Solid-state electrolyte Li_(10)GeP_(2)S_(12)(LGPS)has a high lithium ion conductivity of 12 mS cm^(-1)at room temperature,but its inferior chemical stability against lithium metal anode impedes its practical applicati...Solid-state electrolyte Li_(10)GeP_(2)S_(12)(LGPS)has a high lithium ion conductivity of 12 mS cm^(-1)at room temperature,but its inferior chemical stability against lithium metal anode impedes its practical application.Among all solutions,Ge atom substitution of the solid-state electrolyte LGPS stands out as the most promising solution to this interface problem.A systematic screening framework for Ge atom substitution including ionic conductivity,thermodynamic stability,electronic and mechanical properties is utilized to solve it.For fast screening,an enhanced model Dop Net FC using chemical formulas for the dataset is adopted to predict ionic conductivity.Finally,Li_(10)SrP_(2)S_(12)(LSrPS)is screened out,which has high lithium ion conductivity(12.58 mS cm^(-1)).In addition,an enhanced migration of lithium ion across the LSr PS/Li interface is found.Meanwhile,compared to the LGPS/Li interface,LSrPS/Li interface exhibits a larger Schottky barrier(0.134 eV),smaller electron transfer region(3.103?),and enhanced ability to block additional electrons,all of which contribute to the stabilized interface.The applied theoretical atom substitution screening framework with the aid of machine learning can be extended to rapid determination of modified specific material schemes.展开更多
The previous work found that the additive kaolin could scavenge not only sodium(Na)but also calcium(Ca)and magnesium(Mg),which is the important ash fluxing agents in low rank coal combustion.Such scavenging effects of...The previous work found that the additive kaolin could scavenge not only sodium(Na)but also calcium(Ca)and magnesium(Mg),which is the important ash fluxing agents in low rank coal combustion.Such scavenging effects of kaolin on fine ash formation were studied in the present work.A typical Zhundong coal and its blends with kaolin at dosages of 1,2 and 4 wt%were combusted in an electrically heated drop tube furnace(DTF)at 1300℃.The fine ashes generated were collected and size segregated by a low pressure impactor(LPI).The morphology and chemical composition of fine ash were analyzed by scanning electron microscopy equipped with an energydispersive spectrometer(SEM-EDS).In addition,char/ash particles were sampled at various positions of DTF to elucidate how kaolin additive affected the fine ash formation process.The results further showed that apart from the scavenging of volatile Na,kaolin additive could also strongly scavenge the refractory Ca,Mg and Fe in the fine ash during Zhundong coal combustion,which transformed the sintered particles with irregular shape into melted spherical particles,and finally resulted in the considerable decrease of these elements in both PM_(0.4)and PM_(0.4-10)by melting and agglomeration.The close contacts between kaolin particles and coal resulted from physically mixing were a key factor responsible for the reaction of kaolin with the refractory Ca,Mg and Fe.展开更多
This paper reports an investigation of Computational Fluid Dynamics(CFD)on the influence of injection momentum rate of premixed air and fuel on the flameless Moderate or Intense Low oxygen Dilution(MILD) combustion in...This paper reports an investigation of Computational Fluid Dynamics(CFD)on the influence of injection momentum rate of premixed air and fuel on the flameless Moderate or Intense Low oxygen Dilution(MILD) combustion in a recuperative furnace.Details of the furnace flow velocity,temperature,O2,CO2 and NOx concentrations are provided.Results obtained suggest that the flue gas recirculation plays a vital role in establishing the premixed MILD combustion.It is also revealed that there is a critical momentum rate of the fuel-air mixture below which MILD combustion does not occur.Moreover,the momentum rate appears to have less significant influence on conventional global combustion than on MILD combustion.展开更多
Oxyfuel combustion with carbon capture and sequestration （CCS） is a carbon-reduction technology for use in large-scale coal-fired power plants. Significant progress has been achieved in the research and development ...Oxyfuel combustion with carbon capture and sequestration （CCS） is a carbon-reduction technology for use in large-scale coal-fired power plants. Significant progress has been achieved in the research and development of this technology during its scaling up from 0.4 MWth to 3 MWth and 35 aWth by the combined efforts of universities and industries in China. A prefeasibility study on a 200 MWe large-scale demonstration has progressed well, and is ready for implementation. The overall research development and demonstration （RD＆D） roadmap for oxyfuel combustion in China has become a critical component of the global RD＆D roadmap for oxyfuel combustion. An air combustion/oxyfuel combustion compatible design philosophy was developed during the RD＆D process. In this paper, we briefly address fundamental research and technology innovation efforts regarding several technical challenges, including combustion stability, heat transfer, system operation, mineral impurities, and corrosion. To further reduce the cost of carbon capture, in addition to the large-scale deployment of oxyfuel technology, increasing interest is anticipated in the novel and next- generation oxyfuel combustion technologies that are briefly introduced here, including a new oxygen-production concept and flameless oxyfuel combustion.展开更多
Laser-induced breakdown spectroscopy （LIBS） has been used to detect atomic species in various enviromnents. The quantitative analysis （C, H, O, N and S） of representative coal samples are being carried out with LI...Laser-induced breakdown spectroscopy （LIBS） has been used to detect atomic species in various enviromnents. The quantitative analysis （C, H, O, N and S） of representative coal samples are being carried out with LIBS, and the effects of particle size are analyzed. A powerful pulse Nd：YAG laser is focused on the coal sample at atmosphere pressure, and the emission spectra from laser-induced plasmas are measured by time-resolved spectroscopy, and the intensity of analyzed spectral lines is obtained through observing the laser plasma with a delay time of 0.4 #s. The experimental results show that the slope of calibration curve is nearly 1 when the concentration of the analyzed element is relatively low, and the slope of curve is nearly 0.5 when the concentration of C is higher than other elements. In addition, using the calibration-free model without self-absorption effect, the results show that the decreasing of particle size leads to an increase of the plasma temperature.展开更多
