In order to satisfy the requirement of high precision measurement in a high dynamic environment, a kind of gyro aided multi-accelerometer inertial measurement unit （GAMA-IMU） with six accelerometers and two gyros （...In order to satisfy the requirement of high precision measurement in a high dynamic environment, a kind of gyro aided multi-accelerometer inertial measurement unit （GAMA-IMU） with six accelerometers and two gyros （6A2G） was proposed in this paper. The available configurations have the problem of low measurement precision In a high dynamic environment due to channel coupling. The three channels were decoupled when calculating the angular velocity in the proposed configuration. The yawing and pitching angular velocity were directly measured by gyros, while only the rolling angular velocity was obtained by the GAMA-IMU indirectly from the rolling angular acceleration and quadratic component of rolling angular velocity. Then a single channel rolling angular velocity calculation model was established and the extended Kalman filter （EKF） was used to do state esti- mation. Simulations were carried out and results indicated that the calculation precision of the proposed 6A2G configuration could meet the demand of high precision measurement for a high-speed rotating carrier.展开更多
A rigid flexible coupling physical model which can represent a flexible spacecraft is investigated in this paper. By applying the mechanics theory in a non-inertial coordinate system,the rigid flexible coupling dynami...A rigid flexible coupling physical model which can represent a flexible spacecraft is investigated in this paper. By applying the mechanics theory in a non-inertial coordinate system,the rigid flexible coupling dynamic model with dynamic stiffening is established via the subsystemmodeling framework. It is clearly elucidated for the first time that,dynamic stiffening is produced by the coupling effect of the centrifugal inertial load distributed on the beamand the transverse vibration deformation of the beam. The modeling approach in this paper successfully avoids problems which are caused by other popular modeling methods nowadays： the derivation process is too complex by using only one dynamic principle; a clearly theoretical explanation for dynamic stiffening can＇t be provided. First,the continuous dynamic models of the flexible beamand the central rigid body are established via structural dynamics and angular momentumtheory respectively. Then,based on the conclusions of orthogonalization about the normal constrained modes,the finite dimensional dynamic model suitable for controller design is obtained. The numerical simulation validations showthat： dynamic stiffening is successfully incorporated into the dynamic characteristics of the first-order model established in this paper,which can indicate the dynamic responses of the rigid flexible coupling system with large overall motion accurately,and has a clear modeling mechanism,concise expressions and a good convergence.展开更多
The rigid flexible coupling system with a mass at non-tip position of the flexible beam is studied in this paper. Using the theory about mechanics problems in a non-inertial coordinate sys- tem, the dynamic equations ...The rigid flexible coupling system with a mass at non-tip position of the flexible beam is studied in this paper. Using the theory about mechanics problems in a non-inertial coordinate sys- tem, the dynamic equations of the rigid flexible coupling system with dynamic stiffening are estab- lished. It is clearly elucidated for the first time that, dynamic stiffening is produced by the coupling effect of the centrifugal inertial load distributed on the beam and the transverse vibration deformation of the beam. The modeling approach in this paper successfully solves problems of popular modeling methods nowadays： the derivation process is too complex by using only one dynamic principle; a clearly theoretical mechanism for dynamic stiffening can＇ t be offered. First, the mass at non-tip po- sition is incorporated into the continuous dynamic equations of the system by use of the Dirac lunch tion and the Heaviside function. Then, based on the conclusions of orthogonalization about the nor- mal constrained modes, the finite dimensional state space equations suitable for controller design are obtained. The numerical simulation results show that： dynamic stiffening is included in the first-or- der model established in this paper, which indicates the dynamic responses of the rigid flexible cou- pling system with large overall motion accurately. The results also show that the mass has a soften- ing effect on the dynamic behavior of the flexible beam, and the effect would be more obvious when the mass has a larger mass, or lies closer to the tip of the beam.展开更多
Aiming at increasing the calculation efficiency of the pseudospectral methods, a multiple- interval Radau pseudospectral method （RPM） is presented to generate a reusable launch vehicle （RLV） ＇s optimal re-entry t...Aiming at increasing the calculation efficiency of the pseudospectral methods, a multiple- interval Radau pseudospectral method （RPM） is presented to generate a reusable launch vehicle （RLV） ＇s optimal re-entry trajectory. After dividing the optimal control problem into many intervals, the state and control variables are approximated using many fixed- and low-degree Lagrange polyno- mials in each interval. Convergence of the numerical discretization is then achieved by increasing the number of intervals. With the application of the proposed method, the normal nonlinear program- ming （NLP） problem transcribed from the optimal control problem can avoid being dense because of the low-degree approximation polynomials in each interval. Thus, the NLP solver can easily compute a solution. Finally, simulation results show that the optimized re-entry trajectories satisfy the path constraints and the boundary constraints successfully. Compared with the single interval RPM, the multiple-interval RPM is significantly faster and has higher calculation efficiency. The results indicate that the multiple-interval RPM can be applied for real-time trajectory generation due to its high effi- ciency and high precision.展开更多
文摘In order to satisfy the requirement of high precision measurement in a high dynamic environment, a kind of gyro aided multi-accelerometer inertial measurement unit （GAMA-IMU） with six accelerometers and two gyros （6A2G） was proposed in this paper. The available configurations have the problem of low measurement precision In a high dynamic environment due to channel coupling. The three channels were decoupled when calculating the angular velocity in the proposed configuration. The yawing and pitching angular velocity were directly measured by gyros, while only the rolling angular velocity was obtained by the GAMA-IMU indirectly from the rolling angular acceleration and quadratic component of rolling angular velocity. Then a single channel rolling angular velocity calculation model was established and the extended Kalman filter （EKF） was used to do state esti- mation. Simulations were carried out and results indicated that the calculation precision of the proposed 6A2G configuration could meet the demand of high precision measurement for a high-speed rotating carrier.
