Traditional coal mining and utilisation patterns are severely detrimental to natural resources and environments and significantly impede safe, low-carbon, clean, and sustainable utilisation of coal resources. Based on...Traditional coal mining and utilisation patterns are severely detrimental to natural resources and environments and significantly impede safe, low-carbon, clean, and sustainable utilisation of coal resources. Based on the idea of in situ fluidized coal mining that aims to transform solid coal into liquid or gas and transports the fluidized resources to the ground to ensure safe mining and low-carbon and clean utilisation, in this study, we report on a novel in situ unmanned automatic mining method. This includes a flexible, earthworm-like unmanned automatic mining machine (UAMM) and a coal mine layout for in situ fluidized coal mining suitable for the UAMM. The technological and economic advantages and the carbon emission reduction of the UAMM-based in situ fluidized mining in contrast to traditional mining technologies are evaluated as well. The development trends and possible challenges to this design are also discussed. It is estimated that the proposed method costs approximately 49% of traditional coal mining costs. The UAMM-based in situ fluidized mining and transformation method will reduce CO2 emissions by at least 94.9% compared to traditional coal mining and utilisation methods. The proposed approach is expected to achieve safe and environmentally friendly coal mining as well as lowcarbon and clean utilisation of coal.展开更多
Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stre...Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.展开更多
Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this st...Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.展开更多
Fiber-reinforced polymer(FRP)wrapping is a potential technique for coal pillar reinforcement.In this study,an acoustic emission(AE)technique was employed to monitor coal specimens with carbon FRP(CFRP)jackets during u...Fiber-reinforced polymer(FRP)wrapping is a potential technique for coal pillar reinforcement.In this study,an acoustic emission(AE)technique was employed to monitor coal specimens with carbon FRP(CFRP)jackets during uniaxial compression,which addressed the inability to observe the cracks inside the FRP-reinforced coal pillars by conventional field inspection techniques.The spatiotemporal fractal evolution of the cumulated AE events during loading was investigated based on fractal theory.The results indicated that the AE response and fractal features of the coal specimens were closely related to their damage evolution,with CFRP exerting a significant influence.In particular,during the unstable crack development stage,the evolutionary patterns of the AE count and energy curves of the CFRPconfined specimens underwent a transformation from the slight shockemajor shock type to the slight shockesub-major shockeslight shockemajor shock type,in contrast to the unconfined coal specimens.The AE b-values decreased to a minimum and then increased marginally.The AE spatial fractal dimension increased rapidly,whereas the AE temporal fractal dimension fluctuated significantly during the accumulation and release of strain energy.Ultimately,based on the AE count and AE energy evolution,a damage factor was proposed for the coal samples with CFRP jackets.Furthermore,a damage constitutive model was established,considering the CFRP jacket and the compaction characteristics of the coal.This model provides an effective description of the stressestrain relationship of coal specimens with CFRP jackets.展开更多
The control and management of mining-induced seismic hazards have attracted ever-rising attention,especially in underground longwall coal mines,where continuous mining activities dynamically alter the stress states an...The control and management of mining-induced seismic hazards have attracted ever-rising attention,especially in underground longwall coal mines,where continuous mining activities dynamically alter the stress states and induce seismic events.In this work,the Epidemic Type Aftershock Sequence(ETAS)model was applied to formulate the aftershock catalogue of mining-induced seismicity and investigate the formation of event triggering associated with longwall mining.The conventional Baiesi and Paczuski method(2004)was used to separate longwall mining-induced seismic events into triggered and nontriggered catalogues.The latter catalogue contains both non-triggering(NT)-isolated events that do not trigger subsequent events and NT-parent events of the former catalogue.Statistical properties of triggered events were analysed spatially and temporally.The temporal triggering sequence follows the Omori-Utsu law,where the temporal decay of aftershocks is influenced by the magnitude of NT-parent events in mining-induced seismicity.The spatial distribution of aftershocks follows an inverted U-shaped relationship with distance to their corresponding NT-parent events.The quantitative forecasting of triggered events was performed based on the nonhomogeneous Poisson distribution,which achieved a good consistency with their NT-parent events.Amongst the non-triggered catalogue,NT-isolated events are concentrated ahead of NT-parent events,potentially acting as foreshocks for the latter.展开更多
Coal-rock interface identification technology was pivotal in automatically adjusting the shearer's cutting drum during coal mining.However,it also served as a technical bottleneck hindering the advancement of inte...Coal-rock interface identification technology was pivotal in automatically adjusting the shearer's cutting drum during coal mining.However,it also served as a technical bottleneck hindering the advancement of intelligent coal mining.This study aimed to address the poor accuracy of current coal-rock identification technology on comprehensive working faces,coupled with the limited availability of coal-rock datasets.The loss function of the SegFormer model was enhanced,the model's hyperparameters and learning rate were adjusted,and an automatic recognition method was proposed for coal-rock interfaces based on FL-SegFormer.Additionally,an experimental platform was constructed to simulate the dusty environment during coal-rock cutting by the shearer,enabling the collection of coal-rock test image datasets.The morphology-based algorithms were employed to expand the coal-rock image datasets through image rotation,color dithering,and Gaussian noise injection so as to augment the diversity and applicability of the datasets.As a result,a coal-rock image dataset comprising 8424 samples was generated.The findings demonstrated that the FL-SegFormer model achieved a Mean Intersection over Union(MIoU)and mean pixel accuracy(MPA)of 97.72%and 98.83%,respectively.The FLSegFormer model outperformed other models in terms of recognition accuracy,as evidenced by an MloU exceeding 95.70% of the original image.Furthermore,the FL-SegFormer model using original coal-rock images was validated from No.15205 working face of the Yulin test mine in northern Shaanxi.The calculated average error was only 1.77%,and the model operated at a rate of 46.96 frames per second,meeting the practical application and deployment requirements in underground settings.These results provided a theoretical foundation for achieving automatic and efficient mining with coal mining machines and the intelligent development of coal mines.展开更多
As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock bur...As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock burst induced by the combination of dynamic and static stresses and divided such rock burst into three types,including induced by primary dynamic stress,mainly induced by dynamic stress,and by dynamic stress in low critical stress state.The expressions of the static stress induced by coal mining and dynamic stress induced by mining tremors were obtained.Moreover,theories and technologies at home and abroad were summarized concerning the monitoring,forecasting,and preventing of rockburst.These mainly include the zoning and leveling forecasting method,electromagnetic radiation technology,elastic wave and seismic wave computed tomography technologies in aspect of rockburst monitoring,as well as the intensity weakening theory,the strong-soft-strong structure effect,the directional hydraulic fracturing technology,the roadway support system in regards of rockburst prevention.The prospect of rockburst development suggested that researches concerning the rockburst mechanism should be quantitatively developed around the roadway and coalface surrounding coal-rock mass.It should be focused on the rockburst mechanism and prevention technology of mining with over 1,000 km deep and mining in large tectonic zone.In addition,the monitoring and prevention of rockburst should be based on rockburst mechanism.展开更多