Experimental investigations on the flexibility of a 300 MW Arch Firing (AF) coal-fired boiler when burning low quality coals is reported. Measurements of gas temperature and species concentration and char sampling usi...Experimental investigations on the flexibility of a 300 MW Arch Firing (AF) coal-fired boiler when burning low quality coals is reported. Measurements of gas temperature and species concentration and char sampling using a water-cooled suction pyrometer were carried out along the furnace elevation. The carbon content and the size distribu-tions of the char samples were obtained. The char morphology was examined using a field emission scanning electron microscope (FESEM). The char sampling was performed on this type of boiler for the first time. The results indicate that the flexibility of this boiler burning low quality coals under a moderate boiler load is better than its flexibility under a high boiler load. Because of the insufficient capacity of the coal pulverizers used,in case of low coal quality the pul-verized coal fineness will drastically decrease under high boiler loads. This causes an increase in the loss due to incom-plete mechanical and chemical combustion. This is the main cause of a low burnout degree of the pulverized coal and the decrease of the flexibility of this AF boiler under a high boiler load.展开更多
Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co, Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.ll coal seam, Antaibao surface mine, Shanxi Province were determined using I...Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co, Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.ll coal seam, Antaibao surface mine, Shanxi Province were determined using Instrumental Neutron Activation Analysis （INAA）, Inductively Coupled Plasma Atomic Emission Spectrometry （ICP-AES）, Cold-Vapor Atomic Absorption Spectrometry （CV-AAS） and Graphite Furnace Atomic Absorption Spectrometry （GF-AAS）. Comparisons with average concentrations of trace elements in Chinese coal show that the concentrations of Hg and Cd in the No. 11 coal seam, Antaibao surface mine are much higher. They may be harmful to the environment in the process of utilization. The variations of the trace elements contents and pyritic suffur in vertical section indicated that： （a） the concentrations of As, Pb, Mn, and pyritic sulfur decrease from roof to floor; （b） the concentrations of Cr, Zn and Mo are higher in roof, floor and lower in coal seam; （c） the concentration of Br, Sb, and Hg are higher in coal seam and lower in roof and floor; （d） the concentrations of Mo, V, Th and AI vary consistently with the ash yield. Cluster analysis of trace elements, pyritic sulfur, ash yield and major elements, such as AI, Fe, P, Ca shows that： （a） pyritic sulfur, Fe, As, Mn, Ni, Be are closely associated and reflect the influence of pyrite; （b） Mo, Se, Pb, Cr, Th, Co, Ca and A! are related to clay mineral, which is the main source of ash; （c） U, Zn, V, Na, P maybe controlled by phosphate or halite; （d） Hg, Br, Sb and Cd may be mainly organic-associated elements which fall outside the three main groups. The concentration distribution characteristics of trace elements in coal seam and the cluster analysis of major and trace elements showed that the contents of trace elements in the No. 11 coal seam, Antaibao surface mine, are mainly controlled by detrital input and migration from roof and floor.展开更多
CaO based sorbents have great potential for commercial use to capture CO_(2) of power plants.In the demand of producing sorbents with better cyclic performance,CaO-based sorbents derived from different kinds of calciu...CaO based sorbents have great potential for commercial use to capture CO_(2) of power plants.In the demand of producing sorbents with better cyclic performance,CaO-based sorbents derived from different kinds of calcium precursors,containing calcium carbonate(CC-CaO),calcium gluconate monohydrate(CG-CaO),calcium citrate(CCi-CaO)and calcium acetate monohydrate(CA-CaO),were tested cyclically and compared using simultaneous thermal analyzer(STA).And further study was conducted on the sorbents modified with citric acid monohydrate and 50%gluconic acid solution by wet mixing combustion synthesis.The modified sorbents showed better performance and higher pore parameters as well as porous microstructure with more organic acid added.After 20 cycles of carbonation and calcination,the C2CCi8(CaO:citric acid=2:8 by mass ratio)and C2G8(CaO:gluconic acid=2:8 by mass ratio)sorbent possess CO_(2) capture capacity of 0.45g·g^(-1)(g CO_(2) per g sorbents)and 0.52 g·g^(-1) respectively.The citric acid was more effective for modification than gluconic acid for extended 50 cycles.Furthermore,good linear relationship between CaO conversion and specific surface area as well as pore volume were determined,of which the specific surface area showed closer correlation with CaO conversion。展开更多
Until now, it has been difficult to obtain on-line three-dimensional (3-D) temperature distribution information which can reflect the overall combustion condition in the furnace of a coal-fired power plant boiler. A c...Until now, it has been difficult to obtain on-line three-dimensional (3-D) temperature distribution information which can reflect the overall combustion condition in the furnace of a coal-fired power plant boiler. A combustion monitoring system is introduced which can solve the problem efficiently. Through this system, the 3-D temperature distribution in a coal-fired boiler furnace can be obtained using a novel flame image processing technique. Briefly, we first outline the visualization principle. Then, the hardware and software design of the system in a 300 MW twin-furnace coal-fired boiler are introduced in detail. The visualization of the 3-D temperature distribution in the twin-furnace boiler is realized with an industrial computer and the Distributed Control System (DCS) of the boiler. The practical operation of the system shows that it can provide valuable combustion information of a furnace and is useful for the combustion diagnosis and adjustment in coal-fired power plants.展开更多
On-site measurements of volatile organic compounds(VOCs)in different streams of flue gas were carried out on a real coal-fired power plant using sampling bags and SUMMA canisters to collect gas samples,filters to coll...On-site measurements of volatile organic compounds(VOCs)in different streams of flue gas were carried out on a real coal-fired power plant using sampling bags and SUMMA canisters to collect gas samples,filters to collect particle samples.Gas chromatography-flame ionization detector/mass spectrometry and gas chromatography-mass spectrometry was the offline analysis method.We found that the total mass concentration of the tested 102 VOC species at the outlet of wet flue gas desulfuration device was(13456±47)μg·m^(-3),which contained aliphatic hydrocarbons(57.9%),aromatic hydrocarbons(26.8%),halogen-containing species(14.5%),and a small amount of oxygen-containing and nitrogencontaining species.The most abundant species were 1-hexene,n-hexane and 2-methylpentane.The top ten species in terms of mass fraction(with a total mass fraction of 75.3%)were mainly hydrocarbons with a carbon number of 6 or higher and halogenated hydrocarbons with a lower carbon number.The mass concentration of VOC species in the particle phase was significantly lower than that in the gas phase.The change of VOC mass concentrations along the air pollution control devices indicates that conventional pollutant control equipment had a limited effect on VOC reduction.Ozone formation potential calculations showed that aromatic hydrocarbons contributed the highest ozone formation(46.4%)due to their relatively high mass concentrations and MIR(maximum increment reactivity)values.展开更多
