There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,a...There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.展开更多
As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands...As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands as a landmark in this setting,by promising the precise integration of biomaterials,cells,and bioactive molecules,thus opening up a novel avenue for tissue/organ regeneration.Curated by the editorial board of Bio-Design and Manufacturing,this review brings together a cohort of leading young scientists in China to dissect the core functionalities and evolutionary trajectory of 3D bioprinting,by elucidating the intricate challenges encountered in the manufacturing of transplantable organs.We further delve into the translational pathway from scientific research to clinical application,emphasizing the imperativeness of establishing a regulatory framework and rigorously enforcing quality-control measures.Finally,this review outlines the strategic landscape and innovative achievements of China in this field and provides a comprehensive roadmap for researchers worldwide to propel this field collectively to even greater heights.展开更多
Objective:Drug-loaded mucoadhesive silk fibroin(SF)microneedle patch can overcome the limitations of low bioavailability and significant pain associated with traditional treatment methods,such as topical application o...Objective:Drug-loaded mucoadhesive silk fibroin(SF)microneedle patch can overcome the limitations of low bioavailability and significant pain associated with traditional treatment methods,such as topical application or injection of triamcinolone for oral submucous fibrosis(OSF).However,these systems release the drug too quickly,failing to meet the clinical requirements.This study aims to construct a mucoadhesive SF microneedle patch pre-assembled with silk fibroin nanospheres(SFN)and explore its ability to sustain the release of triamcinolone in the treatment of OSF.Methods:SFN was pre-assembled via precipitation reaction and characterized by scanning electron microscope(SEM)for the morphology.The particle size andζ-potential were measured by dynamic light scattering(DLS).Triamcinolone was loaded onto SFN using a diffusional post-loading method.The effective loading of triamcinolone was confirmed using Fourier-transform infrared spectroscopy(FTIR).The concentration of unloaded triamcinolone was quantified by high-performance liquid chromatography.Drug encapsulation efficiency and loading capacity of SFN were then calculated to determine the optimal amount of drug loading.The SFN suspension was pre-mixed with SF solution to prepare the microneedle under-layer.The microneedle morphology was observed by SEM.Compression mechanical tests were performed to evaluate the fracture force of microneedles at different nanosphere contents(5%,10%,and 20%),determining the optimal pre-mixing ratio.Ex-vivo mouse oral mucosa permeation studies were performed to ascertain the insertion depth of the microneedles via histological sections.The adhesive top layer was synthesized using SF and tannic acid,with FTIR confirming its successful synthesis.Its viscoelasticity was characterized by a rheometer,and differential scanning calorimetry analyzed thermal properties.Tensile tests evaluated the interfacial bonding strength between the adhesive layer and microneedle base to ensure no detachment during use.Adhesion to wet oral mucosal tissues was tested and compared to commercial oral patches.Under the optimized conditions,the double-layered mucoadhesive microneedle patch with pre-assembled nanospheres was prepared.Its cell compatibility was evaluated by cell counting kit-8(CCK-8),live/dead staining,and phalloidin staining after co culturing with fibroblasts.The drug release experiment was conducted to demonstrate its sustained release efficacy.Results:SFN(mean diameter 46.25 nm)was successfully prepared.The maximum drug encapsulation efficiency was(63.88±1.09)%(corresponding loading capacity of SFN was(27.41±3.06)%when the weight ratio of triamcinolone/SFN was 0.5.The corporation of SFN did not affect microneedle morphology.The