According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary...According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary and auxiliary boxes, power transmission system, mining system, loading system, gas charging system, data monitoring and intelligent acquisition system. The maximum experiment coal consumption is 1200 kg, the mining system is developed to conduct experiment for gas desorption under excavating disturbance, and the plane-charging cribriform ventilation device is developed to realize uniform ventilation for experiment coal sample, which is accord with the actual gas source situation of coal bed. The desorption characteristics of gas in coal are experimentally studied under the conditions of nature and mining using the experiment system. The results show that, compare with nature condition, the permeability of coal and the velocity of gas desorption could significantly increase under the influence of coal pressure relief and destruction caused by mining, and the degree of gas desorption could somewhat increase too. Finally, pressure relief gas extraction of current seam and adjacent seams after mining in a certain coal mine of Yangquan mining area are introduced, and the gas desorption experiment results is verified by analyzing the effect of gas extraction.展开更多
Mining induced pressures are strong and overburden failure areas are large in top coal caving longwall mining, which constrains high production and safety mining. By employing the combination of the full view borehole...Mining induced pressures are strong and overburden failure areas are large in top coal caving longwall mining, which constrains high production and safety mining. By employing the combination of the full view borehole photography technique and the seismic CT scanner technique, the deformation and failure of overlying strata of fully mechanized caving face in shallow coal seam were studied and the failure development of overburden was determined. Results show that the full view borehole photography can reveal the characteristics of strata, and the seismic CT scanner can reflect the characteristics of strata between the boreholes. The combined measurement technique can effectively determine the height of fractured and caved zones. The top end of the caved zone in Yangwangou coal mine employing the top coal caving longwall mining was at the depth of 171 m and fractured zone was at the depth of 106-110 m. The results provide a theoretic foundation for controlling the overburden strata in the shallow buried top coal caving panel.展开更多
In the process of green and smart mine construction under the context of carbon neutrality,China's coal safety situation has been continuously improved in recent years.In order to recognize the development of coal...In the process of green and smart mine construction under the context of carbon neutrality,China's coal safety situation has been continuously improved in recent years.In order to recognize the development of coal production in China and prepare for future monitoring and prevention of safety incidents,this study mainly elaborated on the basic situation of coal resources and national mining accidents over the past five years(2017-2021),from four dimensions(accident level,type,region,and time),and then proposed the preventive measures based on accident statistical laws.The results show that the storage of coal resources has obvious geographic characteristics,mainly concentrated in the Midwest,with coal resources in Shanxi and Shaanxi accounting for about 49.4%.The proportion of coal consumption has dropped from 70.2%to 56%between 2011 and 2021,but still accounts for more than half of the all.Meanwhile,the accident-prone areas are positively correlated with the amount of coal production.Among different levels of coal mine accidents,general accidents had the highest number of accidents and deaths,with 692 accidents and 783 deaths,accounting for 87.6%and 54.64%respectively.The frequency of roof,gas,and transportation accidents is relatively high,and the number of single fatalities caused by gas accidents is the largest,about 4.18.In terms of geographical distribution of accidents,the safety situation in Shanxi Province is the most severe.From the time distribution of coal mine accidents,the accidents mainly occurred in July and August,and rarely occurred in February and December.Finally,the"4+4"safety management model is proposed,combining the statistical results with coal production in China.Based on the existing health and safety management systems,the manage-ments are divided into four sub-categories,and more specific measures are suggested.展开更多
The coupling mechanism between mining-induced mechanical behavior and gas permeability of coal is effectively obtained in laboratory.This study means significant understanding of the prevention of coal-gas outburst.Th...The coupling mechanism between mining-induced mechanical behavior and gas permeability of coal is effectively obtained in laboratory.This study means significant understanding of the prevention of coal-gas outburst.The testing samples of coal were drilled from the 14120 mining face at the depth of690 m.Based on the redistribution of stress during the excavation,the coupling test between mechanical state and seepage has been designed using the triaxial servo-controlled seepage equipment for thermofluid-solid coupling of coal containing methane.It is the result that there are two main factors influencing the mining-induced mechanical behavior of coal,such as the change ofσ_1-σ_3 andΔσ_1-Δσ_3.The failure mode mainly depends on the value ofσ_1-σ_3,and the peak strength value mainly depends on the value ofΔσ_1-Δσ_3.The difference of mechanical response between geostress and mining-induced stress has been obtained,which can be a theoretical support for safe mining such as reasonable gas drainage,prevention of coal-gas outburst and gas over-limit.展开更多
To study the influence of coal mining on the stability of river levees,a mechanical model of mining-induced river levee deformation was established.This was based on the mining-induced deformation characteristics of r...To study the influence of coal mining on the stability of river levees,a mechanical model of mining-induced river levee deformation was established.This was based on the mining-induced deformation characteristics of river levees and the application of a typical surface subsidence function.Meanwhile,a failure criterion was proposed for river levees.Using some examples,the deformation of,and stress distribution through,river levees under the influence of mining were obtained:the maximum tensile stress on the bottom of the river levee was less than the tensile strength,under which circumstance the river levee remained undamaged.Meanwhile,this research analyzed the influence of three factors including the maximum surface subsidence wmax,half-length of surface subsidence basin L,and foundation coefficient k on the stability of river levees.Results showed that reducing the mining height of the working face and the foundation co-efficient,and increasing the strike length of the working face could reduce the influence of mining on river levees.These results provided a theoretical basis for predicting the mining-induced deformation and failure of river levees.展开更多
