easily corroded or ineffective in carbonaceous atmospheres at high temperatures in the reactor core of the high temperature gas-cooled reactor(HTGR).To solve the problem,a material performance te...Most materials can be easily corroded or ineffective in carbonaceous atmospheres at high temperatures in the reactor core of the high temperature gas-cooled reactor(HTGR).To solve the problem,a material performance test apparatus was built to provide reliable materials and technical support for relevant experiments of the HTGR.The apparatus uses a center high-purity graphite heater and surrounding thermal insulating layers made of carbon fiber felt to form a strong carbon reducing atmosphere inside the apparatus.Specially designed tungsten rhenium thermocouples which can endure high temperatures in carbonaceous atmospheres are used to control the temperature field.A typical experimental process was analyzed in the paper,which lasted 76 hours including seven stages.Experimental results showed the test apparatus could completely simulate the carbon reduction atmosphere and high temperature environment the same as that confronted in the real reactor and the performance of screened materials had been successfully tested and verified.Test temperature in the apparatus could be elevated up to 1600oC,which covered the whole temperature range of the normal operation and accident condition of HTGR and could fully meet the test requirements of materials used in the reactor.展开更多
NG-CT-10 and NG-CT-20 are newly developed grades of nuclear-grade graphite from China.In this study,their oxidation behaviors were experimentally investigated using thermal gravimetric analysis.Microstructural evoluti...NG-CT-10 and NG-CT-20 are newly developed grades of nuclear-grade graphite from China.In this study,their oxidation behaviors were experimentally investigated using thermal gravimetric analysis.Microstructural evolution before and after oxidation was investigated using scanning electron microscope,mercury intrusion,and Raman spectroscopy.The apparent activation energy of NG-CT-10 nuclear graphite is 161.4 kJ/mol in a reaction temperature range of 550–700℃and that of NG-CT-20 is 153.5 kJ/mol in a temperature range of 550–650℃.The activation energy in the inner diffusion control regime is approximately half that in the kinetics control regime.At high temperatures,the binder phase is preferentially oxidized over the filler particles and small pores are generated in the binder.No new large or deep pores are generated on the graphite surfaces.Oxygen can diffuse along the boundaries of filler particles and through the binder phase,but cannot diffuse into the spaces between the nanocrystallites in the filler particles.Filler particles are oxidized starting at their outer surfaces,and the sizes of nanocrystallites do not decrease following oxidation.展开更多
Based on the model-and data-driven strategy,a spectroscopy learning method that can extract the novel and hidden information from the line list databases has been applied to the R branch emission spectra of 3-0 band o...Based on the model-and data-driven strategy,a spectroscopy learning method that can extract the novel and hidden information from the line list databases has been applied to the R branch emission spectra of 3-0 band of the ground electronic state of^(12)C^(16)O.The labeled line lists such as line intensities and Einstein A coefficients quoted in HITRAN2020 are collected to enhance the dataset.The quantified spectroscopy-learned spectroscopic constants is beneficial for improving the extrapolative accuracy beyond the measurements.Explicit comparisons are made for line positions,line intensities,Einstein A coefficients,which demonstrate that the model-and data-driven spectroscopy learning approach is a promising and an easy-to-implement strategy.展开更多
We performed high-level ab initio calculations on electronic structure of Na K. The potential energy curves (PECs) of 10 Λ-S states correlated with the three lowest dissociation limits have been calculated. On the ba...We performed high-level ab initio calculations on electronic structure of Na K. The potential energy curves (PECs) of 10 Λ-S states correlated with the three lowest dissociation limits have been calculated. On the basis of the calculated PECs, the spectroscopic constants of the boundΛ-S states are obtained, which are in good agreement with experimental results. The maximum vibrational quantum numbers of the singlet ground state X^1Σ^+ and the triplet ground state a^3Σ^+ have been analyzed with the semiclassical scattering theory. Transition properties including transition dipole moments, Franck-Condon factors, and radiative lifetimes have been investigated. The research results indicate that such calculations can provide fairly reliable estimation of parameters for the ultracold alkali diatomic molecular experiment.展开更多
To produce paraffin from hydrogenation/deoxygenation of palmitic acid,model compound of bio-oil obtained by hydrothermal liquefaction(HTL)of microalgae has been an attractive focus in recent years.In order to avoid en...To produce paraffin from hydrogenation/deoxygenation of palmitic acid,model compound of bio-oil obtained by hydrothermal liquefaction(HTL)of microalgae has been an attractive focus in recent years.In order to avoid energy-intensive separation process of water and bio-oil,it is of importance that deoxygenation upgrading of fatty acids under hydrothermal conditions similar to HTL process.Herein,it is the first time to explore the application of activated carbon(AC)-supported non-noble-metal catalysts,such as Ni,Co,and Mo,and so on,in the hydrothermal hydrogenation/deoxygenation of long-chain fatty acids,and the obtained Ni/AC-H(the Ni/AC was further H_(2)pre-reduced)is one of the best catalysts.In addition,it is found that the catalytic activity can be further improved by H_(2)pre-reduction of catalyst.Characterization results that are more low valences of nickel and oxygen vacancy can be obtained after H_(2)pre-reduction,thus significant promoting the deoxygenation especially the decarbonylation pathway of fatty acids.The total alkanes yield can reaches 95.9%at optimal conditions(280℃,360 min).This work confirmed that the low-priced AC-supported non-noble-metal catalysts have great potential compared with the noble-metal catalyst,in hydrothermal upgrading of bio-oil.展开更多