An atomic-level insight into the H_(2)adsorption and oxidation on the Fe_(2)O_(3)surface during chemicallooping combustion was provided on the basis of density functional theory calculations in this study.The results ...An atomic-level insight into the H_(2)adsorption and oxidation on the Fe_(2)O_(3)surface during chemicallooping combustion was provided on the basis of density functional theory calculations in this study.The results indicated that H_(2)molecule most likely chemisorbs on the Fe_(2)O_(3)surface in a dissociative mode.The decomposed H atoms then could adsorb on the Fe and O atoms or on the two neighboring O atoms of the surface.In particular,the H_(2)molecule adsorbed on an O top site could directly form H_(2)O precursor on the O_(3)-terminated surface.Further,the newly formed H-O bond was activated,and the H atom could migrate from one O site to another,consequently forming the H_(2)O precursor.In the H_(2)oxidation process,the decomposition of H_(2)molecule was the rate-determining step for the O_(3)-terminated surface with an activation energy of 1.53 eV.However,the formation of H_(2)O was the ratedetermining step for the Fe-terminated surface with an activation energy of 1.64 eV.The Feterminated surface is less energetically favorable for H_(2)oxidation than that the O_(3)-terminated surface owing to the steric hindrance of Fe atom.These results provide a fundamental understanding about the reaction mechanism of Fe_(2)O_(3)with H_(2),which is helpful for the rational design of Fe-based oxygen carrier and the usage of green energy resource such as H_(2).展开更多
The unburned carbon concentration in fly ash and the influence of main factors on the reduction of nitrogen oxides during gaseous fuel reburning process were experimentally studied in a 36 kW down-fired furnace when f...The unburned carbon concentration in fly ash and the influence of main factors on the reduction of nitrogen oxides during gaseous fuel reburning process were experimentally studied in a 36 kW down-fired furnace when five typical coals with different qualities were served as the primary fuel. It is found that the higher nitrogen oxide reduction efficiency can be obtained by reburning process when the coal used as the primary fuel contains more volatile matter. But under the optimizational operating conditions, both above 50% nitrogen oxide reduction and low carbon loss can be achieved by reburning process even though the primary fuel is the low-volatile coal. The experimental results show that the reasonable residence time in reburn zone is 0.6-0.9 s, the appropriate gaseous reburn fuel percentage is 10%-15% and the optimal average excess air coefficient in reburn zone is 0.8-0.9. These results extend the ranges of the key parameter values for reburning process with respect to that the low-volatile coals are used as the primary fuel.展开更多
Calcium looping method has been considered as one of the efficient options to capture C02 in the combustion Ilue gas. CaO-based sorbent is the basis for application of calcium looping and should be subjected to the se...Calcium looping method has been considered as one of the efficient options to capture C02 in the combustion Ilue gas. CaO-based sorbent is the basis for application of calcium looping and should be subjected to the severe calcination condition so as to obtain the concentrated C02 stream. In this research, CaO/CaZrO3 sorbents were synthesized using the sol-gel combustion synthesis （SGCS） method with urea as fuel. The cyclic reaction performance of the synthesized sorbents was evaluated on a lab-scaled reactor system through calcination at 950 ℃ in a pure C02 atmosphere and carbonation at 650 ℃ in the 15% （by volume） C02. The mass ratio of CaO to CaZr03 as 8：2 （designated as CasZr2） was screened as the best option among all the synthesized CaO sorbents for its high CO2 capture capacity and carbonation conversion at the initial cycle. And then a gradual decay in the C02 capture capacity was observed at the following 10 successive cycles, but hereafter stabilized throughout the later cycles. Furthermore, structural evolution of the carbonated CasZr2 over the looping cycles was investigated. With increasing looping cycles, the pore peak and mean grain size of the carbonated CasZr2 sorbent shifted to the bigger direction but both the surface area （SA） ratio and surface fractal dimension Ds decreased. Finally, morphological transformation of the carbonated CasZr2 was observed. Agglomeration and edge rounding of the newly formed CaC03 grains were found as aggravated at the cyclic carbonation stage. As a result, carbonation of CasZr2 with C02 was observed only confined to the external active CaO by the fast formation of the CaC03 shell outside, which occluded the further carbonation of the unreacted CaO inside. Therefore, enough attention should be paid to the carbonation stage and more effective activation measures should be explored to ensure the unreacted active CaO fully carbonatPd river the extended Ioonin cycles.展开更多
This work presents a simulation study of several Ca-Cu looping variants with CO(2)capture,aiming at both parameter optimization and exergy analysis of these Ca-Cu looping systems.Three kinds of Ca-Cu looping are consi...This work presents a simulation study of several Ca-Cu looping variants with CO(2)capture,aiming at both parameter optimization and exergy analysis of these Ca-Cu looping systems.Three kinds of Ca-Cu looping are considered:(1)carbonation-calcination/reduction-oxidation;(2)carbonation-oxidation-calcination/reduction and (3)carbona tion/oxidation-calcination/reduction.A conventional Ca looping is also simulated for comparison.The influences of the calcination temperature on the mole fractions of CO(2)and CaO at the calciner outlet,the CaCO3 flow rate on the carbonator performance and the Cu/Ca ratio on the calciner performance are analyzed.The second kind of Ca-Cu looping has the highest carbonation conversion.At 1×10^5 Pa and 820℃,complete decomposition of CaCO3 can be achieved in three Ca-Cu looping systems,while the operation condition of 1×10^5 Pa,840℃is required for the conventional Ca looping system.Furthermore,the Cu/Ca molar ratio of 5.13-5.19 is required for the Ca-Cu looping.Exergy analyses show that the maximum exergy destruction occurs in the calciner for the four modes and the second Ca-Cu looping system(i.e.,carbonation-oxidation-calcination/reduction)performs the highest exergy efficiency,up to 65.04%,which is about 30%higher than that of the conventional Ca looping.展开更多
