The last few decades have witnessed an increasing emphasis on the development of strain-based ap- proach for predicting the creep life or damage of components operating at elevated temperatures. Creep ductility, as a ...The last few decades have witnessed an increasing emphasis on the development of strain-based ap- proach for predicting the creep life or damage of components operating at elevated temperatures. Creep ductility, as a key parameter in this approach, may vary with a number of factors including strain rate, state of stress, operating temperature, material microstructure, etc. The present paper, however, is focused on reviewing the state-of-the-art understanding of the effects of stress level and stress state on the creep ductility. Mechanisms involving the void growth and coalescence are presented to describe the role of stress level in the variation of uniaxial creep ductility. The prediction capacity of existing empirical duc- tility models is also assessed in light of uniaxial test data. On the other hand, a vast body of multiaxial creep test data, collected from open literature, is utilized to examine the influence of the state of stress on the creep ductility. Then, a variety of multiaxial ductility factor models are introduced and evaluated with the available experimental data. Finally, a brief discussion on the dependence of creep ductility on the stress triaxiality and Lode parameter, predicted by numerical methods, is provided.展开更多
As crucial parts of an aeroengine,blades are vulnerable to damage from long-term operation in harsh environments.The ultrasonic surface rolling process(USRP)is a novel surface treatment technique that can highly impro...As crucial parts of an aeroengine,blades are vulnerable to damage from long-term operation in harsh environments.The ultrasonic surface rolling process(USRP)is a novel surface treatment technique that can highly improve the mechanical behavior of blades.During secondary machining,the nominal blade model cannot be used for secondary machining path generation due to the deviation between the actual and nominal blades.The clamping error of the blade also affects the precision of secondary machining.This study presents a two-sided USRP(TS-USRP)machining for aeroengine blades on the basis of on-machine noncontact measurement.First,a TS-USRP machining system for blade is developed.Second,a 3D scanning system is used to obtain the point cloud of the blade,and a series of point cloud processing steps is performed.A local point cloud automatic extraction algorithm is introduced to extract the point cloud of the strengthened region of the blade.Then,the tool path is designed on the basis of the extracted point cloud.Finally,an experiment is conducted on an actual blade,with results showing that the proposed method is effective and efficient.展开更多
Materials in engineering applications are rarely uniaxially-loaded.In reality,failures under multiaxial loading has been widely observed in engineering structures.The life prediction of a component under multiaxial st...Materials in engineering applications are rarely uniaxially-loaded.In reality,failures under multiaxial loading has been widely observed in engineering structures.The life prediction of a component under multiaxial stresses has long been a challenging issue,particularly for high temperature applications.To distinguish the mode of failure ranging from a maximum principal stress intergranular damage to von Mises effective stress rupture mode a multiaxial stress rupture criterion(MSRC)was originally proposed by Sdobyrev and then Hayhurst and Leckie(SHL MSRC).A multiaxial-factor,α,was developed as a result which was intended to be a material constant and differentiates the bias of the MSRC between maxi-mum principal stress and effective stress.The success of the SHL MSRC relies on accurately calibrating the value ofαto quantify the multiaxial response of the material/geometry combination.To find a more suitable approach for determining MSRC,the applicability of different methods are evaluated.Given that the resulting analysis of the various approaches can be affected by the creep failure mechanism,princi-ples in the determination of MSRC with and without using continuum damage mechanics approaches are recommended.The viability of uniaxial material parameters in correlating withαthrough the analysis of available data in literature is also presented.It is found that the increase of the uniaxial creep dam-age tolerance parameterλis accompanied bythe decreaseof theα-value,whichimplies thatthe creep ductility plays an important role in affecting the multiaxial rupture behavior of materials.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 11472105 and 51505149)the "111 project"The first author wishes to thank the financial support provided by Shanghai Sailing Program (Grant No. 15YF1402900)
文摘The last few decades have witnessed an increasing emphasis on the development of strain-based ap- proach for predicting the creep life or damage of components operating at elevated temperatures. Creep ductility, as a key parameter in this approach, may vary with a number of factors including strain rate, state of stress, operating temperature, material microstructure, etc. The present paper, however, is focused on reviewing the state-of-the-art understanding of the effects of stress level and stress state on the creep ductility. Mechanisms involving the void growth and coalescence are presented to describe the role of stress level in the variation of uniaxial creep ductility. The prediction capacity of existing empirical duc- tility models is also assessed in light of uniaxial test data. On the other hand, a vast body of multiaxial creep test data, collected from open literature, is utilized to examine the influence of the state of stress on the creep ductility. Then, a variety of multiaxial ductility factor models are introduced and evaluated with the available experimental data. Finally, a brief discussion on the dependence of creep ductility on the stress triaxiality and Lode parameter, predicted by numerical methods, is provided.
基金The authors gratefully acknowledge the financial support extended by the National Natural Science Foundation of China(Grant Nos.51975214,51725503,and 51575183)the 111 Project.Zhang X C is also grateful for the support by the Major Program of the National Natural Science Foundation of Shanghai(Grant No.2019-01-07-00-02-E00068).
文摘As crucial parts of an aeroengine,blades are vulnerable to damage from long-term operation in harsh environments.The ultrasonic surface rolling process(USRP)is a novel surface treatment technique that can highly improve the mechanical behavior of blades.During secondary machining,the nominal blade model cannot be used for secondary machining path generation due to the deviation between the actual and nominal blades.The clamping error of the blade also affects the precision of secondary machining.This study presents a two-sided USRP(TS-USRP)machining for aeroengine blades on the basis of on-machine noncontact measurement.First,a TS-USRP machining system for blade is developed.Second,a 3D scanning system is used to obtain the point cloud of the blade,and a series of point cloud processing steps is performed.A local point cloud automatic extraction algorithm is introduced to extract the point cloud of the strengthened region of the blade.Then,the tool path is designed on the basis of the extracted point cloud.Finally,an experiment is conducted on an actual blade,with results showing that the proposed method is effective and efficient.
基金This work was financially supported by Projects of the National Natural Science Foundation of China(Nos.521130511,11502082,52075174)the Higher Education Discipline Innovation Project("111 Project")(No.B13020).Helpful discussions with Jian-Feng Wen and Guo-Zhen Wang at the East China University of Science and Technology and Qiang Xu at the University of Huddersfield are gratefully acknowledged.
文摘Materials in engineering applications are rarely uniaxially-loaded.In reality,failures under multiaxial loading has been widely observed in engineering structures.The life prediction of a component under multiaxial stresses has long been a challenging issue,particularly for high temperature applications.To distinguish the mode of failure ranging from a maximum principal stress intergranular damage to von Mises effective stress rupture mode a multiaxial stress rupture criterion(MSRC)was originally proposed by Sdobyrev and then Hayhurst and Leckie(SHL MSRC).A multiaxial-factor,α,was developed as a result which was intended to be a material constant and differentiates the bias of the MSRC between maxi-mum principal stress and effective stress.The success of the SHL MSRC relies on accurately calibrating the value ofαto quantify the multiaxial response of the material/geometry combination.To find a more suitable approach for determining MSRC,the applicability of different methods are evaluated.Given that the resulting analysis of the various approaches can be affected by the creep failure mechanism,princi-ples in the determination of MSRC with and without using continuum damage mechanics approaches are recommended.The viability of uniaxial material parameters in correlating withαthrough the analysis of available data in literature is also presented.It is found that the increase of the uniaxial creep dam-age tolerance parameterλis accompanied bythe decreaseof theα-value,whichimplies thatthe creep ductility plays an important role in affecting the multiaxial rupture behavior of materials.