文摘A rigid flexible coupling physical model which can represent a flexible spacecraft is investigated in this paper. By applying the mechanics theory in a non-inertial coordinate system,the rigid flexible coupling dynamic model with dynamic stiffening is established via the subsystemmodeling framework. It is clearly elucidated for the first time that,dynamic stiffening is produced by the coupling effect of the centrifugal inertial load distributed on the beamand the transverse vibration deformation of the beam. The modeling approach in this paper successfully avoids problems which are caused by other popular modeling methods nowadays： the derivation process is too complex by using only one dynamic principle; a clearly theoretical explanation for dynamic stiffening can＇t be provided. First,the continuous dynamic models of the flexible beamand the central rigid body are established via structural dynamics and angular momentumtheory respectively. Then,based on the conclusions of orthogonalization about the normal constrained modes,the finite dimensional dynamic model suitable for controller design is obtained. The numerical simulation validations showthat： dynamic stiffening is successfully incorporated into the dynamic characteristics of the first-order model established in this paper,which can indicate the dynamic responses of the rigid flexible coupling system with large overall motion accurately,and has a clear modeling mechanism,concise expressions and a good convergence.
文摘The rigid flexible coupling system with a mass at non-tip position of the flexible beam is studied in this paper. Using the theory about mechanics problems in a non-inertial coordinate sys- tem, the dynamic equations of the rigid flexible coupling system with dynamic stiffening are estab- lished. It is clearly elucidated for the first time that, dynamic stiffening is produced by the coupling effect of the centrifugal inertial load distributed on the beam and the transverse vibration deformation of the beam. The modeling approach in this paper successfully solves problems of popular modeling methods nowadays： the derivation process is too complex by using only one dynamic principle; a clearly theoretical mechanism for dynamic stiffening can＇ t be offered. First, the mass at non-tip po- sition is incorporated into the continuous dynamic equations of the system by use of the Dirac lunch tion and the Heaviside function. Then, based on the conclusions of orthogonalization about the nor- mal constrained modes, the finite dimensional state space equations suitable for controller design are obtained. The numerical simulation results show that： dynamic stiffening is included in the first-or- der model established in this paper, which indicates the dynamic responses of the rigid flexible cou- pling system with large overall motion accurately. The results also show that the mass has a soften- ing effect on the dynamic behavior of the flexible beam, and the effect would be more obvious when the mass has a larger mass, or lies closer to the tip of the beam.
文摘Aiming at increasing the calculation efficiency of the pseudospectral methods, a multiple- interval Radau pseudospectral method （RPM） is presented to generate a reusable launch vehicle （RLV） ＇s optimal re-entry trajectory. After dividing the optimal control problem into many intervals, the state and control variables are approximated using many fixed- and low-degree Lagrange polyno- mials in each interval. Convergence of the numerical discretization is then achieved by increasing the number of intervals. With the application of the proposed method, the normal nonlinear program- ming （NLP） problem transcribed from the optimal control problem can avoid being dense because of the low-degree approximation polynomials in each interval. Thus, the NLP solver can easily compute a solution. Finally, simulation results show that the optimized re-entry trajectories satisfy the path constraints and the boundary constraints successfully. Compared with the single interval RPM, the multiple-interval RPM is significantly faster and has higher calculation efficiency. The results indicate that the multiple-interval RPM can be applied for real-time trajectory generation due to its high effi- ciency and high precision.