Catalytic pyrolysis of digestate to produce aromatic hydrocarbons can be combined with anaerobic fermentation to effectively transform and utilize all biomass components,which can achieve the meaningful purpose of tra...Catalytic pyrolysis of digestate to produce aromatic hydrocarbons can be combined with anaerobic fermentation to effectively transform and utilize all biomass components,which can achieve the meaningful purpose of transforming waste into high-value products.This study explored whether catalytic pyrolysis of digestate is feasible to prepare aromatic hydrocarbons by analyzing the thermogravimetric characteristics,pyrolysis characteristics,and catalytic pyrolysis characteristics of digestate.For digestate pyrolysis,an increase in temperature was found to elevate the CO,CH_4,and monocyclic aromatic hydrocarbon(benzene,toluene,and xylene;BTX)content,whereas it decreased the contents of phenols,acids,aldehydes,and other oxygenates.Furthermore,the catalytic pyrolysis process effectively inhibited the acids,phenols,and furans in the liquid,whereas the yield of BTX increased from 25.45%to 45.99%,and the selectivity of xylene was also increased from 10.32%to 28.72%after adding ZSM-5.ZSM-5 also inhibited the production of nitrogenous compounds.展开更多
Typical biomass torrefaction is a mild pyrolysis process under conditions of ordinary pressure,low temperature(200–300°C)and inert atmosphere.Torrefaction is considered to be a competitive technology for biomass...Typical biomass torrefaction is a mild pyrolysis process under conditions of ordinary pressure,low temperature(200–300°C)and inert atmosphere.Torrefaction is considered to be a competitive technology for biomass pretreatment,but its impacts on the emissions of particulate matter from biomass combustion are worthy of further study.In this paper,three kinds of biomass,i.e.,bagasse,wheat straw and sawdust were selected for torrefaction pretreatment and the impacts of torrefaction on the emission characteristics of PM_(10) from biomass combustion were investigated.The combustion experiments were carried out on a drop tube furnace.The combustion-generated particulate and bulk ash samples were collected and subjected to analyses by various techniques.The results show that torrefaction tends to result in a reduction of PM_(1)(particulates with an aerodynamic diameter less than 1μm)emissions from combustion,but the extent of reduction is dependent on biomass type.The reduction of PM_(1) from the combustion of torrefied biomass is mainly because that the torrefaction process removes some Cl and S from the biomass,thereby suppressing the release of alkali metals and the emissions of PM_(1) during the combustion process.As for PM_(1–10)(particulates with an aerodynamic diameter within 1–10μm),its emissions from combustion of torrefied biomasses are consistently reduced,compared with their untreated counterparts.This observation is primarily accounted for the enhanced particle coalescence/agglomeration in combustion of torrefied biomasses,which reduces the emissions of PM_(1–10).展开更多
The application of forced mercury oxidation technology would lead to an increase of Hg^(2+)concentration in the flue gas.Although Hg^(2+)can be easily removed in the WFGD,the mercury re-emission in the WFGD can decrea...The application of forced mercury oxidation technology would lead to an increase of Hg^(2+)concentration in the flue gas.Although Hg^(2+)can be easily removed in the WFGD,the mercury re-emission in the WFGD can decrease the total removal of mercury from coal-fired power plants.Hence,it is necessary to control Hg^(2+)concentration in the devices before the WFGD.Fly ash adsorbent is considered as a potential alternative for commercial activated carbon adsorbent.However,the adsorption efficiency of the original fly ash is low.Modification procedure is needed to enhance the adsorption performance.In this study,the adsorption of Hg^(2+)by brominated fly ash was studied.The fly ash was collected from the full-scale power plant utilizing bromide-blended coal combustion technology.The brominated fly ash exhibited excellent performance for Hg^(2+)removal.The flue gas component HBr and SO_(2)could improve adsorbent’s performance,while HCl would hinder its adsorption process.Also,it was demonstrated by Hg-TPD experiments that the adsorbed Hg^(2+)mainly existed on the fly ash surface in the form of HgBr_(2).In summary,the brominated fly ash has a broad application prospect for mercury control.展开更多
Pretreatment before biomass combustion is significant for its efficient utilization and that combined water washing and carbonization can be efficient.An agricultural processing residues sesame stalk was selected and ...Pretreatment before biomass combustion is significant for its efficient utilization and that combined water washing and carbonization can be efficient.An agricultural processing residues sesame stalk was selected and carried out two pretreatments separately,i.e.,water washing-torrefaction(W-T)and torrefaction-water washing(T-W),to explore the effect on the fuel properties,combustion characteristics and particulate matter(PM)emission.The obtained biochar was also combusted under air and oxy50(CO_(2):O_(2)=50:50)conditions for the sake of investigating the effect of pretreatment and combustion atmosphere.The results indicate that,W-T and T-W both not only have great effect on the improvement of fuel properties but also reduce the content of water-soluble elements like K,Cl,etc.Due to the difference in hydrophobicity,the biochar obtained by W-T have the optimal fuel properties.At the same time,the pretreatment also hinder the combustion in a certain extent in which the comprehensive combustion characteristics(SN)show a downward trend.Furthermore,both two pretreatments have obvious benefit on the reduction of PM_(1)emission and W-T have the best effect related to the higher removal efficiency of inorganic elements(especially K+Na+Cl+S).Under oxy50 condition,the oxygen concentration and combustion temperature is higher,improving the sulfation of K and vaporization of Ca,P and Mg which result in weakening in the pretreatment reduction effect on PM_(1)emission.展开更多
基金support from the National Natural Science Foundation of China (No.51806072)。
文摘Solid-state electrolyte Li_(10)GeP_(2)S_(12)(LGPS)has a high lithium ion conductivity of 12 mS cm^(-1)at room temperature,but its inferior chemical stability against lithium metal anode impedes its practical application.Among all solutions,Ge atom substitution of the solid-state electrolyte LGPS stands out as the most promising solution to this interface problem.A systematic screening framework for Ge atom substitution including ionic conductivity,thermodynamic stability,electronic and mechanical properties is utilized to solve it.For fast screening,an enhanced model Dop Net FC using chemical formulas for the dataset is adopted to predict ionic conductivity.Finally,Li_(10)SrP_(2)S_(12)(LSrPS)is screened out,which has high lithium ion conductivity(12.58 mS cm^(-1)).In addition,an enhanced migration of lithium ion across the LSr PS/Li interface is found.Meanwhile,compared to the LGPS/Li interface,LSrPS/Li interface exhibits a larger Schottky barrier(0.134 eV),smaller electron transfer region(3.103?),and enhanced ability to block additional electrons,all of which contribute to the stabilized interface.The applied theoretical atom substitution screening framework with the aid of machine learning can be extended to rapid determination of modified specific material schemes.
