Solder balls, which are used in advanced electronics packages such as BGA (Ball Grid Array) and CSP (Chip Scale Package) to substitute the leads and realize the electrical and mechanical connections between substrate ...Solder balls, which are used in advanced electronics packages such as BGA (Ball Grid Array) and CSP (Chip Scale Package) to substitute the leads and realize the electrical and mechanical connections between substrate and chip,have severe specifications in diameter tolerance, roundness and surface quality, and therefore challenge the traditional technologies for fabrication of metallic particles and powders. The present work made a survey of perturbed molten metal jet break-up process, observed the formation and growth of capillary wave of tin-lead melt jet by way of rapid solidification, and on the basis of the above research, successfully obtained tin-lead eutectic and Sn-4.0Ag-0.5Cu lead free solder balls with tight distribution and good sphericity of particles through optimization of processing parameters, forming a solid base for cost effectively producing solder balls.展开更多
To obtain semi-solid Al alloy billet with high quality, an investigation was carried out by imposing a multiple magnetic field from the outside of a copper mold in the continuous casting. AISi6Mg2 alloy designed for s...To obtain semi-solid Al alloy billet with high quality, an investigation was carried out by imposing a multiple magnetic field from the outside of a copper mold in the continuous casting. AISi6Mg2 alloy designed for semi-solid metal （SSM） processing was continuously cast through a submerged entry nozzle under various conditions. Effects of multiple magnetic field on meniscus motion, temperature distribution and billet quality were examined. The experimental results showed that meniscus disturbance caused by electromagnetic stirring could be controlled effectively and the surface quality of semi-solid AI alloy billet was improved greatly, and an uniformly fine, globular microstructure across the transverse section of the billet was achieved by optimizing the distribution of multiple magnetic field.展开更多
The effects of slurry temperature, injection pressure, and piston velocity on the rheo-filling ability of semisolid A356 alloys were studied by the reho-diecasting methods. The results show that the slurry temperature...The effects of slurry temperature, injection pressure, and piston velocity on the rheo-filling ability of semisolid A356 alloys were studied by the reho-diecasting methods. The results show that the slurry temperature of the semi-solid A356 aluminum alloy has an important effect on the filling ability; the higher the slurry temperature, the better is the filling ability, and the appropriate slurry temperature for rheo-filling is in the range of 585-595℃. The injection pressure also has a great effect on the filling ability, and it is appropriate to the rheo-filling when the injection pressure is in the range of 15-25 MPa. The piston velocity also has a great effect on the filling ability, and it is appropriate to the rheo-filling when the piston velocity is in the range of 0.072-0.12 m/s. The filling ability of the slurry prepared by low superheat pouring with weak electromagnetic stirring is very good and the microstructural distribution in the rheo-formed die castings is homogeneous, which is advantageous to the high quality die casting. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
文摘Solder balls, which are used in advanced electronics packages such as BGA (Ball Grid Array) and CSP (Chip Scale Package) to substitute the leads and realize the electrical and mechanical connections between substrate and chip,have severe specifications in diameter tolerance, roundness and surface quality, and therefore challenge the traditional technologies for fabrication of metallic particles and powders. The present work made a survey of perturbed molten metal jet break-up process, observed the formation and growth of capillary wave of tin-lead melt jet by way of rapid solidification, and on the basis of the above research, successfully obtained tin-lead eutectic and Sn-4.0Ag-0.5Cu lead free solder balls with tight distribution and good sphericity of particles through optimization of processing parameters, forming a solid base for cost effectively producing solder balls.
文摘To obtain semi-solid Al alloy billet with high quality, an investigation was carried out by imposing a multiple magnetic field from the outside of a copper mold in the continuous casting. AISi6Mg2 alloy designed for semi-solid metal （SSM） processing was continuously cast through a submerged entry nozzle under various conditions. Effects of multiple magnetic field on meniscus motion, temperature distribution and billet quality were examined. The experimental results showed that meniscus disturbance caused by electromagnetic stirring could be controlled effectively and the surface quality of semi-solid AI alloy billet was improved greatly, and an uniformly fine, globular microstructure across the transverse section of the billet was achieved by optimizing the distribution of multiple magnetic field.
基金the National Nature Science Foundation of China(No.50774007)the National High Technology Research and Development Program of China(No.2006AA03Z115)the National Key Basic Research Program of China(No.2006CB605203).
文摘The effects of slurry temperature, injection pressure, and piston velocity on the rheo-filling ability of semisolid A356 alloys were studied by the reho-diecasting methods. The results show that the slurry temperature of the semi-solid A356 aluminum alloy has an important effect on the filling ability; the higher the slurry temperature, the better is the filling ability, and the appropriate slurry temperature for rheo-filling is in the range of 585-595℃. The injection pressure also has a great effect on the filling ability, and it is appropriate to the rheo-filling when the injection pressure is in the range of 15-25 MPa. The piston velocity also has a great effect on the filling ability, and it is appropriate to the rheo-filling when the piston velocity is in the range of 0.072-0.12 m/s. The filling ability of the slurry prepared by low superheat pouring with weak electromagnetic stirring is very good and the microstructural distribution in the rheo-formed die castings is homogeneous, which is advantageous to the high quality die casting. 2008 University of Science and Technology Beijing. All rights reserved.