The determination of intrinsic deformation parameters inducing grain refinement mechanism of dynamic recrystallization (DRX) contributes to the relative forming process design. For Ni80A superalloy, the processing map...The determination of intrinsic deformation parameters inducing grain refinement mechanism of dynamic recrystallization (DRX) contributes to the relative forming process design. For Ni80A superalloy, the processing maps were constructed by the derivation of the stress-strain data coming from a series of isothermal compression tests at temperatures of 1273^-1473 K and strain rates of 0.01-10 s^-1. According to the processing maps and microstructural validation, the deformation parameter windows with DRX mechanism were separated in an innovative deformation mechanism map. In addition, the deformation activation energy representing deformation energy barrier was introduced to further optimize such windows. Finally, the enhanced processing maps were constructed and the parameter domains corresponding to DRX mechanism and lower deformation barrier were determined as follows: at ε=0.3, domains: 1296-1350 K, 0.056-0.32 s^-1 and 1350-1375 K, 0.035-0.11 s^-1;at ε=0.5, domains: 1290-1348 K, 0.2-0.5 s^-1 and 1305-1370 K, 0.035-0.2 s^-1;at ε=0.7, domains: 1290-1355 K, 0.042-0.26 s^-1;at ε=0.9, domains: 1298-1348 K, 0.037-0.224 s^-1.展开更多
A gas-cooled nuclear reactor combined with a Brayton cycle shows promise as a technology for highpower space nuclear power systems.Generally,a helium-xenon gas mixture with a molecular weight of14.5-40.0 g/mol is adop...A gas-cooled nuclear reactor combined with a Brayton cycle shows promise as a technology for highpower space nuclear power systems.Generally,a helium-xenon gas mixture with a molecular weight of14.5-40.0 g/mol is adopted as the working fluid to reduce the mass and volume of the turbomachinery.The Prandtl number for helium-xenon mixtures with this recommended mixing ratio may be as low as 0.2.As the convective heat transfer is closely related to the Prandtl number,different heat transfer correlations are often needed for fluids with various Prandtl numbers.Previous studies have established heat transfer correlations for fluids with medium-high Prandtl numbers(such as air and water)and extremely lowPrandtl fluids(such as liquid metals);however,these correlations cannot be directly recommended for such helium-xenon mixtures without verification.This study initially assessed the applicability of existing Nusselt number correlations,finding that the selected correlations are unsuitable for helium-xenon mixtures.To establish a more general heat transfer correlation,a theoretical derivation was conducted using the turbulent boundary layer theory.Numerical simulations of turbulent heat transfer for helium-xenon mixtures were carried out using Ansys Fluent.Based on simulated results,the parameters in the derived heat transfer correlation are determined.It is found that calculations using the new correlation were in good agreement with the experimental data,verifying its applicability to the turbulent heat transfer for helium-xenon mixtures.The effect of variable gas properties on turbulent heat transfer was also analyzed,and a modified heat transfer correlation with the temperature ratio was established.Based on the working conditions adopted in this study,the numerical error of the property-variable heat transfer correlation was almost within 10%.展开更多
The HTR-PM600 high-temperature gas-cooled reactor nuclear power plant is based on the technology of the high-temperature gas-cooled reactor pebble-bed module(HTR-PM)demonstration project.It utilizes proven HTR-PM reac...The HTR-PM600 high-temperature gas-cooled reactor nuclear power plant is based on the technology of the high-temperature gas-cooled reactor pebble-bed module(HTR-PM)demonstration project.It utilizes proven HTR-PM reactor and steam generator modules with a thermal power of 250 MW_(th)and power generation of approximately 100 MW_(e)per module.Six modules in parallel,connected to a steam turbine,form a 600-MW_(e)nuclear power plant.In addition,its system configuration in the nuclear island is identical to that of the HTR-PM in which the technical risks are minimized.Under this principle,the HTR-PM600 achieves the same level of inherent safety as the HTR-PM.The concept of a ventilated lowpressure containment(VLPC)is unchanged;however,a large circular VLPC accommodating all six reactor modules is adopted rather than the previous small-cavity-type VLPC,which contains only one module,as defined for the HTR-PM.The layout of the nuclear island and its associated systems refer to single-unit pressurized water reactor(PWR)practices.With this layout,the HTR-PM600achieves a volume size of the nuclear island that is comparable to a domestic PWR of the same power level.This will be a GenerationⅣnuclear energy technology that is economically competitive.展开更多