mechanical properties of microneedles decreased with increasing nanosphere amount.Only the fracture force of the group with 5%SFN[(0.07±0.01)N/needle]exceeded the minimum force required for mucosal penetration,thus selected as the optimal pre-mixing ratio.Histological sections confirmed that the SFN microneedles could penetrate the epithelial layer and deliver drugs to OSF affected areas.Adhesion strength between the microneedle base and top layer was(94.8±6.89)kPa,confirming strong bonding with no detachment during use.The wet adhesive strength of the double-layered mucoadhesive microneedle patch[(41.28±7.43)kPa]was significantly enhanced compared to commercial oral patches(4.5 kPa,P<0.01).CCK-8 and live/dead staining results confirmed no significant cytotoxicity.Drug release experiment showed the double-layered mucoadhesive microneedle patch with pre-assembled SFN enabled sustained release time of triamcinolone from 4 days to 14 days.Conclusion:Pre-assembling nanospheres in mucoadhesive SF microneedle patches can extend triamcinolone release time,meeting clinical requirements for sustained drug delivery.展开更多
High speed sintering,a new powder-bed fusion additive manufacturing technology,utilizes infrared lights(IR)to intensely heat and melt polymer powders.The presence of defects such as porosity,which is associated with p...High speed sintering,a new powder-bed fusion additive manufacturing technology,utilizes infrared lights(IR)to intensely heat and melt polymer powders.The presence of defects such as porosity,which is associated with particle coalescence,is highly dependdent on the level of energy input.This study investigate the influcence of energy input on porosity and its subsequent effects on the mechanical properties and microstructures of PEBA parts.The parts were manufactured with a variety of lamp powers,resulting in a range of energy input levels spanning from low to high.Subsequebtly,they underwent testing using Archimedes’method,followed by tensile testing.The porosity,mechanical characteristics,and energy input exhibit a strong correlation;inadequate energy input was the primary cause of pore formation.Using the reduced IR light power resulted in the following outcomes:porosity,ultimate tensile strength,and elongation of 1.37%,7.6 MPa,and 194.2%,respectively.When the energy input was further increased,the porosity was reduced to as low as 0.05%and the ultimate tensile strength and elongation were increased to their peak values of 233.8%and 9.1 MPa,respectively.展开更多
基金supported by the National Key Research and Development Program of China(No.2022YFB4602600)the National Natural Science Foundation of China(No.52221001)Hunan Provincial Innovation Foundation for Postgraduate(No.CX20220406)。
文摘There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.
基金supported by the National Natural Science Foundation of China(Nos.52325504,52235007,and T2121004).
文摘As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands as a landmark in this setting,by promising the precise integration of biomaterials,cells,and bioactive molecules,thus opening up a novel avenue for tissue/organ regeneration.Curated by the editorial board of Bio-Design and Manufacturing,this review brings together a cohort of leading young scientists in China to dissect the core functionalities and evolutionary trajectory of 3D bioprinting,by elucidating the intricate challenges encountered in the manufacturing of transplantable organs.We further delve into the translational pathway from scientific research to clinical application,emphasizing the imperativeness of establishing a regulatory framework and rigorously enforcing quality-control measures.Finally,this review outlines the strategic landscape and innovative achievements of China in this field and provides a comprehensive roadmap for researchers worldwide to propel this field collectively to even greater heights.
基金supported by the National Key Research and Development Program(2022YFC2402900)the Key Research and Development Program of Hainan Province(ZDYF2024SHFZ128)the Science and Technology Innovation Program of Hunan Province(2022RC1213),China.