It is difficult to accurately calculate the lump coal rate in a fully mechanized mining face.Therefore,a numerical simulation of the coal wall cutting process,which revealed the crack expansion,development,evolution i...It is difficult to accurately calculate the lump coal rate in a fully mechanized mining face.Therefore,a numerical simulation of the coal wall cutting process,which revealed the crack expansion,development,evolution in the coal body and the corresponding lump coal formation mechanism,was performed in PFC2D.Moreover,a correlation was established between the cutting force and lump coal formation,and a statistical analysis method was proposed to determine the lump coal rate.The following conclusions are drawn from the results:(1)Based on a soft ball model,a coal wall cutting model is established.By setting the roller parameters based on linear bonding and simulating the roller cutting process of the coal body,the coal wall cutting process is effectively simulated,and accurate lump coal rate statistics are provided.(2)Under the cutting stress,the coal body in the working face underwent three stages—microfracture generation,fracture expansion,and fracture penetration—to form lump coal,in which the fracture direction is orthogonal to the cutting pressure chain.Within a certain range from the roller,as the cutting depth of the roller increased,the number of new fractures in the coal body first increases and then stabilizes.(3)Under the cutting stress,the fractured coal body is locally compressed,thereby forming a compact core.The formation and destruction of the compact core causes fluctuations in the cutting force.The fluctuation amplitude is positively related to the coal mass.(4)Because the simulation does not consider secondary damage in the coal,the simulated lump coal rate is larger than the actual lump coal rate in the working face;this deviation is mainly concentrated in large lump coal with a diameter greater than 300 mm.展开更多
Understanding the variations in microscopic pore-fracture structures(MPFS) during coal creep under pore pressure and stress coupling is crucial for coal mining and effective gas treatment. In this manuscript, a triaxi...Understanding the variations in microscopic pore-fracture structures(MPFS) during coal creep under pore pressure and stress coupling is crucial for coal mining and effective gas treatment. In this manuscript, a triaxial creep test on deep coal at various pore pressures using a test system that combines in-situ mechanical loading with real-time nuclear magnetic resonance(NMR) detection was conducted.Full-scale quantitative characterization, online real-time detection, and visualization of MPFS during coal creep influenced by pore pressure and stress coupling were performed using NMR and NMR imaging(NMRI) techniques. The results revealed that seepage pores and microfractures(SPM) undergo the most significant changes during coal creep, with creep failure gradually expanding from dense primary pore fractures. Pore pressure presence promotes MPFS development primarily by inhibiting SPM compression and encouraging adsorption pores(AP) to evolve into SPM. Coal enters the accelerated creep stage earlier at lower stress levels, resulting in more pronounced creep deformation. The connection between the micro and macro values was established, demonstrating that increased porosity at different pore pressures leads to a negative exponential decay of the viscosity coefficient. The Newton dashpot in the ideal viscoplastic body and the Burgers model was improved using NMR experimental results, and a creep model that considers pore pressure and stress coupling using variable-order fractional operators was developed. The model’s reasonableness was confirmed using creep experimental data. The damagestate adjustment factors ω and β were identified through a parameter sensitivity analysis to characterize the effect of pore pressure and stress coupling on the creep damage characteristics(size and degree of difficulty) of coal.展开更多
Non-pillar mining,top-coal caving and protected coal seam mining are the most popular mining methods in coal exploitation,and the different mining layouts will change the stress state and failure mechanism of coal in ...Non-pillar mining,top-coal caving and protected coal seam mining are the most popular mining methods in coal exploitation,and the different mining layouts will change the stress state and failure mechanism of coal in front of the working face.In this paper,mining-induced mechanical behaviors under three mining layouts have been simulated in the laboratory to investigate the effects of mining layouts on the deformation and strength of coal.Furthermore,the coal failure mechanism under different mining layouts is analyzed microscopically.The experimental results indicate that the stage characteristics of the coal deformation are obvious.Under the serial action of non-pillar mining,top-coal caving and protected coal seam mining layouts,the values of radial deformation,volume strain and Poisson's ratio increase,while the peak strength and deformation modulus decrease at the same buried depth,and the peak strength under non-pillar mining,top-coal caving and protected coal seam mining is about 3.0,2.5 and 2.0 times of the initial confining pressure,respectively.The results also indicate that the trend of the coal deformation decreases with the increase of the buried depth under the same mining layout,while the strength and deformation modulus increase,and the failure mechanism under three mining layouts is dominated with shear/tensile failure.展开更多
In semi-arid region of northwestern China, underground mining subsidence often results in decreased vegetation coverage, impoverishment of soil fertility and water stress. In addition, the physical-chemical and biolog...In semi-arid region of northwestern China, underground mining subsidence often results in decreased vegetation coverage, impoverishment of soil fertility and water stress. In addition, the physical-chemical and biological properties of soil also change, resulting in more susceptible to degradation. In particular, subsidence causes disturbance of the symbioses of plant and microbe that can play a beneficial role in the establishment of vegetation communities in degraded ecosystems. The objective of this study was to evaluate the effects of revegetation with exotic arbuscular mycorrhizal fungi(AMF) inoculum on the chemical and biological properties of soil over time in mining subsidence areas. Soils were sampled at a depth up to 30 cm in the adjacent rhizosphere of Amorpha fruticose Linn. from five reclaimed vegetation communities in northwestern China. In August 2015, a field trial was set up with five historical revegetation experiments established in 2008(7-year), 2011(4-year), 2012(3-year), 2013(2-year) and 2014(1-year), respectively. Each reclamation experiment included two treatments, i.e., revegetation with exotic AMF inoculum(AMF) and non-AMF inoculum(the control). Root mycorrhizal colonization, glomalin-related soil protein(GRSP), soil organic carbon(SOC), soil nutrients, and enzyme activities were also assessed. The results showed that mycorrhizal colonization of inoculated plants increased by 33.3%–163.0% compared to that of non-inoculated plants(P<0.05). Revegetation with exotic AMF inoculum also significantly improved total GRSR(T-GRSP) and easily extracted GRSP(EE-GRSP) concentrations compared to control, besides the T-GRSP in 1-year experiment and the EE-GRSP in 2-year experiment. A significant increase in SOC content was only observed in 7-year AMF reclaimed soils compared to non-AMF reclaimed soils. Soil total N(TN), Olsen phosphorus(P) and available potassium(K) were significantly higher in inoculated soil after 1–7 years of reclamation(except for individual cases), and increased with reclamation time(besides soil Olsen P). The exotic AMF inoculum markedly increased the average soil invertase, catalase, urease and alkaline phosphatase by 23.8%, 21.3%, 18.8% and 8.6%, respectively(P<0.01), compared with the control. Root mycorrhizal colonization was positively correlated with soil parameters(SOC, TN and soil available K) and soil enzyme activities(soil invertase, catalase, urease and alkaline phosphatase) in both AMF and non-AMF reclaimed soils(P<0.05), excluding availableK in non-AMF reclaimed soils. T-GRSP(P<0.01) and EE-GRSP(P<0.05) were significantly correlated with the majority of edaphic factors, except for soil Olsen P. The positive correlation between root mycorrhizal colonization and available K was observed in AMF reclaimed soils, indicating that the AMF reclaimed soil with a high root mycorrhizal colonization could potentially accumulate available K in soils. Our findings concluded that revegetation with exotic AMF inoculum influenced soil nutrient availability and enzyme activities in the semi-arid ecosystem, suggesting that inoculating AMF can be an effective method to improve soil fertility and support restoration of vegetation communities under poor conditions like soil nutrient deficiency and drought.展开更多