Recently,a Rydberg atom-based mixer was developed to measure the phase of a radio frequency(RF)field.The phase of the signal RF(SIG RF)field is down-converted directly to the phase of a beat signal created by the pres...Recently,a Rydberg atom-based mixer was developed to measure the phase of a radio frequency(RF)field.The phase of the signal RF(SIG RF)field is down-converted directly to the phase of a beat signal created by the presence of a local RF(LO RF)field.In this study,we propose that the Rydberg atom-based mixer can be converted to an all-optical phase detector by amplitude modulation(AM)of the LO RF field;that is,the phase of the SIG RF field is related to both the amplitude and phase of the beat signal.When the AM frequency of the LO RF field is the same as the frequency of the beat signal,the beat signal will further interfere with the AM of the LO RF field inside the atom,and then the amplitude of the beat signal is related to the phase of the SIG RF field.The amplitude of the beat signal and the phase of the SIG RF field show a linear relationship within the range of 0 toπ/2 when the phase of the AM is set with a differenceπ/4 from the phase of the LO RF field.The minimum phase resolution can be as small as 0.6°by optimizing the experimental conditions according to a simple theoretical model.This study will expand and contribute to the development of RF measurement devices based on Rydberg atoms.展开更多
The wavelet approach is introduced to study the influence of the natural convection stagnation point flow of the Williamson fluid in the presence of thermophysical and Brownian motion effects. The thermal radiation ef...The wavelet approach is introduced to study the influence of the natural convection stagnation point flow of the Williamson fluid in the presence of thermophysical and Brownian motion effects. The thermal radiation effects are considered along a permeable stretching surface. The nonlinear problem is simulated numerically by using a novel algorithm based upon the Chebyshev wavelets. It is noticed that the velocity of the Williamson fluid increases for assisting flow cases while decreases for opposing flow cases when the unsteadiness and suction parameters increase, and the magnetic effect on the velocity increases for opposing flow cases while decreases for assisting flow cases. When the thermal radiation parameter, the Dufour number, and Williamson’s fluid parameter increase, the temperature increases for both assisting and opposing flow cases. Meanwhile, the temperature decreases when the Prandtl number increases. The concentration decreases when the Soret parameter increases, while increases when the Schmidt number increases. It is perceived that the assisting force decreases more than the opposing force. The findings endorse the credibility of the proposed algorithm, and could be extended to other nonlinear problems with complex nature.展开更多
Chrome-molybdenum steel(2·1/4Cr1Mo) is one of the main products of steam generation.The adsorption behaviors of radioactive fission products on2·1/4Cr1Mo surface are critical in the analysis of HTR-PM.Here,t...Chrome-molybdenum steel(2·1/4Cr1Mo) is one of the main products of steam generation.The adsorption behaviors of radioactive fission products on2·1/4Cr1Mo surface are critical in the analysis of HTR-PM.Here,the adsorption behavior of cesium,strontium,silver and iodine on 2·1/4Cr1Mo was investigated with first-principle calculations that the Ag and I atoms prefer to be adsorbed at the square hollow site of the face-centered cubic iron cell with a binding energy of about 1 and 3 eV,respectively.In contrast,Cs and Sr atoms are not adsorbed on the surface of the 2·1/4Cr1Mo.These results are again confirmed via analysis of charge density differences and the densities of state.Furthermore,the adsorption rates of these fission products show that only I and Ag have significant adsorption on the metal substrate.These adsorption results explain the amount of adsorbed radionuclides for an evaluation of nuclear safety in HTR-PM.These micro-pictures of the interaction between fission products and materials are a new and useful way to analyze the source term.展开更多
文摘Research reactors with neutron fluxes higher than 10^(14) n cm^(−2) s^(−1) are widely used in nuclear fuel and material irradiation,neutron-based scientific research,and medical and industrial isotope production.Such high flux research reactors are not only important scientific research facilities for the development of nuclear energy but also represent the national comprehensive technical capability.China has several high flux research reactors that do not satisfy the requirements of nuclear energy development.A high flux research reactor has the following features:a compact core arrangement,high power density,plate-type fuel elements,a short refueling cycle,and high coolant velocity in the core.These characteristics make it difficult to simultaneously realize high neutron flux and optimal safety margin.A new multi-mission high flux research reactor was designed by the Institute of Nuclear and New Energy Technology at Tsinghua University in China;the reactor can simul-taneously realize an average neutron flux higher than 2.0×10^(15) n cm^(−2) s^(−1) and fulfill the current safety criterion.This high flux research reactor features advanced design concepts and has sufficient safety margins according to the preliminary safety analysis.Based on the analysis of the station blackout accident,loss of coolant accident,and reactivity accident of a single-control drum rotating out accidently,the maximum temperature of the cladding surface,minimum departure from nucleate boiling ratio,and temperature difference to the onset of nucleate boiling temperature satisfy the design limits.