基金the National Key Research and Development Program of China(No.2016YFB0600601)National Natural Science Foundation of China(Nos.51676075 and 51520105008).
文摘The previous work found that the additive kaolin could scavenge not only sodium(Na)but also calcium(Ca)and magnesium(Mg),which is the important ash fluxing agents in low rank coal combustion.Such scavenging effects of kaolin on fine ash formation were studied in the present work.A typical Zhundong coal and its blends with kaolin at dosages of 1,2 and 4 wt%were combusted in an electrically heated drop tube furnace(DTF)at 1300℃.The fine ashes generated were collected and size segregated by a low pressure impactor(LPI).The morphology and chemical composition of fine ash were analyzed by scanning electron microscopy equipped with an energydispersive spectrometer(SEM-EDS).In addition,char/ash particles were sampled at various positions of DTF to elucidate how kaolin additive affected the fine ash formation process.The results further showed that apart from the scavenging of volatile Na,kaolin additive could also strongly scavenge the refractory Ca,Mg and Fe in the fine ash during Zhundong coal combustion,which transformed the sintered particles with irregular shape into melted spherical particles,and finally resulted in the considerable decrease of these elements in both PM_(0.4)and PM_(0.4-10)by melting and agglomeration.The close contacts between kaolin particles and coal resulted from physically mixing were a key factor responsible for the reaction of kaolin with the refractory Ca,Mg and Fe.
基金Supported by the National Natural Science Foundation of China(50936001)
文摘This paper reports an investigation of Computational Fluid Dynamics(CFD)on the influence of injection momentum rate of premixed air and fuel on the flameless Moderate or Intense Low oxygen Dilution(MILD) combustion in a recuperative furnace.Details of the furnace flow velocity,temperature,O2,CO2 and NOx concentrations are provided.Results obtained suggest that the flue gas recirculation plays a vital role in establishing the premixed MILD combustion.It is also revealed that there is a critical momentum rate of the fuel-air mixture below which MILD combustion does not occur.Moreover,the momentum rate appears to have less significant influence on conventional global combustion than on MILD combustion.
基金supported by the National Key Basic Research and Development Program (2011CB707301)the National Key Technology R&D Program (2011BAC05B00)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education (20130142130009)the Fund of State Key Laboratory of Coal Combustion
文摘Oxyfuel combustion with carbon capture and sequestration （CCS） is a carbon-reduction technology for use in large-scale coal-fired power plants. Significant progress has been achieved in the research and development of this technology during its scaling up from 0.4 MWth to 3 MWth and 35 aWth by the combined efforts of universities and industries in China. A prefeasibility study on a 200 MWe large-scale demonstration has progressed well, and is ready for implementation. The overall research development and demonstration （RD＆D） roadmap for oxyfuel combustion in China has become a critical component of the global RD＆D roadmap for oxyfuel combustion. An air combustion/oxyfuel combustion compatible design philosophy was developed during the RD＆D process. In this paper, we briefly address fundamental research and technology innovation efforts regarding several technical challenges, including combustion stability, heat transfer, system operation, mineral impurities, and corrosion. To further reduce the cost of carbon capture, in addition to the large-scale deployment of oxyfuel technology, increasing interest is anticipated in the novel and next- generation oxyfuel combustion technologies that are briefly introduced here, including a new oxygen-production concept and flameless oxyfuel combustion.
基金The project supported by Specialized Research Fund for the Doctoral Program of Higher Education (No. 20020487013) and bythe Key Program for International Cooperation of Science and Technology of China (No. 2001 CB711203)
文摘Laser-induced breakdown spectroscopy （LIBS） has been used to detect atomic species in various enviromnents. The quantitative analysis （C, H, O, N and S） of representative coal samples are being carried out with LIBS, and the effects of particle size are analyzed. A powerful pulse Nd：YAG laser is focused on the coal sample at atmosphere pressure, and the emission spectra from laser-induced plasmas are measured by time-resolved spectroscopy, and the intensity of analyzed spectral lines is obtained through observing the laser plasma with a delay time of 0.4 #s. The experimental results show that the slope of calibration curve is nearly 1 when the concentration of the analyzed element is relatively low, and the slope of curve is nearly 0.5 when the concentration of C is higher than other elements. In addition, using the calibration-free model without self-absorption effect, the results show that the decreasing of particle size leads to an increase of the plasma temperature.