Fault is a common geological structure that has been revealed in the process of underground coal excavation and mining.The nature of its discontinuous structure controls the deformation,damage,and mechanics of the coa...Fault is a common geological structure that has been revealed in the process of underground coal excavation and mining.The nature of its discontinuous structure controls the deformation,damage,and mechanics of the coal or rock mass.The interaction between this discontinuous structure and mining activities is a key factor that dominates fault reactivation and the coal burst it can induce.This paper first summarizes investigations into the relationships between coal mining layouts and fault occurrences,along with relevant conceptual models for fault reactivation.Subsequently,it proposes mechanisms of fault reactivation and its induced coal burst based on the superposition of static and dynamic stresses,which include two kinds of fault reactivations from:mining-induced quasi-static stress(FRMSS)-dominated and seismic-based dynamic stress(FRSDS)-dominated.These two kinds of fault reactivations are then validated by the results of experimental investigations,numerical modeling,and in situ microseismic monitoring.On this basis,monitoring methods and prevention strategies for fault-induced coal burst are discussed and recommended.The results show that fault-induced coal burst is triggered by the superposition of high static stress in the fault pillar and dynamic stress from fault reactivation.High static stress comes from the interaction of the fault and the roof structure,and dynamic stress can be ascribed to FRMSS and FRSDS.The results in this paper could be of great significance in guiding the monitoring and prevention of fault-induced coal bursts.展开更多
Aerosol samples were collected in summer in Macao, a coastal city of the Pearl River Delta Region in China. Morphology, size, elemental composition, and mixing state of individual aerosol particles were determined by ...Aerosol samples were collected in summer in Macao, a coastal city of the Pearl River Delta Region in China. Morphology, size, elemental composition, and mixing state of individual aerosol particles were determined by scanning electron microscopy coupled energy dispersive X-ray （SEM/EDX） and transmission electron microscopy （TEM）. Based on the morphologies of 5711 aerosol particles, they consist of soot （32%）, mineral （17%）, secondary-（22%）, and unknown fine particles （29%）. The sizes of these particles were mostly distributed between 0.1 and 0.4 μm. Compositions of 202 mineral particles were obtained by SEM/EDX. Mineral particles were mainly classified into three types： Si-rich, Ca-rich, and Na-rich. The compositions of typical mineral particles can indicate their sources in sampling location. For example, mineral particles, collected along the main street, were associated with trace amounts of heavy metals, such as Zn, Ti, Mn, Ba, Pb, and As. TEM observations indicate that most Na-rich particles were aged sea salt particles （e.g., Na2SO4 and NaNO3） which formed through heterogeneous chemical reactions between sea salt and acidic gases. Additionally, aging time of soot was short in Macao due to high humidity, high temperature, and high levels of sunlight in Macao. Most of soot and fine mineral dust particles were internally mixed with secondary particles.展开更多
Coal mining often cause serious land degradation, soil erosion, and desertification affecting growth of the local vegetation, especially the roots. Arbuscular mycorrhizal fungi （AMF） inoculation is considered a pote...Coal mining often cause serious land degradation, soil erosion, and desertification affecting growth of the local vegetation, especially the roots. Arbuscular mycorrhizal fungi （AMF） inoculation is considered a potential biotechnological tool for mined soil remediation because mycorrhizal fungi could improve plant growth environment, especially under adverse conditions due to their good symbiosis. A field experiment was conducted to study the ecological effects of AMF （Funneliformis mosseae, Rhizophagus intraradices） on the growth of Amygdalus pedunculata Pall. and their root development in the regenerated mining subsidence sandy land. The reclamation experiment included four treatments： inoculation of Funneliformis mosseae （F.m）, inoculation of Rhizophagus intraradices （R.i）, combined inoculation of F.m and R.i and non-inoculated treatment. Root mycorrhizal colonization, plant height, crown width, soil moisture, root morphology and certain soil properties were assessed. The results showed that AMF improved the shoot and root growth of Amygdalus pedunculata Pall., and significantly increased root colonization after 1 year of inoculation. Available phosphorus content, activities of phosphatase as well as electrical conductivity in soil rhizosphere of all the three inoculation treatments were higher than that of the non-inoculated treatment. AMF increased the quantity of bacteria and fungi in soil rhizosphere compared with the non-inoculated treatment. Our study indicates that revegetation with AMF inoculum could influence plant growth and root development as well as soil properties, suggesting that AMF inoculation can be effective method for further ecological restoration in coal mine subsided areas.展开更多
Inertinite maceral compositions of the Late Permian coals from three sections in the terrestrial and paralic settings of eastern Yunnan are analyzed in order to reveal the paleo-fire events and the atmospheric oxygen ...Inertinite maceral compositions of the Late Permian coals from three sections in the terrestrial and paralic settings of eastern Yunnan are analyzed in order to reveal the paleo-fire events and the atmospheric oxygen levels in the latest Permian. Although the macerals in the studied sections are generally dominated by vitrinite, the inertinite group makes up a considerable proportion. Its content increases upward from the beginning of the Late Permian to the coal seam near the Permian- Triassic boundary. Based on the microscopic features and the prevailing theory that inertinite is largely a by-product of paleo-fires, we suggest that the increasing upward trend of the inertinite abundance in the latest Permian could imply that the Late Permian peatland had suffered from frequent wildfires. Since ignition and burning depend on sufficient oxygen, a model-based calculation suggests that the 02 levels near the Wuchiapingian/Changhsingian boundary and the Permian-Triassic boundary are 27% and 28% respectively. This output adds supports to other discoveries made in the temporal marine and terrestrial sediments, and challenges the theories advocating hypoxia as a mechanism for the PermianTriassic boundary crisis.展开更多
基金The authors gratefully acknowledge the financial support provided by the State Key Research Development Program of China (Grant Number 2016YFC0600705)the National Natural Science Foundation of China (Grant Numbers 51674251, 51727807, and 51374213)+1 种基金the National Major Project for Science and Technology (Grant Number 2017ZX05049003-006)and the Innovation Teams of Ten-thousand Talents Program sponsored by the Ministry of Science and Technology of China (Grant Number 2016RA4067).
文摘Traditional coal mining and utilisation patterns are severely detrimental to natural resources and environments and significantly impede safe, low-carbon, clean, and sustainable utilisation of coal resources. Based on the idea of in situ fluidized coal mining that aims to transform solid coal into liquid or gas and transports the fluidized resources to the ground to ensure safe mining and low-carbon and clean utilisation, in this study, we report on a novel in situ unmanned automatic mining method. This includes a flexible, earthworm-like unmanned automatic mining machine (UAMM) and a coal mine layout for in situ fluidized coal mining suitable for the UAMM. The technological and economic advantages and the carbon emission reduction of the UAMM-based in situ fluidized mining in contrast to traditional mining technologies are evaluated as well. The development trends and possible challenges to this design are also discussed. It is estimated that the proposed method costs approximately 49% of traditional coal mining costs. The UAMM-based in situ fluidized mining and transformation method will reduce CO2 emissions by at least 94.9% compared to traditional coal mining and utilisation methods. The proposed approach is expected to achieve safe and environmentally friendly coal mining as well as lowcarbon and clean utilisation of coal.