基金Supported by Youth Elite Project of CNNC and Modular HTGR Super-critical Power Generation Technology Collaborative Project between CNNC and Tsinghua University Project of China(Grant No.ZHJTIZYFGWD20201).
文摘For dissimilar metal welds(DMWs)involving nickel-based weld metal(WM)and ferritic heat resistant steel base metal(BM)in power plants,there must be an interface between WM and BM,and this interface suffers mechanical and microstructure mismatches and is often the rupture location of premature failure.In this study,a new form of WM/BM interface form,namely double Y-type interface was designed for the DMWs.Creep behaviors and life of DMWs containing double Y-type interface and conventional I-type interface were compared by finite element analysis and creep tests,and creep failure mechanisms were investigated by stress-strain analysis and microstructure characterization.By applying double Y-type interface instead of conventional I-type interface,failure location of DMW could be shifted from the WM/ferritic heat-affected zone(HAZ)interface into the ferritic HAZ or even the ferritic BM,and the failure mode change improved the creep life of DMW.The interface premature failure of I-type interface DMW was related to the coupling effect of microstructure degradation,stress and strain concentrations,and oxide notch on the WM/HAZ interface.The creep failure of double Y-type interface DMW was the result of Type IV fracture due to the creep voids and micro-cracks on fine-grain boundaries in HAZ,which was a result of the matrix softening of HAZ and lack of precipitate pinning at fine-grain boundaries.The double Y-type interface form separated the stress and strain concentrations in DMW from the WM/HAZ interface,preventing the trigger effect of oxide notch on interface failure and inhibiting the interfacial microstructure cracking.It is a novel scheme to prolong creep life and enhance reliability of DMW,by means of optimizing the interface form,decoupling the damage factors from WM/HAZ interface,and then changing the failure mechanism and shifting the failure location.
基金Supported by Youth Elite Project of CNNC and Modular HTGR Super-critical Power Generation Technology collaborative project between CNNC and Tsinghua University Project (Grant No.ZHJTIZYFGWD20201)。
文摘This study analysed the failure of dissimilar metal welds(DMWs)between ferritic heat resistant steels and austenitic stainless steels and investigated its influencing factors by means of numerical simulation,microstructure characterization and mechanical property test.Under the long-term high-temperature service condition in practical power plant,the DMW failure mode was along the interface between nickel-based weld metal(WM)and ferritic heat resistant steel,and the failure mechanism was stress/strain concentration,microstructure degradation and oxidation coupling acting on the interface.The numerical simulation results show that interface stress/strain concentration was due to the differences in coefficient of thermal expansion and creep strength,and the degree of stress/strain concentration was related to service time.The ferrite band formed at the WM/ferritic steel interface was prone to cracking,attracting the fracture along the interface.The interface crack allowed oxidation to develop along the WM/ferritic steel interface.During long-term service,the interface stress/strain concentration,microstructure and oxidation all evolved,which synergistically promoted interface failure of DMW.However,only under the long-term service of low stress conditions could trigger the interface failure of DMW.Meanwhile,long-term service would reduce the mechanical strength and plasticity of DMW.
基金the China National Space Administration(sample No.CE5C0400)supported by the National Natural Science Foundation of China(U22B2092 and 51725601)Beijing Nova Program(20230484334),and Lunar Exploration and Space Engineering Center.
文摘Facing the challenges of in-situ utilization of lunar regolith resources,applying an external electric field to manipulate lunar particles has become a promising method for space particle control,which mainly depends on the particle charging properties in the applied electric field.Using the surficial lunar regolith samples brought back from the Moon by the Chang’e-5 mission(CE5 LS),this work successively studied their charging properties,particle dynamics,and their collision damages to aerospace materials under the action of an external electric field in high-vacuum conditions.The results indicated that the charging pro-cess and electrostatic projection of lunar regolith particles under high-vacuum conditions were different from those under atmosphere conditions.The particle diameter range of CE5 LS used in the experiment is 27.7-139.0 lm.For electric field strength of 3-12 kV·cm^(-1),the charge obtained by CE5 LS is 4.8×10^(-15)-4.7×10^(-13) C and the charge-to-mass ratio is 1.2×10^(-5)-6.8×10^(-4) C·kg^(-1).The CE5 LS is easier to be negatively charged in an external electric field.Furthermore,significant damages were observed on the target impact surfaces,indicating severe influences of lunar regolith particles on aerospace materials.Our work contributes to a more comprehensive understanding of physical mechanisms controlling the lunar regolith shielding and utilization,and will inspire broad efforts to develop the lunar in-situ engi-neering solutions.