基金Projects 2006AA05Z301 supported by the Hi-tech Research and Development Program of China50636010 by the National Natural Science Foundation of China
文摘Experimental investigations on the flexibility of a 300 MW Arch Firing (AF) coal-fired boiler when burning low quality coals is reported. Measurements of gas temperature and species concentration and char sampling using a water-cooled suction pyrometer were carried out along the furnace elevation. The carbon content and the size distribu-tions of the char samples were obtained. The char morphology was examined using a field emission scanning electron microscope (FESEM). The char sampling was performed on this type of boiler for the first time. The results indicate that the flexibility of this boiler burning low quality coals under a moderate boiler load is better than its flexibility under a high boiler load. Because of the insufficient capacity of the coal pulverizers used,in case of low coal quality the pul-verized coal fineness will drastically decrease under high boiler loads. This causes an increase in the loss due to incom-plete mechanical and chemical combustion. This is the main cause of a low burnout degree of the pulverized coal and the decrease of the flexibility of this AF boiler under a high boiler load.
基金This research was supported by the National Natural Science Foundation of China （No. 90010017 and No. 40272071）the National Major Fundamental Research and Development Project （2006 CB200304）.
文摘Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co, Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.ll coal seam, Antaibao surface mine, Shanxi Province were determined using Instrumental Neutron Activation Analysis （INAA）, Inductively Coupled Plasma Atomic Emission Spectrometry （ICP-AES）, Cold-Vapor Atomic Absorption Spectrometry （CV-AAS） and Graphite Furnace Atomic Absorption Spectrometry （GF-AAS）. Comparisons with average concentrations of trace elements in Chinese coal show that the concentrations of Hg and Cd in the No. 11 coal seam, Antaibao surface mine are much higher. They may be harmful to the environment in the process of utilization. The variations of the trace elements contents and pyritic suffur in vertical section indicated that： （a） the concentrations of As, Pb, Mn, and pyritic sulfur decrease from roof to floor; （b） the concentrations of Cr, Zn and Mo are higher in roof, floor and lower in coal seam; （c） the concentration of Br, Sb, and Hg are higher in coal seam and lower in roof and floor; （d） the concentrations of Mo, V, Th and AI vary consistently with the ash yield. Cluster analysis of trace elements, pyritic sulfur, ash yield and major elements, such as AI, Fe, P, Ca shows that： （a） pyritic sulfur, Fe, As, Mn, Ni, Be are closely associated and reflect the influence of pyrite; （b） Mo, Se, Pb, Cr, Th, Co, Ca and A! are related to clay mineral, which is the main source of ash; （c） U, Zn, V, Na, P maybe controlled by phosphate or halite; （d） Hg, Br, Sb and Cd may be mainly organic-associated elements which fall outside the three main groups. The concentration distribution characteristics of trace elements in coal seam and the cluster analysis of major and trace elements showed that the contents of trace elements in the No. 11 coal seam, Antaibao surface mine, are mainly controlled by detrital input and migration from roof and floor.
基金supported by National Natural Science Foundation of China(51606076),and Analytical and Testing Center of HUST for FSEM measurements.
文摘CaO based sorbents have great potential for commercial use to capture CO_(2) of power plants.In the demand of producing sorbents with better cyclic performance,CaO-based sorbents derived from different kinds of calcium precursors,containing calcium carbonate(CC-CaO),calcium gluconate monohydrate(CG-CaO),calcium citrate(CCi-CaO)and calcium acetate monohydrate(CA-CaO),were tested cyclically and compared using simultaneous thermal analyzer(STA).And further study was conducted on the sorbents modified with citric acid monohydrate and 50%gluconic acid solution by wet mixing combustion synthesis.The modified sorbents showed better performance and higher pore parameters as well as porous microstructure with more organic acid added.After 20 cycles of carbonation and calcination,the C2CCi8(CaO:citric acid=2:8 by mass ratio)and C2G8(CaO:gluconic acid=2:8 by mass ratio)sorbent possess CO_(2) capture capacity of 0.45g·g^(-1)(g CO_(2) per g sorbents)and 0.52 g·g^(-1) respectively.The citric acid was more effective for modification than gluconic acid for extended 50 cycles.Furthermore,good linear relationship between CaO conversion and specific surface area as well as pore volume were determined,of which the specific surface area showed closer correlation with CaO conversion。
基金Project 50636010 supported by the National Natural Science Foundation of China
文摘Until now, it has been difficult to obtain on-line three-dimensional (3-D) temperature distribution information which can reflect the overall combustion condition in the furnace of a coal-fired power plant boiler. A combustion monitoring system is introduced which can solve the problem efficiently. Through this system, the 3-D temperature distribution in a coal-fired boiler furnace can be obtained using a novel flame image processing technique. Briefly, we first outline the visualization principle. Then, the hardware and software design of the system in a 300 MW twin-furnace coal-fired boiler are introduced in detail. The visualization of the 3-D temperature distribution in the twin-furnace boiler is realized with an industrial computer and the Distributed Control System (DCS) of the boiler. The practical operation of the system shows that it can provide valuable combustion information of a furnace and is useful for the combustion diagnosis and adjustment in coal-fired power plants.
基金funded by the National Natural Science Foundation of China(52006079)the Natural Science Foundation of Hubei Province(2020CFB247)the National Key Research and Development Program of China(2018YFB0605201)。
文摘On-site measurements of volatile organic compounds(VOCs)in different streams of flue gas were carried out on a real coal-fired power plant using sampling bags and SUMMA canisters to collect gas samples,filters to collect particle samples.Gas chromatography-flame ionization detector/mass spectrometry and gas chromatography-mass spectrometry was the offline analysis method.We found that the total mass concentration of the tested 102 VOC species at the outlet of wet flue gas desulfuration device was(13456±47)μg·m^(-3),which contained aliphatic hydrocarbons(57.9%),aromatic hydrocarbons(26.8%),halogen-containing species(14.5%),and a small amount of oxygen-containing and nitrogencontaining species.The most abundant species were 1-hexene,n-hexane and 2-methylpentane.The top ten species in terms of mass fraction(with a total mass fraction of 75.3%)were mainly hydrocarbons with a carbon number of 6 or higher and halogenated hydrocarbons with a lower carbon number.The mass concentration of VOC species in the particle phase was significantly lower than that in the gas phase.The change of VOC mass concentrations along the air pollution control devices indicates that conventional pollutant control equipment had a limited effect on VOC reduction.Ozone formation potential calculations showed that aromatic hydrocarbons contributed the highest ozone formation(46.4%)due to their relatively high mass concentrations and MIR(maximum increment reactivity)values.