基金financially supported by the National Natural Science Foundation of China(No.52204084)the Open Research Fund of the State Key Laboratory of Coal Resources and safe Mining,CUMT,China(No.SKLCRSM 23KF004)+3 种基金the Interdisciplinary Research Project for Young Teachers of USTB(Fundamental Research Funds for the Central Universities),China(No.FRF-IDRY-GD22-002)the Fundamental Research Funds for the Central Universities and the Youth Teacher International Exchange and Growth Program,China(No.QNXM20220009)the National Key R&D Program of China(Nos.2022YFC2905600 and 2022 YFC3004601)the Science,Technology&Innovation Project of Xiongan New Area,China(No.2023XAGG0061)。
文摘Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.
基金supported by the National Natural Science Foundation of China(Nos.52225402 and U1910206).
文摘Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.
基金supported by Yunlong Lake Laboratory of Deep Underground Science and Engineering Project(Grant No.104024003)the Natural Science Foundation of the Jiangsu Provincial Basic Research Program(Grant No.BK20220024)the Open Sharing Fund for the large-scale instruments and equipment of the China University of Mining and Technology(Grant No.DYGX-2023-044).
文摘Fiber-reinforced polymer(FRP)wrapping is a potential technique for coal pillar reinforcement.In this study,an acoustic emission(AE)technique was employed to monitor coal specimens with carbon FRP(CFRP)jackets during uniaxial compression,which addressed the inability to observe the cracks inside the FRP-reinforced coal pillars by conventional field inspection techniques.The spatiotemporal fractal evolution of the cumulated AE events during loading was investigated based on fractal theory.The results indicated that the AE response and fractal features of the coal specimens were closely related to their damage evolution,with CFRP exerting a significant influence.In particular,during the unstable crack development stage,the evolutionary patterns of the AE count and energy curves of the CFRPconfined specimens underwent a transformation from the slight shockemajor shock type to the slight shockesub-major shockeslight shockemajor shock type,in contrast to the unconfined coal specimens.The AE b-values decreased to a minimum and then increased marginally.The AE spatial fractal dimension increased rapidly,whereas the AE temporal fractal dimension fluctuated significantly during the accumulation and release of strain energy.Ultimately,based on the AE count and AE energy evolution,a damage factor was proposed for the coal samples with CFRP jackets.Furthermore,a damage constitutive model was established,considering the CFRP jacket and the compaction characteristics of the coal.This model provides an effective description of the stressestrain relationship of coal specimens with CFRP jackets.
基金support from Australian Research Council(Grant No.LP200301404)support from the Fundamental Research Funds for the Central Universities(Grant No.2020CXNL02)is also much appreciated.
文摘The control and management of mining-induced seismic hazards have attracted ever-rising attention,especially in underground longwall coal mines,where continuous mining activities dynamically alter the stress states and induce seismic events.In this work,the Epidemic Type Aftershock Sequence(ETAS)model was applied to formulate the aftershock catalogue of mining-induced seismicity and investigate the formation of event triggering associated with longwall mining.The conventional Baiesi and Paczuski method(2004)was used to separate longwall mining-induced seismic events into triggered and nontriggered catalogues.The latter catalogue contains both non-triggering(NT)-isolated events that do not trigger subsequent events and NT-parent events of the former catalogue.Statistical properties of triggered events were analysed spatially and temporally.The temporal triggering sequence follows the Omori-Utsu law,where the temporal decay of aftershocks is influenced by the magnitude of NT-parent events in mining-induced seismicity.The spatial distribution of aftershocks follows an inverted U-shaped relationship with distance to their corresponding NT-parent events.The quantitative forecasting of triggered events was performed based on the nonhomogeneous Poisson distribution,which achieved a good consistency with their NT-parent events.Amongst the non-triggered catalogue,NT-isolated events are concentrated ahead of NT-parent events,potentially acting as foreshocks for the latter.
基金funded by the National Natural Science Foundation of China(52004201,52274143,52204153)China Postdoctoral Science Foundation(2021T140551).
文摘Coal-rock interface identification technology was pivotal in automatically adjusting the shearer's cutting drum during coal mining.However,it also served as a technical bottleneck hindering the advancement of intelligent coal mining.This study aimed to address the poor accuracy of current coal-rock identification technology on comprehensive working faces,coupled with the limited availability of coal-rock datasets.The loss function of the SegFormer model was enhanced,the model's hyperparameters and learning rate were adjusted,and an automatic recognition method was proposed for coal-rock interfaces based on FL-SegFormer.Additionally,an experimental platform was constructed to simulate the dusty environment during coal-rock cutting by the shearer,enabling the collection of coal-rock test image datasets.The morphology-based algorithms were employed to expand the coal-rock image datasets through image rotation,color dithering,and Gaussian noise injection so as to augment the diversity and applicability of the datasets.As a result,a coal-rock image dataset comprising 8424 samples was generated.The findings demonstrated that the FL-SegFormer model achieved a Mean Intersection over Union(MIoU)and mean pixel accuracy(MPA)of 97.72%and 98.83%,respectively.The FLSegFormer model outperformed other models in terms of recognition accuracy,as evidenced by an MloU exceeding 95.70% of the original image.Furthermore,the FL-SegFormer model using original coal-rock images was validated from No.15205 working face of the Yulin test mine in northern Shaanxi.The calculated average error was only 1.77%,and the model operated at a rate of 46.96 frames per second,meeting the practical application and deployment requirements in underground settings.These results provided a theoretical foundation for achieving automatic and efficient mining with coal mining machines and the intelligent development of coal mines.
基金supported by the National Natural Science Foundation of China(51174285,51104150)the Research and Innovation Project for College Graduates of Jiangsu Province(CXZZ12_0949)the National Twelfth-Five Year Research Program of China(2012BAK09B01).
文摘As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock burst induced by the combination of dynamic and static stresses and divided such rock burst into three types,including induced by primary dynamic stress,mainly induced by dynamic stress,and by dynamic stress in low critical stress state.The expressions of the static stress induced by coal mining and dynamic stress induced by mining tremors were obtained.Moreover,theories and technologies at home and abroad were summarized concerning the monitoring,forecasting,and preventing of rockburst.These mainly include the zoning and leveling forecasting method,electromagnetic radiation technology,elastic wave and seismic wave computed tomography technologies in aspect of rockburst monitoring,as well as the intensity weakening theory,the strong-soft-strong structure effect,the directional hydraulic fracturing technology,the roadway support system in regards of rockburst prevention.The prospect of rockburst development suggested that researches concerning the rockburst mechanism should be quantitatively developed around the roadway and coalface surrounding coal-rock mass.It should be focused on the rockburst mechanism and prevention technology of mining with over 1,000 km deep and mining in large tectonic zone.In addition,the monitoring and prevention of rockburst should be based on rockburst mechanism.