基金Project(cstc2016jcyjA0335)supported by Chongqing Foundation and Frontier Research,ChinaProject(P2017-020)supported by Open Fund Project of State Key Laboratory of Materials Processing and Die&Mould Technology,China
文摘To improve the understanding of coupling effect between dynamic recrystallization(DRX)behaviors and flow behaviors of as-cast AlCu4 SiMg, a finite element(FE) simulation equipped with the models of DRX evolution was implemented. A series of isothermal compression tests were performed primarily on a Gleeble-3500 thermo-mechanical simulator in a temperature range of 648-748 K and a strain rate range of 0.01-10 s-1.According to the measured true stress-strain data,the strain hardening rate curves(dσ/dε versus σ) were plotted to identify the critical strains for DRX initiation(εc). By further derivation of the related material constants, the DRX volume fraction equation and the strain for 50% DRX(ε0.5) equation were solved. Accordingly, the aforementioned DRX equations were implanted into the FE model to conduct a series of simulations for the isothermal compression tests. The results show that during the evolution of DRX volume fraction at a fixed strain rate, the strain required for the same amount of DRX volume fraction increases with decreasing temperature. In contrast, at a fixed temperature, it increases with increasing strain rate. Ultimately, the DRX kinetics model of AlCu4 SiMg alloy and the consequence of the FE analysis were validated by microstructure observations.
基金supported by the Chinese National S&T Major Project(No.ZX069)
文摘Two tests initiated by unscrammed control rod withdrawal were performed on the High Temperature GasCooled Reactor-Test Module(HTR-10) in November 2003 after the reactor achieved its full power, and the test conditions represented a typical transient scenario of modular high-temperature reactors(HTRs), called pressurized loss of forced cooling, and anticipated transient without scram.Based on the test parameters, the HTR-10 thermal behaviors under the test conditions were studied with the help of the system analysis code THERMIX. The combination of the test results and the investigation results makes the HTR-10 safety potential better understood. Key phenomena, such as the helium natural circulation and the temperature redistribution in the reactor, were revealed. As the safety feature of most significance, there is a large margin between the maximum fuel temperature and its safety limit in each test. Temperatures of thermocouples in different components were calculated by THERMIX and compared with the test values. The applicability of the code was verified by good agreement obtained from the comparison.
基金financially supported by the National Natural Science of China (Grant Nos. 51834008, 51874360)the National Key Research and Development Program of China (Grant No. 2018YFC1902205)。
文摘It is challenging to balance the cyclability and rate capability of single crystal nickel-rich cathode materials(Ni>0.8).Multicomponent oxides by spray pyrolysis shows potential as highly-reactive precursors to synthesize single crystal nickel-rich cathode at lower temperature,yet Ni^(2+)will severely inhibit particle growth when Ni content exceeds 0.9.Herein,lithium nitrate(LiNO_(3))with low melting point and strong oxidation is introduced as collaborate lithium salts for fabrication of well-dispersed submicron and micron single crystal LiNi_(0.9)Co_(0.055)Mn_(0.045)O_(2)(NCM90)cathode without extra unit operation.By changing amount of LiNO_(3),particle size regulation is realized and cation disorder can be diminished.The as-prepared material with optimal content of 4 wt%LiNO_(3)(NCM90-4 LN)displays the most appropriate particle size(1μm)with approximately stoichiometric structure,and presents better kinetics characterization of lithium-ion diffusion(15%higher than NCM90)and good electrochemical performance with specific discharge capacity of 220.6 and 173.8 mAh g^(-1) at 0.1 C and 10 C at room temperature,respectively.This work broadens the conventional research methodology of size regulation for single crystal Ni-rich cathode materials and is indispensable for the development of designing principal of nickel-rich cathode materials for lithium-ion batteries.
基金Supported by National Natural Science Foundation of China (No. 11375099)
文摘A numerical simulation study was performed to clarify the thermal mixing characteristics of coolant in the core bottom structure of the high-temperature gas-cooled reactor(HTR). The flow field and temperature field in the hot gas chamber and the hot gas duct of the HTR were obtained based on the commercial computational fluid dynamics(CFD) program. The numerical simulation results showed that the helium flow with different temperatures in the hot gas mixing chamber and the hot gas duct mixed intensively, and the mixing rate of the temperature in the outlet of the hot gas duct reached 98 %. The results indicated many large-scale swirling flow structures and strong turbulence in the hot gas mixing chamber and the entrance of the hot gas duct, which were responsible for the excellent thermal mixing of the hot gas chamber and the hot gas duct. The calculated results showed that the temperature mixing rate of the hot gas chamber decreased only marginally with increasing Reynolds number.
基金Supported by the National Science and Technology Major Project under Grant No ZX06901the National Natural Science Foundation of China under Grant No 11072131.
