The purpose of this study is to analyze the galloping characteristics of the catenary positive feeder in fluctuating wind areas considering dynamic-wind angle of attack and aerodynamic damping.Firstly,the flow field m...The purpose of this study is to analyze the galloping characteristics of the catenary positive feeder in fluctuating wind areas considering dynamic-wind angle of attack and aerodynamic damping.Firstly,the flow field model of the catenary positive feeder was established,the fluctuating wind field was simulated by Davenport wind power spectrum and linear filtering method,and the wind speed at inlet in calculation domain was controlled by editing the profile file to simulate and calculate the aerodynamic characteristics of the positive feeder in the fluctuating wind area.Then,taking the positive feeder as the research object,the mathematical model of actual structure and the corresponding finite element model were established.By applying the wind load to the finite element model,the influence of aerodynamic damping caused by the self-movement of the positive feeder on the galloping response was analyzed,and the frequency domain characteristics of galloping displacement of the positive feeder considering aerodynamic damping were studied.Finally,the calculation method of aerodynamic damping by the Guidelines for Electrical Transmission Line Structural Loading(ASCE No.74)was used for the galloping response of the positive feeder and compared with the proposed method.The results show that when considering aerodynamic damping,the galloping amplitude of the positive feeder decreases significantly,and the first-order resonance effect on the vertical displacement and horizontal displacement decreases significantly.The galloping trajectories calculated by the two methods are consistent.Therefore,this study is of great significance to further clarify the ice-free galloping mechanism of the catenary positive feeder in violent wind areas.展开更多
This paper presents a kind of modeling approach to the study of the thermal-hydraulic piston pump which is used in the airplane comprehensively. A set of lumped parameter mathematical models are developed which are ba...This paper presents a kind of modeling approach to the study of the thermal-hydraulic piston pump which is used in the airplane comprehensively. A set of lumped parameter mathematical models are developed which are based on conservation of energy. Heat transfer analysis for the piston pump is also given in the paper in which the heat flow inside the piston pump is described precisely. The theoretical basis and modeling stratagy are applied in a typical thermal-hydraulic circuit containing the piston pump. Simulation results are presented which show a comparison of model/rig performance and the agreement obtained demonstrates the validity of the modeling approach.展开更多
To increase spatial resolution and signal-to-noise ratio in PET imaging,we present in this paper the design and performance evaluation of a PET detector module combining both depth-of-interaction(DOI) and time-offligh...To increase spatial resolution and signal-to-noise ratio in PET imaging,we present in this paper the design and performance evaluation of a PET detector module combining both depth-of-interaction(DOI) and time-offlight(TOF) capabilities.The detector module consists of a staggered dual-layer LYSO block with2 mm × 2 mm × 7 mm crystals.MR-compatible SiPM sensors(MicroFJ-30035-TSV,SensL) are assembled into an 8× 8 array.SiPM signals from both fast and slow outputs are read out by a 128-channel ASIC chip.To test its performance,a flood histogram is acquired with a ^(22)Na point source on top of the detector,and the energy resolution and the coincidence resolving time(CRT) value for each individual crystal are measured.The flood histogram shows excellent crystal separation in both layers.The average energy resolution at 511 keV is 14.0 and 12.7%at the bottom and top layers,respectively.The average CRT of a single crystal is 635 and 565 ps at the bottom and top layers,respectively.In conclusion,the compact DOI-TOF PET detector module is of excellent crystal identification capability,good energy resolution and reasonable time resolution and has promising application prospective in clinical TOF PET,PET/MRI,and brain PET systems.展开更多
Multi-disciplinary virtual prototypes of complex products are increasingly and widely used in modern advanced manufactur- ing. How to effectively address the problems of unified modeling, composition and reuse based o...Multi-disciplinary virtual prototypes of complex products are increasingly and widely used in modern advanced manufactur- ing. How to effectively address the problems of unified modeling, composition and reuse based on the multi-disciplinary heteroge- neous models has brought great challenges to the modeling and simulation （M＆S） science and technology. This paper presents a top-level modeling theory based on the meta modeling framework （M2F） of the COllaborative SIMulation （COSlM） theory of virtual prototyping to solve the problems. Firstly the fundamental prin- ciples of the top-level modeling theory are decribed to expound the premise, assumptions, basic conventions and special require- ments in the description of complex heterogeneous systems. Next the formalized definitions for each factor in top level modeling are proposed and the hierarchical nature of them is illustrated. After demonstrating that they are self-closing, this paper divides the top- level modeling into two views, static structural graph and dynamic behavioral graph. Finally, a case study is discussed to demon- strate the feasibility of the theory.展开更多