基金Acknowledgments This work is supported by the National Key Basic Research Program of China （2013CB227903） and the National Natural Science Foundation of China （U1361209）.
文摘According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary and auxiliary boxes, power transmission system, mining system, loading system, gas charging system, data monitoring and intelligent acquisition system. The maximum experiment coal consumption is 1200 kg, the mining system is developed to conduct experiment for gas desorption under excavating disturbance, and the plane-charging cribriform ventilation device is developed to realize uniform ventilation for experiment coal sample, which is accord with the actual gas source situation of coal bed. The desorption characteristics of gas in coal are experimentally studied under the conditions of nature and mining using the experiment system. The results show that, compare with nature condition, the permeability of coal and the velocity of gas desorption could significantly increase under the influence of coal pressure relief and destruction caused by mining, and the degree of gas desorption could somewhat increase too. Finally, pressure relief gas extraction of current seam and adjacent seams after mining in a certain coal mine of Yangquan mining area are introduced, and the gas desorption experiment results is verified by analyzing the effect of gas extraction.
基金provided by the National Natural Science Foundation of China(No.51674132)the State Key Research Development Program of China(No.2016YFC0801407-2)+3 种基金the Research Fund of The State Key Laboratory of Coal Resources and Safe Mining,CUMT(No.SKLCRSM15KF04)Natural Science Foundation of Liaoning Province(No.2015020614)Liaoning BaiQianWan Talents Program(No.201575)the Research Fund of State and Local Joint Engineering Laboratory for Gas Drainage & Ground Control of Deep Mines(Henan Polytechnic University)(No.G201602)
文摘Mining induced pressures are strong and overburden failure areas are large in top coal caving longwall mining, which constrains high production and safety mining. By employing the combination of the full view borehole photography technique and the seismic CT scanner technique, the deformation and failure of overlying strata of fully mechanized caving face in shallow coal seam were studied and the failure development of overburden was determined. Results show that the full view borehole photography can reveal the characteristics of strata, and the seismic CT scanner can reflect the characteristics of strata between the boreholes. The combined measurement technique can effectively determine the height of fractured and caved zones. The top end of the caved zone in Yangwangou coal mine employing the top coal caving longwall mining was at the depth of 171 m and fractured zone was at the depth of 106-110 m. The results provide a theoretic foundation for controlling the overburden strata in the shallow buried top coal caving panel.
基金supported by the National Key R&D Program of China (2022YFC3004701)the National Natural Science Foundation of China (52274242,51904293)+1 种基金the Natural Science Foundation of Jiangsu Province (BK20190627)the China Postdoctoral Science Foundation (2019M661998).
文摘In the process of green and smart mine construction under the context of carbon neutrality,China's coal safety situation has been continuously improved in recent years.In order to recognize the development of coal production in China and prepare for future monitoring and prevention of safety incidents,this study mainly elaborated on the basic situation of coal resources and national mining accidents over the past five years(2017-2021),from four dimensions(accident level,type,region,and time),and then proposed the preventive measures based on accident statistical laws.The results show that the storage of coal resources has obvious geographic characteristics,mainly concentrated in the Midwest,with coal resources in Shanxi and Shaanxi accounting for about 49.4%.The proportion of coal consumption has dropped from 70.2%to 56%between 2011 and 2021,but still accounts for more than half of the all.Meanwhile,the accident-prone areas are positively correlated with the amount of coal production.Among different levels of coal mine accidents,general accidents had the highest number of accidents and deaths,with 692 accidents and 783 deaths,accounting for 87.6%and 54.64%respectively.The frequency of roof,gas,and transportation accidents is relatively high,and the number of single fatalities caused by gas accidents is the largest,about 4.18.In terms of geographical distribution of accidents,the safety situation in Shanxi Province is the most severe.From the time distribution of coal mine accidents,the accidents mainly occurred in July and August,and rarely occurred in February and December.Finally,the"4+4"safety management model is proposed,combining the statistical results with coal production in China.Based on the existing health and safety management systems,the manage-ments are divided into four sub-categories,and more specific measures are suggested.
基金funds supported by the State Key Basic Research Project of China(No.2011CB201201)
文摘The coupling mechanism between mining-induced mechanical behavior and gas permeability of coal is effectively obtained in laboratory.This study means significant understanding of the prevention of coal-gas outburst.The testing samples of coal were drilled from the 14120 mining face at the depth of690 m.Based on the redistribution of stress during the excavation,the coupling test between mechanical state and seepage has been designed using the triaxial servo-controlled seepage equipment for thermofluid-solid coupling of coal containing methane.It is the result that there are two main factors influencing the mining-induced mechanical behavior of coal,such as the change ofσ_1-σ_3 andΔσ_1-Δσ_3.The failure mode mainly depends on the value ofσ_1-σ_3,and the peak strength value mainly depends on the value ofΔσ_1-Δσ_3.The difference of mechanical response between geostress and mining-induced stress has been obtained,which can be a theoretical support for safe mining such as reasonable gas drainage,prevention of coal-gas outburst and gas over-limit.
文摘To study the influence of coal mining on the stability of river levees,a mechanical model of mining-induced river levee deformation was established.This was based on the mining-induced deformation characteristics of river levees and the application of a typical surface subsidence function.Meanwhile,a failure criterion was proposed for river levees.Using some examples,the deformation of,and stress distribution through,river levees under the influence of mining were obtained:the maximum tensile stress on the bottom of the river levee was less than the tensile strength,under which circumstance the river levee remained undamaged.Meanwhile,this research analyzed the influence of three factors including the maximum surface subsidence wmax,half-length of surface subsidence basin L,and foundation coefficient k on the stability of river levees.Results showed that reducing the mining height of the working face and the foundation co-efficient,and increasing the strike length of the working face could reduce the influence of mining on river levees.These results provided a theoretical basis for predicting the mining-induced deformation and failure of river levees.
基金The funding was supported by National Natural Science Foundation of China(No.51974294).