文摘We analyse the porous structure of the packed beds in the heat transfer test facility built for high temperature gas cooled reactors from several aspects,such as oscillatory porosity,average porosity,thickness effect,coordination number and contact angle.An understanding and comparison of the porous structure of the facility bed and the real reactor core are developed to make recommendations for the design and analysis of the heat transfer test facility.The results show that there is very little difference between the porous characteristics of the two packed beds of spheres.
基金Supported by the National S&T Major Project of China(No.ZX06901)the National Natural Science Foundation of China(No 11072131)
文摘Most materials can be easily corroded or ineffective in carbonaceous atmospheres at high temperatures in the reactor core of the high temperature gas-cooled reactor(HTGR).To solve the problem,a material performance test apparatus was built to provide reliable materials and technical support for relevant experiments of the HTGR.The apparatus uses a center high-purity graphite heater and surrounding thermal insulating layers made of carbon fiber felt to form a strong carbon reducing atmosphere inside the apparatus.Specially designed tungsten rhenium thermocouples which can endure high temperatures in carbonaceous atmospheres are used to control the temperature field.A typical experimental process was analyzed in the paper,which lasted 76 hours including seven stages.Experimental results showed the test apparatus could completely simulate the carbon reduction atmosphere and high temperature environment the same as that confronted in the real reactor and the performance of screened materials had been successfully tested and verified.Test temperature in the apparatus could be elevated up to 1600oC,which covered the whole temperature range of the normal operation and accident condition of HTGR and could fully meet the test requirements of materials used in the reactor.
基金financially supported by the National Natural Science Foundation of China(No.51576103)the National S&T Major Project(No.ZX06901)
文摘NG-CT-10 and NG-CT-20 are newly developed grades of nuclear-grade graphite from China.In this study,their oxidation behaviors were experimentally investigated using thermal gravimetric analysis.Microstructural evolution before and after oxidation was investigated using scanning electron microscope,mercury intrusion,and Raman spectroscopy.The apparent activation energy of NG-CT-10 nuclear graphite is 161.4 kJ/mol in a reaction temperature range of 550–700℃and that of NG-CT-20 is 153.5 kJ/mol in a temperature range of 550–650℃.The activation energy in the inner diffusion control regime is approximately half that in the kinetics control regime.At high temperatures,the binder phase is preferentially oxidized over the filler particles and small pores are generated in the binder.No new large or deep pores are generated on the graphite surfaces.Oxygen can diffuse along the boundaries of filler particles and through the binder phase,but cannot diffuse into the spaces between the nanocrystallites in the filler particles.Filler particles are oxidized starting at their outer surfaces,and the sizes of nanocrystallites do not decrease following oxidation.
基金Project supported by the Open Research Fund of Computational Physics Key Laboratory of Sichuan Province,Yibin University(Grant No.YBXYJSWLZD-2020-006)the Funds for Sichuan Distinguished Scientists of China(Grant Nos.2019JDJQ0050 and 2019JDJQ0051)+3 种基金the National Natural Science Foundation of China(Grant Nos.61722507 and 11904295)the National Undergraduate Innovation and Entrepreneurship Training Program of China(Grant No.S202110650046)the State Key Laboratory Open Fund of Quantum Optics and Quantum Optics Devices,Laser Spectroscopy Laboratory(Grant No.KF201811)the Open Research Fund Program of the Collaborative Innovation Center of Extreme Optics(Grant No.KF2020003)。
文摘Based on the model-and data-driven strategy,a spectroscopy learning method that can extract the novel and hidden information from the line list databases has been applied to the R branch emission spectra of 3-0 band of the ground electronic state of^(12)C^(16)O.The labeled line lists such as line intensities and Einstein A coefficients quoted in HITRAN2020 are collected to enhance the dataset.The quantified spectroscopy-learned spectroscopic constants is beneficial for improving the extrapolative accuracy beyond the measurements.Explicit comparisons are made for line positions,line intensities,Einstein A coefficients,which demonstrate that the model-and data-driven spectroscopy learning approach is a promising and an easy-to-implement strategy.
基金supported by the National Key Research and Development Program of China(No.2017YFA0304900,No.2017YFA0402300,and No.2016YFA0300600)the Strategic Priority Research Program of Chinese Academy of Sciences(No.XDB28000000 and No.XDB07030000)+2 种基金the National Natural Science Foundation of China(No.11604334,No.11575099 and No.11474347)the Open Research Fund Program of the State Key Laboratory of Low-Dimensional Quantum Physics(No.KF201807)the Science Challenge Project(No.TZ2016005)
文摘We performed high-level ab initio calculations on electronic structure of Na K. The potential energy curves (PECs) of 10 Λ-S states correlated with the three lowest dissociation limits have been calculated. On the basis of the calculated PECs, the spectroscopic constants of the boundΛ-S states are obtained, which are in good agreement with experimental results. The maximum vibrational quantum numbers of the singlet ground state X^1Σ^+ and the triplet ground state a^3Σ^+ have been analyzed with the semiclassical scattering theory. Transition properties including transition dipole moments, Franck-Condon factors, and radiative lifetimes have been investigated. The research results indicate that such calculations can provide fairly reliable estimation of parameters for the ultracold alkali diatomic molecular experiment.