The integrated electro-hydrostatic actuator （EHA） with variable displacement and variable rotation speed is researched. In the system, the output of the actuator is changed by controlling the rotationspeed of the br...The integrated electro-hydrostatic actuator （EHA） with variable displacement and variable rotation speed is researched. In the system, the output of the actuator is changed by controlling the rotationspeed of the brushless DC servomotor and the displacement of the servopump. The mathematical model described in state-space model is created. The system characteristics are studied based on the point of multiplicative dual-variable. And the basic method of control of the system is presented.展开更多
Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure ...Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure could be reduced by decreasing the ratio of length to diameter of nozzle. The friction between high speed air and pipe wall would be reduced if the nozzle is designed to be converging shape comparing with straight shape. But the volume flow and pressure, discussed in these studies, do not describe energy loss of the blowing system directly. Pneumatic power is an innovative principle to estimate pneumatic system’s energy consumption directly. Based on the above principle, a pulse blowing method is put forward for saving energy. A flow experiment is carried out, in which the high speed air flows from the pulse blowing system and continuous blowing system respectively to a plate with grease on top. Supply pressure and the volume of air used for removing the grease are measured to calculate energy consumption. From the experiment result, the pulse blowing system performs to conserve energy comparing with the continuous blowing system. The frequency and duty ratio of pulse flow influence the blowing characteristic. The pulse blowing system performs to be the most efficient at the specified frequency and duty ratio. Then a pneumatic self-oscillated method based on air operated valve is put forward to generate pulse flow. A simulation is made about dynamic modeling the air operated valve and calculating the motion of the valve core and output pressure. The simulation result verifies the system to be able to generate pulse flow, and predicts the key parameters of the frequency and duty ratio measured by experiment well. Finally, on the basis of simplifying and solution of the pulse blowing system’s mathematic model, the relationship between system’s frequency duty ratio and the dimensions of components is simply described with four algebraic equations. The system could be designed with specified frequency and duty ratio according to the four equations. This study provides theoretical basis for designing energy-saving air blowing system.展开更多
基金supported by National Natural Science Foundation of China (No.51867013)Natural Science Foundation of Gansu Province (No.20JR5RA414)。
文摘The purpose of this study is to analyze the galloping characteristics of the catenary positive feeder in fluctuating wind areas considering dynamic-wind angle of attack and aerodynamic damping.Firstly,the flow field model of the catenary positive feeder was established,the fluctuating wind field was simulated by Davenport wind power spectrum and linear filtering method,and the wind speed at inlet in calculation domain was controlled by editing the profile file to simulate and calculate the aerodynamic characteristics of the positive feeder in the fluctuating wind area.Then,taking the positive feeder as the research object,the mathematical model of actual structure and the corresponding finite element model were established.By applying the wind load to the finite element model,the influence of aerodynamic damping caused by the self-movement of the positive feeder on the galloping response was analyzed,and the frequency domain characteristics of galloping displacement of the positive feeder considering aerodynamic damping were studied.Finally,the calculation method of aerodynamic damping by the Guidelines for Electrical Transmission Line Structural Loading(ASCE No.74)was used for the galloping response of the positive feeder and compared with the proposed method.The results show that when considering aerodynamic damping,the galloping amplitude of the positive feeder decreases significantly,and the first-order resonance effect on the vertical displacement and horizontal displacement decreases significantly.The galloping trajectories calculated by the two methods are consistent.Therefore,this study is of great significance to further clarify the ice-free galloping mechanism of the catenary positive feeder in violent wind areas.
文摘This paper presents a kind of modeling approach to the study of the thermal-hydraulic piston pump which is used in the airplane comprehensively. A set of lumped parameter mathematical models are developed which are based on conservation of energy. Heat transfer analysis for the piston pump is also given in the paper in which the heat flow inside the piston pump is described precisely. The theoretical basis and modeling stratagy are applied in a typical thermal-hydraulic circuit containing the piston pump. Simulation results are presented which show a comparison of model/rig performance and the agreement obtained demonstrates the validity of the modeling approach.