文摘It is difficult to accurately calculate the lump coal rate in a fully mechanized mining face.Therefore,a numerical simulation of the coal wall cutting process,which revealed the crack expansion,development,evolution in the coal body and the corresponding lump coal formation mechanism,was performed in PFC2D.Moreover,a correlation was established between the cutting force and lump coal formation,and a statistical analysis method was proposed to determine the lump coal rate.The following conclusions are drawn from the results:(1)Based on a soft ball model,a coal wall cutting model is established.By setting the roller parameters based on linear bonding and simulating the roller cutting process of the coal body,the coal wall cutting process is effectively simulated,and accurate lump coal rate statistics are provided.(2)Under the cutting stress,the coal body in the working face underwent three stages—microfracture generation,fracture expansion,and fracture penetration—to form lump coal,in which the fracture direction is orthogonal to the cutting pressure chain.Within a certain range from the roller,as the cutting depth of the roller increased,the number of new fractures in the coal body first increases and then stabilizes.(3)Under the cutting stress,the fractured coal body is locally compressed,thereby forming a compact core.The formation and destruction of the compact core causes fluctuations in the cutting force.The fluctuation amplitude is positively related to the coal mass.(4)Because the simulation does not consider secondary damage in the coal,the simulated lump coal rate is larger than the actual lump coal rate in the working face;this deviation is mainly concentrated in large lump coal with a diameter greater than 300 mm.
基金supported by the National Natural Science Foundation of China(Nos.52121003,51827901 and 52204110)China Postdoctoral Science Foundation(No.2022M722346)+1 种基金the 111 Project(No.B14006)the Yueqi Outstanding Scholar Program of CUMTB(No.2017A03).
文摘Understanding the variations in microscopic pore-fracture structures(MPFS) during coal creep under pore pressure and stress coupling is crucial for coal mining and effective gas treatment. In this manuscript, a triaxial creep test on deep coal at various pore pressures using a test system that combines in-situ mechanical loading with real-time nuclear magnetic resonance(NMR) detection was conducted.Full-scale quantitative characterization, online real-time detection, and visualization of MPFS during coal creep influenced by pore pressure and stress coupling were performed using NMR and NMR imaging(NMRI) techniques. The results revealed that seepage pores and microfractures(SPM) undergo the most significant changes during coal creep, with creep failure gradually expanding from dense primary pore fractures. Pore pressure presence promotes MPFS development primarily by inhibiting SPM compression and encouraging adsorption pores(AP) to evolve into SPM. Coal enters the accelerated creep stage earlier at lower stress levels, resulting in more pronounced creep deformation. The connection between the micro and macro values was established, demonstrating that increased porosity at different pore pressures leads to a negative exponential decay of the viscosity coefficient. The Newton dashpot in the ideal viscoplastic body and the Burgers model was improved using NMR experimental results, and a creep model that considers pore pressure and stress coupling using variable-order fractional operators was developed. The model’s reasonableness was confirmed using creep experimental data. The damagestate adjustment factors ω and β were identified through a parameter sensitivity analysis to characterize the effect of pore pressure and stress coupling on the creep damage characteristics(size and degree of difficulty) of coal.
基金funded by the State Key Basic Research Program of China(No.2011CB201201)the National Key TechnologyR&D Program(No.2008BAB36B07)the National Natural Science Foundation of China(Nos.51134018 and 50674092)
文摘Non-pillar mining,top-coal caving and protected coal seam mining are the most popular mining methods in coal exploitation,and the different mining layouts will change the stress state and failure mechanism of coal in front of the working face.In this paper,mining-induced mechanical behaviors under three mining layouts have been simulated in the laboratory to investigate the effects of mining layouts on the deformation and strength of coal.Furthermore,the coal failure mechanism under different mining layouts is analyzed microscopically.The experimental results indicate that the stage characteristics of the coal deformation are obvious.Under the serial action of non-pillar mining,top-coal caving and protected coal seam mining layouts,the values of radial deformation,volume strain and Poisson's ratio increase,while the peak strength and deformation modulus decrease at the same buried depth,and the peak strength under non-pillar mining,top-coal caving and protected coal seam mining is about 3.0,2.5 and 2.0 times of the initial confining pressure,respectively.The results also indicate that the trend of the coal deformation decreases with the increase of the buried depth under the same mining layout,while the strength and deformation modulus increase,and the failure mechanism under three mining layouts is dominated with shear/tensile failure.
基金funded by the National Natural Science Foundation of China (51574253)the National High Technology Research and Development Program of China (2013AA102904)the Open Research Project of the State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology (Beijing) (SKLCRSM16KFA01)
文摘In semi-arid region of northwestern China, underground mining subsidence often results in decreased vegetation coverage, impoverishment of soil fertility and water stress. In addition, the physical-chemical and biological properties of soil also change, resulting in more susceptible to degradation. In particular, subsidence causes disturbance of the symbioses of plant and microbe that can play a beneficial role in the establishment of vegetation communities in degraded ecosystems. The objective of this study was to evaluate the effects of revegetation with exotic arbuscular mycorrhizal fungi(AMF) inoculum on the chemical and biological properties of soil over time in mining subsidence areas. Soils were sampled at a depth up to 30 cm in the adjacent rhizosphere of Amorpha fruticose Linn. from five reclaimed vegetation communities in northwestern China. In August 2015, a field trial was set up with five historical revegetation experiments established in 2008(7-year), 2011(4-year), 2012(3-year), 2013(2-year) and 2014(1-year), respectively. Each reclamation experiment included two treatments, i.e., revegetation with exotic AMF inoculum(AMF) and non-AMF inoculum(the control). Root mycorrhizal colonization, glomalin-related soil protein(GRSP), soil organic carbon(SOC), soil nutrients, and enzyme activities were also assessed. The results showed that mycorrhizal colonization of inoculated plants increased by 33.3%–163.0% compared to that of non-inoculated plants(P<0.05). Revegetation with exotic AMF inoculum also significantly improved total GRSR(T-GRSP) and easily extracted GRSP(EE-GRSP) concentrations compared to control, besides the T-GRSP in 1-year experiment and the EE-GRSP in 2-year experiment. A significant increase in SOC content was only observed in 7-year AMF reclaimed soils compared to non-AMF reclaimed soils. Soil total N(TN), Olsen phosphorus(P) and available potassium(K) were significantly higher in inoculated soil after 1–7 years of reclamation(except for individual cases), and increased with reclamation time(besides soil Olsen P). The exotic AMF inoculum markedly increased the average soil invertase, catalase, urease and alkaline phosphatase by 23.8%, 21.3%, 18.8% and 8.6%, respectively(P<0.01), compared with the control. Root mycorrhizal colonization was positively correlated with soil parameters(SOC, TN and soil available K) and soil enzyme activities(soil invertase, catalase, urease and alkaline phosphatase) in both AMF and non-AMF reclaimed soils(P<0.05), excluding availableK in non-AMF reclaimed soils. T-GRSP(P<0.01) and EE-GRSP(P<0.05) were significantly correlated with the majority of edaphic factors, except for soil Olsen P. The positive correlation between root mycorrhizal colonization and available K was observed in AMF reclaimed soils, indicating that the AMF reclaimed soil with a high root mycorrhizal colonization could potentially accumulate available K in soils. Our findings concluded that revegetation with exotic AMF inoculum influenced soil nutrient availability and enzyme activities in the semi-arid ecosystem, suggesting that inoculating AMF can be an effective method to improve soil fertility and support restoration of vegetation communities under poor conditions like soil nutrient deficiency and drought.