基金the financial support from National Natural Science Foundation of China(21838006,21776159)National Key Research and Development Program of China(2018YFC1902101)。
文摘To produce paraffin from hydrogenation/deoxygenation of palmitic acid,model compound of bio-oil obtained by hydrothermal liquefaction(HTL)of microalgae has been an attractive focus in recent years.In order to avoid energy-intensive separation process of water and bio-oil,it is of importance that deoxygenation upgrading of fatty acids under hydrothermal conditions similar to HTL process.Herein,it is the first time to explore the application of activated carbon(AC)-supported non-noble-metal catalysts,such as Ni,Co,and Mo,and so on,in the hydrothermal hydrogenation/deoxygenation of long-chain fatty acids,and the obtained Ni/AC-H(the Ni/AC was further H_(2)pre-reduced)is one of the best catalysts.In addition,it is found that the catalytic activity can be further improved by H_(2)pre-reduction of catalyst.Characterization results that are more low valences of nickel and oxygen vacancy can be obtained after H_(2)pre-reduction,thus significant promoting the deoxygenation especially the decarbonylation pathway of fatty acids.The total alkanes yield can reaches 95.9%at optimal conditions(280℃,360 min).This work confirmed that the low-priced AC-supported non-noble-metal catalysts have great potential compared with the noble-metal catalyst,in hydrothermal upgrading of bio-oil.
基金Project(cstc2018jcyj AX0459)supported by Chongqing Basic Research and Frontier Exploration,ChinaProject(P2017-020)supported by Open Fund Project of State Key Laboratory of Materials Processing and Die&Mould Technology,ChinaProject(SKLMTZZKT-2017M15)supported by Research Project of State Key Laboratory of Mechanical Transmission,China
文摘The determination of intrinsic deformation parameters inducing grain refinement mechanism of dynamic recrystallization (DRX) contributes to the relative forming process design. For Ni80A superalloy, the processing maps were constructed by the derivation of the stress-strain data coming from a series of isothermal compression tests at temperatures of 1273^-1473 K and strain rates of 0.01-10 s^-1. According to the processing maps and microstructural validation, the deformation parameter windows with DRX mechanism were separated in an innovative deformation mechanism map. In addition, the deformation activation energy representing deformation energy barrier was introduced to further optimize such windows. Finally, the enhanced processing maps were constructed and the parameter domains corresponding to DRX mechanism and lower deformation barrier were determined as follows: at ε=0.3, domains: 1296-1350 K, 0.056-0.32 s^-1 and 1350-1375 K, 0.035-0.11 s^-1;at ε=0.5, domains: 1290-1348 K, 0.2-0.5 s^-1 and 1305-1370 K, 0.035-0.2 s^-1;at ε=0.7, domains: 1290-1355 K, 0.042-0.26 s^-1;at ε=0.9, domains: 1298-1348 K, 0.037-0.224 s^-1.
基金supported by the National Key Research and Development Program of China(No.2018YFB1900501)the CNSA program(No.D010501)。
文摘A gas-cooled nuclear reactor combined with a Brayton cycle shows promise as a technology for highpower space nuclear power systems.Generally,a helium-xenon gas mixture with a molecular weight of14.5-40.0 g/mol is adopted as the working fluid to reduce the mass and volume of the turbomachinery.The Prandtl number for helium-xenon mixtures with this recommended mixing ratio may be as low as 0.2.As the convective heat transfer is closely related to the Prandtl number,different heat transfer correlations are often needed for fluids with various Prandtl numbers.Previous studies have established heat transfer correlations for fluids with medium-high Prandtl numbers(such as air and water)and extremely lowPrandtl fluids(such as liquid metals);however,these correlations cannot be directly recommended for such helium-xenon mixtures without verification.This study initially assessed the applicability of existing Nusselt number correlations,finding that the selected correlations are unsuitable for helium-xenon mixtures.To establish a more general heat transfer correlation,a theoretical derivation was conducted using the turbulent boundary layer theory.Numerical simulations of turbulent heat transfer for helium-xenon mixtures were carried out using Ansys Fluent.Based on simulated results,the parameters in the derived heat transfer correlation are determined.It is found that calculations using the new correlation were in good agreement with the experimental data,verifying its applicability to the turbulent heat transfer for helium-xenon mixtures.The effect of variable gas properties on turbulent heat transfer was also analyzed,and a modified heat transfer correlation with the temperature ratio was established.Based on the working conditions adopted in this study,the numerical error of the property-variable heat transfer correlation was almost within 10%.