基金supported in part by Fundamental Research Funds for the Central Universities(No.FRF-TP-15-114A1)National Natural Science Foundation of China(Nos.11375096,11505300)Tsinghua University Initiative Scientific Research Program(No.20131089289)
文摘To increase spatial resolution and signal-to-noise ratio in PET imaging,we present in this paper the design and performance evaluation of a PET detector module combining both depth-of-interaction(DOI) and time-offlight(TOF) capabilities.The detector module consists of a staggered dual-layer LYSO block with2 mm × 2 mm × 7 mm crystals.MR-compatible SiPM sensors(MicroFJ-30035-TSV,SensL) are assembled into an 8× 8 array.SiPM signals from both fast and slow outputs are read out by a 128-channel ASIC chip.To test its performance,a flood histogram is acquired with a ^(22)Na point source on top of the detector,and the energy resolution and the coincidence resolving time(CRT) value for each individual crystal are measured.The flood histogram shows excellent crystal separation in both layers.The average energy resolution at 511 keV is 14.0 and 12.7%at the bottom and top layers,respectively.The average CRT of a single crystal is 635 and 565 ps at the bottom and top layers,respectively.In conclusion,the compact DOI-TOF PET detector module is of excellent crystal identification capability,good energy resolution and reasonable time resolution and has promising application prospective in clinical TOF PET,PET/MRI,and brain PET systems.
基金supported by the National High Technology Research and Development Program (863 Program) (2011AA040502).
文摘Multi-disciplinary virtual prototypes of complex products are increasingly and widely used in modern advanced manufactur- ing. How to effectively address the problems of unified modeling, composition and reuse based on the multi-disciplinary heteroge- neous models has brought great challenges to the modeling and simulation （M＆S） science and technology. This paper presents a top-level modeling theory based on the meta modeling framework （M2F） of the COllaborative SIMulation （COSlM） theory of virtual prototyping to solve the problems. Firstly the fundamental prin- ciples of the top-level modeling theory are decribed to expound the premise, assumptions, basic conventions and special require- ments in the description of complex heterogeneous systems. Next the formalized definitions for each factor in top level modeling are proposed and the hierarchical nature of them is illustrated. After demonstrating that they are self-closing, this paper divides the top- level modeling into two views, static structural graph and dynamic behavioral graph. Finally, a case study is discussed to demon- strate the feasibility of the theory.
基金Supported by Gansu Province Natural Science Foundation（3ZS061-A25-045）, and the“Qing Lan”Talent Engineering Funds of Lanazhou Jiaotong University（QL-06-19A）
文摘The integrated electro-hydrostatic actuator （EHA） with variable displacement and variable rotation speed is researched. In the system, the output of the actuator is changed by controlling the rotationspeed of the brushless DC servomotor and the displacement of the servopump. The mathematical model described in state-space model is created. The system characteristics are studied based on the point of multiplicative dual-variable. And the basic method of control of the system is presented.
文摘Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure could be reduced by decreasing the ratio of length to diameter of nozzle. The friction between high speed air and pipe wall would be reduced if the nozzle is designed to be converging shape comparing with straight shape. But the volume flow and pressure, discussed in these studies, do not describe energy loss of the blowing system directly. Pneumatic power is an innovative principle to estimate pneumatic system’s energy consumption directly. Based on the above principle, a pulse blowing method is put forward for saving energy. A flow experiment is carried out, in which the high speed air flows from the pulse blowing system and continuous blowing system respectively to a plate with grease on top. Supply pressure and the volume of air used for removing the grease are measured to calculate energy consumption. From the experiment result, the pulse blowing system performs to conserve energy comparing with the continuous blowing system. The frequency and duty ratio of pulse flow influence the blowing characteristic. The pulse blowing system performs to be the most efficient at the specified frequency and duty ratio. Then a pneumatic self-oscillated method based on air operated valve is put forward to generate pulse flow. A simulation is made about dynamic modeling the air operated valve and calculating the motion of the valve core and output pressure. The simulation result verifies the system to be able to generate pulse flow, and predicts the key parameters of the frequency and duty ratio measured by experiment well. Finally, on the basis of simplifying and solution of the pulse blowing system’s mathematic model, the relationship between system’s frequency duty ratio and the dimensions of components is simply described with four algebraic equations. The system could be designed with specified frequency and duty ratio according to the four equations. This study provides theoretical basis for designing energy-saving air blowing system.