基金This research was carried out by the following funded projects:National Natural Science Foundation of China(51604270,51874292,and 51804303)Fundamental Research Funds for the Central Universities(2017QNA26)+2 种基金Natural Science Foundation of Jiangsu Province(BK20180643)Independent Research Projects of State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology(SKLCRSM15X04)The first author also acknowledges the China Postdoctoral Council International Postdoctoral Exchange Fellowship Program(20170060).
文摘Fault is a common geological structure that has been revealed in the process of underground coal excavation and mining.The nature of its discontinuous structure controls the deformation,damage,and mechanics of the coal or rock mass.The interaction between this discontinuous structure and mining activities is a key factor that dominates fault reactivation and the coal burst it can induce.This paper first summarizes investigations into the relationships between coal mining layouts and fault occurrences,along with relevant conceptual models for fault reactivation.Subsequently,it proposes mechanisms of fault reactivation and its induced coal burst based on the superposition of static and dynamic stresses,which include two kinds of fault reactivations from:mining-induced quasi-static stress(FRMSS)-dominated and seismic-based dynamic stress(FRSDS)-dominated.These two kinds of fault reactivations are then validated by the results of experimental investigations,numerical modeling,and in situ microseismic monitoring.On this basis,monitoring methods and prevention strategies for fault-induced coal burst are discussed and recommended.The results show that fault-induced coal burst is triggered by the superposition of high static stress in the fault pillar and dynamic stress from fault reactivation.High static stress comes from the interaction of the fault and the roof structure,and dynamic stress can be ascribed to FRMSS and FRSDS.The results in this paper could be of great significance in guiding the monitoring and prevention of fault-induced coal bursts.
基金supported by the National Basic Research Program (973) of China (No.2006CB403701)the Macao Foundation for Development of Science and Technology (No.023/2006/A)+3 种基金the State Key Laboratory of Coal Resources and Safe Mining (China University of Mining and Technology) (No.SKLCRSM09KFB04)the China Postdoctoral Science Foundation Funded Project(No.20090461213)the Shandong Postdoctoral Science Innovation Foundation (No.200902016)the Independent Innovation Foundation of Shandong University
文摘Aerosol samples were collected in summer in Macao, a coastal city of the Pearl River Delta Region in China. Morphology, size, elemental composition, and mixing state of individual aerosol particles were determined by scanning electron microscopy coupled energy dispersive X-ray （SEM/EDX） and transmission electron microscopy （TEM）. Based on the morphologies of 5711 aerosol particles, they consist of soot （32%）, mineral （17%）, secondary-（22%）, and unknown fine particles （29%）. The sizes of these particles were mostly distributed between 0.1 and 0.4 μm. Compositions of 202 mineral particles were obtained by SEM/EDX. Mineral particles were mainly classified into three types： Si-rich, Ca-rich, and Na-rich. The compositions of typical mineral particles can indicate their sources in sampling location. For example, mineral particles, collected along the main street, were associated with trace amounts of heavy metals, such as Zn, Ti, Mn, Ba, Pb, and As. TEM observations indicate that most Na-rich particles were aged sea salt particles （e.g., Na2SO4 and NaNO3） which formed through heterogeneous chemical reactions between sea salt and acidic gases. Additionally, aging time of soot was short in Macao due to high humidity, high temperature, and high levels of sunlight in Macao. Most of soot and fine mineral dust particles were internally mixed with secondary particles.
基金The study was financially supported by the National Natural Science Foundation of China （51574253） and the National Key Research and Development Program of China （2016YFC0501106）.
文摘Coal mining often cause serious land degradation, soil erosion, and desertification affecting growth of the local vegetation, especially the roots. Arbuscular mycorrhizal fungi （AMF） inoculation is considered a potential biotechnological tool for mined soil remediation because mycorrhizal fungi could improve plant growth environment, especially under adverse conditions due to their good symbiosis. A field experiment was conducted to study the ecological effects of AMF （Funneliformis mosseae, Rhizophagus intraradices） on the growth of Amygdalus pedunculata Pall. and their root development in the regenerated mining subsidence sandy land. The reclamation experiment included four treatments： inoculation of Funneliformis mosseae （F.m）, inoculation of Rhizophagus intraradices （R.i）, combined inoculation of F.m and R.i and non-inoculated treatment. Root mycorrhizal colonization, plant height, crown width, soil moisture, root morphology and certain soil properties were assessed. The results showed that AMF improved the shoot and root growth of Amygdalus pedunculata Pall., and significantly increased root colonization after 1 year of inoculation. Available phosphorus content, activities of phosphatase as well as electrical conductivity in soil rhizosphere of all the three inoculation treatments were higher than that of the non-inoculated treatment. AMF increased the quantity of bacteria and fungi in soil rhizosphere compared with the non-inoculated treatment. Our study indicates that revegetation with AMF inoculum could influence plant growth and root development as well as soil properties, suggesting that AMF inoculation can be effective method for further ecological restoration in coal mine subsided areas.
基金supported by the National Natural Science Foundation of China(41030213)the Major National S&T Program of China(2011ZX05033-002 and 2011ZX05009-002)the Fundamental Research Funds for the Central Universities in China(2010YD09)
文摘Inertinite maceral compositions of the Late Permian coals from three sections in the terrestrial and paralic settings of eastern Yunnan are analyzed in order to reveal the paleo-fire events and the atmospheric oxygen levels in the latest Permian. Although the macerals in the studied sections are generally dominated by vitrinite, the inertinite group makes up a considerable proportion. Its content increases upward from the beginning of the Late Permian to the coal seam near the Permian- Triassic boundary. Based on the microscopic features and the prevailing theory that inertinite is largely a by-product of paleo-fires, we suggest that the increasing upward trend of the inertinite abundance in the latest Permian could imply that the Late Permian peatland had suffered from frequent wildfires. Since ignition and burning depend on sufficient oxygen, a model-based calculation suggests that the 02 levels near the Wuchiapingian/Changhsingian boundary and the Permian-Triassic boundary are 27% and 28% respectively. This output adds supports to other discoveries made in the temporal marine and terrestrial sediments, and challenges the theories advocating hypoxia as a mechanism for the PermianTriassic boundary crisis.