基金supported by the National S&T Major Project (No.ZX069)
文摘The HTR-PM600 high-temperature gas-cooled reactor nuclear power plant is based on the technology of the high-temperature gas-cooled reactor pebble-bed module(HTR-PM)demonstration project.It utilizes proven HTR-PM reactor and steam generator modules with a thermal power of 250 MW_(th)and power generation of approximately 100 MW_(e)per module.Six modules in parallel,connected to a steam turbine,form a 600-MW_(e)nuclear power plant.In addition,its system configuration in the nuclear island is identical to that of the HTR-PM in which the technical risks are minimized.Under this principle,the HTR-PM600 achieves the same level of inherent safety as the HTR-PM.The concept of a ventilated lowpressure containment(VLPC)is unchanged;however,a large circular VLPC accommodating all six reactor modules is adopted rather than the previous small-cavity-type VLPC,which contains only one module,as defined for the HTR-PM.The layout of the nuclear island and its associated systems refer to single-unit pressurized water reactor(PWR)practices.With this layout,the HTR-PM600achieves a volume size of the nuclear island that is comparable to a domestic PWR of the same power level.This will be a GenerationⅣnuclear energy technology that is economically competitive.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2017YFA0304900 and 2017YFA0402300)the Beijing Natural Science Foundation(Grant No.1212014)+3 种基金the National Natural Science Foundation of China(Grant Nos.11604334,11604177,and U2031125)the Key Research Program of the Chinese Academy of Sciences(Grant No.XDPB08-3)the Open Research Fund Program of the State Key Laboratory of Low-Dimensional Quantum Physics(Grant No.KF201807)the Fundamental Research Funds for the Central Universities,and Youth Innovation Promotion Association CAS.
文摘Recently,a Rydberg atom-based mixer was developed to measure the phase of a radio frequency(RF)field.The phase of the signal RF(SIG RF)field is down-converted directly to the phase of a beat signal created by the presence of a local RF(LO RF)field.In this study,we propose that the Rydberg atom-based mixer can be converted to an all-optical phase detector by amplitude modulation(AM)of the LO RF field;that is,the phase of the SIG RF field is related to both the amplitude and phase of the beat signal.When the AM frequency of the LO RF field is the same as the frequency of the beat signal,the beat signal will further interfere with the AM of the LO RF field inside the atom,and then the amplitude of the beat signal is related to the phase of the SIG RF field.The amplitude of the beat signal and the phase of the SIG RF field show a linear relationship within the range of 0 toπ/2 when the phase of the AM is set with a differenceπ/4 from the phase of the LO RF field.The minimum phase resolution can be as small as 0.6°by optimizing the experimental conditions according to a simple theoretical model.This study will expand and contribute to the development of RF measurement devices based on Rydberg atoms.
基金Project supported by the National Natural Science Foundation of China(Nos.51709191,51706149,and 51606130)the Key Laboratory of Advanced Reactor Engineering and Safety,Ministry of Education of China(No.ARES-2018-10)the State Key Laboratory of Hydraulics and Mountain River Engineering of Sichuan University of China(No.Skhl1803)
文摘The wavelet approach is introduced to study the influence of the natural convection stagnation point flow of the Williamson fluid in the presence of thermophysical and Brownian motion effects. The thermal radiation effects are considered along a permeable stretching surface. The nonlinear problem is simulated numerically by using a novel algorithm based upon the Chebyshev wavelets. It is noticed that the velocity of the Williamson fluid increases for assisting flow cases while decreases for opposing flow cases when the unsteadiness and suction parameters increase, and the magnetic effect on the velocity increases for opposing flow cases while decreases for assisting flow cases. When the thermal radiation parameter, the Dufour number, and Williamson’s fluid parameter increase, the temperature increases for both assisting and opposing flow cases. Meanwhile, the temperature decreases when the Prandtl number increases. The concentration decreases when the Soret parameter increases, while increases when the Schmidt number increases. It is perceived that the assisting force decreases more than the opposing force. The findings endorse the credibility of the proposed algorithm, and could be extended to other nonlinear problems with complex nature.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.ZX06901)
文摘Chrome-molybdenum steel(2·1/4Cr1Mo) is one of the main products of steam generation.The adsorption behaviors of radioactive fission products on2·1/4Cr1Mo surface are critical in the analysis of HTR-PM.Here,the adsorption behavior of cesium,strontium,silver and iodine on 2·1/4Cr1Mo was investigated with first-principle calculations that the Ag and I atoms prefer to be adsorbed at the square hollow site of the face-centered cubic iron cell with a binding energy of about 1 and 3 eV,respectively.In contrast,Cs and Sr atoms are not adsorbed on the surface of the 2·1/4Cr1Mo.These results are again confirmed via analysis of charge density differences and the densities of state.Furthermore,the adsorption rates of these fission products show that only I and Ag have significant adsorption on the metal substrate.These adsorption results explain the amount of adsorbed radionuclides for an evaluation of nuclear safety in HTR-PM.These micro-pictures of the interaction between fission products and materials are a new and useful way to analyze the source term.