基金supported by National Natural Science Foundation of China(51976071)Fundamental Research Funds for the Central Universities(2019kfy RCPY021)。
文摘An atomic-level insight into the H_(2)adsorption and oxidation on the Fe_(2)O_(3)surface during chemicallooping combustion was provided on the basis of density functional theory calculations in this study.The results indicated that H_(2)molecule most likely chemisorbs on the Fe_(2)O_(3)surface in a dissociative mode.The decomposed H atoms then could adsorb on the Fe and O atoms or on the two neighboring O atoms of the surface.In particular,the H_(2)molecule adsorbed on an O top site could directly form H_(2)O precursor on the O_(3)-terminated surface.Further,the newly formed H-O bond was activated,and the H atom could migrate from one O site to another,consequently forming the H_(2)O precursor.In the H_(2)oxidation process,the decomposition of H_(2)molecule was the rate-determining step for the O_(3)-terminated surface with an activation energy of 1.53 eV.However,the formation of H_(2)O was the ratedetermining step for the Fe-terminated surface with an activation energy of 1.64 eV.The Feterminated surface is less energetically favorable for H_(2)oxidation than that the O_(3)-terminated surface owing to the steric hindrance of Fe atom.These results provide a fundamental understanding about the reaction mechanism of Fe_(2)O_(3)with H_(2),which is helpful for the rational design of Fe-based oxygen carrier and the usage of green energy resource such as H_(2).
基金Projects(50806025 50721005) supported by the National Natural Science Foundation of China
文摘The unburned carbon concentration in fly ash and the influence of main factors on the reduction of nitrogen oxides during gaseous fuel reburning process were experimentally studied in a 36 kW down-fired furnace when five typical coals with different qualities were served as the primary fuel. It is found that the higher nitrogen oxide reduction efficiency can be obtained by reburning process when the coal used as the primary fuel contains more volatile matter. But under the optimizational operating conditions, both above 50% nitrogen oxide reduction and low carbon loss can be achieved by reburning process even though the primary fuel is the low-volatile coal. The experimental results show that the reasonable residence time in reburn zone is 0.6-0.9 s, the appropriate gaseous reburn fuel percentage is 10%-15% and the optimal average excess air coefficient in reburn zone is 0.8-0.9. These results extend the ranges of the key parameter values for reburning process with respect to that the low-volatile coals are used as the primary fuel.
基金Supported by the National Natural Science Foundation of China(51276210,50906030,31301586)the Partial Financial Grant of North China University of Water Resources and Electric Power(201012)the National Basic Research Program of China(2011CB707301)
文摘Calcium looping method has been considered as one of the efficient options to capture C02 in the combustion Ilue gas. CaO-based sorbent is the basis for application of calcium looping and should be subjected to the severe calcination condition so as to obtain the concentrated C02 stream. In this research, CaO/CaZrO3 sorbents were synthesized using the sol-gel combustion synthesis （SGCS） method with urea as fuel. The cyclic reaction performance of the synthesized sorbents was evaluated on a lab-scaled reactor system through calcination at 950 ℃ in a pure C02 atmosphere and carbonation at 650 ℃ in the 15% （by volume） C02. The mass ratio of CaO to CaZr03 as 8：2 （designated as CasZr2） was screened as the best option among all the synthesized CaO sorbents for its high CO2 capture capacity and carbonation conversion at the initial cycle. And then a gradual decay in the C02 capture capacity was observed at the following 10 successive cycles, but hereafter stabilized throughout the later cycles. Furthermore, structural evolution of the carbonated CasZr2 over the looping cycles was investigated. With increasing looping cycles, the pore peak and mean grain size of the carbonated CasZr2 sorbent shifted to the bigger direction but both the surface area （SA） ratio and surface fractal dimension Ds decreased. Finally, morphological transformation of the carbonated CasZr2 was observed. Agglomeration and edge rounding of the newly formed CaC03 grains were found as aggravated at the cyclic carbonation stage. As a result, carbonation of CasZr2 with C02 was observed only confined to the external active CaO by the fast formation of the CaC03 shell outside, which occluded the further carbonation of the unreacted CaO inside. Therefore, enough attention should be paid to the carbonation stage and more effective activation measures should be explored to ensure the unreacted active CaO fully carbonatPd river the extended Ioonin cycles.
基金financially supported by National Key R&D Program of China(2019YFE0100100)。
文摘This work presents a simulation study of several Ca-Cu looping variants with CO(2)capture,aiming at both parameter optimization and exergy analysis of these Ca-Cu looping systems.Three kinds of Ca-Cu looping are considered:(1)carbonation-calcination/reduction-oxidation;(2)carbonation-oxidation-calcination/reduction and (3)carbona tion/oxidation-calcination/reduction.A conventional Ca looping is also simulated for comparison.The influences of the calcination temperature on the mole fractions of CO(2)and CaO at the calciner outlet,the CaCO3 flow rate on the carbonator performance and the Cu/Ca ratio on the calciner performance are analyzed.The second kind of Ca-Cu looping has the highest carbonation conversion.At 1×10^5 Pa and 820℃,complete decomposition of CaCO3 can be achieved in three Ca-Cu looping systems,while the operation condition of 1×10^5 Pa,840℃is required for the conventional Ca looping system.Furthermore,the Cu/Ca molar ratio of 5.13-5.19 is required for the Ca-Cu looping.Exergy analyses show that the maximum exergy destruction occurs in the calciner for the four modes and the second Ca-Cu looping system(i.e.,carbonation-oxidation-calcination/reduction)performs the highest exergy efficiency,up to 65.04%,which is about 30%higher than that of the conventional Ca looping.