文摘Objective:Drug-loaded mucoadhesive silk fibroin(SF)microneedle patch can overcome the limitations of low bioavailability and significant pain associated with traditional treatment methods,such as topical application or injection of triamcinolone for oral submucous fibrosis(OSF).However,these systems release the drug too quickly,failing to meet the clinical requirements.This study aims to construct a mucoadhesive SF microneedle patch pre-assembled with silk fibroin nanospheres(SFN)and explore its ability to sustain the release of triamcinolone in the treatment of OSF.Methods:SFN was pre-assembled via precipitation reaction and characterized by scanning electron microscope(SEM)for the morphology.The particle size andζ-potential were measured by dynamic light scattering(DLS).Triamcinolone was loaded onto SFN using a diffusional post-loading method.The effective loading of triamcinolone was confirmed using Fourier-transform infrared spectroscopy(FTIR).The concentration of unloaded triamcinolone was quantified by high-performance liquid chromatography.Drug encapsulation efficiency and loading capacity of SFN were then calculated to determine the optimal amount of drug loading.The SFN suspension was pre-mixed with SF solution to prepare the microneedle under-layer.The microneedle morphology was observed by SEM.Compression mechanical tests were performed to evaluate the fracture force of microneedles at different nanosphere contents(5%,10%,and 20%),determining the optimal pre-mixing ratio.Ex-vivo mouse oral mucosa permeation studies were performed to ascertain the insertion depth of the microneedles via histological sections.The adhesive top layer was synthesized using SF and tannic acid,with FTIR confirming its successful synthesis.Its viscoelasticity was characterized by a rheometer,and differential scanning calorimetry analyzed thermal properties.Tensile tests evaluated the interfacial bonding strength between the adhesive layer and microneedle base to ensure no detachment during use.Adhesion to wet oral mucosal tissues was tested and compared to commercial oral patches.Under the optimized conditions,the double-layered mucoadhesive microneedle patch with pre-assembled nanospheres was prepared.Its cell compatibility was evaluated by cell counting kit-8(CCK-8),live/dead staining,and phalloidin staining after co culturing with fibroblasts.The drug release experiment was conducted to demonstrate its sustained release efficacy.Results:SFN(mean diameter 46.25 nm)was successfully prepared.The maximum drug encapsulation efficiency was(63.88±1.09)%(corresponding loading capacity of SFN was(27.41±3.06)%when the weight ratio of triamcinolone/SFN was 0.5.The corporation of SFN did not affect microneedle morphology.The mechanical properties of microneedles decreased with increasing nanosphere amount.Only the fracture force of the group with 5%SFN[(0.07±0.01)N/needle]exceeded the minimum force required for mucosal penetration,thus selected as the optimal pre-mixing ratio.Histological sections confirmed that the SFN microneedles could penetrate the epithelial layer and deliver drugs to OSF affected areas.Adhesion strength between the microneedle base and top layer was(94.8±6.89)kPa,confirming strong bonding with no detachment during use.The wet adhesive strength of the double-layered mucoadhesive microneedle patch[(41.28±7.43)kPa]was significantly enhanced compared to commercial oral patches(4.5 kPa,P<0.01).CCK-8 and live/dead staining results confirmed no significant cytotoxicity.Drug release experiment showed the double-layered mucoadhesive microneedle patch with pre-assembled SFN enabled sustained release time of triamcinolone from 4 days to 14 days.Conclusion:Pre-assembling nanospheres in mucoadhesive SF microneedle patches can extend triamcinolone release time,meeting clinical requirements for sustained drug delivery.
基金This work was financially supported by the National Natural Science Foundation of China(No.52275333).
文摘High speed sintering,a new powder-bed fusion additive manufacturing technology,utilizes infrared lights(IR)to intensely heat and melt polymer powders.The presence of defects such as porosity,which is associated with particle coalescence,is highly dependdent on the level of energy input.This study investigate the influcence of energy input on porosity and its subsequent effects on the mechanical properties and microstructures of PEBA parts.The parts were manufactured with a variety of lamp powers,resulting in a range of energy input levels spanning from low to high.Subsequebtly,they underwent testing using Archimedes’method,followed by tensile testing.The porosity,mechanical characteristics,and energy input exhibit a strong correlation;inadequate energy input was the primary cause of pore formation.Using the reduced IR light power resulted in the following outcomes:porosity,ultimate tensile strength,and elongation of 1.37%,7.6 MPa,and 194.2%,respectively.When the energy input was further increased,the porosity was reduced to as low as 0.05%and the ultimate tensile strength and elongation were increased to their peak values of 233.8%and 9.1 MPa,respectively.