基金partially funded by the GTCLC-NEG project,which received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement (101018756)the Brisk 2 European project (731101)for funding this project.The project acronym was B2PB-SIN2-1001,and the project title was“Optimization of catalytic pyrolysis of digestate and sewage sludge.”。
文摘Catalytic pyrolysis of digestate to produce aromatic hydrocarbons can be combined with anaerobic fermentation to effectively transform and utilize all biomass components,which can achieve the meaningful purpose of transforming waste into high-value products.This study explored whether catalytic pyrolysis of digestate is feasible to prepare aromatic hydrocarbons by analyzing the thermogravimetric characteristics,pyrolysis characteristics,and catalytic pyrolysis characteristics of digestate.For digestate pyrolysis,an increase in temperature was found to elevate the CO,CH_4,and monocyclic aromatic hydrocarbon(benzene,toluene,and xylene;BTX)content,whereas it decreased the contents of phenols,acids,aldehydes,and other oxygenates.Furthermore,the catalytic pyrolysis process effectively inhibited the acids,phenols,and furans in the liquid,whereas the yield of BTX increased from 25.45%to 45.99%,and the selectivity of xylene was also increased from 10.32%to 28.72%after adding ZSM-5.ZSM-5 also inhibited the production of nitrogenous compounds.
基金funded by the National Key Research and Development Program of China(No.2016YFB0600601).
文摘Typical biomass torrefaction is a mild pyrolysis process under conditions of ordinary pressure,low temperature(200–300°C)and inert atmosphere.Torrefaction is considered to be a competitive technology for biomass pretreatment,but its impacts on the emissions of particulate matter from biomass combustion are worthy of further study.In this paper,three kinds of biomass,i.e.,bagasse,wheat straw and sawdust were selected for torrefaction pretreatment and the impacts of torrefaction on the emission characteristics of PM_(10) from biomass combustion were investigated.The combustion experiments were carried out on a drop tube furnace.The combustion-generated particulate and bulk ash samples were collected and subjected to analyses by various techniques.The results show that torrefaction tends to result in a reduction of PM_(1)(particulates with an aerodynamic diameter less than 1μm)emissions from combustion,but the extent of reduction is dependent on biomass type.The reduction of PM_(1) from the combustion of torrefied biomass is mainly because that the torrefaction process removes some Cl and S from the biomass,thereby suppressing the release of alkali metals and the emissions of PM_(1) during the combustion process.As for PM_(1–10)(particulates with an aerodynamic diameter within 1–10μm),its emissions from combustion of torrefied biomasses are consistently reduced,compared with their untreated counterparts.This observation is primarily accounted for the enhanced particle coalescence/agglomeration in combustion of torrefied biomasses,which reduces the emissions of PM_(1–10).
基金financially supported by the National Key Research and Development Program of China(Grant No.2016YFB0600603)National Natural Science Foundation of China(Grant No.51776084)Shenzhen Science and Technology Innovation Committee(Grant No.JCYJ20190809095003718).
文摘The application of forced mercury oxidation technology would lead to an increase of Hg^(2+)concentration in the flue gas.Although Hg^(2+)can be easily removed in the WFGD,the mercury re-emission in the WFGD can decrease the total removal of mercury from coal-fired power plants.Hence,it is necessary to control Hg^(2+)concentration in the devices before the WFGD.Fly ash adsorbent is considered as a potential alternative for commercial activated carbon adsorbent.However,the adsorption efficiency of the original fly ash is low.Modification procedure is needed to enhance the adsorption performance.In this study,the adsorption of Hg^(2+)by brominated fly ash was studied.The fly ash was collected from the full-scale power plant utilizing bromide-blended coal combustion technology.The brominated fly ash exhibited excellent performance for Hg^(2+)removal.The flue gas component HBr and SO_(2)could improve adsorbent’s performance,while HCl would hinder its adsorption process.Also,it was demonstrated by Hg-TPD experiments that the adsorbed Hg^(2+)mainly existed on the fly ash surface in the form of HgBr_(2).In summary,the brominated fly ash has a broad application prospect for mercury control.
基金the National Key Research and Development Program of China(No.2016YFB0600605)Hubei Province Technology Innovation Project(No.2018AHB017)National Natural Science Foundation of China(No.52076091).
文摘Pretreatment before biomass combustion is significant for its efficient utilization and that combined water washing and carbonization can be efficient.An agricultural processing residues sesame stalk was selected and carried out two pretreatments separately,i.e.,water washing-torrefaction(W-T)and torrefaction-water washing(T-W),to explore the effect on the fuel properties,combustion characteristics and particulate matter(PM)emission.The obtained biochar was also combusted under air and oxy50(CO_(2):O_(2)=50:50)conditions for the sake of investigating the effect of pretreatment and combustion atmosphere.The results indicate that,W-T and T-W both not only have great effect on the improvement of fuel properties but also reduce the content of water-soluble elements like K,Cl,etc.Due to the difference in hydrophobicity,the biochar obtained by W-T have the optimal fuel properties.At the same time,the pretreatment also hinder the combustion in a certain extent in which the comprehensive combustion characteristics(SN)show a downward trend.Furthermore,both two pretreatments have obvious benefit on the reduction of PM_(1)emission and W-T have the best effect related to the higher removal efficiency of inorganic elements(especially K+Na+Cl+S).Under oxy50 condition,the oxygen concentration and combustion temperature is higher,improving the sulfation of K and vaporization of Ca,P and Mg which result in weakening in the pretreatment reduction effect on PM_(1)emission.
